From: kfx <kfx@rock-chips.com>
Date: Tue, 16 Oct 2012 09:09:47 +0000 (+0800)
Subject: rk2928: rk2928 sdk(bga) initial
X-Git-Tag: firefly_0821_release~8406
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=031c9a58425e31a601bf48336e527cc1664fc10e;p=firefly-linux-kernel-4.4.55.git
rk2928: rk2928 sdk(bga) initial
---
diff --git a/arch/arm/configs/rk2926_m713_defconfig b/arch/arm/configs/rk2926_m713_defconfig
deleted file mode 100644
index 4b4afe1e2018..000000000000
--- a/arch/arm/configs/rk2926_m713_defconfig
+++ /dev/null
@@ -1,417 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZO=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-CONFIG_ASHMEM=y
-# CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_RK2928=y
-CONFIG_RK_CLOCK_PROC=y
-CONFIG_RK_USB_UART=y
-CONFIG_MACH_RK2928_A720=y
-CONFIG_MACH_RK2926_M713=y
-CONFIG_FIQ_DEBUGGER=y
-CONFIG_FIQ_DEBUGGER_NO_SLEEP=y
-CONFIG_FIQ_DEBUGGER_CONSOLE=y
-CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_COMPACTION=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_WAKELOCK=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_DEBUG=y
-CONFIG_SUSPEND_TIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NETFILTER=y
-# CONFIG_BRIDGE_NETFILTER is not set
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=y
-CONFIG_NF_CONNTRACK_FTP=y
-CONFIG_NF_CONNTRACK_H323=y
-CONFIG_NF_CONNTRACK_IRC=y
-CONFIG_NF_CONNTRACK_NETBIOS_NS=y
-CONFIG_NF_CONNTRACK_PPTP=y
-CONFIG_NF_CONNTRACK_SANE=y
-CONFIG_NF_CONNTRACK_SIP=y
-CONFIG_NF_CONNTRACK_TFTP=y
-CONFIG_NF_CT_NETLINK=y
-CONFIG_NETFILTER_TPROXY=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-CONFIG_NETFILTER_XT_TARGET_NFLOG=y
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
-CONFIG_NETFILTER_XT_TARGET_TPROXY=y
-CONFIG_NETFILTER_XT_TARGET_TRACE=y
-CONFIG_NETFILTER_XT_MATCH_COMMENT=y
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_HELPER=y
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
-CONFIG_NETFILTER_XT_MATCH_LENGTH=y
-CONFIG_NETFILTER_XT_MATCH_LIMIT=y
-CONFIG_NETFILTER_XT_MATCH_MAC=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-CONFIG_NETFILTER_XT_MATCH_POLICY=y
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
-CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
-CONFIG_NETFILTER_XT_MATCH_SOCKET=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
-CONFIG_NETFILTER_XT_MATCH_STRING=y
-CONFIG_NETFILTER_XT_MATCH_TIME=y
-CONFIG_NETFILTER_XT_MATCH_U32=y
-CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_AH=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_RAW=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-CONFIG_NF_CONNTRACK_IPV6=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_TARGET_LOG=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_REJECT=y
-CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_RAW=y
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-CONFIG_PHONET=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_U32=y
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=y
-CONFIG_NET_ACT_MIRRED=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM4325=y
-CONFIG_BT_AUTOSLEEP=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_RFKILL=y
-CONFIG_RFKILL_RK=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_RKNAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_MISC_DEVICES=y
-CONFIG_UID_STAT=y
