[SCSI] qla1280: driver clean up
authorMichael Reed <mdr@sgi.com>
Wed, 8 Apr 2009 19:33:48 +0000 (14:33 -0500)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Wed, 20 May 2009 22:21:13 +0000 (17:21 -0500)
Remove some unneeded, inactive and unused code, make some trivial
corrections to comments and a printk, and return a proper status
in qla1280_queuecommand.  No fundamental logic changes are made.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/qla1280.c

index 5defe5ea5eda64937f605ebd6dceae3d6958c76f..0cbad4982db99b11bdb63f44f006bcc7f026432f 100644 (file)
@@ -435,7 +435,6 @@ static int qla1280_mailbox_command(struct scsi_qla_host *,
                                   uint8_t, uint16_t *);
 static int qla1280_bus_reset(struct scsi_qla_host *, int);
 static int qla1280_device_reset(struct scsi_qla_host *, int, int);
-static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
 static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
 static int qla1280_abort_isp(struct scsi_qla_host *);
 #ifdef QLA_64BIT_PTR
@@ -698,7 +697,7 @@ qla1280_info(struct Scsi_Host *host)
 }
 
 /**************************************************************************
- *   qla1200_queuecommand
+ *   qla1280_queuecommand
  *     Queue a command to the controller.
  *
  * Note:
@@ -713,7 +712,7 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 {
        struct Scsi_Host *host = cmd->device->host;
        struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-       struct srb *sp = (struct srb *)&cmd->SCp;
+       struct srb *sp = (struct srb *)CMD_SP(cmd);
        int status;
 
        cmd->scsi_done = fn;
@@ -738,11 +737,9 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 
 enum action {
        ABORT_COMMAND,
-       ABORT_DEVICE,
        DEVICE_RESET,
        BUS_RESET,
        ADAPTER_RESET,
-       FAIL
 };
 
 /* timer action for error action processor */
@@ -768,7 +765,7 @@ static void qla1280_mailbox_timeout(unsigned long __data)
 }
 
 /**************************************************************************
- * qla1200_error_action
+ * qla1280_error_action
  *    The function will attempt to perform a specified error action and
  *    wait for the results (or time out).
  *
@@ -798,6 +795,8 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
        DECLARE_COMPLETION_ONSTACK(wait);
        struct timer_list timer;
 
+       ENTER("qla1280_error_action");
+
        ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
 
        dprintk(4, "error_action %i, istatus 0x%04x\n", action,
@@ -807,20 +806,11 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
                RD_REG_WORD(&ha->iobase->host_cmd),
                RD_REG_WORD(&ha->iobase->ictrl), jiffies);
 
-       ENTER("qla1280_error_action");
        if (qla1280_verbose)
                printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
                       "Handle=0x%p, action=0x%x\n",
                       ha->host_no, cmd, CMD_HANDLE(cmd), action);
 
-       if (cmd == NULL) {
-               printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
-                      "si_Cmnd pointer, failing.\n");
-               LEAVE("qla1280_error_action");
-               return FAILED;
-       }
-
-       ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
        sp = (struct srb *)CMD_SP(cmd);
        handle = CMD_HANDLE(cmd);
 
@@ -857,9 +847,6 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
         * mean the actual success or fail of the action */
        result = FAILED;
        switch (action) {
-       case FAIL:
-               break;
-
        case ABORT_COMMAND:
                if ((sp->flags & SRB_ABORT_PENDING)) {
                        printk(KERN_WARNING
@@ -893,15 +880,6 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
                }
                break;
 
