ide-tape: remove IDETAPE_DEBUG_INFO
authorBorislav Petkov <bbpetkov@yahoo.de>
Sat, 2 Feb 2008 18:56:49 +0000 (19:56 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 2 Feb 2008 18:56:49 +0000 (19:56 +0100)
The device capabilities are probed for during device initialization so this
info is available through proc/ioctl() und it is redundant here.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-tape.c

index bbf60ee582bb72b4b09c744c1b4f68581bf46601..99084663a7c09ab83660d0d9c83180fad4659afd 100644 (file)
@@ -106,7 +106,6 @@ typedef struct os_dat_s {
 /*
  *     The following are used to debug the driver:
  *
- *     Setting IDETAPE_DEBUG_INFO to 1 will report device capabilities.
  *     Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control.
  *     Setting IDETAPE_DEBUG_BUGS to 1 will enable self-sanity checks in
  *     some places.
@@ -121,7 +120,6 @@ typedef struct os_dat_s {
  *     is verified to be stable enough. This will make it much more
  *     esthetic.
  */
-#define IDETAPE_DEBUG_INFO             0
 #define IDETAPE_DEBUG_LOG              0
 #define IDETAPE_DEBUG_BUGS             1
 
@@ -3815,41 +3813,6 @@ static int idetape_identify_device (ide_drive_t *drive)
 
        *((unsigned short *) &gcw) = id->config;
 
-#if IDETAPE_DEBUG_INFO
-       printk(KERN_INFO "ide-tape: Dumping ATAPI Identify Device tape parameters\n");
-       printk(KERN_INFO "ide-tape: Protocol Type: ");
-       switch (gcw.protocol) {
-               case 0: case 1: printk("ATA\n");break;
-               case 2: printk("ATAPI\n");break;
-               case 3: printk("Reserved (Unknown to ide-tape)\n");break;
-       }
-       printk(KERN_INFO "ide-tape: Device Type: %x - ",gcw.device_type);       
-       switch (gcw.device_type) {
-               case 0: printk("Direct-access Device\n");break;
-               case 1: printk("Streaming Tape Device\n");break;
-               case 2: case 3: case 4: printk("Reserved\n");break;
-               case 5: printk("CD-ROM Device\n");break;
-               case 6: printk("Reserved\n");
-               case 7: printk("Optical memory Device\n");break;
-               case 0x1f: printk("Unknown or no Device type\n");break;
-               default: printk("Reserved\n");
-       }
-       printk(KERN_INFO "ide-tape: Removable: %s",gcw.removable ? "Yes\n":"No\n");     
-       printk(KERN_INFO "ide-tape: Command Packet DRQ Type: ");
-       switch (gcw.drq_type) {
-               case 0: printk("Microprocessor DRQ\n");break;
-               case 1: printk("Interrupt DRQ\n");break;
-               case 2: printk("Accelerated DRQ\n");break;
-               case 3: printk("Reserved\n");break;
-       }
-       printk(KERN_INFO "ide-tape: Command Packet Size: ");
-       switch (gcw.packet_size) {
-               case 0: printk("12 bytes\n");break;
-               case 1: printk("16 bytes\n");break;
-               default: printk("Reserved\n");break;
-       }
-#endif /* IDETAPE_DEBUG_INFO */
-
        /* Check that we can support this device */
 
        if (gcw.protocol != 2)
@@ -3938,38 +3901,6 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive)
                tape->tape_block_size = 512;
        else if (capabilities->blk1024)
                tape->tape_block_size = 1024;
-
-#if IDETAPE_DEBUG_INFO
-       printk(KERN_INFO "ide-tape: Dumping the results of the MODE SENSE packet command\n");
-       printk(KERN_INFO "ide-tape: Mode Parameter Header:\n");
-       printk(KERN_INFO "ide-tape: Mode Data Length - %d\n", pc.buffer[0]);
-       printk(KERN_INFO "ide-tape: Medium Type - %d\n", pc.buffer[1]);
-       printk(KERN_INFO "ide-tape: Device Specific Parameter - %d\n",
-                       pc.buffer[2]);
-       printk(KERN_INFO "ide-tape: Block Descriptor Length - %d\n",
-                       pc.buffer[3]);
-
-       printk(KERN_INFO "ide-tape: Capabilities and Mechanical Status Page:\n");
-       printk(KERN_INFO "ide-tape: Page code - %d\n",capabilities->page_code);
-       printk(KERN_INFO "ide-tape: Page length - %d\n",capabilities->page_length);
-       printk(KERN_INFO "ide-tape: Read only - %s\n",capabilities->ro ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports reverse space - %s\n",capabilities->sprev ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports erase initiated formatting - %s\n",capabilities->efmt ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports QFA two Partition format - %s\n",capabilities->qfa ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports locking the medium - %s\n",capabilities->lock ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: The volume is currently locked - %s\n",capabilities->locked ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: The device defaults in the prevent state - %s\n",capabilities->prevent ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports ejecting the medium - %s\n",capabilities->eject ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports error correction - %s\n",capabilities->ecc ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports data compression - %s\n",capabilities->cmprs ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports 512 bytes block size - %s\n",capabilities->blk512 ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports 1024 bytes block size - %s\n",capabilities->blk1024 ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Supports 32768 bytes block size / Restricted byte count for PIO transfers - %s\n",capabilities->blk32768 ? "Yes":"No");
-       printk(KERN_INFO "ide-tape: Maximum supported speed in KBps - %d\n",capabilities->max_speed);
-       printk(KERN_INFO "ide-tape: Continuous transfer limits in blocks - %d\n",capabilities->ctl);
-       printk(KERN_INFO "ide-tape: Current speed in KBps - %d\n",capabilities->speed); 
-       printk(KERN_INFO "ide-tape: Buffer size - %d\n",capabilities->buffer_size*512);
-#endif /* IDETAPE_DEBUG_INFO */
 }
 
 /*
@@ -3995,10 +3926,6 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive)
        block_descrp = (idetape_parameter_block_descriptor_t *)(pc.buffer + 4);
        tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2];
        tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
-
-#if IDETAPE_DEBUG_INFO
-       printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size);
-#endif /* IDETAPE_DEBUG_INFO */
 }
 
 #ifdef CONFIG_IDE_PROC_FS