-CONFIG_APANIC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN_80211=y
-CONFIG_RTL8188EU=y
-CONFIG_USB_USBNET=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=y
-CONFIG_PPPOLAC=y
-CONFIG_PPPOPNS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYRESET=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_XPAD=y
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=y
-CONFIG_TABLET_USB_AIPTEK=y
-CONFIG_TABLET_USB_GTCO=y
-CONFIG_TABLET_USB_HANWANG=y
-CONFIG_TABLET_USB_KBTAB=y
-CONFIG_TABLET_USB_WACOM=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_SITRONIX_A720=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_KEYCHORD=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_GS_MMA7660=y
-CONFIG_SENSOR_DEVICE=y
-CONFIG_GSENSOR_DEVICE=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C0_CONTROLLER_RK30=y
-CONFIG_I2C1_CONTROLLER_RK30=y
-CONFIG_I2C2_CONTROLLER_RK30=y
-CONFIG_ADC_RK30=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_EXPANDED_GPIO_NUM=0
-CONFIG_EXPANDED_GPIO_IRQ_NUM=0
-CONFIG_SPI_FPGA_GPIO_NUM=0
-CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0
-CONFIG_POWER_SUPPLY=y
-CONFIG_BATTERY_RK30_ADC_FAC=y
-CONFIG_BATTERY_RK30_AC_CHARGE=y
-CONFIG_BATTERY_RK30_VOL3V8=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TPS65090=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_ACT8931=y
-CONFIG_RK30_PWM_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_GC0308=y
-CONFIG_GC0308_USER_DEFINED_SERIES=y
-CONFIG_VIDEO_RK29=y
-CONFIG_VIDEO_RK29_CAMMEM_ION=y
-CONFIG_ION=y
-CONFIG_ION_ROCKCHIP=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_LCD_RK2928_A720=y
-CONFIG_FB_ROCKCHIP=y
-CONFIG_LCDC_RK2928=y
-CONFIG_RK_HDMI=y
-CONFIG_HDMI_RK2928=y
-CONFIG_RGA_RK30=y
-CONFIG_RK_LVDS=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_RK29_SOC=y
-CONFIG_SND_I2S_DMA_EVENT_STATIC=y
-CONFIG_SND_RK_SOC_RK2928=y
-CONFIG_SND_RK29_CODEC_SOC_SLAVE=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_ACRUX=y
-CONFIG_HID_ACRUX_FF=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EMS_FF=y
-CONFIG_HID_ELECOM=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KEYTOUCH=y
-CONFIG_HID_KYE=y
-CONFIG_HID_UCLOGIC=y
-CONFIG_HID_WALTOP=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LCPOWER=y
-CONFIG_HID_LOGITECH=y
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_MULTITOUCH=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_ORTEK=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_PICOLCD=y
-CONFIG_HID_QUANTA=y
-CONFIG_HID_ROCCAT_ARVO=y
-CONFIG_HID_ROCCAT_KONE=y
-CONFIG_HID_ROCCAT_KONEPLUS=y
-CONFIG_HID_ROCCAT_KOVAPLUS=y
-CONFIG_HID_ROCCAT_PYRA=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_OPTION=y
-CONFIG_USB_GADGET=y
-CONFIG_USB20_HOST=y
-CONFIG_USB20_OTG=y
-CONFIG_DWC_OTG_BOTH_HOST_SLAVE=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_EMBEDDED_SDIO=y
-CONFIG_MMC_PARANOID_SD_INIT=y
-CONFIG_SDMMC_RK29=y
-CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO=y
-# CONFIG_SDMMC1_RK29 is not set
-CONFIG_SWITCH=y
-CONFIG_SWITCH_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HYM8563=y
-CONFIG_TPS65910_RTC=y
-CONFIG_STAGING=y
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-# CONFIG_CMMB is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-# CONFIG_EXT4_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
-CONFIG_ENABLE_DEFAULT_TRACERS=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/rk2928_sdk_defconfig b/arch/arm/configs/rk2928_sdk_defconfig
