[PATCH] ppc32: remove obsolete macserial driver
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Mon, 27 Jun 2005 21:36:33 +0000 (14:36 -0700)
committerLinus Torvalds <torvalds@ppc970.osdl.org>
Mon, 27 Jun 2005 22:11:43 +0000 (15:11 -0700)
The macserial driver has been obsoleted by the new pmac_zilog driver for a
while now and probably doesn't even work anymore on recent kernels.  This
patch removes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/macintosh/Kconfig
drivers/macintosh/Makefile
drivers/macintosh/macserial.c [deleted file]
drivers/macintosh/macserial.h [deleted file]

index 8a7117a08cf09a44b712eff882ab175150ecd537..b0ace5bc950ce2c3441ddac24027f0bac45a20dc 100644 (file)
@@ -126,13 +126,6 @@ config PMAC_BACKLIGHT
          events; also, the PowerBook button device will be enabled so you can
          change the screen brightness.
 
-config MAC_SERIAL
-       tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)"
-       depends on PPC_PMAC && BROKEN
-       help
-         This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
-         "Character devices --> Serial drivers --> PowerMac z85c30" option.
-
 config ADB_MACIO
        bool "Include MacIO (CHRP) ADB driver"
        depends on ADB && PPC_CHRP && !PPC_PMAC64
index c3a4705a82953a7391c0010698c45487938023fc..b3f88a4fcef77eaa912f31898eb9f903a4f89034 100644 (file)
@@ -7,7 +7,6 @@
 obj-$(CONFIG_PPC_PMAC)         += macio_asic.o
 
 obj-$(CONFIG_PMAC_PBOOK)       += mediabay.o
-obj-$(CONFIG_MAC_SERIAL)       += macserial.o
 obj-$(CONFIG_MAC_EMUMOUSEBTN)  += mac_hid.o
 obj-$(CONFIG_INPUT_ADBHID)     += adbhid.o
 obj-$(CONFIG_ANSLCD)           += ans-lcd.o
diff --git a/drivers/macintosh/macserial.c b/drivers/macintosh/macserial.c
deleted file mode 100644 (file)
index 0be3ac6..0000000
+++ /dev/null
@@ -1,3036 +0,0 @@
-/*
- * macserial.c: Serial port driver for Power Macintoshes.
- *
- * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras.
- *
- * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * Receive DMA code by Takashi Oe <toe@unlserve.unl.edu>.
- *
- * $Id: macserial.c,v 1.24.2.4 1999/10/19 04:36:42 paulus Exp $
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#ifdef CONFIG_SERIAL_CONSOLE
-#include <linux/console.h>
-#endif
-#include <linux/slab.h>
-#include <linux/bitops.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
-#include <asm/system.h>
-#include <asm/segment.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#ifdef CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-#include <asm/dbdma.h>
-
-#include "macserial.h"
-
-#ifdef CONFIG_PMAC_PBOOK
-static int serial_notify_sleep(struct pmu_sleep_notifier *self, int when);
-static struct pmu_sleep_notifier serial_sleep_notifier = {
-       serial_notify_sleep,
-       SLEEP_LEVEL_MISC,
-};
-#endif
-
-#define SUPPORT_SERIAL_DMA
-#define MACSERIAL_VERSION      "2.0"
-
-/*
- * It would be nice to dynamically allocate everything that
- * depends on NUM_SERIAL, so we could support any number of
- * Z8530s, but for now...
- */
-#define NUM_SERIAL     2               /* Max number of ZS chips supported */
-#define NUM_CHANNELS   (NUM_SERIAL * 2)        /* 2 channels per chip */
-
-/* On PowerMacs, the hardware takes care of the SCC recovery time,
-   but we need the eieio to make sure that the accesses occur
-   in the order we want. */
-#define RECOVERY_DELAY eieio()
-
-static struct tty_driver *serial_driver;
-
-struct mac_zschannel zs_channels[NUM_CHANNELS];
-
-struct mac_serial zs_soft[NUM_CHANNELS];
-int zs_channels_found;
-struct mac_serial *zs_chain;   /* list of all channels */
-
-struct tty_struct zs_ttys[NUM_CHANNELS];
-
-static int is_powerbook;
-
-#ifdef CONFIG_SERIAL_CONSOLE
-static struct console sercons;
-#endif
-
-#ifdef CONFIG_KGDB
-struct mac_zschannel *zs_kgdbchan;
-static unsigned char scc_inittab[] = {
-       9,  0x80,       /* reset A side (CHRA) */
-       13, 0,          /* set baud rate divisor */
-       12, 1,
-       14, 1,          /* baud rate gen enable, src=rtxc (BRENABL) */
-       11, 0x50,       /* clocks = br gen (RCBR | TCBR) */
-       5,  0x6a,       /* tx 8 bits, assert RTS (Tx8 | TxENAB | RTS) */
-       4,  0x44,       /* x16 clock, 1 stop (SB1 | X16CLK)*/
-       3,  0xc1,       /* rx enable, 8 bits (RxENABLE | Rx8)*/
-};
-#endif
-#define ZS_CLOCK         3686400       /* Z8530 RTxC input clock rate */
-
-/* serial subtype definitions */
-#define SERIAL_TYPE_NORMAL     1
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/*
- * Debugging.
- */
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-#undef SERIAL_DEBUG_POWER
-#undef SERIAL_DEBUG_THROTTLE
-#undef SERIAL_DEBUG_STOP
-#undef SERIAL_DEBUG_BAUDS
-
-#define RS_STROBE_TIME 10
-#define RS_ISR_PASS_LIMIT 256
-
-#define _INLINE_ inline
-
-#ifdef SERIAL_DEBUG_OPEN
-#define OPNDBG(fmt, arg...)    printk(KERN_DEBUG fmt , ## arg)
-#else
-#define OPNDBG(fmt, arg...)    do { } while (0)
-#endif
-#ifdef SERIAL_DEBUG_POWER
-#define PWRDBG(fmt, arg...)    printk(KERN_DEBUG fmt , ## arg)
-#else
-#define PWRDBG(fmt, arg...)    do { } while (0)
-#endif
-#ifdef SERIAL_DEBUG_BAUDS
-#define BAUDBG(fmt, arg...)    printk(fmt , ## arg)
-#else
-#define BAUDBG(fmt, arg...)    do { } while (0)
-#endif
-
-static void probe_sccs(void);
-static void change_speed(struct mac_serial *info, struct termios *old);
-static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-static int set_scc_power(struct mac_serial * info, int state);
-static int setup_scc(struct mac_serial * info);
-static void dbdma_reset(volatile struct dbdma_regs *dma);
-static void dbdma_flush(volatile struct dbdma_regs *dma);
-static irqreturn_t rs_txdma_irq(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t rs_rxdma_irq(int irq, void *dev_id, struct pt_regs *regs);
-static void dma_init(struct mac_serial * info);
-static void rxdma_start(struct mac_serial * info, int curr);
-static void rxdma_to_tty(struct mac_serial * info);
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write.  We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *tmp_buf;
-static DECLARE_MUTEX(tmp_buf_sem);
-
-
-static inline int __pmac
-serial_paranoia_check(struct mac_serial *info,
-                     char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-       static const char badmagic[] = KERN_WARNING
-               "Warning: bad magic number for serial struct %s in %s\n";
-       static const char badinfo[] = KERN_WARNING
-               "Warning: null mac_serial for %s in %s\n";
-
-       if (!info) {
-               printk(badinfo, name, routine);
-               return 1;
-       }
-       if (info->magic != SERIAL_MAGIC) {
-               printk(badmagic, name, routine);
-               return 1;
-       }
-#endif
-       return 0;
-}
-
-/* 
- * Reading and writing Z8530 registers.
- */
-static inline unsigned char __pmac read_zsreg(struct mac_zschannel *channel,
-                                             unsigned char reg)
-{
-       unsigned char retval;
-       unsigned long flags;
-
-       /*
-        * We have to make this atomic.
-        */
-       spin_lock_irqsave(&channel->lock, flags);
-       if (reg != 0) {
-               *channel->control = reg;
-               RECOVERY_DELAY;
-       }
-       retval = *channel->control;
-       RECOVERY_DELAY;
-       spin_unlock_irqrestore(&channel->lock, flags);
-       return retval;
-}
-
-static inline void __pmac write_zsreg(struct mac_zschannel *channel,
-                                     unsigned char reg, unsigned char value)
-{
-       unsigned long flags;
-
-       spin_lock_irqsave(&channel->lock, flags);
-       if (reg != 0) {
-               *channel->control = reg;
-               RECOVERY_DELAY;
-       }
-       *channel->control = value;
-       RECOVERY_DELAY;
-       spin_unlock_irqrestore(&channel->lock, flags);
-       return;
-}
-
-static inline unsigned char __pmac read_zsdata(struct mac_zschannel *channel)
-{
-       unsigned char retval;
-
-       retval = *channel->data;
-       RECOVERY_DELAY;
-       return retval;
-}
-
-static inline void write_zsdata(struct mac_zschannel *channel,
-                               unsigned char value)
-{
-       *channel->data = value;
-       RECOVERY_DELAY;
-       return;
-}
-
-static inline void load_zsregs(struct mac_zschannel *channel,
-                              unsigned char *regs)
-{
-       ZS_CLEARERR(channel);
-       ZS_CLEARFIFO(channel);
-       /* Load 'em up */
-       write_zsreg(channel, R4, regs[R4]);
-       write_zsreg(channel, R10, regs[R10]);
-       write_zsreg(channel, R3, regs[R3] & ~RxENABLE);
-       write_zsreg(channel, R5, regs[R5] & ~TxENAB);
-       write_zsreg(channel, R1, regs[R1]);
-       write_zsreg(channel, R9, regs[R9]);
-       write_zsreg(channel, R11, regs[R11]);
-       write_zsreg(channel, R12, regs[R12]);
-       write_zsreg(channel, R13, regs[R13]);
-       write_zsreg(channel, R14, regs[R14]);
-       write_zsreg(channel, R15, regs[R15]);
-       write_zsreg(channel, R3, regs[R3]);
-       write_zsreg(channel, R5, regs[R5]);
-       return;
-}
-
-/* Sets or clears DTR/RTS on the requested line */
-static inline void zs_rtsdtr(struct mac_serial *ss, int set)
-{
-       if (set)
-               ss->curregs[5] |= (RTS | DTR);
-       else
-               ss->curregs[5] &= ~(RTS | DTR);
-       write_zsreg(ss->zs_channel, 5, ss->curregs[5]);
-       return;
-}
-
-/* Utility routines for the Zilog */
-static inline int get_zsbaud(struct mac_serial *ss)
-{
-       struct mac_zschannel *channel = ss->zs_channel;
-       int brg;
-
-       if ((ss->curregs[R11] & TCBR) == 0) {
-               /* higher rates don't use the baud rate generator */
-               return (ss->curregs[R4] & X32CLK)? ZS_CLOCK/32: ZS_CLOCK/16;
-       }
-       /* The baud rate is split up between two 8-bit registers in
-        * what is termed 'BRG time constant' format in my docs for
-        * the chip, it is a function of the clk rate the chip is
-        * receiving which happens to be constant.
-        */
-       brg = (read_zsreg(channel, 13) << 8);
-       brg |= read_zsreg(channel, 12);
-       return BRG_TO_BPS(brg, (ZS_CLOCK/(ss->clk_divisor)));
-}
-
-/* On receive, this clears errors and the receiver interrupts */
-static inline void rs_recv_clear(struct mac_zschannel *zsc)
-{
-       write_zsreg(zsc, 0, ERR_RES);
-       write_zsreg(zsc, 0, RES_H_IUS); /* XXX this is unnecessary */
-}
-
-/*
- * Reset a Descriptor-Based DMA channel.
- */
-static void dbdma_reset(volatile struct dbdma_regs *dma)
-{
-       int i;
-
-       out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16);
-
-       /*
-        * Yes this looks peculiar, but apparently it needs to be this
-        * way on some machines.  (We need to make sure the DBDMA
-        * engine has actually got the write above and responded
-        * to it. - paulus)
-        */
-       for (i = 200; i > 0; --i)
-               if (ld_le32(&dma->status) & RUN)
-                       udelay(1);
-}
-
-/*
- * Tells a DBDMA channel to stop and write any buffered data
- * it might have to memory.
- */
-static _INLINE_ void dbdma_flush(volatile struct dbdma_regs *dma)
-{
-       int i = 0;
-
-       out_le32(&dma->control, (FLUSH << 16) | FLUSH);
-       while (((in_le32(&dma->status) & FLUSH) != 0) && (i++ < 100))
-               udelay(1);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines.  All of the following
- * subroutines are declared as inline and are folded into
- * rs_interrupt().  They were separated out for readability's sake.
- *
- *                             - Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
- */
-static _INLINE_ void rs_sched_event(struct mac_serial *info,
-                                 int event)
-{
-       info->event |= 1 << event;
-       schedule_work(&info->tqueue);
-}
-
-/* Work out the flag value for a z8530 status value. */
-static _INLINE_ int stat_to_flag(int stat)
-{
-       int flag;
-
-       if (stat & Rx_OVR) {
-               flag = TTY_OVERRUN;
-       } else if (stat & FRM_ERR) {
-               flag = TTY_FRAME;
-       } else if (stat & PAR_ERR) {
-               flag = TTY_PARITY;
-       } else
-               flag = 0;
-       return flag;
-}
-
-static _INLINE_ void receive_chars(struct mac_serial *info,
-                                  struct pt_regs *regs)
-{
-       struct tty_struct *tty = info->tty;
-       unsigned char ch, stat, flag;
-
-       while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) != 0) {
-
-               stat = read_zsreg(info->zs_channel, R1);
-               ch = read_zsdata(info->zs_channel);
-
-#ifdef CONFIG_KGDB
-               if (info->kgdb_channel) {
-                       if (ch == 0x03 || ch == '$')
-                               breakpoint();
-                       if (stat & (Rx_OVR|FRM_ERR|PAR_ERR))
-                               write_zsreg(info->zs_channel, 0, ERR_RES);
-                       return;
-               }
-#endif
-               if (!tty)
-                       continue;
-               if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-                       tty_flip_buffer_push(tty);
-
-               if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-                       static int flip_buf_ovf;
-                       if (++flip_buf_ovf <= 1)
-                               printk(KERN_WARNING "FB. overflow: %d\n",
-                                                   flip_buf_ovf);
-                       break;
-               }
-               tty->flip.count++;
-               {
-                       static int flip_max_cnt;
-                       if (flip_max_cnt < tty->flip.count)
-                               flip_max_cnt = tty->flip.count;
-               }
-               flag = stat_to_flag(stat);
-               if (flag)
-                       /* reset the error indication */
-                       write_zsreg(info->zs_channel, 0, ERR_RES);
-               *tty->flip.flag_buf_ptr++ = flag;
-               *tty->flip.char_buf_ptr++ = ch;
-       }
-       if (tty)
-               tty_flip_buffer_push(tty);
-}
-
-static void transmit_chars(struct mac_serial *info)
-{
-       if ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0)
-               return;
-       info->tx_active = 0;
-
-       if (info->x_char && !info->power_wait) {
-               /* Send next char */
-               write_zsdata(info->zs_channel, info->x_char);
-               info->x_char = 0;
-               info->tx_active = 1;
-               return;
-       }
-
-       if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tx_stopped
-           || info->power_wait) {
-               write_zsreg(info->zs_channel, 0, RES_Tx_P);
-               return;
-       }
-
-       /* Send char */
-       write_zsdata(info->zs_channel, info->xmit_buf[info->xmit_tail++]);
-       info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-       info->xmit_cnt--;
-       info->tx_active = 1;
-
-       if (info->xmit_cnt < WAKEUP_CHARS)
-               rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-}
-
-static void powerup_done(unsigned long data)
-{
-       struct mac_serial *info = (struct mac_serial *) data;
-       unsigned long flags;
-
-       spin_lock_irqsave(&info->lock, flags);
-       info->power_wait = 0;
-       transmit_chars(info);
-       spin_unlock_irqrestore(&info->lock, flags);
-}
-
-static _INLINE_ void status_handle(struct mac_serial *info)
-{
-       unsigned char status;
-
-       /* Get status from Read Register 0 */
-       status = read_zsreg(info->zs_channel, 0);
-
-       /* Check for DCD transitions */
-       if (((status ^ info->read_reg_zero) & DCD) != 0
-           && info->tty && !C_CLOCAL(info->tty)) {
-               if (status & DCD) {
-                       wake_up_interruptible(&info->open_wait);
-               } else {
-                       if (info->tty)
-                               tty_hangup(info->tty);
-               }
-       }
-
-       /* Check for CTS transitions */
-       if (info->tty && C_CRTSCTS(info->tty)) {
-               /*
-                * For some reason, on the Power Macintosh,
-                * it seems that the CTS bit is 1 when CTS is
-                * *negated* and 0 when it is asserted.
