/* Data set by hardware interface driver */
const char *hw_name; /* Hardware bus name */
- unsigned int quirks; /* Deviations from spec. */
+ u64 quirks; /* Deviations from spec. */
/* Controller doesn't honor resets unless we touch the clock register */
- #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
+ #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1LL<<0)
/* Controller has bad caps bits, but really supports DMA */
- #define SDHCI_QUIRK_FORCE_DMA (1<<1)
+ #define SDHCI_QUIRK_FORCE_DMA (1LL<<1)
/* Controller doesn't like to be reset when there is no card inserted. */
- #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
+ #define SDHCI_QUIRK_NO_CARD_NO_RESET (1LL<<2)
/* Controller doesn't like clearing the power reg before a change */
- #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
+ #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1LL<<3)
/* Controller has flaky internal state so reset it on each ios change */
- #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
+ #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1LL<<4)
/* Controller has an unusable DMA engine */
- #define SDHCI_QUIRK_BROKEN_DMA (1<<5)
+ #define SDHCI_QUIRK_BROKEN_DMA (1LL<<5)
/* Controller has an unusable ADMA engine */
- #define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
+ #define SDHCI_QUIRK_BROKEN_ADMA (1LL<<6)
/* Controller can only DMA from 32-bit aligned addresses */
- #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
+ #define SDHCI_QUIRK_32BIT_DMA_ADDR (1LL<<7)
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
- #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
+ #define SDHCI_QUIRK_32BIT_DMA_SIZE (1LL<<8)
/* Controller can only ADMA chunks that are a multiple of 32 bits */
- #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
+ #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1LL<<9)
/* Controller needs to be reset after each request to stay stable */
- #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
+ #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1LL<<10)
/* Controller needs voltage and power writes to happen separately */
- #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
+ #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1LL<<11)
/* Controller provides an incorrect timeout value for transfers */
- #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
+ #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1LL<<12)
/* Controller has an issue with buffer bits for small transfers */
- #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
+ #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1LL<<13)
/* Controller does not provide transfer-complete interrupt when not busy */
- #define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
+ #define SDHCI_QUIRK_NO_BUSY_IRQ (1LL<<14)
/* Controller has unreliable card detection */
- #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
+ #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1LL<<15)
/* Controller reports inverted write-protect state */
- #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
+ #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1LL<<16)
/* Controller has nonstandard clock management */
- #define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
+ #define SDHCI_QUIRK_NONSTANDARD_CLOCK (1LL<<17)
/* Controller does not like fast PIO transfers */
- #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
+ #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1LL<<18)
/* Controller losing signal/interrupt enable states after reset */
- #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
+ #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1LL<<19)
/* Controller has to be forced to use block size of 2048 bytes */
- #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
+ #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1LL<<20)
/* Controller cannot do multi-block transfers */
- #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
+ #define SDHCI_QUIRK_NO_MULTIBLOCK (1LL<<21)
/* Controller can only handle 1-bit data transfers */
- #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
+ #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1LL<<22)
/* Controller needs 10ms delay between applying power and clock */
- #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
+ #define SDHCI_QUIRK_DELAY_AFTER_POWER (1LL<<23)
/* Controller uses SDCLK instead of TMCLK for data timeouts */
- #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
+ #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1LL<<24)
/* Controller reports wrong base clock capability */
- #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
+ #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1LL<<25)
/* Controller cannot support End Attribute in NOP ADMA descriptor */
- #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
+ #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1LL<<26)
/* Controller is missing device caps. Use caps provided by host */
- #define SDHCI_QUIRK_MISSING_CAPS (1<<27)
+ #define SDHCI_QUIRK_MISSING_CAPS (1LL<<27)
/* Controller uses Auto CMD12 command to stop the transfer */
- #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
+ #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1LL<<28)
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
- #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
+ #define SDHCI_QUIRK_NO_HISPD_BIT (1LL<<29)
/* Controller write protect bit is broken. Assume no write protection */
- #define SDHCI_QUIRK_BROKEN_WRITE_PROTECT (1<<30)
+ #define SDHCI_QUIRK_BROKEN_WRITE_PROTECT (1LL<<30)
/* Controller needs INTERRUPT_AT_BLOCK_GAP enabled to detect card interrupts */
- #define SDHCI_QUIRK_ENABLE_INTERRUPT_AT_BLOCK_GAP (1<<31)
+ #define SDHCI_QUIRK_ENABLE_INTERRUPT_AT_BLOCK_GAP (1LL<<31)
/* Controller should not program HIGH_SPEED_EN after switching to high speed */
#define SDHCI_QUIRK_BROKEN_CTRL_HISPD (1LL<<32)
/* Controller supports 8-bit data width */
projects / firefly-linux-kernel-4.4.55.git / commitdiff