=====================
Supported chips:
+ * Linear Technology LTC2974
+ Prefix: 'ltc2974'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc2974
* Linear Technology LTC2978
Prefix: 'ltc2978'
Addresses scanned: -
Prefix: 'ltc3880'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3880
+ * Linear Technology LTC3883
+ Prefix: 'ltc3883'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3883
Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-The LTC2978 is an octal power supply monitor, supervisor, sequencer and
-margin controller. The LTC3880 is a dual, PolyPhase DC/DC synchronous
-step-down switching regulator controller.
+LTC2974 is a quad digital power supply manager. LTC2978 is an octal power supply
+monitor. LTC3880 is a dual output poly-phase step-down DC/DC controller. LTC3883
+is a single phase step-down DC/DC controller.
Usage Notes
in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
-in1_max Maximum input voltage. LTC2978 only.
-in1_lcrit Critical minimum input voltage. LTC2978 only.
+in1_max Maximum input voltage. LTC2974 and LTC2978 only.
+in1_lcrit Critical minimum input voltage. LTC2974 and LTC2978
+ only.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
-in1_max_alarm Input voltage high alarm. LTC2978 only.
-in1_lcrit_alarm Input voltage critical low alarm. LTC2978 only.
+in1_max_alarm Input voltage high alarm. LTC2974 and LTC2978 only.
+in1_lcrit_alarm Input voltage critical low alarm. LTC2974 and LTC2978
+ only.
in1_crit_alarm Input voltage critical high alarm.
-in1_lowest Lowest input voltage. LTC2978 only.
+in1_lowest Lowest input voltage. LTC2974 and LTC2978 only.
in1_highest Highest input voltage.
in1_reset_history Reset input voltage history.
-in[2-9]_label "vout[1-8]". Channels 3 to 9 on LTC2978 only.
-in[2-9]_input Measured output voltage.
-in[2-9]_min Minimum output voltage.
-in[2-9]_max Maximum output voltage.
-in[2-9]_lcrit Critical minimum output voltage.
-in[2-9]_crit Critical maximum output voltage.
-in[2-9]_min_alarm Output voltage low alarm.
-in[2-9]_max_alarm Output voltage high alarm.
-in[2-9]_lcrit_alarm Output voltage critical low alarm.
-in[2-9]_crit_alarm Output voltage critical high alarm.
-in[2-9]_lowest Lowest output voltage. LTC2978 only.
-in[2-9]_highest Lowest output voltage.
-in[2-9]_reset_history Reset output voltage history.
-
-temp[1-3]_input Measured temperature.
+in[N]_label "vout[1-8]".
+ LTC2974: N=2-5
+ LTC2978: N=2-9
+ LTC3880: N=2-3
+ LTC3883: N=2
+in[N]_input Measured output voltage.
+in[N]_min Minimum output voltage.
+in[N]_max Maximum output voltage.
+in[N]_lcrit Critical minimum output voltage.
+in[N]_crit Critical maximum output voltage.
+in[N]_min_alarm Output voltage low alarm.
+in[N]_max_alarm Output voltage high alarm.
+in[N]_lcrit_alarm Output voltage critical low alarm.
+in[N]_crit_alarm Output voltage critical high alarm.
+in[N]_lowest Lowest output voltage. LTC2974 and LTC2978 only.
+in[N]_highest Highest output voltage.
+in[N]_reset_history Reset output voltage history.
+
+temp[N]_input Measured temperature.
+ On LTC2974, temp[1-4] report external temperatures,
+ and temp5 reports the chip temperature.
On LTC2978, only one temperature measurement is
supported and reports the chip temperature.
On LTC3880, temp1 and temp2 report external
- temperatures, and temp3 reports the chip
- temperature.
-temp[1-3]_min Mimimum temperature. LTC2978 only.
-temp[1-3]_max Maximum temperature.
-temp[1-3]_lcrit Critical low temperature.
-temp[1-3]_crit Critical high temperature.
-temp[1-3]_min_alarm Temperature low alarm. LTC2978 only.
-temp[1-3]_max_alarm Temperature high alarm.
-temp[1-3]_lcrit_alarm Temperature critical low alarm.
-temp[1-3]_crit_alarm Temperature critical high alarm.
-temp[1-3]_lowest Lowest measured temperature. LTC2978 only.
-temp[1-3]_highest Highest measured temperature.
-temp[1-3]_reset_history Reset temperature history.
-
-power[1-2]_label "pout[1-2]". LTC3880 only.
-power[1-2]_input Measured power.
-
-curr1_label "iin". LTC3880 only.
+ temperatures, and temp3 reports the chip temperature.