-                * The DCD bit doesn't seem to be inverted
-                * like this.
-                */
-               if ((status & CTS) == 0) {
-                       if (info->tx_stopped) {
-#ifdef SERIAL_DEBUG_FLOW
-                               printk(KERN_DEBUG "CTS up\n");
-#endif
-                               info->tx_stopped = 0;
-                               if (!info->tx_active)
-                                       transmit_chars(info);
-                       }
-               } else {
-#ifdef SERIAL_DEBUG_FLOW
-                       printk(KERN_DEBUG "CTS down\n");
-#endif
-                       info->tx_stopped = 1;
-               }
-       }
-
-       /* Clear status condition... */
-       write_zsreg(info->zs_channel, 0, RES_EXT_INT);
-       info->read_reg_zero = status;
-}
-
-static _INLINE_ void receive_special_dma(struct mac_serial *info)
-{
-       unsigned char stat, flag;
-       volatile struct dbdma_regs *rd = &info->rx->dma;
-       int where = RX_BUF_SIZE;
-
-       spin_lock(&info->rx_dma_lock);
-       if ((ld_le32(&rd->status) & ACTIVE) != 0)
-               dbdma_flush(rd);
-       if (in_le32(&rd->cmdptr)
-           == virt_to_bus(info->rx_cmds[info->rx_cbuf] + 1))
-               where -= in_le16(&info->rx->res_count);
-       where--;
-
-       stat = read_zsreg(info->zs_channel, R1);
-
-       flag = stat_to_flag(stat);
-       if (flag) {
-               info->rx_flag_buf[info->rx_cbuf][where] = flag;
-               /* reset the error indication */
-               write_zsreg(info->zs_channel, 0, ERR_RES);
-       }
-
-       spin_unlock(&info->rx_dma_lock);
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-{
-       struct mac_serial *info = (struct mac_serial *) dev_id;
-       unsigned char zs_intreg;
-       int shift;
-       unsigned long flags;
-       int handled = 0;
-
-       if (!(info->flags & ZILOG_INITIALIZED)) {
-               printk(KERN_WARNING "rs_interrupt: irq %d, port not "
-                                   "initialized\n", irq);
-               disable_irq(irq);
-               return IRQ_NONE;
-       }
-
-       /* NOTE: The read register 3, which holds the irq status,
-        *       does so for both channels on each chip.  Although
-        *       the status value itself must be read from the A
-        *       channel and is only valid when read from channel A.
-        *       Yes... broken hardware...
-        */
-#define CHAN_IRQMASK (CHBRxIP | CHBTxIP | CHBEXT)
-
-       if (info->zs_chan_a == info->zs_channel)
-               shift = 3;      /* Channel A */
-       else
-               shift = 0;      /* Channel B */
-
-       spin_lock_irqsave(&info->lock, flags);
-       for (;;) {
-               zs_intreg = read_zsreg(info->zs_chan_a, 3) >> shift;
-#ifdef SERIAL_DEBUG_INTR
-               printk(KERN_DEBUG "rs_interrupt: irq %d, zs_intreg 0x%x\n",
-                      irq, (int)zs_intreg);
-#endif
-
-               if ((zs_intreg & CHAN_IRQMASK) == 0)
-                       break;
-               handled = 1;
-
-               if (zs_intreg & CHBRxIP) {
-                       /* If we are doing DMA, we only ask for interrupts
-                          on characters with errors or special conditions. */
-                       if (info->dma_initted)
-                               receive_special_dma(info);
-                       else
-                               receive_chars(info, regs);
-               }
-               if (zs_intreg & CHBTxIP)
-                       transmit_chars(info);
-               if (zs_intreg & CHBEXT)
-                       status_handle(info);
-       }
-       spin_unlock_irqrestore(&info->lock, flags);
-       return IRQ_RETVAL(handled);
-}
-
-/* Transmit DMA interrupt - not used at present */
-static irqreturn_t rs_txdma_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
-       return IRQ_HANDLED;
-}
-
-/*
- * Receive DMA interrupt.
- */
-static irqreturn_t rs_rxdma_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
-       struct mac_serial *info = (struct mac_serial *) dev_id;
-       volatile struct dbdma_cmd *cd;
-
-       if (!info->dma_initted)
-               return IRQ_NONE;
-       spin_lock(&info->rx_dma_lock);
-       /* First, confirm that this interrupt is, indeed, coming */
-       /* from Rx DMA */
-       cd = info->rx_cmds[info->rx_cbuf] + 2;
-       if ((in_le16(&cd->xfer_status) & (RUN | ACTIVE)) != (RUN | ACTIVE)) {
-               spin_unlock(&info->rx_dma_lock);
-               return IRQ_NONE;
-       }
-       if (info->rx_fbuf != RX_NO_FBUF) {
-               info->rx_cbuf = info->rx_fbuf;
-               if (++info->rx_fbuf == info->rx_nbuf)
-                       info->rx_fbuf = 0;
-               if (info->rx_fbuf == info->rx_ubuf)
-                       info->rx_fbuf = RX_NO_FBUF;
-       }
-       spin_unlock(&info->rx_dma_lock);
-       return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * ------------------------------------------------------------
- */
-static void rs_stop(struct tty_struct *tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-
-#ifdef SERIAL_DEBUG_STOP
-       printk(KERN_DEBUG "rs_stop %ld....\n",
-              tty->ldisc.chars_in_buffer(tty));
-#endif
-
-       if (serial_paranoia_check(info, tty->name, "rs_stop"))
-               return;
-
-#if 0
-       spin_lock_irqsave(&info->lock, flags);
-       if (info->curregs[5] & TxENAB) {
-               info->curregs[5] &= ~TxENAB;
-               info->pendregs[5] &= ~TxENAB;
-               write_zsreg(info->zs_channel, 5, info->curregs[5]);
-       }
-       spin_unlock_irqrestore(&info->lock, flags);
-#endif
-}
-
-static void rs_start(struct tty_struct *tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       unsigned long flags;
-
-#ifdef SERIAL_DEBUG_STOP
-       printk(KERN_DEBUG "rs_start %ld....\n", 
-              tty->ldisc.chars_in_buffer(tty));
-#endif
-
-       if (serial_paranoia_check(info, tty->name, "rs_start"))
-               return;
-
-       spin_lock_irqsave(&info->lock, flags);
-#if 0
-       if (info->xmit_cnt && info->xmit_buf && !(info->curregs[5] & TxENAB)) {
-               info->curregs[5] |= TxENAB;
-               info->pendregs[5] = info->curregs[5];
-               write_zsreg(info->zs_channel, 5, info->curregs[5]);
-       }
-#else
-       if (info->xmit_cnt && info->xmit_buf && !info->tx_active) {
-               transmit_chars(info);
-       }
-#endif
-       spin_unlock_irqrestore(&info->lock, flags);
-}
-
-static void do_softint(void *private_)
-{
-       struct mac_serial       *info = (struct mac_serial *) private_;
-       struct tty_struct       *tty;
-
-       tty = info->tty;
-       if (!tty)
-               return;
-
-       if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-               tty_wakeup(tty);
-}
-
-static int startup(struct mac_serial * info)
-{
-       int delay;
-
-       OPNDBG("startup() (ttyS%d, irq %d)\n", info->line, info->irq);
-       if (info->flags & ZILOG_INITIALIZED) {
-               OPNDBG(" -> already inited\n");
-               return 0;
-       }
-
-       if (!info->xmit_buf) {
-               info->xmit_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL);
-               if (!info->xmit_buf)
-                       return -ENOMEM;
-       }
-
-       OPNDBG("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
-
-       delay = set_scc_power(info, 1);
-
-       setup_scc(info);
-
-       if (delay) {
-               unsigned long flags;
-
-               /* delay is in ms */
-               spin_lock_irqsave(&info->lock, flags);
-               info->power_wait = 1;
-               mod_timer(&info->powerup_timer,
-                         jiffies + (delay * HZ + 999) / 1000);
-               spin_unlock_irqrestore(&info->lock, flags);
-       }
-
-       OPNDBG("enabling IRQ on ttyS%d (irq %d)...\n", info->line, info->irq);
-
-       info->flags |= ZILOG_INITIALIZED;
-       enable_irq(info->irq);
-       if (info->dma_initted) {
-               enable_irq(info->rx_dma_irq);
-       }
-
-       return 0;
-}
-
-static _INLINE_ void rxdma_start(struct mac_serial * info, int curr)
-{
-       volatile struct dbdma_regs *rd = &info->rx->dma;
-       volatile struct dbdma_cmd *cd = info->rx_cmds[curr];
-
-//printk(KERN_DEBUG "SCC: rxdma_start\n");
-
-       st_le32(&rd->cmdptr, virt_to_bus(cd));
-       out_le32(&rd->control, (RUN << 16) | RUN);
-}
-
-static void rxdma_to_tty(struct mac_serial *info)
-{
-       struct tty_struct       *tty = info->tty;
-       volatile struct dbdma_regs *rd = &info->rx->dma;
-       unsigned long flags;
-       int residue, available, space, do_queue;
-
-       if (!tty)
-               return;
-
-       do_queue = 0;
-       spin_lock_irqsave(&info->rx_dma_lock, flags);
-more:
-       space = TTY_FLIPBUF_SIZE - tty->flip.count;
-       if (!space) {
-               do_queue++;
-               goto out;
-       }
-       residue = 0;
-       if (info->rx_ubuf == info->rx_cbuf) {
-               if ((ld_le32(&rd->status) & ACTIVE) != 0) {
-                       dbdma_flush(rd);
-                       if (in_le32(&rd->cmdptr)
-                           == virt_to_bus(info->rx_cmds[info->rx_cbuf]+1))
-                               residue = in_le16(&info->rx->res_count);
-               }
-       }
-       available = RX_BUF_SIZE - residue - info->rx_done_bytes;
-       if (available > space)
-               available = space;
-       if (available) {
-               memcpy(tty->flip.char_buf_ptr,
-                      info->rx_char_buf[info->rx_ubuf] + info->rx_done_bytes,
-                      available);
-               memcpy(tty->flip.flag_buf_ptr,
-                      info->rx_flag_buf[info->rx_ubuf] + info->rx_done_bytes,
-                      available);
-               tty->flip.char_buf_ptr += available;
-               tty->flip.count += available;
-               tty->flip.flag_buf_ptr += available;
-               memset(info->rx_flag_buf[info->rx_ubuf] + info->rx_done_bytes,
-                      0, available);
-               info->rx_done_bytes += available;
-               do_queue++;
-       }
-       if (info->rx_done_bytes == RX_BUF_SIZE) {
-               volatile struct dbdma_cmd *cd = info->rx_cmds[info->rx_ubuf];
-
-               if (info->rx_ubuf == info->rx_cbuf)
-                       goto out;
-               /* mark rx_char_buf[rx_ubuf] free */
-               st_le16(&cd->command, DBDMA_NOP);
-               cd++;
-               st_le32(&cd->cmd_dep, 0);
-               st_le32((unsigned int *)&cd->res_count, 0);
-               cd++;
-               st_le16(&cd->xfer_status, 0);
-
-               if (info->rx_fbuf == RX_NO_FBUF) {
-                       info->rx_fbuf = info->rx_ubuf;
-                       if (!(ld_le32(&rd->status) & ACTIVE)) {
-                               dbdma_reset(&info->rx->dma);
-                               rxdma_start(info, info->rx_ubuf);
-                               info->rx_cbuf = info->rx_ubuf;
-                       }
-               }
-               info->rx_done_bytes = 0;
-               if (++info->rx_ubuf == info->rx_nbuf)
-                       info->rx_ubuf = 0;
-               if (info->rx_fbuf == info->rx_ubuf)
-                       info->rx_fbuf = RX_NO_FBUF;
-               goto more;
-       }
-out:
-       spin_unlock_irqrestore(&info->rx_dma_lock, flags);
-       if (do_queue)
-               tty_flip_buffer_push(tty);
-}
-
-static void poll_rxdma(unsigned long private_)
-{
-       struct mac_serial       *info = (struct mac_serial *) private_;
-       unsigned long flags;
-
-       rxdma_to_tty(info);
-       spin_lock_irqsave(&info->rx_dma_lock, flags);
-       mod_timer(&info->poll_dma_timer, RX_DMA_TIMER);
-       spin_unlock_irqrestore(&info->rx_dma_lock, flags);
-}
-
-static void dma_init(struct mac_serial * info)
-{
-       int i, size;
-       volatile struct dbdma_cmd *cd;
-       unsigned char *p;
-
-       info->rx_nbuf = 8;
-
-       /* various mem set up */
-       size = sizeof(struct dbdma_cmd) * (3 * info->rx_nbuf + 2)
-               + (RX_BUF_SIZE * 2 + sizeof(*info->rx_cmds)
-                  + sizeof(*info->rx_char_buf) + sizeof(*info->rx_flag_buf))
-               * info->rx_nbuf;
-       info->dma_priv = kmalloc(size, GFP_KERNEL | GFP_DMA);
-       if (info->dma_priv == NULL)
-               return;
-       memset(info->dma_priv, 0, size);
-
-       info->rx_cmds = (volatile struct dbdma_cmd **)info->dma_priv;
-       info->rx_char_buf = (unsigned char **) (info->rx_cmds + info->rx_nbuf);
-       info->rx_flag_buf = info->rx_char_buf + info->rx_nbuf;
-       p = (unsigned char *) (info->rx_flag_buf + info->rx_nbuf);
-       for (i = 0; i < info->rx_nbuf; i++, p += RX_BUF_SIZE)
-               info->rx_char_buf[i] = p;
-       for (i = 0; i < info->rx_nbuf; i++, p += RX_BUF_SIZE)
-               info->rx_flag_buf[i] = p;
-
-       /* a bit of DMA programming */
-       cd = info->rx_cmds[0] = (volatile struct dbdma_cmd *) DBDMA_ALIGN(p);
-       st_le16(&cd->command, DBDMA_NOP);
-       cd++;
-       st_le16(&cd->req_count, RX_BUF_SIZE);
-       st_le16(&cd->command, INPUT_MORE);
-       st_le32(&cd->phy_addr, virt_to_bus(info->rx_char_buf[0]));
-       cd++;
-       st_le16(&cd->req_count, 4);
-       st_le16(&cd->command, STORE_WORD | INTR_ALWAYS);
-       st_le32(&cd->phy_addr, virt_to_bus(cd-2));
-       st_le32(&cd->cmd_dep, DBDMA_STOP);
-       for (i = 1; i < info->rx_nbuf; i++) {
-               info->rx_cmds[i] = ++cd;
-               st_le16(&cd->command, DBDMA_NOP);
-               cd++;
-               st_le16(&cd->req_count, RX_BUF_SIZE);
-               st_le16(&cd->command, INPUT_MORE);
-               st_le32(&cd->phy_addr, virt_to_bus(info->rx_char_buf[i]));
-               cd++;
-               st_le16(&cd->req_count, 4);
-               st_le16(&cd->command, STORE_WORD | INTR_ALWAYS);
-               st_le32(&cd->phy_addr, virt_to_bus(cd-2));
-               st_le32(&cd->cmd_dep, DBDMA_STOP);
-       }
-       cd++;
-       st_le16(&cd->command, DBDMA_NOP | BR_ALWAYS);
-       st_le32(&cd->cmd_dep, virt_to_bus(info->rx_cmds[0]));
-
-       /* setup DMA to our liking */
-       dbdma_reset(&info->rx->dma);
-       st_le32(&info->rx->dma.intr_sel, 0x10001);
-       st_le32(&info->rx->dma.br_sel, 0x10001);
-       out_le32(&info->rx->dma.wait_sel, 0x10001);
-
-       /* set various flags */
-       info->rx_ubuf = 0;
-       info->rx_cbuf = 0;
-       info->rx_fbuf = info->rx_ubuf + 1;
-       if (info->rx_fbuf == info->rx_nbuf)
-               info->rx_fbuf = RX_NO_FBUF;
-       info->rx_done_bytes = 0;
-
-       /* setup polling */
-       init_timer(&info->poll_dma_timer);
-       info->poll_dma_timer.function = (void *)&poll_rxdma;
-       info->poll_dma_timer.data = (unsigned long)info;
-
-       info->dma_initted = 1;
-}
-
-/*
- * FixZeroBug....Works around a bug in the SCC receving channel.