index cf15f6e70784..2259638a18f6 100755
--- a/arch/arm/configs/rk2928_sdk_defconfig
+++ b/arch/arm/configs/rk2928_sdk_defconfig
@@ -176,6 +176,8 @@ CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM4325=y
CONFIG_BT_AUTOSLEEP=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
CONFIG_RFKILL=y
CONFIG_RFKILL_RK=y
CONFIG_DEVTMPFS=y
@@ -203,7 +205,7 @@ CONFIG_PHYLIB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN_80211=y
-CONFIG_RKWIFI=y
+CONFIG_RTL8188EU=y
CONFIG_USB_USBNET=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
@@ -231,27 +233,16 @@ CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_EETI_EGALAX=y
-CONFIG_EETI_EGALAX_MAX_X=1087
-CONFIG_EETI_EGALAX_MAX_Y=800
+CONFIG_TOUCHSCREEN_GT811_IIC=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_KEYCHORD=y
CONFIG_INPUT_UINPUT=y
-CONFIG_COMPASS_AK8975=y
-CONFIG_GS_MMA8452=y
-CONFIG_GYRO_L3G4200D=y
-CONFIG_LS_CM3217=y
+CONFIG_GS_MMA7660=y
CONFIG_SENSOR_DEVICE=y
CONFIG_GSENSOR_DEVICE=y
-CONFIG_COMPASS_DEVICE=y
-CONFIG_GYROSCOPE_DEVICE=y
-CONFIG_LIGHT_DEVICE=y
# CONFIG_SERIO is not set
# CONFIG_CONSOLE_TRANSLATIONS is not set
# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_RK29=y
-CONFIG_UART0_RK29=y
-CONFIG_UART0_CTS_RTS_RK29=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
@@ -266,18 +257,22 @@ CONFIG_EXPANDED_GPIO_IRQ_NUM=0
CONFIG_SPI_FPGA_GPIO_NUM=0
CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0
CONFIG_POWER_SUPPLY=y
-CONFIG_TEST_POWER=y
+CONFIG_BATTERY_RK30_ADC_FAC=y
+CONFIG_BATTERY_RK30_AC_CHARGE=y
+CONFIG_BATTERY_RK30_VOL3V8=y
+CONFIG_POWER_ON_CHARGER_DISPLAY=y
# CONFIG_HWMON is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65090=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_ACT8931=y
CONFIG_RK30_PWM_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2659=y
-CONFIG_SOC_CAMERA_OV5642=y
+CONFIG_SOC_CAMERA_GC0308=y
+CONFIG_GC0308_USER_DEFINED_SERIES=y
CONFIG_VIDEO_RK29=y
CONFIG_VIDEO_RK29_CAMMEM_ION=y
CONFIG_ION=y
@@ -288,7 +283,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_DISPLAY_SUPPORT=y
-CONFIG_LCD_HSD100PXN=y
+CONFIG_LCD_RK2928_A720=y
CONFIG_FB_ROCKCHIP=y
CONFIG_LCDC_RK2928=y
CONFIG_RK_HDMI=y
@@ -375,11 +370,13 @@ CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_GADGET=y
CONFIG_USB20_HOST=y
CONFIG_USB20_OTG=y
+CONFIG_DWC_OTG_BOTH_HOST_SLAVE=y
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_EMBEDDED_SDIO=y
CONFIG_MMC_PARANOID_SD_INIT=y
CONFIG_SDMMC_RK29=y
+# CONFIG_SDMMC1_RK29 is not set
CONFIG_SWITCH=y
CONFIG_SWITCH_GPIO=y
CONFIG_RTC_CLASS=y
diff --git a/arch/arm/mach-rk2928/Kconfig b/arch/arm/mach-rk2928/Kconfig
index 6c8548090d2c..ed6ec9fadffb 100644
--- a/arch/arm/mach-rk2928/Kconfig
+++ b/arch/arm/mach-rk2928/Kconfig
@@ -10,7 +10,7 @@ config MACH_RK2928
config MACH_RK2928_SDK
- bool "RK2928 SDK board"
+ bool "RK2928(BGA) SDK board"
config MACH_RK2926_SDK
bool "RK2926 SDK board"
diff --git a/arch/arm/mach-rk2928/board-rk2926-sdk.c b/arch/arm/mach-rk2928/board-rk2926-sdk.c
index f477c7c25c6b..4e408ef1d73c 100755
--- a/arch/arm/mach-rk2928/board-rk2926-sdk.c
+++ b/arch/arm/mach-rk2928/board-rk2926-sdk.c
@@ -55,8 +55,8 @@
#include "../../../drivers/spi/rk29_spim.h"
#endif
-#include "board-rk2928-a720-camera.c"
-#include "board-rk2928-a720-key.c"
+#include "board-rk2928-sdk-camera.c"