+ On LTC3883, temp1 reports an external temperature,
+ and temp2 reports the chip temperature.
+temp[N]_min Mimimum temperature. LTC2974 and LTC2978 only.
+temp[N]_max Maximum temperature.
+temp[N]_lcrit Critical low temperature.
+temp[N]_crit Critical high temperature.
+temp[N]_min_alarm Temperature low alarm. LTC2974 and LTC2978 only.
+temp[N]_max_alarm Temperature high alarm.
+temp[N]_lcrit_alarm Temperature critical low alarm.
+temp[N]_crit_alarm Temperature critical high alarm.
+temp[N]_lowest Lowest measured temperature. LTC2974 and LTC2978 only.
+ Not supported for chip temperature sensor on LTC2974.
+temp[N]_highest Highest measured temperature. Not supported for chip
+ temperature sensor on LTC2974.
+temp[N]_reset_history Reset temperature history. Not supported for chip
+ temperature sensor on LTC2974.
+
+power1_label "pin". LTC3883 only.
+power1_input Measured input power.
+
+power[N]_label "pout[1-4]".
+ LTC2974: N=1-4
+ LTC2978: Not supported
+ LTC3880: N=1-2
+ LTC3883: N=2
+power[N]_input Measured output power.
+
+curr1_label "iin". LTC3880 and LTC3883 only.
curr1_input Measured input current.
curr1_max Maximum input current.
curr1_max_alarm Input current high alarm.
-
-curr[2-3]_label "iout[1-2]". LTC3880 only.
-curr[2-3]_input Measured output current.
-curr[2-3]_max Maximum output current.
-curr[2-3]_crit Critical output current.
-curr[2-3]_max_alarm Output current high alarm.
-curr[2-3]_crit_alarm Output current critical high alarm.
+curr1_highest Highest input current. LTC3883 only.
+curr1_reset_history Reset input current history. LTC3883 only.
+
+curr[N]_label "iout[1-4]".
+ LTC2974: N=1-4
+ LTC2978: not supported
+ LTC3880: N=2-3
+ LTC3883: N=2
+curr[N]_input Measured output current.
+curr[N]_max Maximum output current.
+curr[N]_crit Critical high output current.
+curr[N]_lcrit Critical low output current. LTC2974 only.
+curr[N]_max_alarm Output current high alarm.
+curr[N]_crit_alarm Output current critical high alarm.
+curr[N]_lcrit_alarm Output current critical low alarm. LTC2974 only.
+curr[N]_lowest Lowest output current. LTC2974 only.
+curr[N]_highest Highest output current.
+curr[N]_reset_history Reset output current history.
/*
- * Hardware monitoring driver for LTC2978 and LTC3880
+ * Hardware monitoring driver for LTC2974, LTC2978, LTC3880, and LTC3883
*
* Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2013 Guenter Roeck
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/i2c.h>
#include "pmbus.h"
-enum chips { ltc2978, ltc3880 };
+enum chips { ltc2974, ltc2978, ltc3880, ltc3883 };
-/* LTC2978 and LTC3880 */
+/* Common for all chips */
#define LTC2978_MFR_VOUT_PEAK 0xdd
#define LTC2978_MFR_VIN_PEAK 0xde
#define LTC2978_MFR_TEMPERATURE_PEAK 0xdf
#define LTC2978_MFR_SPECIAL_ID 0xe7
-/* LTC2978 only */
+/* LTC2974 and LTC2978 */
#define LTC2978_MFR_VOUT_MIN 0xfb
#define LTC2978_MFR_VIN_MIN 0xfc
#define LTC2978_MFR_TEMPERATURE_MIN 0xfd
-/* LTC3880 only */
+/* LTC2974 only */
+#define LTC2974_MFR_IOUT_PEAK 0xd7
+#define LTC2974_MFR_IOUT_MIN 0xd8
+
+/* LTC3880 and LTC3883 */
#define LTC3880_MFR_IOUT_PEAK 0xd7
#define LTC3880_MFR_CLEAR_PEAKS 0xe3
#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
+/* LTC3883 only */
+#define LTC3883_MFR_IIN_PEAK 0xe1
+
+#define LTC2974_ID 0x0212
#define LTC2978_ID_REV1 0x0121
#define LTC2978_ID_REV2 0x0122
#define LTC3880_ID 0x4000
#define LTC3880_ID_MASK 0xff00
+#define LTC3883_ID 0x4300
+#define LTC3883_ID_MASK 0xff00
+#define LTC2974_NUM_PAGES 4
#define LTC2978_NUM_PAGES 8
#define LTC3880_NUM_PAGES 2
+#define LTC3883_NUM_PAGES 1
/*
* LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
struct ltc2978_data {
enum chips id;
u16 vin_min, vin_max;
- u16 temp_min, temp_max[LTC3880_NUM_PAGES];
+ u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES];
u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES];
- u16 iout_max[LTC3880_NUM_PAGES];
+ u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES];
+ u16 iin_max;
u16 temp2_max;
struct pmbus_driver_info info;
};
LTC2978_MFR_TEMPERATURE_MIN);
if (ret >= 0) {
if (lin11_to_val(ret)
- < lin11_to_val(data->temp_min))
- data->temp_min = ret;
- ret = data->temp_min;
+ < lin11_to_val(data->temp_min[page]))