- * Taken from Darwin code, 15 Sept. 2000  -DanM
- *
- * The following sequence prevents a problem that is seen with O'Hare ASICs
- * (most versions -- also with some Heathrow and Hydra ASICs) where a zero
- * at the input to the receiver becomes 'stuck' and locks up the receiver.
- * This problem can occur as a result of a zero bit at the receiver input
- * coincident with any of the following events:
- *
- *     The SCC is initialized (hardware or software).
- *     A framing error is detected.
- *     The clocking option changes from synchronous or X1 asynchronous
- *             clocking to X16, X32, or X64 asynchronous clocking.
- *     The decoding mode is changed among NRZ, NRZI, FM0, or FM1.
- *
- * This workaround attempts to recover from the lockup condition by placing
- * the SCC in synchronous loopback mode with a fast clock before programming
- * any of the asynchronous modes.
- */
-static void fix_zero_bug_scc(struct mac_serial * info)
-{
-       write_zsreg(info->zs_channel, 9,
-                   (info->zs_channel == info->zs_chan_a? CHRA: CHRB));
-       udelay(10);
-       write_zsreg(info->zs_channel, 9,
-                   ((info->zs_channel == info->zs_chan_a? CHRA: CHRB) | NV));
-
-       write_zsreg(info->zs_channel, 4, (X1CLK | EXTSYNC));
-
-       /* I think this is wrong....but, I just copying code....
-       */
-       write_zsreg(info->zs_channel, 3, (8 & ~RxENABLE));
-
-       write_zsreg(info->zs_channel, 5, (8 & ~TxENAB));
-       write_zsreg(info->zs_channel, 9, NV);   /* Didn't we already do this? */
-       write_zsreg(info->zs_channel, 11, (RCBR | TCBR));
-       write_zsreg(info->zs_channel, 12, 0);
-       write_zsreg(info->zs_channel, 13, 0);
-       write_zsreg(info->zs_channel, 14, (LOOPBAK | SSBR));
-       write_zsreg(info->zs_channel, 14, (LOOPBAK | SSBR | BRENABL));
-       write_zsreg(info->zs_channel, 3, (8 | RxENABLE));
-       write_zsreg(info->zs_channel, 0, RES_EXT_INT);
-       write_zsreg(info->zs_channel, 0, RES_EXT_INT);  /* to kill some time */
-
-       /* The channel should be OK now, but it is probably receiving
-        * loopback garbage.
-        * Switch to asynchronous mode, disable the receiver,
-        * and discard everything in the receive buffer.
-        */
-       write_zsreg(info->zs_channel, 9, NV);
-       write_zsreg(info->zs_channel, 4, PAR_ENA);
-       write_zsreg(info->zs_channel, 3, (8 & ~RxENABLE));
-
-       while (read_zsreg(info->zs_channel, 0) & Rx_CH_AV) {
-               (void)read_zsreg(info->zs_channel, 8);
-               write_zsreg(info->zs_channel, 0, RES_EXT_INT);
-               write_zsreg(info->zs_channel, 0, ERR_RES);
-       }
-}
-
-static int setup_scc(struct mac_serial * info)
-{
-       unsigned long flags;
-
-       OPNDBG("setting up ttyS%d SCC...\n", info->line);
-
-       spin_lock_irqsave(&info->lock, flags);
-
-       /* Nice buggy HW ... */
-       fix_zero_bug_scc(info);
-
-       /*
-        * Reset the chip.
-        */
-       write_zsreg(info->zs_channel, 9,
-                   (info->zs_channel == info->zs_chan_a? CHRA: CHRB));
-       udelay(10);
-       write_zsreg(info->zs_channel, 9, 0);
-
-       /*
-        * Clear the receive FIFO.
-        */
-       ZS_CLEARFIFO(info->zs_channel);
-       info->xmit_fifo_size = 1;
-
-       /*
-        * Reset DMAs
-        */
-       if (info->has_dma)
-               dma_init(info);
-
-       /*
-        * Clear the interrupt registers.
-        */
-       write_zsreg(info->zs_channel, 0, ERR_RES);
-       write_zsreg(info->zs_channel, 0, RES_H_IUS);
-
-       /*
-        * Turn on RTS and DTR.
-        */
-       if (!info->is_irda)
-               zs_rtsdtr(info, 1);
-
-       /*
-        * Finally, enable sequencing and interrupts
-        */
-       if (!info->dma_initted) {
-               /* interrupt on ext/status changes, all received chars,
-                  transmit ready */
-               info->curregs[1] = (info->curregs[1] & ~0x18)
-                               | (EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB);
-       } else {
-               /* interrupt on ext/status changes, W/Req pin is
-                  receive DMA request */
-               info->curregs[1] = (info->curregs[1] & ~(0x18 | TxINT_ENAB))
-                               | (EXT_INT_ENAB | WT_RDY_RT | WT_FN_RDYFN);
-               write_zsreg(info->zs_channel, 1, info->curregs[1]);
-               /* enable W/Req pin */
-               info->curregs[1] |= WT_RDY_ENAB;
-               write_zsreg(info->zs_channel, 1, info->curregs[1]);
-               /* enable interrupts on transmit ready and receive errors */
-               info->curregs[1] |= INT_ERR_Rx | TxINT_ENAB;
-       }
-       info->pendregs[1] = info->curregs[1];
-       info->curregs[3] |= (RxENABLE | Rx8);
-       info->pendregs[3] = info->curregs[3];
-       info->curregs[5] |= (TxENAB | Tx8);
-       info->pendregs[5] = info->curregs[5];
-       info->curregs[9] |= (NV | MIE);
-       info->pendregs[9] = info->curregs[9];
-       write_zsreg(info->zs_channel, 3, info->curregs[3]);
-       write_zsreg(info->zs_channel, 5, info->curregs[5]);
-       write_zsreg(info->zs_channel, 9, info->curregs[9]);
-
-       if (info->tty)
-               clear_bit(TTY_IO_ERROR, &info->tty->flags);
-       info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-       spin_unlock_irqrestore(&info->lock, flags);
-
-       /*
-        * Set the speed of the serial port
-        */
-       change_speed(info, 0);
-
-       /* Save the current value of RR0 */
-       info->read_reg_zero = read_zsreg(info->zs_channel, 0);
-
-       if (info->dma_initted) {
-               spin_lock_irqsave(&info->rx_dma_lock, flags);
-               rxdma_start(info, 0);
-               info->poll_dma_timer.expires = RX_DMA_TIMER;
-               add_timer(&info->poll_dma_timer);
-               spin_unlock_irqrestore(&info->rx_dma_lock, flags);
-       }
-
-       return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct mac_serial * info)
-{
-       OPNDBG("Shutting down serial port %d (irq %d)....\n", info->line,
-              info->irq);
-
-       if (!(info->flags & ZILOG_INITIALIZED)) {
-               OPNDBG("(already shutdown)\n");
-               return;
-       }
-
-       if (info->has_dma) {
-               del_timer(&info->poll_dma_timer);
-               dbdma_reset(info->tx_dma);
-               dbdma_reset(&info->rx->dma);
-               disable_irq(info->tx_dma_irq);
-               disable_irq(info->rx_dma_irq);
-       }
-       disable_irq(info->irq);
-
-       info->pendregs[1] = info->curregs[1] = 0;
-       write_zsreg(info->zs_channel, 1, 0);    /* no interrupts */
-
-       info->curregs[3] &= ~RxENABLE;
-       info->pendregs[3] = info->curregs[3];
-       write_zsreg(info->zs_channel, 3, info->curregs[3]);
-
-       info->curregs[5] &= ~TxENAB;
-       if (!info->tty || C_HUPCL(info->tty))
-               info->curregs[5] &= ~DTR;
-       info->pendregs[5] = info->curregs[5];
-       write_zsreg(info->zs_channel, 5, info->curregs[5]);
-
-       if (info->tty)
-               set_bit(TTY_IO_ERROR, &info->tty->flags);
-
-       set_scc_power(info, 0);
-
-       if (info->xmit_buf) {
-               free_page((unsigned long) info->xmit_buf);
-               info->xmit_buf = 0;
-       }
-
-       if (info->has_dma && info->dma_priv) {
-               kfree(info->dma_priv);
-               info->dma_priv = NULL;
-               info->dma_initted = 0;
-       }
-
-       memset(info->curregs, 0, sizeof(info->curregs));
-       memset(info->pendregs, 0, sizeof(info->pendregs));
-
-       info->flags &= ~ZILOG_INITIALIZED;
-}
-
-/*
- * Turn power on or off to the SCC and associated stuff
- * (port drivers, modem, IR port, etc.)
- * Returns the number of milliseconds we should wait before
- * trying to use the port.
- */
-static int set_scc_power(struct mac_serial * info, int state)
-{
-       int delay = 0;
-
-       if (state) {
-               PWRDBG("ttyS%d: powering up hardware\n", info->line);
-               pmac_call_feature(
-                       PMAC_FTR_SCC_ENABLE,
-                       info->dev_node, info->port_type, 1);
-               if (info->is_internal_modem) {
-                       pmac_call_feature(
-                               PMAC_FTR_MODEM_ENABLE,
-                               info->dev_node, 0, 1);
-                       delay = 2500;   /* wait for 2.5s before using */
-               } else if (info->is_irda)
-                       mdelay(50);     /* Do better here once the problems
-                                        * with blocking have been ironed out
-                                        */
-       } else {
-               /* TODO: Make that depend on a timer, don't power down
-                * immediately
-                */
-               PWRDBG("ttyS%d: shutting down hardware\n", info->line);
-               if (info->is_internal_modem) {
-                       PWRDBG("ttyS%d: shutting down modem\n", info->line);
-                       pmac_call_feature(
-                               PMAC_FTR_MODEM_ENABLE,
-                               info->dev_node, 0, 0);
-               }
-               pmac_call_feature(
-                       PMAC_FTR_SCC_ENABLE,
-                       info->dev_node, info->port_type, 0);
-       }
-       return delay;
-}
-
-static void irda_rts_pulses(struct mac_serial *info, int w)
-{
-       udelay(w);
-       write_zsreg(info->zs_channel, 5, Tx8 | TxENAB);
-       udelay(2);
-       write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS);
-       udelay(8);
-       write_zsreg(info->zs_channel, 5, Tx8 | TxENAB);
-       udelay(4);
-       write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS);
-}
-
-/*
- * Set the irda codec on the imac to the specified baud rate.