+#include "board-rk2928-sdk-key.c"
int __sramdata g_pmic_type = 0;
#define PMIC_TYPE_TPS65910 2
@@ -619,7 +619,7 @@ static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_I2C0_RK30
#ifdef CONFIG_MFD_TPS65910
#define TPS65910_HOST_IRQ RK2928_PIN1_PB2
-#include "board-rk2928-a720-tps65910.c"
+#include "board-rk2928-sdk-tps65910.c"
#endif
#ifdef CONFIG_REGULATOR_ACT8931
#define ACT8931_HOST_IRQ RK2928_PIN1_PB1
diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c b/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c
index d495acb3251a..dfcf48910200 100755
--- a/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c
+++ b/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c
@@ -8,7 +8,12 @@
#ifdef CONFIG_REGULATOR_ACT8931
+#if defined(CONFIG_MACH_RK2928_SDK)
+#define ACT8931_CHGSEL_PIN RK2928_PIN0_PD0
+#else
#define ACT8931_CHGSEL_PIN RK2928_PIN1_PA1
+#endif
+
#define ACT8931_CHGSEL_VALUE GPIO_LOW /* Decline to 20% current */
extern int platform_device_register(struct platform_device *pdev);
diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c b/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c
old mode 100644
new mode 100755
index ad549249f5c2..670fc7f6650c
--- a/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c
+++ b/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c
@@ -2,13 +2,13 @@
/*---------------- Camera Sensor Macro Define Begin ------------------------*/
/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
#define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5642 /* back camera sensor */
-#define CONFIG_SENSOR_IIC_ADDR_0 0x78// 0
+#define CONFIG_SENSOR_IIC_ADDR_0 0
#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 0
#define CONFIG_SENSOR_CIF_INDEX_0 0
#define CONFIG_SENSOR_ORIENTATION_0 90
#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO
#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO
-#define CONFIG_SENSOR_POWERDN_PIN_0 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_POWERDN_PIN_0 INVALID_GPIO//RK2928_PIN3_PB3
#define CONFIG_SENSOR_FALSH_PIN_0 INVALID_GPIO
#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
@@ -31,7 +31,7 @@
#define CONFIG_SENSOR_ORIENTATION_01 90
#define CONFIG_SENSOR_POWER_PIN_01 INVALID_GPIO
#define CONFIG_SENSOR_RESET_PIN_01 INVALID_GPIO
-#define CONFIG_SENSOR_POWERDN_PIN_01 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_POWERDN_PIN_01 INVALID_GPIO//RK2928_PIN3_PB3
#define CONFIG_SENSOR_FALSH_PIN_01 INVALID_GPIO
#define CONFIG_SENSOR_POWERACTIVE_LEVEL_01 RK29_CAM_POWERACTIVE_L
#define CONFIG_SENSOR_RESETACTIVE_LEVEL_01 RK29_CAM_RESETACTIVE_L
@@ -54,7 +54,7 @@
#define CONFIG_SENSOR_ORIENTATION_02 90
#define CONFIG_SENSOR_POWER_PIN_02 INVALID_GPIO
#define CONFIG_SENSOR_RESET_PIN_02 INVALID_GPIO
-#define CONFIG_SENSOR_POWERDN_PIN_02 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_POWERDN_PIN_02 INVALID_GPIO//RK2928_PIN3_PB3
#define CONFIG_SENSOR_FALSH_PIN_02 INVALID_GPIO
#define CONFIG_SENSOR_POWERACTIVE_LEVEL_02 RK29_CAM_POWERACTIVE_L
#define CONFIG_SENSOR_RESETACTIVE_LEVEL_02 RK29_CAM_RESETACTIVE_L
@@ -70,14 +70,19 @@
#define CONFIG_SENSOR_SVGA_FPS_FIXED_02 15000
#define CONFIG_SENSOR_720P_FPS_FIXED_02 30000
-#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_OV2659 /* front camera sensor 0 */
-#define CONFIG_SENSOR_IIC_ADDR_1 0// 0x60
-#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 3