-       case ABORT_DEVICE:
-               if (qla1280_verbose)
-                       printk(KERN_INFO
-                              "scsi(%ld:%d:%d:%d): Queueing abort device "
-                              "command.\n", ha->host_no, bus, target, lun);
-               if (qla1280_abort_device(ha, bus, target, lun) == 0)
-                       result = SUCCESS;
-               break;
-
        case DEVICE_RESET:
                if (qla1280_verbose)
                        printk(KERN_INFO
@@ -1285,8 +1263,6 @@ qla1280_done(struct scsi_qla_host *ha)
                case DID_ABORT:
                        sp->flags &= ~SRB_ABORT_PENDING;
                        sp->flags |= SRB_ABORTED;
-                       if (sp->flags & SRB_TIMEOUT)
-                               CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
                        break;
                default:
                        break;
@@ -2417,9 +2393,6 @@ static int
 qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
 {
        struct device_reg __iomem *reg = ha->iobase;
-#if 0
-       LIST_HEAD(done_q);
-#endif
        int status = 0;
        int cnt;
        uint16_t *optr, *iptr;
@@ -2493,19 +2466,9 @@ qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
        mr = MAILBOX_REGISTER_COUNT;
        memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
 
-#if 0
-       /* Go check for any response interrupts pending. */
-       qla1280_isr(ha, &done_q);
-#endif
-
        if (ha->flags.reset_marker)
                qla1280_rst_aen(ha);
 
-#if 0
-       if (!list_empty(&done_q))
-               qla1280_done(ha, &done_q);
-#endif
-
        if (status)
                dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
                        "0x%x ****\n", mb[0]);
@@ -2640,41 +2603,6 @@ qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
        return status;
 }
 
-/*
- * qla1280_abort_device
- *      Issue an abort message to the device
- *
- * Input:
- *      ha     = adapter block pointer.
- *      bus    = SCSI BUS.
- *      target = SCSI ID.
- *      lun    = SCSI LUN.
- *
- * Returns:
- *      0 = success
- */
-static int
-qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
-{
-       uint16_t mb[MAILBOX_REGISTER_COUNT];
-       int status;
-
-       ENTER("qla1280_abort_device");
-
-       mb[0] = MBC_ABORT_DEVICE;
-       mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
-       status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
-
-       /* Issue marker command. */
-       qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
-
-       if (status)
-               dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
-
-       LEAVE("qla1280_abort_device");
-       return status;
-}
-
 /*
  * qla1280_abort_command
  *      Abort command aborts a specified IOCB.
@@ -2833,7 +2761,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
        /* If room for request in request ring. */
        if ((req_cnt + 2) >= ha->req_q_cnt) {
-               status = 1;
+               status = SCSI_MLQUEUE_HOST_BUSY;
                dprintk(2, "qla1280_start_scsi: in-ptr=0x%x  req_q_cnt="
                        "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
                        req_cnt);
@@ -2845,7 +2773,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
                     ha->outstanding_cmds[cnt] != NULL; cnt++);
 
        if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-               status = 1;
+               status = SCSI_MLQUEUE_HOST_BUSY;
                dprintk(2, "qla1280_start_scsi: NO ROOM IN "
                        "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
                goto out;
@@ -3108,7 +3036,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
                ha->req_q_cnt, seg_cnt);
        /* If room for request in request ring. */
        if ((req_cnt + 2) >= ha->req_q_cnt) {
-               status = 1;
+               status = SCSI_MLQUEUE_HOST_BUSY;
                dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
                        "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
                        ha->req_q_cnt, req_cnt);
@@ -3120,7 +3048,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
                     (ha->outstanding_cmds[cnt] != 0); cnt++) ;
 
        if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-               status = 1;
+               status = SCSI_MLQUEUE_HOST_BUSY;
                dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
                        "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
                goto out;
@@ -3495,7 +3423,7 @@ qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
                                         * If we get here we have a real problem!
                                         */
                                        printk(KERN_WARNING
-                                              "qla1280: ISP invalid handle");
+                                              "qla1280: ISP invalid handle\n");
                                }
                        }
                        break;
@@ -3955,13 +3883,6 @@ qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
 
                if (scsi_control == SCSI_PHASE_INVALID) {
                        ha->bus_settings[bus].scsi_bus_dead = 1;
-#if 0
-                       CMD_RESULT(cp) = DID_NO_CONNECT << 16;
-                       CMD_HANDLE(cp) = INVALID_HANDLE;
-                       /* ha->actthreads--; */
-
-                       (*(cp)->scsi_done)(cp);
-#endif
                        return 1;       /* bus is dead */
                } else {
                        ha->bus_settings[bus].scsi_bus_dead = 0;