- */
-static void irda_setup(struct mac_serial *info)
-{
-       int code, speed, t;
-
-       speed = info->tty->termios->c_cflag & CBAUD;
-       if (speed < B2400 || speed > B115200)
-               return;
-       code = 0x4d + B115200 - speed;
-
-       /* disable serial interrupts and receive DMA */
-       write_zsreg(info->zs_channel, 1, info->curregs[1] & ~0x9f);
-
-       /* wait for transmitter to drain */
-       t = 10000;
-       while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0
-              || (read_zsreg(info->zs_channel, 1) & ALL_SNT) == 0) {
-               if (--t <= 0) {
-                       printk(KERN_ERR "transmitter didn't drain\n");
-                       return;
-               }
-               udelay(10);
-       }
-       udelay(100);
-
-       /* set to 8 bits, no parity, 19200 baud, RTS on, DTR off */
-       write_zsreg(info->zs_channel, 4, X16CLK | SB1);
-       write_zsreg(info->zs_channel, 11, TCBR | RCBR);
-       t = BPS_TO_BRG(19200, ZS_CLOCK/16);
-       write_zsreg(info->zs_channel, 12, t);
-       write_zsreg(info->zs_channel, 13, t >> 8);
-       write_zsreg(info->zs_channel, 14, BRENABL);
-       write_zsreg(info->zs_channel, 3, Rx8 | RxENABLE);
-       write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS);
-
-       /* set TxD low for ~104us and pulse RTS */
-       udelay(1000);
-       write_zsdata(info->zs_channel, 0xfe);
-       irda_rts_pulses(info, 150);
-       irda_rts_pulses(info, 180);
-       irda_rts_pulses(info, 50);
-       udelay(100);
-
-       /* assert DTR, wait 30ms, talk to the chip */
-       write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS | DTR);
-       mdelay(30);
-       while (read_zsreg(info->zs_channel, 0) & Rx_CH_AV)
-               read_zsdata(info->zs_channel);
-
-       write_zsdata(info->zs_channel, 1);
-       t = 1000;
-       while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) == 0) {
-               if (--t <= 0) {
-                       printk(KERN_ERR "irda_setup timed out on 1st byte\n");
-                       goto out;
-               }
-               udelay(10);
-       }
-       t = read_zsdata(info->zs_channel);
-       if (t != 4)
-               printk(KERN_ERR "irda_setup 1st byte = %x\n", t);
-
-       write_zsdata(info->zs_channel, code);
-       t = 1000;
-       while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) == 0) {
-               if (--t <= 0) {
-                       printk(KERN_ERR "irda_setup timed out on 2nd byte\n");
-                       goto out;
-               }
-               udelay(10);
-       }
-       t = read_zsdata(info->zs_channel);
-       if (t != code)
-               printk(KERN_ERR "irda_setup 2nd byte = %x (%x)\n", t, code);
-
-       /* Drop DTR again and do some more RTS pulses */
- out:
-       udelay(100);
-       write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS);
-       irda_rts_pulses(info, 80);
-
-       /* We should be right to go now.  We assume that load_zsregs
-          will get called soon to load up the correct baud rate etc. */
-       info->curregs[5] = (info->curregs[5] | RTS) & ~DTR;
-       info->pendregs[5] = info->curregs[5];
-}
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(struct mac_serial *info, struct termios *old_termios)
-{
-       unsigned cflag;
-       int     bits;
-       int     brg, baud;
-       unsigned long flags;
-
-       if (!info->tty || !info->tty->termios)
-               return;
-
-       cflag = info->tty->termios->c_cflag;
-       baud = tty_get_baud_rate(info->tty);
-       if (baud == 0) {
-               if (old_termios) {
-                       info->tty->termios->c_cflag &= ~CBAUD;
-                       info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
-                       cflag = info->tty->termios->c_cflag;
-                       baud = tty_get_baud_rate(info->tty);
-               }
-               else
-                       baud = info->zs_baud;
-       }
-       if (baud > 230400)
-               baud = 230400;
-       else if (baud == 0)
-               baud = 38400;
-
-       spin_lock_irqsave(&info->lock, flags);
-       info->zs_baud = baud;
-       info->clk_divisor = 16;
-
-       BAUDBG(KERN_DEBUG "set speed to %d bds, ", baud);
-
-       switch (baud) {
-       case ZS_CLOCK/16:       /* 230400 */
-               info->curregs[4] = X16CLK;
-               info->curregs[11] = 0;
-               break;
-       case ZS_CLOCK/32:       /* 115200 */
-               info->curregs[4] = X32CLK;
-               info->curregs[11] = 0;
-               break;
-       default:
-               info->curregs[4] = X16CLK;
-               info->curregs[11] = TCBR | RCBR;
-               brg = BPS_TO_BRG(baud, ZS_CLOCK/info->clk_divisor);
-               info->curregs[12] = (brg & 255);
-               info->curregs[13] = ((brg >> 8) & 255);
-               info->curregs[14] = BRENABL;
-       }
-
-       /* byte size and parity */
-       info->curregs[3] &= ~RxNBITS_MASK;
-       info->curregs[5] &= ~TxNBITS_MASK;
-       switch (cflag & CSIZE) {
-       case CS5:
-               info->curregs[3] |= Rx5;
-               info->curregs[5] |= Tx5;
-               BAUDBG("5 bits, ");
-               bits = 7;
-               break;
-       case CS6:
-               info->curregs[3] |= Rx6;
-               info->curregs[5] |= Tx6;
-               BAUDBG("6 bits, ");
-               bits = 8;
-               break;
-       case CS7:
-               info->curregs[3] |= Rx7;
-               info->curregs[5] |= Tx7;
-               BAUDBG("7 bits, ");
-               bits = 9;
-               break;
-       case CS8:
-       default: /* defaults to 8 bits */
-               info->curregs[3] |= Rx8;
-               info->curregs[5] |= Tx8;
-               BAUDBG("8 bits, ");
-               bits = 10;
-               break;
-       }
-       info->pendregs[3] = info->curregs[3];
-       info->pendregs[5] = info->curregs[5];
-
-       info->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN);
-       if (cflag & CSTOPB) {
-               info->curregs[4] |= SB2;
-               bits++;
-               BAUDBG("2 stop, ");
-       } else {
-               info->curregs[4] |= SB1;
-               BAUDBG("1 stop, ");
-       }
-       if (cflag & PARENB) {
-               bits++;
-               info->curregs[4] |= PAR_ENA;
-               BAUDBG("parity, ");
-       }
-       if (!(cflag & PARODD)) {
-               info->curregs[4] |= PAR_EVEN;
-       }
-       info->pendregs[4] = info->curregs[4];
-
-       if (!(cflag & CLOCAL)) {
-               if (!(info->curregs[15] & DCDIE))
-                       info->read_reg_zero = read_zsreg(info->zs_channel, 0);
-               info->curregs[15] |= DCDIE;
-       } else
-               info->curregs[15] &= ~DCDIE;
-       if (cflag & CRTSCTS) {
-               info->curregs[15] |= CTSIE;
-               if ((read_zsreg(info->zs_channel, 0) & CTS) != 0)
-                       info->tx_stopped = 1;
-       } else {
-               info->curregs[15] &= ~CTSIE;
-               info->tx_stopped = 0;
-       }
-       info->pendregs[15] = info->curregs[15];
-
-       /* Calc timeout value. This is pretty broken with high baud rates with HZ=100.
-          This code would love a larger HZ and a >1 fifo size, but this is not
-          a priority. The resulting value must be >HZ/2
-        */
-       info->timeout = ((info->xmit_fifo_size*HZ*bits) / baud);
-       info->timeout += HZ/50+1;       /* Add .02 seconds of slop */
-
-       BAUDBG("timeout=%d/%ds, base:%d\n", (int)info->timeout, (int)HZ,
-              (int)info->baud_base);
-
-       /* set the irda codec to the right rate */
-       if (info->is_irda)
-               irda_setup(info);
-
-       /* Load up the new values */
-       load_zsregs(info->zs_channel, info->curregs);
-
-       spin_unlock_irqrestore(&info->lock, flags);
-}
-
-static void rs_flush_chars(struct tty_struct *tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       unsigned long flags;
-
-       if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
-               return;
-
-       spin_lock_irqsave(&info->lock, flags);
-       if (!(info->xmit_cnt <= 0 || tty->stopped || info->tx_stopped ||
-             !info->xmit_buf))
-               /* Enable transmitter */
-               transmit_chars(info);
-       spin_unlock_irqrestore(&info->lock, flags);
-}
-
-static int rs_write(struct tty_struct * tty,
-                   const unsigned char *buf, int count)
-{
-       int     c, ret = 0;
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       unsigned long flags;
-
-       if (serial_paranoia_check(info, tty->name, "rs_write"))
-               return 0;
-
-       if (!tty || !info->xmit_buf || !tmp_buf)
-               return 0;
-
-       while (1) {
-               spin_lock_irqsave(&info->lock, flags);
-               c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-                                         SERIAL_XMIT_SIZE - info->xmit_head));
-               if (c <= 0) {
-                       spin_unlock_irqrestore(&info->lock, flags);
-                       break;
-               }
-               memcpy(info->xmit_buf + info->xmit_head, buf, c);
-               info->xmit_head = ((info->xmit_head + c) &
-                                  (SERIAL_XMIT_SIZE-1));
-               info->xmit_cnt += c;
-               spin_unlock_irqrestore(&info->lock, flags);
-               buf += c;
-               count -= c;
-               ret += c;
-       }
-       spin_lock_irqsave(&info->lock, flags);
-       if (info->xmit_cnt && !tty->stopped && !info->tx_stopped
-           && !info->tx_active)
-               transmit_chars(info);
-       spin_unlock_irqrestore(&info->lock, flags);
-       return ret;
-}
-
-static int rs_write_room(struct tty_struct *tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       int     ret;
-
-       if (serial_paranoia_check(info, tty->name, "rs_write_room"))
-               return 0;
-       ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-       if (ret < 0)
-               ret = 0;
-       return ret;
-}
-
-static int rs_chars_in_buffer(struct tty_struct *tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-
-       if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
-               return 0;
-       return info->xmit_cnt;
-}
-
-static void rs_flush_buffer(struct tty_struct *tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       unsigned long flags;
-
-       if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
-               return;
-       spin_lock_irqsave(&info->lock, flags);
-       info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-       spin_unlock_irqrestore(&info->lock, flags);
-       tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- * 
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_throttle(struct tty_struct * tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       unsigned long flags;
-#ifdef SERIAL_DEBUG_THROTTLE
-       printk(KERN_DEBUG "throttle %ld....\n",tty->ldisc.chars_in_buffer(tty));
-#endif
-
-       if (serial_paranoia_check(info, tty->name, "rs_throttle"))
-               return;
-
-       if (I_IXOFF(tty)) {
-               spin_lock_irqsave(&info->lock, flags);
-               info->x_char = STOP_CHAR(tty);
-               if (!info->tx_active)
-                       transmit_chars(info);
-               spin_unlock_irqrestore(&info->lock, flags);
-       }
-
-       if (C_CRTSCTS(tty)) {
-               /*
-                * Here we want to turn off the RTS line.  On Macintoshes,
-                * the external serial ports using a DIN-8 or DIN-9
-                * connector only have the DTR line (which is usually
-                * wired to both RTS and DTR on an external modem in
-                * the cable).  RTS doesn't go out to the serial port
-                * socket, it acts as an output enable for the transmit
-                * data line.  So in this case we don't drop RTS.
-                *
-                * Macs with internal modems generally do have both RTS
-                * and DTR wired to the modem, so in that case we do
-                * drop RTS.
-                */
-               if (info->is_internal_modem) {
-                       spin_lock_irqsave(&info->lock, flags);
-                       info->curregs[5] &= ~RTS;
-                       info->pendregs[5] &= ~RTS;
-                       write_zsreg(info->zs_channel, 5, info->curregs[5]);
-                       spin_unlock_irqrestore(&info->lock, flags);
-               }
-       }
-       
-#ifdef CDTRCTS
-       if (tty->termios->c_cflag & CDTRCTS) {
-               spin_lock_irqsave(&info->lock, flags);
-               info->curregs[5] &= ~DTR;
-               info->pendregs[5] &= ~DTR;
-               write_zsreg(info->zs_channel, 5, info->curregs[5]);
-               spin_unlock_irqrestore(&info->lock, flags);
-       }
-#endif /* CDTRCTS */
-}
-
-static void rs_unthrottle(struct tty_struct * tty)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       unsigned long flags;
-#ifdef SERIAL_DEBUG_THROTTLE
-       printk(KERN_DEBUG "unthrottle %s: %d....\n",
-                       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-       if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
-               return;
-
-       if (I_IXOFF(tty)) {
-               spin_lock_irqsave(&info->lock, flags);
-               if (info->x_char)
-                       info->x_char = 0;
-               else {
-                       info->x_char = START_CHAR(tty);
-                       if (!info->tx_active)
-                               transmit_chars(info);
-               }
-               spin_unlock_irqrestore(&info->lock, flags);
-       }
-
-       if (C_CRTSCTS(tty) && info->is_internal_modem) {
-               /* Assert RTS line */
-               spin_lock_irqsave(&info->lock, flags);
-               info->curregs[5] |= RTS;
-               info->pendregs[5] |= RTS;
-               write_zsreg(info->zs_channel, 5, info->curregs[5]);
-               spin_unlock_irqrestore(&info->lock, flags);
-       }
-
-#ifdef CDTRCTS
-       if (tty->termios->c_cflag & CDTRCTS) {
-               /* Assert DTR line */
-               spin_lock_irqsave(&info->lock, flags);
-               info->curregs[5] |= DTR;
-               info->pendregs[5] |= DTR;
-               write_zsreg(info->zs_channel, 5, info->curregs[5]);
-               spin_unlock_irqrestore(&info->lock, flags);
-       }
-#endif
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct mac_serial * info,
-                          struct serial_struct __user * retinfo)
-{
-       struct serial_struct tmp;
-  
-       if (!retinfo)
-               return -EFAULT;
-       memset(&tmp, 0, sizeof(tmp));
-       tmp.type = info->type;
-       tmp.line = info->line;
-       tmp.port = info->port;
-       tmp.irq = info->irq;
-       tmp.flags = info->flags;
-       tmp.baud_base = info->baud_base;
-       tmp.close_delay = info->close_delay;
-       tmp.closing_wait = info->closing_wait;
-       tmp.custom_divisor = info->custom_divisor;
-       if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
-               return -EFAULT;
-       return 0;
-}
-
-static int set_serial_info(struct mac_serial * info,
-                          struct serial_struct __user * new_info)
-{
-       struct serial_struct new_serial;
-       struct mac_serial old_info;
-       int                     retval = 0;
-
-       if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
-               return -EFAULT;
-       old_info = *info;
-
-       if (!capable(CAP_SYS_ADMIN)) {
-               if ((new_serial.baud_base != info->baud_base) ||
-                   (new_serial.type != info->type) ||
-                   (new_serial.close_delay != info->close_delay) ||
-                   ((new_serial.flags & ~ZILOG_USR_MASK) !=
-                    (info->flags & ~ZILOG_USR_MASK)))
-                       return -EPERM;
-               info->flags = ((info->flags & ~ZILOG_USR_MASK) |
-                              (new_serial.flags & ZILOG_USR_MASK));
-               info->custom_divisor = new_serial.custom_divisor;
-               goto check_and_exit;
-       }
-
-       if (info->count > 1)
-               return -EBUSY;
-
-       /*
-        * OK, past this point, all the error checking has been done.
-        * At this point, we start making changes.....
-        */
-
-       info->baud_base = new_serial.baud_base;
-       info->flags = ((info->flags & ~ZILOG_FLAGS) |
-                       (new_serial.flags & ZILOG_FLAGS));
-       info->type = new_serial.type;
-       info->close_delay = new_serial.close_delay;
-       info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
-       if (info->flags & ZILOG_INITIALIZED)
-               retval = setup_scc(info);
-       return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- *         is emptied.  On bus types like RS485, the transmitter must
- *         release the bus after transmitting. This must be done when
- *         the transmit shift register is empty, not be done when the
- *         transmit holding register is empty.  This functionality
- *         allows an RS485 driver to be written in user space. 
