V4L/DVB (5607): M920x: Initial support for devices likely manufactured by Dposh
authorAapo Tahkola <aet@rasterburn.org>
Thu, 22 Mar 2007 20:37:58 +0000 (17:37 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 9 May 2007 13:12:58 +0000 (10:12 -0300)
These devices are sold by various companies and chains not involved in
hardware manufacturing business. This particular device owned by
winisch (from irc) had a sticker with text "TCM 234292" on it. This device
was never opened so it is possible that Dposh did not manufacture this
stick. However, the bundled software and their product line points into
that direction. Also thanks to Michael Krufky for spotting this hw
filtering problem and thus avoiding hair loss.
Hardware pid filters and the bundled remote controller are not currently
supported on this device.

Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/dvb-usb/dvb-usb-ids.h
drivers/media/dvb/dvb-usb/m920x.c

index dffce1d4ecd31e3a88122d76c41727fbf16c8c37..403081689de1bdc30b1d339d7775f36cb479e133 100644 (file)
@@ -19,6 +19,7 @@
 #define USB_VID_COMPRO_UNK                     0x145f
 #define USB_VID_CYPRESS                                0x04b4
 #define USB_VID_DIBCOM                         0x10b8
+#define USB_VID_DPOSH                          0x1498
 #define USB_VID_DVICO                          0x0fe9
 #define USB_VID_EMPIA                          0xeb1a
 #define USB_VID_GENPIX                         0x09c0
@@ -61,6 +62,8 @@
 #define USB_PID_DIBCOM_STK7700P                                0x1e14
 #define USB_PID_DIBCOM_STK7700P_PC                     0x1e78
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD                        0x2131
+#define USB_PID_DPOSH_M9206_COLD                       0x9206
+#define USB_PID_DPOSH_M9206_WARM                       0xa090
 #define USB_PID_UNIWILL_STK7700P                       0x6003
 #define USB_PID_GRANDTEC_DVBT_USB_COLD                 0x0fa0
 #define USB_PID_GRANDTEC_DVBT_USB_WARM                 0x0fa1
index 233e04d346a5e7b0d75a3da101a73ccc83711a00..44e0d6e2c76b1ed14c4b1ee1dd2ea9d6981c8601 100644 (file)
@@ -587,6 +587,7 @@ static struct m9206_inits tvwalkertwin_rc_init [] = {
 static struct dvb_usb_device_properties megasky_properties;
 static struct dvb_usb_device_properties digivox_mini_ii_properties;
 static struct dvb_usb_device_properties tvwalkertwin_properties;
+static struct dvb_usb_device_properties dposh_properties;
 static struct m9206_inits megasky_rc_init [];
 static struct m9206_inits tvwalkertwin_rc_init [];
 
@@ -625,6 +626,11 @@ static int m920x_probe(struct usb_interface *intf,
                        goto found;
                }
 
+               if ((ret = dvb_usb_device_init(intf, &dposh_properties, THIS_MODULE, &d)) == 0) {
+                       /* Remote controller not supported yet. */
+                       goto found;
+               }
+
                return ret;
        } else {
                /* Another interface on a multi-tuner device */
@@ -663,6 +669,8 @@ static struct usb_device_id m920x_table [] = {
                             USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) },
                { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
                             USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
+               { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
+               { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
                { }             /* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, m920x_table);
@@ -835,6 +843,47 @@ static struct dvb_usb_device_properties tvwalkertwin_properties = {
        }
 };
 
+static struct dvb_usb_device_properties dposh_properties = {
+       .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+       .usb_ctrl = DEVICE_SPECIFIC,
+       .firmware = "dvb-usb-dposh-01.fw",
+       .download_firmware = m9206_firmware_download,
+
+       /* Remote controller not supported yet. */
+
+       .size_of_priv     = sizeof(struct m9206_state),
+
+       .identify_state   = m920x_identify_state,
+       .num_adapters = 1,
+       .adapter = {{
+                        /* Nardware pid filters don't work with this device/firmware. */
+
+                        .frontend_attach  = megasky_mt352_frontend_attach,
+                        .tuner_attach     = megasky_qt1010_tuner_attach,
+
+                        .stream = {
+                                .type = USB_BULK,
+                                .count = 8,
+                                .endpoint = 0x81,
+                                .u = {
+                                         .bulk = {
+                                                 .buffersize = 512,
+                                         }
+                                 }
+                        },
+                }},
+       .i2c_algo         = &m9206_i2c_algo,
+
+       .num_device_descs = 1,
+       .devices = {
+                {   .name = "Dposh DVB-T USB2.0",
+                    .cold_ids = { &m920x_table[4], NULL },
+                    .warm_ids = { &m920x_table[5], NULL },
+                },
+        }
+};
+
 static struct usb_driver m920x_driver = {
        .name           = "dvb_usb_m920x",
        .probe          = m920x_probe,