+ data->temp_min[page] = ret;
+ ret = data->temp_min[page];
}
break;
case PMBUS_VIRT_READ_IOUT_MAX:
return ret;
}
+static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->iout_max[page]))
+ data->iout_max[page] = ret;
+ ret = data->iout_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_IOUT_MIN:
+ ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_MIN);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ < lin11_to_val(data->iout_min[page]))
+ data->iout_min[page] = ret;
+ ret = data->iout_min[page];
+ }
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc2978_read_word_data(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
return ret;
}
+static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IIN_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3883_MFR_IIN_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->iin_max))
+ data->iin_max = ret;
+ ret = data->iin_max;
+ }
+ break;
+ case PMBUS_VIRT_RESET_IIN_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc3880_read_word_data(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
static int ltc2978_clear_peaks(struct i2c_client *client, int page,
enum chips id)
{
int ret;
- if (id == ltc2978)
- ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
- else
+ if (id == ltc3880 || id == ltc3883)
ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
+ else
+ ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
return ret;
}
int ret;
switch (reg) {
+ case PMBUS_VIRT_RESET_IIN_HISTORY:
+ data->iin_max = 0x7c00;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
case PMBUS_VIRT_RESET_IOUT_HISTORY:
data->iout_max[page] = 0x7c00;
+ data->iout_min[page] = 0xfbff;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
case PMBUS_VIRT_RESET_TEMP2_HISTORY:
ret = ltc2978_clear_peaks(client, page, data->id);
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
- data->temp_min = 0x7bff;
+ data->temp_min[page] = 0x7bff;
data->temp_max[page] = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
}
static const struct i2c_device_id ltc2978_id[] = {
+ {"ltc2974", ltc2974},
{"ltc2978", ltc2978},
{"ltc3880", ltc3880},
+ {"ltc3883", ltc3883},
{}
};
MODULE_DEVICE_TABLE(i2c, ltc2978_id);
if (chip_id < 0)
return chip_id;
- if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) {
+ if (chip_id == LTC2974_ID) {
+ data->id = ltc2974;
+ } else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) {
data->id = ltc2978;
} else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) {
data->id = ltc3880;
+ } else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID) {
+ data->id = ltc3883;
} else {
dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
return -ENODEV;
data->vin_max = 0x7c00;
for (i = 0; i < ARRAY_SIZE(data->vout_min); i++)
data->vout_min[i] = 0xffff;
- data->temp_min = 0x7bff;
+ for (i = 0; i < ARRAY_SIZE(data->iout_min); i++)
+ data->iout_min[i] = 0xfbff;
+ for (i = 0; i < ARRAY_SIZE(data->iout_max); i++)
+ data->iout_max[i] = 0x7c00;
+ for (i = 0; i < ARRAY_SIZE(data->temp_min); i++)
+ data->temp_min[i] = 0x7bff;
for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
data->temp_max[i] = 0x7c00;
data->temp2_max = 0x7c00;
switch (data->id) {
+ case ltc2974:
+ info->read_word_data = ltc2974_read_word_data;
+ info->pages = LTC2974_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_TEMP2;
+ for (i = 0; i < info->pages; i++) {
+ info->func[i] |= PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+ }
+ break;
case ltc2978:
info->read_word_data = ltc2978_read_word_data;
info->pages = LTC2978_NUM_PAGES;
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
| PMBUS_HAVE_POUT
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
- data->iout_max[0] = 0x7c00;
- data->iout_max[1] = 0x7c00;
+ break;
+ case ltc3883:
+ info->read_word_data = ltc3883_read_word_data;
+ info->pages = LTC3883_NUM_PAGES;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
break;
default:
return -ENODEV;
module_i2c_driver(ltc2978_driver);
MODULE_AUTHOR("Guenter Roeck");
-MODULE_DESCRIPTION("PMBus driver for LTC2978 and LTC3880");
+MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, and LTC3883");
MODULE_LICENSE("GPL");
projects / firefly-linux-kernel-4.4.55.git / commitdiff