- */
-static int get_lsr_info(struct mac_serial * info, unsigned int *value)
-{
-       unsigned char status;
-       unsigned long flags;
-
-       spin_lock_irqsave(&info->lock, flags);
-       status = read_zsreg(info->zs_channel, 0);
-       spin_unlock_irqrestore(&info->lock, flags);
-       status = (status & Tx_BUF_EMP)? TIOCSER_TEMT: 0;
-       return put_user(status,value);
-}
-
-static int rs_tiocmget(struct tty_struct *tty, struct file *file)
-{
-       struct mac_serial * info = (struct mac_serial *)tty->driver_data;
-       unsigned char control, status;
-       unsigned long flags;
-
-#ifdef CONFIG_KGDB
-       if (info->kgdb_channel)
-               return -ENODEV;
-#endif
-       if (serial_paranoia_check(info, tty->name, __FUNCTION__))
-               return -ENODEV;
-
-       if (tty->flags & (1 << TTY_IO_ERROR))
-               return -EIO;
-
-       spin_lock_irqsave(&info->lock, flags);
-       control = info->curregs[5];
-       status = read_zsreg(info->zs_channel, 0);
-       spin_unlock_irqrestore(&info->lock, flags);
-       return    ((control & RTS) ? TIOCM_RTS: 0)
-               | ((control & DTR) ? TIOCM_DTR: 0)
-               | ((status  & DCD) ? TIOCM_CAR: 0)
-               | ((status  & CTS) ? 0: TIOCM_CTS);
-}
-
-static int rs_tiocmset(struct tty_struct *tty, struct file *file,
-                      unsigned int set, unsigned int clear)
-{
-       struct mac_serial * info = (struct mac_serial *)tty->driver_data;
-       unsigned int arg, bits;
-       unsigned long flags;
-
-#ifdef CONFIG_KGDB
-       if (info->kgdb_channel)
-               return -ENODEV;
-#endif
-       if (serial_paranoia_check(info, tty->name, __FUNCTION__))
-               return -ENODEV;
-
-       if (tty->flags & (1 << TTY_IO_ERROR))
-               return -EIO;
-
-       spin_lock_irqsave(&info->lock, flags);
-       if (set & TIOCM_RTS)
-               info->curregs[5] |= RTS;
-       if (set & TIOCM_DTR)
-               info->curregs[5] |= DTR;
-       if (clear & TIOCM_RTS)
-               info->curregs[5] &= ~RTS;
-       if (clear & TIOCM_DTR)
-               info->curregs[5] &= ~DTR;
-
-       info->pendregs[5] = info->curregs[5];
-       write_zsreg(info->zs_channel, 5, info->curregs[5]);
-       spin_unlock_irqrestore(&info->lock, flags);
-       return 0;
-}
-
-/*
- * rs_break - turn transmit break condition on/off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-       struct mac_serial *info = (struct mac_serial *) tty->driver_data;
-       unsigned long flags;
-
-       if (serial_paranoia_check(info, tty->name, "rs_break"))
-               return;
-
-       spin_lock_irqsave(&info->lock, flags);
-       if (break_state == -1)
-               info->curregs[5] |= SND_BRK;
-       else
-               info->curregs[5] &= ~SND_BRK;
-       write_zsreg(info->zs_channel, 5, info->curregs[5]);
-       spin_unlock_irqrestore(&info->lock, flags);
-}
-
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
-                   unsigned int cmd, unsigned long arg)
-{
-       struct mac_serial * info = (struct mac_serial *)tty->driver_data;
-
-#ifdef CONFIG_KGDB
-       if (info->kgdb_channel)
-               return -ENODEV;
-#endif
-       if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
-               return -ENODEV;
-
-       if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-           (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT)) {
-               if (tty->flags & (1 << TTY_IO_ERROR))
-                   return -EIO;
-       }
-
-       switch (cmd) {
-               case TIOCGSERIAL:
-                       return get_serial_info(info,
-                                       (struct serial_struct __user *) arg);
-               case TIOCSSERIAL:
-                       return set_serial_info(info,
-                                       (struct serial_struct __user *) arg);
-               case TIOCSERGETLSR: /* Get line status register */
-                       return get_lsr_info(info, (unsigned int *) arg);
-
-               case TIOCSERGSTRUCT:
-                       if (copy_to_user((struct mac_serial __user *) arg,
-                                        info, sizeof(struct mac_serial)))
-                               return -EFAULT;
-                       return 0;
-
-               default:
-                       return -ENOIOCTLCMD;
-               }
-       return 0;
-}
-
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
-{
-       struct mac_serial *info = (struct mac_serial *)tty->driver_data;
-       int was_stopped;
-
-       if (tty->termios->c_cflag == old_termios->c_cflag)
-               return;
-       was_stopped = info->tx_stopped;
-
-       change_speed(info, old_termios);
-
-       if (was_stopped && !info->tx_stopped) {
-               tty->hw_stopped = 0;
-               rs_start(tty);
-       }
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- * 
- * This routine is called when the serial port gets closed.
- * Wait for the last remaining data to be sent.
- * ------------------------------------------------------------
- */
-static void rs_close(struct tty_struct *tty, struct file * filp)
-{
-       struct mac_serial * info = (struct mac_serial *)tty->driver_data;
-       unsigned long flags;
-
-       if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
-               return;
-
-       spin_lock_irqsave(&info->lock, flags);
-
-       if (tty_hung_up_p(filp)) {
-               spin_unlock_irqrestore(&info->lock, flags);
-               return;
-       }
-
-       OPNDBG("rs_close ttyS%d, count = %d\n", info->line, info->count);
-       if ((tty->count == 1) && (info->count != 1)) {
-               /*
-                * Uh, oh.  tty->count is 1, which means that the tty
-                * structure will be freed.  Info->count should always
-                * be one in these conditions.  If it's greater than
-                * one, we've got real problems, since it means the
-                * serial port won't be shutdown.
-                */
-               printk(KERN_ERR "rs_close: bad serial port count; tty->count "
-                               "is 1, info->count is %d\n", info->count);
-               info->count = 1;
-       }
-       if (--info->count < 0) {
-               printk(KERN_ERR "rs_close: bad serial port count for "
-                               "ttyS%d: %d\n", info->line, info->count);
-               info->count = 0;
-       }
-       if (info->count) {
-               spin_unlock_irqrestore(&info->lock, flags);
-               return;
-       }
-       info->flags |= ZILOG_CLOSING;
-       /*
-        * Now we wait for the transmit buffer to clear; and we notify 
-        * the line discipline to only process XON/XOFF characters.
-        */
-       OPNDBG("waiting end of Tx... (timeout:%d)\n", info->closing_wait);
-       tty->closing = 1;
-       if (info->closing_wait != ZILOG_CLOSING_WAIT_NONE) {
-               spin_unlock_irqrestore(&info->lock, flags);
-               tty_wait_until_sent(tty, info->closing_wait);
-               spin_lock_irqsave(&info->lock, flags);
-       }
-
-       /*
-        * At this point we stop accepting input.  To do this, we
-        * disable the receiver and receive interrupts.
-        */
-       info->curregs[3] &= ~RxENABLE;
-       info->pendregs[3] = info->curregs[3];
-       write_zsreg(info->zs_channel, 3, info->curregs[3]);
-       info->curregs[1] &= ~(0x18);    /* disable any rx ints */
-       info->pendregs[1] = info->curregs[1];
-       write_zsreg(info->zs_channel, 1, info->curregs[1]);
-       ZS_CLEARFIFO(info->zs_channel);
-       if (info->flags & ZILOG_INITIALIZED) {
-               /*
-                * Before we drop DTR, make sure the SCC transmitter
-                * has completely drained.
-                */
-               OPNDBG("waiting end of Rx...\n");
-               spin_unlock_irqrestore(&info->lock, flags);
-               rs_wait_until_sent(tty, info->timeout);
-               spin_lock_irqsave(&info->lock, flags);
-       }
-
-       shutdown(info);
-       /* restore flags now since shutdown() will have disabled this port's
-          specific irqs */
-       spin_unlock_irqrestore(&info->lock, flags);
-
-       if (tty->driver->flush_buffer)
-               tty->driver->flush_buffer(tty);
-       tty_ldisc_flush(tty);
-       tty->closing = 0;
-       info->event = 0;
-       info->tty = 0;
-
-       if (info->blocked_open) {
-               if (info->close_delay) {
-                       msleep_interruptible(jiffies_to_msecs(info->close_delay));
-               }
-               wake_up_interruptible(&info->open_wait);
-       }
-       info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING);
-       wake_up_interruptible(&info->close_wait);
-}
-
-/*
- * rs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-       struct mac_serial *info = (struct mac_serial *) tty->driver_data;
-       unsigned long orig_jiffies, char_time;
-
-       if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
-               return;
-
-/*     printk("rs_wait_until_sent, timeout:%d, tty_stopped:%d, tx_stopped:%d\n",
-                       timeout, tty->stopped, info->tx_stopped);
-*/
-       orig_jiffies = jiffies;
-       /*
-        * Set the check interval to be 1/5 of the estimated time to
-        * send a single character, and make it at least 1.  The check
-        * interval should also be less than the timeout.
-        */
-       if (info->timeout <= HZ/50) {
-               printk(KERN_INFO "macserial: invalid info->timeout=%d\n",
-                                   info->timeout);
-               info->timeout = HZ/50+1;
-       }
-
-       char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
-       char_time = char_time / 5;
-       if (char_time > HZ) {
-               printk(KERN_WARNING "macserial: char_time %ld >HZ !!!\n",
-                                   char_time);
-               char_time = 1;
-       } else if (char_time == 0)
-               char_time = 1;
-       if (timeout)
-               char_time = min_t(unsigned long, char_time, timeout);
-       while ((read_zsreg(info->zs_channel, 1) & ALL_SNT) == 0) {
-               msleep_interruptible(jiffies_to_msecs(char_time));
-               if (signal_pending(current))
-                       break;
-               if (timeout && time_after(jiffies, orig_jiffies + timeout))
-                       break;
-       }
-       current->state = TASK_RUNNING;
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-static void rs_hangup(struct tty_struct *tty)
-{
-       struct mac_serial * info = (struct mac_serial *)tty->driver_data;
-
-       if (serial_paranoia_check(info, tty->name, "rs_hangup"))
-               return;
-
-       rs_flush_buffer(tty);
-       shutdown(info);
-       info->event = 0;
-       info->count = 0;
-       info->flags &= ~ZILOG_NORMAL_ACTIVE;
-       info->tty = 0;
-       wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-                          struct mac_serial *info)
-{
-       DECLARE_WAITQUEUE(wait,current);
-       int             retval;
-       int             do_clocal = 0;
-
-       /*
-        * If the device is in the middle of being closed, then block
-        * until it's done, and then try again.
-        */
-       if (info->flags & ZILOG_CLOSING) {
-               interruptible_sleep_on(&info->close_wait);
-               return -EAGAIN;
-       }
-
-       /*
-        * If non-blocking mode is set, or the port is not enabled,
-        * then make the check up front and then exit.
-        */
-       if ((filp->f_flags & O_NONBLOCK) ||
-           (tty->flags & (1 << TTY_IO_ERROR))) {
-               info->flags |= ZILOG_NORMAL_ACTIVE;
-               return 0;
-       }
-
-       if (tty->termios->c_cflag & CLOCAL)
-               do_clocal = 1;
-
-       /*
-        * Block waiting for the carrier detect and the line to become
-        * free (i.e., not in use by the callout).  While we are in
-        * this loop, info->count is dropped by one, so that
-        * rs_close() knows when to free things.  We restore it upon
-        * exit, either normal or abnormal.
-        */
-       retval = 0;
-       add_wait_queue(&info->open_wait, &wait);
-       OPNDBG("block_til_ready before block: ttyS%d, count = %d\n",
-              info->line, info->count);
-       spin_lock_irq(&info->lock);
-       if (!tty_hung_up_p(filp)) 
-               info->count--;
-       spin_unlock_irq(&info->lock);
-       info->blocked_open++;
-       while (1) {
-               spin_lock_irq(&info->lock);
-               if ((tty->termios->c_cflag & CBAUD) &&
-                   !info->is_irda)
-                       zs_rtsdtr(info, 1);
-               spin_unlock_irq(&info->lock);
-               set_current_state(TASK_INTERRUPTIBLE);
-               if (tty_hung_up_p(filp) ||
-                   !(info->flags & ZILOG_INITIALIZED)) {
-                       retval = -EAGAIN;
-                       break;
-               }
-               if (!(info->flags & ZILOG_CLOSING) &&
-                   (do_clocal || (read_zsreg(info->zs_channel, 0) & DCD)))
-                       break;
-               if (signal_pending(current)) {
-                       retval = -ERESTARTSYS;
-                       break;
-               }
-               OPNDBG("block_til_ready blocking: ttyS%d, count = %d\n",
-                      info->line, info->count);
-               schedule();
-       }
-       current->state = TASK_RUNNING;
-       remove_wait_queue(&info->open_wait, &wait);
-       if (!tty_hung_up_p(filp))
-               info->count++;
-       info->blocked_open--;
-       OPNDBG("block_til_ready after blocking: ttyS%d, count = %d\n",
-              info->line, info->count);
-       if (retval)
-               return retval;
-       info->flags |= ZILOG_NORMAL_ACTIVE;
-       return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its ZILOG structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int rs_open(struct tty_struct *tty, struct file * filp)
-{
-       struct mac_serial       *info;
-       int                     retval, line;
-       unsigned long           page;
-
-       line = tty->index;
-       if ((line < 0) || (line >= zs_channels_found)) {
-               return -ENODEV;
-       }
-       info = zs_soft + line;
-
-#ifdef CONFIG_KGDB
-       if (info->kgdb_channel) {
-               return -ENODEV;
-       }
-#endif
-       if (serial_paranoia_check(info, tty->name, "rs_open"))
-               return -ENODEV;
-       OPNDBG("rs_open %s, count = %d, tty=%p\n", tty->name,
-              info->count, tty);
-
-       info->count++;
-       tty->driver_data = info;
-       info->tty = tty;
-
-       if (!tmp_buf) {
-               page = get_zeroed_page(GFP_KERNEL);
-               if (!page)
-                       return -ENOMEM;
-               if (tmp_buf)
-                       free_page(page);
-               else
-                       tmp_buf = (unsigned char *) page;
-       }
-
-       /*
-        * If the port is the middle of closing, bail out now
-        */
-       if (tty_hung_up_p(filp) ||
-           (info->flags & ZILOG_CLOSING)) {
-               if (info->flags & ZILOG_CLOSING)
-                       interruptible_sleep_on(&info->close_wait);
-               return -EAGAIN;
-       }
-
-       /*
-        * Start up serial port
-        */
-
-       retval = startup(info);
-       if (retval)
-               return retval;
-
-       retval = block_til_ready(tty, filp, info);
-       if (retval) {
-               OPNDBG("rs_open returning after block_til_ready with %d\n",
-                       retval);
-               return retval;
-       }
-
-#ifdef CONFIG_SERIAL_CONSOLE
-       if (sercons.cflag && sercons.index == line) {
-               tty->termios->c_cflag = sercons.cflag;
-               sercons.cflag = 0;
-               change_speed(info, 0);
-       }
-#endif
-
-       OPNDBG("rs_open %s successful...\n", tty->name);
-       return 0;
-}
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
-       printk(KERN_INFO "PowerMac Z8530 serial driver version " MACSERIAL_VERSION "\n");
-}
-
-/*
- * Initialize one channel, both the mac_serial and mac_zschannel
- * structs.  We use the dev_node field of the mac_serial struct.