+#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_GC0308 /* front camera sensor 0 */
+#define CONFIG_SENSOR_IIC_ADDR_1 0x42
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 1
#define CONFIG_SENSOR_CIF_INDEX_1 0
#define CONFIG_SENSOR_ORIENTATION_1 270
#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO
#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO
+
+#if defined(CONFIG_MACH_RK2928_SDK)
+#define CONFIG_SENSOR_POWERDN_PIN_1 RK2928_PIN3_PD7
+#else
#define CONFIG_SENSOR_POWERDN_PIN_1 RK2928_PIN3_PB3
+#endif
#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO
#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-key.c b/arch/arm/mach-rk2928/board-rk2928-sdk-key.c
index 1074027e5515..9c9b32f9caa6 100755
--- a/arch/arm/mach-rk2928/board-rk2928-sdk-key.c
+++ b/arch/arm/mach-rk2928/board-rk2928-sdk-key.c
@@ -8,16 +8,14 @@
#define PRESS_LEV_HIGH 0
static struct rk29_keys_button key_button[] = {
- {
- .desc = "vol-",
- .code = KEY_VOLUMEDOWN,
- .gpio = RK2928_PIN0_PD1,
- .active_low = PRESS_LEV_LOW,
- },
{
.desc = "play",
.code = KEY_POWER,
- .gpio = RK2928_PIN3_PC5,
+ #if defined(CONFIG_MACH_RK2928_SDK)
+ .gpio = RK2928_PIN0_PD1,
+ #else
+ .gpio = RK2928_PIN1_PA4,
+ #endif
.active_low = PRESS_LEV_LOW,
//.code_long_press = EV_ENCALL,
.wakeup = 1,
@@ -25,35 +23,15 @@ static struct rk29_keys_button key_button[] = {
{
.desc = "vol+",
.code = KEY_VOLUMEUP,
- .gpio = RK2928_PIN0_PD0,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "menu",
- .code = EV_MENU,
- .adc_value = 135,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "home",
- .code = KEY_HOME,
- .adc_value = 550,
.gpio = INVALID_GPIO,
+ .adc_value = 1,
.active_low = PRESS_LEV_LOW,
},
{
- .desc = "esc",
- .code = KEY_BACK,
- .adc_value = 334,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "camera",
- .code = KEY_CAMERA,
- .adc_value = 743,
+ .desc = "vol-",
+ .code = KEY_VOLUMEDOWN,
.gpio = INVALID_GPIO,
+ .adc_value = 512,
.active_low = PRESS_LEV_LOW,
},
};
diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c b/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c
index 1a8773b6d1bb..7215da55b8b7 100755
--- a/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c
+++ b/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c
@@ -7,18 +7,22 @@
#include <mach/gpio.h>
#include <mach/iomux.h>
-#define gpio_readl(offset) readl_relaxed(RK2928_GPIO3_BASE + offset)
-#define gpio_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO3_BASE + offset); dsb(); } while (0)
+#define gpio_readl(offset) readl_relaxed(RK2928_GPIO1_BASE + offset)
+#define gpio_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO1_BASE + offset); dsb(); } while (0)
#define GPIO_SWPORTA_DR 0x0000
#define GPIO_SWPORTA_DDR 0x0004
-#define GPIO3_D2_OUTPUT (1<<26)
-#define GPIO3_D2_OUTPUT_HIGH (1<<26)
-#define GPIO3_D2_OUTPUT_LOW (~(1<<26))
+#define GPIO1_A1_OUTPUT (1<<1)
+#define GPIO1_A1_OUTPUT_HIGH (1<<1)
+#define GPIO1_A1_OUTPUT_LOW (~(1<<1))
#ifdef CONFIG_MFD_TPS65910
-#define PMU_POWER_SLEEP RK2928_PIN3_PD2
+#if defined(CONFIG_MACH_RK2928_SDK)
+#define PMU_POWER_SLEEP RK2928_PIN0_PD0
+#else
+#define PMU_POWER_SLEEP RK2928_PIN1_PA1
+#endif
extern int platform_device_register(struct platform_device *pdev);
int tps65910_pre_init(struct tps65910 *tps65910){
@@ -224,12 +228,16 @@ int tps65910_pre_init(struct tps65910 *tps65910){
return 0;
}
+