- */
-static int
-chan_init(struct mac_serial *zss, struct mac_zschannel *zs_chan,
-         struct mac_zschannel *zs_chan_a)
-{
-       struct device_node *ch = zss->dev_node;
-       char *conn;
-       int len;
-       struct slot_names_prop {
-               int     count;
-               char    name[1];
-       } *slots;
-
-       zss->irq = ch->intrs[0].line;
-       zss->has_dma = 0;
-#if !defined(CONFIG_KGDB) && defined(SUPPORT_SERIAL_DMA)
-       if (ch->n_addrs >= 3 && ch->n_intrs == 3)
-               zss->has_dma = 1;
-#endif
-       zss->dma_initted = 0;
-
-       zs_chan->control = (volatile unsigned char *)
-               ioremap(ch->addrs[0].address, 0x1000);
-       zs_chan->data = zs_chan->control + 0x10;
-       spin_lock_init(&zs_chan->lock);
-       zs_chan->parent = zss;
-       zss->zs_channel = zs_chan;
-       zss->zs_chan_a = zs_chan_a;
-
-       /* setup misc varariables */
-       zss->kgdb_channel = 0;
-
-       /* For now, we assume you either have a slot-names property
-        * with "Modem" in it, or your channel is compatible with
-        * "cobalt". Might need additional fixups
-        */
-       zss->is_internal_modem = device_is_compatible(ch, "cobalt");
-       conn = get_property(ch, "AAPL,connector", &len);
-       zss->is_irda = conn && (strcmp(conn, "infrared") == 0);
-       zss->port_type = PMAC_SCC_ASYNC;
-       /* 1999 Powerbook G3 has slot-names property instead */
-       slots = (struct slot_names_prop *)get_property(ch, "slot-names", &len);
-       if (slots && slots->count > 0) {
-               if (strcmp(slots->name, "IrDA") == 0)
-                       zss->is_irda = 1;
-               else if (strcmp(slots->name, "Modem") == 0)
-                       zss->is_internal_modem = 1;
-       }
-       if (zss->is_irda)
-               zss->port_type = PMAC_SCC_IRDA;
-       if (zss->is_internal_modem) {
-               struct device_node* i2c_modem = find_devices("i2c-modem");
-               if (i2c_modem) {
-                       char* mid = get_property(i2c_modem, "modem-id", NULL);
-                       if (mid) switch(*mid) {
-                       case 0x04 :
-                       case 0x05 :
-                       case 0x07 :
-                       case 0x08 :
-                       case 0x0b :
-                       case 0x0c :
-                               zss->port_type = PMAC_SCC_I2S1;
-                       }
-                       printk(KERN_INFO "macserial: i2c-modem detected, id: %d\n",
-                               mid ? (*mid) : 0);
-               } else {
-                       printk(KERN_INFO "macserial: serial modem detected\n");
-               }
-       }
-
-       while (zss->has_dma) {
-               zss->dma_priv = NULL;
-               /* it seems that the last two addresses are the
-                  DMA controllers */
-               zss->tx_dma = (volatile struct dbdma_regs *)
-                       ioremap(ch->addrs[ch->n_addrs - 2].address, 0x100);
-               zss->rx = (volatile struct mac_dma *)
-                       ioremap(ch->addrs[ch->n_addrs - 1].address, 0x100);
-               zss->tx_dma_irq = ch->intrs[1].line;
-               zss->rx_dma_irq = ch->intrs[2].line;
-               spin_lock_init(&zss->rx_dma_lock);
-               break;
-       }
-
-       init_timer(&zss->powerup_timer);
-       zss->powerup_timer.function = powerup_done;
-       zss->powerup_timer.data = (unsigned long) zss;
-       return 0;
-}
-
-/*
- * /proc fs routines. TODO: Add status lines & error stats
- */
-static inline int
-line_info(char *buf, struct mac_serial *info)
-{
-       int             ret=0;
-       unsigned char* connector;
-       int lenp;
-
-       ret += sprintf(buf, "%d: port:0x%X irq:%d", info->line, info->port, info->irq);
-
-       connector = get_property(info->dev_node, "AAPL,connector", &lenp);
-       if (connector)
-               ret+=sprintf(buf+ret," con:%s ", connector);
-       if (info->is_internal_modem) {
-               if (!connector)
-                       ret+=sprintf(buf+ret," con:");
-               ret+=sprintf(buf+ret,"%s", " (internal modem)");
-       }
-       if (info->is_irda) {
-               if (!connector)
-                       ret+=sprintf(buf+ret," con:");
-               ret+=sprintf(buf+ret,"%s", " (IrDA)");
-       }
-       ret+=sprintf(buf+ret,"\n");
-
-       return ret;
-}
-
-int macserial_read_proc(char *page, char **start, off_t off, int count,
-                int *eof, void *data)
-{
-       int l, len = 0;
-       off_t   begin = 0;
-       struct mac_serial *info;
-
-       len += sprintf(page, "serinfo:1.0 driver:" MACSERIAL_VERSION "\n");
-       for (info = zs_chain; info && len < 4000; info = info->zs_next) {
-               l = line_info(page + len, info);
-               len += l;
-               if (len+begin > off+count)
-                       goto done;
-               if (len+begin < off) {
-                       begin += len;
-                       len = 0;
-               }
-       }
-       *eof = 1;
-done:
-       if (off >= len+begin)
-               return 0;
-       *start = page + (off-begin);
-       return ((count < begin+len-off) ? count : begin+len-off);
-}
-
-/* Ask the PROM how many Z8530s we have and initialize their zs_channels */
-static void
-probe_sccs(void)
-{
-       struct device_node *dev, *ch;
-       struct mac_serial **pp;
-       int n, chip, nchan;
-       struct mac_zschannel *zs_chan;
-       int chan_a_index;
-
-       n = 0;
-       pp = &zs_chain;
-       zs_chan = zs_channels;
-       for (dev = find_devices("escc"); dev != 0; dev = dev->next) {
-               nchan = 0;
-               chip = n;
-               if (n >= NUM_CHANNELS) {
-                       printk(KERN_WARNING "Sorry, can't use %s: no more "
-                                           "channels\n", dev->full_name);
-                       continue;
-               }
-               chan_a_index = 0;
-               for (ch = dev->child; ch != 0; ch = ch->sibling) {
-                       if (nchan >= 2) {
-                               printk(KERN_WARNING "SCC: Only 2 channels per "
-                                       "chip are supported\n");
-                               break;
-                       }
-                       if (ch->n_addrs < 1 || (ch ->n_intrs < 1)) {
-                               printk("Can't use %s: %d addrs %d intrs\n",
-                                     ch->full_name, ch->n_addrs, ch->n_intrs);
-                               continue;
-                       }
-
-                       /* The channel with the higher address
-                          will be the A side. */
-                       if (nchan > 0 &&
-                           ch->addrs[0].address
-                           > zs_soft[n-1].dev_node->addrs[0].address)
-                               chan_a_index = 1;
-
-                       /* minimal initialization for now */
-                       zs_soft[n].dev_node = ch;
-                       *pp = &zs_soft[n];
-                       pp = &zs_soft[n].zs_next;
-                       ++nchan;
-                       ++n;
-               }
-               if (nchan == 0)
-                       continue;
-
-               /* set up A side */
-               if (chan_init(&zs_soft[chip + chan_a_index], zs_chan, zs_chan))
-                       continue;
-               ++zs_chan;
-
-               /* set up B side, if it exists */
-               if (nchan > 1)
-                       if (chan_init(&zs_soft[chip + 1 - chan_a_index],
-                                 zs_chan, zs_chan - 1))
-                               continue;
-               ++zs_chan;
-       }
-       *pp = 0;
-
-       zs_channels_found = n;
-#ifdef CONFIG_PMAC_PBOOK
-       if (n)
-               pmu_register_sleep_notifier(&serial_sleep_notifier);
-#endif /* CONFIG_PMAC_PBOOK */
-}
-
-static struct tty_operations serial_ops = {
-       .open = rs_open,
-       .close = rs_close,
-       .write = rs_write,
-       .flush_chars = rs_flush_chars,
-       .write_room = rs_write_room,
-       .chars_in_buffer = rs_chars_in_buffer,
-       .flush_buffer = rs_flush_buffer,
-       .ioctl = rs_ioctl,
-       .throttle = rs_throttle,
-       .unthrottle = rs_unthrottle,
-       .set_termios = rs_set_termios,
-       .stop = rs_stop,
-       .start = rs_start,
-       .hangup = rs_hangup,
-       .break_ctl = rs_break,
-       .wait_until_sent = rs_wait_until_sent,
-       .read_proc = macserial_read_proc,
-       .tiocmget = rs_tiocmget,
-       .tiocmset = rs_tiocmset,
-};
-
-static int macserial_init(void)
-{
-       int channel, i;
-       struct mac_serial *info;
-
-       /* Find out how many Z8530 SCCs we have */
-       if (zs_chain == 0)
-               probe_sccs();
-
-       serial_driver = alloc_tty_driver(zs_channels_found);
-       if (!serial_driver)
-               return -ENOMEM;
-
-       /* XXX assume it's a powerbook if we have a via-pmu
-        * 
-        * This is OK for core99 machines as well.
-        */
-       is_powerbook = find_devices("via-pmu") != 0;
-
-       /* Register the interrupt handler for each one
-        * We also request the OF resources here as probe_sccs()
-        * might be called too early for that
-        */
-       for (i = 0; i < zs_channels_found; ++i) {
-               struct device_node* ch = zs_soft[i].dev_node;
-               if (!request_OF_resource(ch, 0, NULL)) {
-                       printk(KERN_ERR "macserial: can't request IO resource !\n");
-                       put_tty_driver(serial_driver);
-                       return -ENODEV;
-               }
-               if (zs_soft[i].has_dma) {
-                       if (!request_OF_resource(ch, ch->n_addrs - 2, " (tx dma)")) {
-                               printk(KERN_ERR "macserial: can't request TX DMA resource !\n");
-                               zs_soft[i].has_dma = 0;
-                               goto no_dma;
-                       }
-                       if (!request_OF_resource(ch, ch->n_addrs - 1, " (rx dma)")) {
-                               release_OF_resource(ch, ch->n_addrs - 2);
-                               printk(KERN_ERR "macserial: can't request RX DMA resource !\n");
-                               zs_soft[i].has_dma = 0;
-                               goto no_dma;
-                       }
-                       if (request_irq(zs_soft[i].tx_dma_irq, rs_txdma_irq, 0,
-                                       "SCC-txdma", &zs_soft[i]))
-                               printk(KERN_ERR "macserial: can't get irq %d\n",
-                                      zs_soft[i].tx_dma_irq);
-                       disable_irq(zs_soft[i].tx_dma_irq);
-                       if (request_irq(zs_soft[i].rx_dma_irq, rs_rxdma_irq, 0,
-                                       "SCC-rxdma", &zs_soft[i]))
-                               printk(KERN_ERR "macserial: can't get irq %d\n",
-                                      zs_soft[i].rx_dma_irq);
-                       disable_irq(zs_soft[i].rx_dma_irq);
-               }
-no_dma:                
-               if (request_irq(zs_soft[i].irq, rs_interrupt, 0,
-                               "SCC", &zs_soft[i]))
-                       printk(KERN_ERR "macserial: can't get irq %d\n",
-                              zs_soft[i].irq);
-               disable_irq(zs_soft[i].irq);
-       }
-
-       show_serial_version();
-
-       /* Initialize the tty_driver structure */
-       /* Not all of this is exactly right for us. */
-
-       serial_driver->owner = THIS_MODULE;
-       serial_driver->driver_name = "macserial";
-       serial_driver->devfs_name = "tts/";
-       serial_driver->name = "ttyS";
-       serial_driver->major = TTY_MAJOR;
-       serial_driver->minor_start = 64;
-       serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-       serial_driver->subtype = SERIAL_TYPE_NORMAL;
-       serial_driver->init_termios = tty_std_termios;
-       serial_driver->init_termios.c_cflag =
-               B38400 | CS8 | CREAD | HUPCL | CLOCAL;
-       serial_driver->flags = TTY_DRIVER_REAL_RAW;
-       tty_set_operations(serial_driver, &serial_ops);
-
-       if (tty_register_driver(serial_driver))
-               printk(KERN_ERR "Error: couldn't register serial driver\n");
-
-       for (channel = 0; channel < zs_channels_found; ++channel) {
-#ifdef CONFIG_KGDB
-               if (zs_soft[channel].kgdb_channel) {
-                       kgdb_interruptible(1);
-                       continue;
-               }
-#endif
-               zs_soft[channel].clk_divisor = 16;
-/* -- we are not sure the SCC is powered ON at this point
-               zs_soft[channel].zs_baud = get_zsbaud(&zs_soft[channel]);
-*/
-               zs_soft[channel].zs_baud = 38400;
-
-               /* If console serial line, then enable interrupts. */
-               if (zs_soft[channel].is_cons) {
-                       printk(KERN_INFO "macserial: console line, enabling "
-                                       "interrupt %d\n", zs_soft[channel].irq);
-                       panic("macserial: console not supported yet !");
-                       write_zsreg(zs_soft[channel].zs_channel, R1,
-                                   (EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB));
-                       write_zsreg(zs_soft[channel].zs_channel, R9,
-                                   (NV | MIE));
-               }
-       }
-
-       for (info = zs_chain, i = 0; info; info = info->zs_next, i++)
-       {
-               unsigned char* connector;
-               int lenp;
-
-#ifdef CONFIG_KGDB
-               if (info->kgdb_channel) {
-                       continue;
-               }
-#endif
-               info->magic = SERIAL_MAGIC;
-               info->port = (int) info->zs_channel->control;
-               info->line = i;
-               info->tty = 0;
-               info->custom_divisor = 16;
-               info->timeout = 0;
-               info->close_delay = 50;
-               info->closing_wait = 3000;
-               info->x_char = 0;
-               info->event = 0;
-               info->count = 0;
-               info->blocked_open = 0;
-               INIT_WORK(&info->tqueue, do_softint, info);
-               spin_lock_init(&info->lock);
-               init_waitqueue_head(&info->open_wait);
-               init_waitqueue_head(&info->close_wait);
-               info->timeout = HZ;
-               printk(KERN_INFO "tty%02d at 0x%08x (irq = %d)", info->line, 
-                       info->port, info->irq);
-               printk(" is a Z8530 ESCC");
-               connector = get_property(info->dev_node, "AAPL,connector", &lenp);
-               if (connector)
-                       printk(", port = %s", connector);
-               if (info->is_internal_modem)
-                       printk(" (internal modem)");
-               if (info->is_irda)
-                       printk(" (IrDA)");
-               printk("\n");
-       }
-       tmp_buf = 0;
-
-       return 0;
-}
-
-void macserial_cleanup(void)
-{
-       int i;
-       unsigned long flags;
-       struct mac_serial *info;
-
-       for (info = zs_chain, i = 0; info; info = info->zs_next, i++)
-               set_scc_power(info, 0);
-       spin_lock_irqsave(&info->lock, flags);
-       for (i = 0; i < zs_channels_found; ++i) {
-               free_irq(zs_soft[i].irq, &zs_soft[i]);
-               if (zs_soft[i].has_dma) {
-                       free_irq(zs_soft[i].tx_dma_irq, &zs_soft[i]);
-                       free_irq(zs_soft[i].rx_dma_irq, &zs_soft[i]);
-               }
-               release_OF_resource(zs_soft[i].dev_node, 0);
-               if (zs_soft[i].has_dma) {
-                       struct device_node* ch = zs_soft[i].dev_node;
-                       release_OF_resource(ch, ch->n_addrs - 2);
-                       release_OF_resource(ch, ch->n_addrs - 1);
-               }
-       }
-       spin_unlock_irqrestore(&info->lock, flags);
-       tty_unregister_driver(serial_driver);
-       put_tty_driver(serial_driver);
-
-       if (tmp_buf) {
-               free_page((unsigned long) tmp_buf);
-               tmp_buf = 0;
-       }
-
-#ifdef CONFIG_PMAC_PBOOK
-       if (zs_channels_found)
-               pmu_unregister_sleep_notifier(&serial_sleep_notifier);
-#endif /* CONFIG_PMAC_PBOOK */
-}
-
-module_init(macserial_init);
-module_exit(macserial_cleanup);
-MODULE_LICENSE("GPL");
-
-#if 0
-/*
- * register_serial and unregister_serial allows for serial ports to be
- * configured at run-time, to support PCMCIA modems.
- */
-/* PowerMac: Unused at this time, just here to make things link. */
-int register_serial(struct serial_struct *req)
-{
-       return -1;
-}
-
-void unregister_serial(int line)
-{
-       return;
-}
-#endif
-
-/*
- * ------------------------------------------------------------
- * Serial console driver
- * ------------------------------------------------------------
- */
-#ifdef CONFIG_SERIAL_CONSOLE
-
-/*
- *     Print a string to the serial port trying not to disturb
- *     any possible real use of the port...
- */
-static void serial_console_write(struct console *co, const char *s,
-                                unsigned count)
-{
-       struct mac_serial *info = zs_soft + co->index;
-       int i;
-
-       /* Turn of interrupts and enable the transmitter. */
-       write_zsreg(info->zs_channel, R1, info->curregs[1] & ~TxINT_ENAB);
-       write_zsreg(info->zs_channel, R5, info->curregs[5] | TxENAB | RTS | DTR);
-
-       for (i=0; i<count; i++) {
-               /* Wait for the transmit buffer to empty. */
-               while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0) {
-                       eieio();
-               }
-
-               write_zsdata(info->zs_channel, s[i]);
-               if (s[i] == 10) {
-                       while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP)
-                                == 0)
-                               eieio();
-
-                       write_zsdata(info->zs_channel, 13);
-               }
-       }
-
-       /* Restore the values in the registers. */
-       write_zsreg(info->zs_channel, R1, info->curregs[1]);
-       /* Don't disable the transmitter. */
-}
-
-static struct tty_driver *serial_driver;
-
-static struct tty_driver *serial_console_device(struct console *c, int *index)
-{
-       *index = c->index;
-       return serial_driver;
-}
-
-/*
- *     Setup initial baud/bits/parity. We do two things here:
- *     - construct a cflag setting for the first rs_open()
- *     - initialize the serial port
- *     Return non-zero if we didn't find a serial port.
- */
-static int __init serial_console_setup(struct console *co, char *options)
-{
-       struct mac_serial *info;
-       int     baud = 38400;
-       int     bits = 8;
-       int     parity = 'n';
-       int     cflag = CREAD | HUPCL | CLOCAL;
-       int     brg;
-       char    *s;
-       long    flags;
-
-       /* Find out how many Z8530 SCCs we have */
-       if (zs_chain == 0)
-               probe_sccs();
-
-       if (zs_chain == 0)
-               return -1;
-
-       /* Do we have the device asked for? */
-       if (co->index >= zs_channels_found)
-               return -1;
-       info = zs_soft + co->index;
-
-       set_scc_power(info, 1);
-
-       /* Reset the channel */
-       write_zsreg(info->zs_channel, R9, CHRA);
-
-       if (options) {
-               baud = simple_strtoul(options, NULL, 10);
-               s = options;
-               while(*s >= '0' && *s <= '9')
-                       s++;
-               if (*s)
-                       parity = *s++;
-               if (*s)
-                       bits   = *s - '0';
-       }
-
-       /*
-        *      Now construct a cflag setting.
-        */
-       switch(baud) {
-       case 1200:
-               cflag |= B1200;
-               break;
-       case 2400:
-               cflag |= B2400;
-               break;
-       case 4800:
-               cflag |= B4800;
-               break;
-       case 9600:
-               cflag |= B9600;
-               break;
-       case 19200:
-               cflag |= B19200;
-               break;
-       case 57600:
-               cflag |= B57600;
-               break;
-       case 115200:
-               cflag |= B115200;
-               break;
-       case 38400:
-       default:
-               cflag |= B38400;
-               break;
-       }
-       switch(bits) {
-       case 7:
-               cflag |= CS7;
-               break;
-       default:
-       case 8:
-               cflag |= CS8;
-               break;
-       }
-       switch(parity) {
-       case 'o': case 'O':
-               cflag |= PARENB | PARODD;
-               break;
-       case 'e': case 'E':
-               cflag |= PARENB;
-               break;
-       }
-       co->cflag = cflag;
-
-       spin_lock_irqsave(&info->lock, flags);
-        memset(info->curregs, 0, sizeof(info->curregs));
-
-       info->zs_baud = baud;
-       info->clk_divisor = 16;
-       switch (info->zs_baud) {
-       case ZS_CLOCK/16:       /* 230400 */
-               info->curregs[4] = X16CLK;
-               info->curregs[11] = 0;
-               break;
-       case ZS_CLOCK/32:       /* 115200 */
-               info->curregs[4] = X32CLK;
-               info->curregs[11] = 0;
-               break;
-       default:
-               info->curregs[4] = X16CLK;
-               info->curregs[11] = TCBR | RCBR;
-               brg = BPS_TO_BRG(info->zs_baud, ZS_CLOCK/info->clk_divisor);
-               info->curregs[12] = (brg & 255);
-               info->curregs[13] = ((brg >> 8) & 255);
-               info->curregs[14] = BRENABL;
-       }
-
-       /* byte size and parity */
-       info->curregs[3] &= ~RxNBITS_MASK;
-       info->curregs[5] &= ~TxNBITS_MASK;
-       switch (cflag & CSIZE) {
-       case CS5:
-               info->curregs[3] |= Rx5;
-               info->curregs[5] |= Tx5;
-               break;
-       case CS6:
-               info->curregs[3] |= Rx6;
-               info->curregs[5] |= Tx6;
-               break;
-       case CS7:
-               info->curregs[3] |= Rx7;
-               info->curregs[5] |= Tx7;
-               break;
-       case CS8:
-       default: /* defaults to 8 bits */
-               info->curregs[3] |= Rx8;
-               info->curregs[5] |= Tx8;
-               break;
-       }
-        info->curregs[5] |= TxENAB | RTS | DTR;
-       info->pendregs[3] = info->curregs[3];
-       info->pendregs[5] = info->curregs[5];
-
-       info->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN);
-       if (cflag & CSTOPB) {
-               info->curregs[4] |= SB2;
-       } else {
-               info->curregs[4] |= SB1;
-       }
-       if (cflag & PARENB) {
-               info->curregs[4] |= PAR_ENA;
-               if (!(cflag & PARODD)) {
-                       info->curregs[4] |= PAR_EVEN;
-               }
-       }
-       info->pendregs[4] = info->curregs[4];
-
-       if (!(cflag & CLOCAL)) {
-               if (!(info->curregs[15] & DCDIE))
-                       info->read_reg_zero = read_zsreg(info->zs_channel, 0);
-               info->curregs[15] |= DCDIE;
-       } else
-               info->curregs[15] &= ~DCDIE;
-       if (cflag & CRTSCTS) {
-               info->curregs[15] |= CTSIE;
-               if ((read_zsreg(info->zs_channel, 0) & CTS) != 0)
-                       info->tx_stopped = 1;
-       } else {
-               info->curregs[15] &= ~CTSIE;
-               info->tx_stopped = 0;
-       }
-       info->pendregs[15] = info->curregs[15];
-
-       /* Load up the new values */
-       load_zsregs(info->zs_channel, info->curregs);
-
-       spin_unlock_irqrestore(&info->lock, flags);
-
-       return 0;
-}
-
-static struct console sercons = {
-       .name           = "ttyS",
-       .write          = serial_console_write,
-       .device         = serial_console_device,
-       .setup          = serial_console_setup,
-       .flags          = CON_PRINTBUFFER,
-       .index          = -1,
-};
-
-/*
- *     Register console.
- */
-static void __init mac_scc_console_init(void)
-{
-       register_console(&sercons);
-}
-console_initcall(mac_scc_console_init);
-
-#endif /* ifdef CONFIG_SERIAL_CONSOLE */
-
-#ifdef CONFIG_KGDB
-/* These are for receiving and sending characters under the kgdb
- * source level kernel debugger.
- */
-void putDebugChar(char kgdb_char)
-{
-       struct mac_zschannel *chan = zs_kgdbchan;
-       while ((read_zsreg(chan, 0) & Tx_BUF_EMP) == 0)
-               udelay(5);
-       write_zsdata(chan, kgdb_char);
-}
-
-char getDebugChar(void)
-{
-       struct mac_zschannel *chan = zs_kgdbchan;
-       while((read_zsreg(chan, 0) & Rx_CH_AV) == 0)
-               eieio(); /*barrier();*/
-       return read_zsdata(chan);
-}
-
-void kgdb_interruptible(int yes)
-{
-       struct mac_zschannel *chan = zs_kgdbchan;
-       int one, nine;
-       nine = read_zsreg(chan, 9);
-       if (yes == 1) {
-               one = EXT_INT_ENAB|INT_ALL_Rx;
-               nine |= MIE;
-               printk("turning serial ints on\n");
-       } else {
-               one = RxINT_DISAB;
-               nine &= ~MIE;
-               printk("turning serial ints off\n");
-       }
-       write_zsreg(chan, 1, one);
-       write_zsreg(chan, 9, nine);
-}
-
-/* This sets up the serial port we're using, and turns on
- * interrupts for that channel, so kgdb is usable once we're done.
- */
-static inline void kgdb_chaninit(struct mac_zschannel *ms, int intson, int bps)
-{
-       int brg;
-       int i, x;
-       volatile char *sccc = ms->control;
-       brg = BPS_TO_BRG(bps, ZS_CLOCK/16);
-       printk("setting bps on kgdb line to %d [brg=%x]\n", bps, brg);
-       for (i = 20000; i != 0; --i) {
-               x = *sccc; eieio();
-       }
-       for (i = 0; i < sizeof(scc_inittab); ++i) {
-               write_zsreg(ms, scc_inittab[i], scc_inittab[i+1]);
-               i++;
-       }
-}
-
-/* This is called at boot time to prime the kgdb serial debugging
- * serial line.  The 'tty_num' argument is 0 for /dev/ttya and 1
- * for /dev/ttyb which is determined in setup_arch() from the
- * boot command line flags.
- * XXX at the moment probably only channel A will work
- */
-void __init zs_kgdb_hook(int tty_num)
-{
-       /* Find out how many Z8530 SCCs we have */
-       if (zs_chain == 0)
-               probe_sccs();
-
-       set_scc_power(&zs_soft[tty_num], 1);
-
-       zs_kgdbchan = zs_soft[tty_num].zs_channel;
-       zs_soft[tty_num].change_needed = 0;
-       zs_soft[tty_num].clk_divisor = 16;
-       zs_soft[tty_num].zs_baud = 38400;
-       zs_soft[tty_num].kgdb_channel = 1;     /* This runs kgdb */
-
-       /* Turn on transmitter/receiver at 8-bits/char */
-        kgdb_chaninit(zs_soft[tty_num].zs_channel, 1, 38400);
-       printk("KGDB: on channel %d initialized\n", tty_num);
-       set_debug_traps(); /* init stub */
-}
-#endif /* ifdef CONFIG_KGDB */
-
-#ifdef CONFIG_PMAC_PBOOK
-/*
- * notify clients before sleep and reset bus afterwards
- */
-int
-serial_notify_sleep(struct pmu_sleep_notifier *self, int when)
-{
-       int i;
-
-       switch (when) {
-       case PBOOK_SLEEP_REQUEST:
-       case PBOOK_SLEEP_REJECT:
-               break;
-
-       case PBOOK_SLEEP_NOW:
-               for (i=0; i<zs_channels_found; i++) {
-                       struct mac_serial *info = &zs_soft[i];
-                       if (info->flags & ZILOG_INITIALIZED) {
-                               shutdown(info);
-                               info->flags |= ZILOG_SLEEPING;
-                       }
-               }
-               break;
-       case PBOOK_WAKE:
-               for (i=0; i<zs_channels_found; i++) {
-                       struct mac_serial *info = &zs_soft[i];
-                       if (info->flags & ZILOG_SLEEPING) {
-                               info->flags &= ~ZILOG_SLEEPING;
-                               startup(info);
-                       }
-               }
-               break;
-       }
-       return PBOOK_SLEEP_OK;
-}
-#endif /* CONFIG_PMAC_PBOOK */
diff --git a/drivers/macintosh/macserial.h b/drivers/macintosh/macserial.h
deleted file mode 100644 (file)
index bade11a..0000000
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- * macserial.h: Definitions for the Macintosh Z8530 serial driver.
- *
- * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
- *
- * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _MACSERIAL_H
-#define _MACSERIAL_H
-
-#include <linux/spinlock.h>
-
-#define NUM_ZSREGS    16
-
-struct serial_struct {
-       int     type;
-       int     line;
-       int     port;
-       int     irq;
-       int     flags;
-       int     xmit_fifo_size;
-       int     custom_divisor;
-       int     baud_base;
-       unsigned short  close_delay;
-       char    reserved_char[2];
-       int     hub6;
-       unsigned short  closing_wait; /* time to wait before closing */
-       unsigned short  closing_wait2; /* no longer used... */
-       int     reserved[4];
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define ZILOG_CLOSING_WAIT_INF 0
-#define ZILOG_CLOSING_WAIT_NONE        65535
-
-/*
- * Definitions for ZILOG_struct (and serial_struct) flags field
- */
-#define ZILOG_HUP_NOTIFY       0x0001  /* Notify getty on hangups and closes 
-                                        * on the callout port */
-#define ZILOG_FOURPORT                 0x0002  /* Set OU1, OUT2 per AST Fourport settings */
-#define ZILOG_SAK              0x0004  /* Secure Attention Key (Orange book) */
-#define ZILOG_SPLIT_TERMIOS    0x0008  /* Separate termios for dialin/callout */
-
-#define ZILOG_SPD_MASK         0x0030
-#define ZILOG_SPD_HI           0x0010  /* Use 56000 instead of 38400 bps */
-
-#define ZILOG_SPD_VHI          0x0020  /* Use 115200 instead of 38400 bps */
-#define ZILOG_SPD_CUST         0x0030  /* Use user-specified divisor */
-
-#define ZILOG_SKIP_TEST                0x0040  /* Skip UART test during autoconfiguration */
-#define ZILOG_AUTO_IRQ                 0x0080  /* Do automatic IRQ during autoconfiguration */
-#define ZILOG_SESSION_LOCKOUT  0x0100  /* Lock out cua opens based on session */
-#define ZILOG_PGRP_LOCKOUT     0x0200  /* Lock out cua opens based on pgrp */
-#define ZILOG_CALLOUT_NOHUP    0x0400  /* Don't do hangups for cua device */
-
-#define ZILOG_FLAGS            0x0FFF  /* Possible legal ZILOG flags */
-#define ZILOG_USR_MASK         0x0430  /* Legal flags that non-privileged
-                                        * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ZILOG_INITIALIZED      0x80000000 /* Serial port was initialized */
-#define ZILOG_CALLOUT_ACTIVE   0x40000000 /* Call out device is active */
-#define ZILOG_NORMAL_ACTIVE    0x20000000 /* Normal device is active */
-#define ZILOG_BOOT_AUTOCONF    0x10000000 /* Autoconfigure port on bootup */
-#define ZILOG_CLOSING          0x08000000 /* Serial port is closing */
-#define ZILOG_CTS_FLOW         0x04000000 /* Do CTS flow control */
-#define ZILOG_CHECK_CD         0x02000000 /* i.e., CLOCAL */
-#define ZILOG_SLEEPING         0x01000000 /* have shut it down for sleep */
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct mac_serial;
-
-struct mac_zschannel {
-       volatile unsigned char* control;
-       volatile unsigned char* data;
-       spinlock_t              lock;
-       /* Used for debugging */
-       struct mac_serial*      parent;
-};
-
-struct mac_dma {
-       volatile struct dbdma_regs      dma;
-       volatile unsigned short         res_count;
-       volatile unsigned short         command;
-       volatile unsigned int           buf_addr;
-};
-
-struct mac_serial {
-       struct mac_serial *zs_next;     /* For IRQ servicing chain */
-       struct mac_zschannel *zs_channel; /* Channel registers */
-       struct mac_zschannel *zs_chan_a;        /* A side registers */
-       unsigned char read_reg_zero;
-       struct device_node* dev_node;
-       spinlock_t lock;
-
-       char soft_carrier;  /* Use soft carrier on this channel */
-       char break_abort;   /* Is serial console in, so process brk/abrt */
-       char kgdb_channel;  /* Kgdb is running on this channel */
-       char is_cons;       /* Is this our console. */
-       char is_internal_modem; /* is connected to an internal modem */
-       char is_irda;           /* is connected to an IrDA codec */
-       int port_type;          /* Port type for pmac_feature */
-       unsigned char tx_active; /* character is being xmitted */
-       unsigned char tx_stopped; /* output is suspended */
-       unsigned char power_wait; /* waiting for power-up delay to expire */
-
-       /* We need to know the current clock divisor
-        * to read the bps rate the chip has currently
-        * loaded.
-        */
-       unsigned char clk_divisor;  /* May be 1, 16, 32, or 64 */
-       int zs_baud;
-
-       /* Current write register values */
-       unsigned char curregs[NUM_ZSREGS];
-
-       /* Values we need to set next opportunity */
-       unsigned char pendregs[NUM_ZSREGS];
-
-       char change_needed;
-
-       int                     magic;
-       int                     baud_base;
-       int                     port;
-       int                     irq;
-       int                     flags;          /* defined in tty.h */
-       int                     type;           /* UART type */
-       struct tty_struct       *tty;
-       int                     read_status_mask;
-       int                     ignore_status_mask;
-       int                     timeout;
-       int                     xmit_fifo_size;
-       int                     custom_divisor;
-       int                     x_char; /* xon/xoff character */
-       int                     close_delay;
-       unsigned short          closing_wait;
-       unsigned short          closing_wait2;
-       unsigned long           event;
-       unsigned long           last_active;
-       int                     line;
-       int                     count;      /* # of fd on device */
-       int                     blocked_open; /* # of blocked opens */
-       unsigned char           *xmit_buf;
-       int                     xmit_head;
-       int                     xmit_tail;
-       int                     xmit_cnt;
-       struct work_struct      tqueue;
-       wait_queue_head_t       open_wait;
-       wait_queue_head_t       close_wait;
-
-       volatile struct dbdma_regs *tx_dma;
-       int                     tx_dma_irq;
-       volatile struct dbdma_cmd *tx_cmds;
-       volatile struct mac_dma *rx;
-       int                     rx_dma_irq;
-       volatile struct dbdma_cmd **rx_cmds;
-       unsigned char           **rx_char_buf;
-       unsigned char           **rx_flag_buf;
-#define        RX_BUF_SIZE     256
-       int                     rx_nbuf;
-       int                     rx_done_bytes;
-       int                     rx_ubuf;
-       int                     rx_fbuf;
-#define        RX_NO_FBUF      (-1)
-       int                     rx_cbuf;
-       spinlock_t              rx_dma_lock;
-       int                     has_dma;
-       int                     dma_initted;
-       void                    *dma_priv;
-       struct timer_list       poll_dma_timer;
-#define RX_DMA_TIMER   (jiffies + 10*HZ/1000)
-
-       struct timer_list       powerup_timer;
-};
-
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE 4096
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP  0
-
-#endif /* __KERNEL__ */
-
-/* Conversion routines to/from brg time constants from/to bits
- * per second.
- */
-#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
-#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
-
-/* The Zilog register set */
-
-#define        FLAG    0x7e
-
-/* Write Register 0 */
-#define        R0      0               /* Register selects */
-#define        R1      1
-#define        R2      2
-#define        R3      3
-#define        R4      4
-#define        R5      5
-#define        R6      6
-#define        R7      7
-#define        R8      8
-#define        R9      9
-#define        R10     10
-#define        R11     11
-#define        R12     12
-#define        R13     13
-#define        R14     14
-#define        R15     15
-
-#define        NULLCODE        0       /* Null Code */
-#define        POINT_HIGH      0x8     /* Select upper half of registers */
-#define        RES_EXT_INT     0x10    /* Reset Ext. Status Interrupts */
-#define        SEND_ABORT      0x18    /* HDLC Abort */
-#define        RES_RxINT_FC    0x20    /* Reset RxINT on First Character */
-#define        RES_Tx_P        0x28    /* Reset TxINT Pending */
-#define        ERR_RES         0x30    /* Error Reset */
-#define        RES_H_IUS       0x38    /* Reset highest IUS */
-
-#define        RES_Rx_CRC      0x40    /* Reset Rx CRC Checker */
-#define        RES_Tx_CRC      0x80    /* Reset Tx CRC Checker */
-#define        RES_EOM_L       0xC0    /* Reset EOM latch */
-
-/* Write Register 1 */
-
-#define        EXT_INT_ENAB    0x1     /* Ext Int Enable */
-#define        TxINT_ENAB      0x2     /* Tx Int Enable */
-#define        PAR_SPEC        0x4     /* Parity is special condition */
-
-#define        RxINT_DISAB     0       /* Rx Int Disable */
-#define        RxINT_FCERR     0x8     /* Rx Int on First Character Only or Error */
-#define        INT_ALL_Rx      0x10    /* Int on all Rx Characters or error */
-#define        INT_ERR_Rx      0x18    /* Int on error only */
-
-#define        WT_RDY_RT       0x20    /* W/Req reflects recv if 1, xmit if 0 */
-#define        WT_FN_RDYFN     0x40    /* W/Req pin is DMA request if 1, wait if 0 */
-#define        WT_RDY_ENAB     0x80    /* Enable W/Req pin */
-
-/* Write Register #2 (Interrupt Vector) */
-
-/* Write Register 3 */
-
-#define        RxENABLE        0x1     /* Rx Enable */
-#define        SYNC_L_INH      0x2     /* Sync Character Load Inhibit */
-#define        ADD_SM          0x4     /* Address Search Mode (SDLC) */
-#define        RxCRC_ENAB      0x8     /* Rx CRC Enable */
-#define        ENT_HM          0x10    /* Enter Hunt Mode */
-#define        AUTO_ENAB       0x20    /* Auto Enables */
-#define        Rx5             0x0     /* Rx 5 Bits/Character */
-#define        Rx7             0x40    /* Rx 7 Bits/Character */
-#define        Rx6             0x80    /* Rx 6 Bits/Character */
-#define        Rx8             0xc0    /* Rx 8 Bits/Character */
-#define RxNBITS_MASK   0xc0
-
-/* Write Register 4 */
-
-#define        PAR_ENA         0x1     /* Parity Enable */
-#define        PAR_EVEN        0x2     /* Parity Even/Odd* */
-
-#define        SYNC_ENAB       0       /* Sync Modes Enable */
-#define        SB1             0x4     /* 1 stop bit/char */
-#define        SB15            0x8     /* 1.5 stop bits/char */
-#define        SB2             0xc     /* 2 stop bits/char */
-#define SB_MASK                0xc
-
-#define        MONSYNC         0       /* 8 Bit Sync character */
-#define        BISYNC          0x10    /* 16 bit sync character */
-#define        SDLC            0x20    /* SDLC Mode (01111110 Sync Flag) */
-#define        EXTSYNC         0x30    /* External Sync Mode */
-
-#define        X1CLK           0x0     /* x1 clock mode */
-#define        X16CLK          0x40    /* x16 clock mode */
-#define        X32CLK          0x80    /* x32 clock mode */
-#define        X64CLK          0xC0    /* x64 clock mode */
-#define XCLK_MASK      0xC0
-
-/* Write Register 5 */
-
-#define        TxCRC_ENAB      0x1     /* Tx CRC Enable */
-#define        RTS             0x2     /* RTS */
-#define        SDLC_CRC        0x4     /* SDLC/CRC-16 */
-#define        TxENAB          0x8     /* Tx Enable */
-#define        SND_BRK         0x10    /* Send Break */
-#define        Tx5             0x0     /* Tx 5 bits (or less)/character */
-#define        Tx7             0x20    /* Tx 7 bits/character */
-#define        Tx6             0x40    /* Tx 6 bits/character */
-#define        Tx8             0x60    /* Tx 8 bits/character */
-#define TxNBITS_MASK   0x60
-#define        DTR             0x80    /* DTR */
-
-/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
-
-/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
-
-/* Write Register 7' (Some enhanced feature control) */
-#define        ENEXREAD        0x40    /* Enable read of some write registers */
-
-/* Write Register 8 (transmit buffer) */
-
-/* Write Register 9 (Master interrupt control) */
-#define        VIS     1       /* Vector Includes Status */
-#define        NV      2       /* No Vector */
-#define        DLC     4       /* Disable Lower Chain */
-#define        MIE     8       /* Master Interrupt Enable */
-#define        STATHI  0x10    /* Status high */
-#define        NORESET 0       /* No reset on write to R9 */
-#define        CHRB    0x40    /* Reset channel B */
-#define        CHRA    0x80    /* Reset channel A */
-#define        FHWRES  0xc0    /* Force hardware reset */
-
-/* Write Register 10 (misc control bits) */
-#define        BIT6    1       /* 6 bit/8bit sync */
-#define        LOOPMODE 2      /* SDLC Loop mode */
-#define        ABUNDER 4       /* Abort/flag on SDLC xmit underrun */
-#define        MARKIDLE 8      /* Mark/flag on idle */
-#define        GAOP    0x10    /* Go active on poll */
-#define        NRZ     0       /* NRZ mode */
-#define        NRZI    0x20    /* NRZI mode */
-#define        FM1     0x40    /* FM1 (transition = 1) */
-#define        FM0     0x60    /* FM0 (transition = 0) */
-#define        CRCPS   0x80    /* CRC Preset I/O */
-
-/* Write Register 11 (Clock Mode control) */
-#define        TRxCXT  0       /* TRxC = Xtal output */
-#define        TRxCTC  1       /* TRxC = Transmit clock */
-#define        TRxCBR  2       /* TRxC = BR Generator Output */
-#define        TRxCDP  3       /* TRxC = DPLL output */
-#define        TRxCOI  4       /* TRxC O/I */
-#define        TCRTxCP 0       /* Transmit clock = RTxC pin */
-#define        TCTRxCP 8       /* Transmit clock = TRxC pin */
-#define        TCBR    0x10    /* Transmit clock = BR Generator output */
-#define        TCDPLL  0x18    /* Transmit clock = DPLL output */
-#define        RCRTxCP 0       /* Receive clock = RTxC pin */
-#define        RCTRxCP 0x20    /* Receive clock = TRxC pin */
-#define        RCBR    0x40    /* Receive clock = BR Generator output */
-#define        RCDPLL  0x60    /* Receive clock = DPLL output */
-#define        RTxCX   0x80    /* RTxC Xtal/No Xtal */
-
-/* Write Register 12 (lower byte of baud rate generator time constant) */
-
-/* Write Register 13 (upper byte of baud rate generator time constant) */
-
-/* Write Register 14 (Misc control bits) */
-#define        BRENABL 1       /* Baud rate generator enable */
-#define        BRSRC   2       /* Baud rate generator source */
-#define        DTRREQ  4       /* DTR/Request function */
-#define        AUTOECHO 8      /* Auto Echo */
-#define        LOOPBAK 0x10    /* Local loopback */
-#define        SEARCH  0x20    /* Enter search mode */
-#define        RMC     0x40    /* Reset missing clock */
-#define        DISDPLL 0x60    /* Disable DPLL */
-#define        SSBR    0x80    /* Set DPLL source = BR generator */
-#define        SSRTxC  0xa0    /* Set DPLL source = RTxC */
-#define        SFMM    0xc0    /* Set FM mode */
-#define        SNRZI   0xe0    /* Set NRZI mode */
-
-/* Write Register 15 (external/status interrupt control) */
-#define        EN85C30 1       /* Enable some 85c30-enhanced registers */
-#define        ZCIE    2       /* Zero count IE */
-#define        ENSTFIFO 4      /* Enable status FIFO (SDLC) */
-#define        DCDIE   8       /* DCD IE */
-#define        SYNCIE  0x10    /* Sync/hunt IE */
-#define        CTSIE   0x20    /* CTS IE */
-#define        TxUIE   0x40    /* Tx Underrun/EOM IE */
-#define        BRKIE   0x80    /* Break/Abort IE */
-
-
-/* Read Register 0 */
-#define        Rx_CH_AV        0x1     /* Rx Character Available */
-#define        ZCOUNT          0x2     /* Zero count */
-#define        Tx_BUF_EMP      0x4     /* Tx Buffer empty */
-#define        DCD             0x8     /* DCD */
-#define        SYNC_HUNT       0x10    /* Sync/hunt */
-#define        CTS             0x20    /* CTS */
-#define        TxEOM           0x40    /* Tx underrun */
-#define        BRK_ABRT        0x80    /* Break/Abort */
-
-/* Read Register 1 */
-#define        ALL_SNT         0x1     /* All sent */
-/* Residue Data for 8 Rx bits/char programmed */
-#define        RES3            0x8     /* 0/3 */
-#define        RES4            0x4     /* 0/4 */
-#define        RES5            0xc     /* 0/5 */
-#define        RES6            0x2     /* 0/6 */
-#define        RES7            0xa     /* 0/7 */
-#define        RES8            0x6     /* 0/8 */
-#define        RES18           0xe     /* 1/8 */
-#define        RES28           0x0     /* 2/8 */
-/* Special Rx Condition Interrupts */
-#define        PAR_ERR         0x10    /* Parity error */
-#define        Rx_OVR          0x20    /* Rx Overrun Error */
-#define        FRM_ERR         0x40    /* CRC/Framing Error */
-#define        END_FR          0x80    /* End of Frame (SDLC) */
-
-/* Read Register 2 (channel b only) - Interrupt vector */
-#define        CHB_Tx_EMPTY    0x00
-#define        CHB_EXT_STAT    0x02
-#define        CHB_Rx_AVAIL    0x04
-#define        CHB_SPECIAL     0x06
-#define        CHA_Tx_EMPTY    0x08
-#define        CHA_EXT_STAT    0x0a
-#define        CHA_Rx_AVAIL    0x0c
-#define        CHA_SPECIAL     0x0e
-#define        STATUS_MASK     0x06
-
-/* Read Register 3 (interrupt pending register) ch a only */
-#define        CHBEXT  0x1             /* Channel B Ext/Stat IP */
-#define        CHBTxIP 0x2             /* Channel B Tx IP */
-#define        CHBRxIP 0x4             /* Channel B Rx IP */
-#define        CHAEXT  0x8             /* Channel A Ext/Stat IP */
-#define        CHATxIP 0x10            /* Channel A Tx IP */
-#define        CHARxIP 0x20            /* Channel A Rx IP */
-
-/* Read Register 8 (receive data register) */
-
-/* Read Register 10  (misc status bits) */
-#define        ONLOOP  2               /* On loop */
-#define        LOOPSEND 0x10           /* Loop sending */
-#define        CLK2MIS 0x40            /* Two clocks missing */
-#define        CLK1MIS 0x80            /* One clock missing */
-
-/* Read Register 12 (lower byte of baud rate generator constant) */
-
-/* Read Register 13 (upper byte of baud rate generator constant) */
-
-/* Read Register 15 (value of WR 15) */
-
-/* Misc macros */
-#define ZS_CLEARERR(channel)    (write_zsreg(channel, 0, ERR_RES))
-#define ZS_CLEARFIFO(channel)   do { volatile unsigned char garbage; \
-                                    garbage = read_zsdata(channel); \
-                                    garbage = read_zsdata(channel); \
-                                    garbage = read_zsdata(channel); \
-                               } while(0)
-
-#endif /* !(_MACSERIAL_H) */