int tps65910_post_init(struct tps65910 *tps65910)
{
struct regulator *dcdc;
struct regulator *ldo;
printk("%s,line=%d\n", __func__,__LINE__);
+ g_pmic_type = PMIC_TYPE_TPS65910;
+ printk("%s:g_pmic_type=%d\n",__func__,g_pmic_type);
+
#ifdef CONFIG_RK30_PWM_REGULATOR
platform_device_register(&pwm_regulator_device[0]);
#endif
@@ -240,14 +248,14 @@ int tps65910_post_init(struct tps65910 *tps65910)
printk("%s set vio vcc_io=%dmV end\n", __func__, regulator_get_voltage(dcdc));
regulator_put(dcdc);
udelay(100);
-
+ /*
ldo = regulator_get(NULL, "vpll"); // vcc25
regulator_set_voltage(ldo, 2500000, 2500000);
regulator_enable(ldo);
printk("%s set vpll vcc25=%dmV end\n", __func__, regulator_get_voltage(ldo));
regulator_put(ldo);
udelay(100);
-
+ */
ldo = regulator_get(NULL, "vdig2"); // vdd12
regulator_set_voltage(ldo, 1200000, 1200000);
regulator_enable(ldo);
@@ -277,7 +285,7 @@ int tps65910_post_init(struct tps65910 *tps65910)
udelay(100);
ldo = regulator_get(NULL, "vdig1"); //vcc18_cif
- regulator_set_voltage(ldo, 1800000, 1800000);
+ regulator_set_voltage(ldo, 1500000, 1500000);
regulator_enable(ldo);
printk("%s set vdig1 vcc18_cif=%dmV end\n", __func__, regulator_get_voltage(ldo));
regulator_put(ldo);
@@ -296,18 +304,19 @@ int tps65910_post_init(struct tps65910 *tps65910)
printk("%s set vaux2 vcca33=%dmV end\n", __func__, regulator_get_voltage(ldo));
regulator_put(ldo);
udelay(100);
-
- ldo = regulator_get(NULL, "vdac"); //
+ /*
+ ldo = regulator_get(NULL, "vdac"); // vccio_wl
regulator_set_voltage(ldo,1800000,1800000);
regulator_enable(ldo);
- printk("%s set vdac =%dmV end\n", __func__, regulator_get_voltage(ldo));
+ printk("%s set vdac vccio_wl=%dmV end\n", __func__, regulator_get_voltage(ldo));
regulator_put(ldo);
udelay(100);
-
+ */
ldo = regulator_get(NULL, "vmmc"); //vccio_wl
regulator_set_voltage(ldo,3300000,3300000);
regulator_enable(ldo);
printk("%s set vmmc vccio_wl=%dmV end\n", __func__, regulator_get_voltage(ldo));
+ regulator_disable(ldo);
regulator_put(ldo);
udelay(100);
@@ -315,7 +324,6 @@ int tps65910_post_init(struct tps65910 *tps65910)
return 0;
}
-
static struct regulator_consumer_supply tps65910_smps1_supply[] = {
{
.supply = "vdd1",
@@ -570,25 +578,23 @@ static struct regulator_init_data tps65910_ldo8 = {
.num_consumer_supplies = ARRAY_SIZE(tps65910_ldo8_supply),
.consumer_supplies = tps65910_ldo8_supply,
};
-
-void __sramfunc board_pmu_suspend(void)
+void __sramfunc board_pmu_tps65910_suspend(void)
{
int ret;
ret = gpio_readl(GPIO_SWPORTA_DDR);
- gpio_writel(ret | GPIO3_D2_OUTPUT, GPIO_SWPORTA_DDR);
+ gpio_writel(ret | GPIO1_A1_OUTPUT, GPIO_SWPORTA_DDR);
ret = gpio_readl(GPIO_SWPORTA_DR);
- gpio_writel(ret | GPIO3_D2_OUTPUT_HIGH, GPIO_SWPORTA_DR); //set pmu_sleep output high
+ gpio_writel(ret | GPIO1_A1_OUTPUT_HIGH, GPIO_SWPORTA_DR); //set pmu_sleep output high
}
-void __sramfunc board_pmu_resume(void)
+void __sramfunc board_pmu_tps65910_resume(void)
{
int ret;
ret = gpio_readl(GPIO_SWPORTA_DDR);
- gpio_writel(ret | GPIO3_D2_OUTPUT, GPIO_SWPORTA_DDR);
+ gpio_writel(ret | GPIO1_A1_OUTPUT, GPIO_SWPORTA_DDR);
ret = gpio_readl(GPIO_SWPORTA_DR);
- gpio_writel(ret & GPIO3_D2_OUTPUT_LOW, GPIO_SWPORTA_DR); //set pmu_sleep output low
+ gpio_writel(ret & GPIO1_A1_OUTPUT_LOW, GPIO_SWPORTA_DR); //set pmu_sleep output low
sram_udelay(2000);
}
-
static struct tps65910_board tps65910_data = {
.irq = (unsigned)TPS65910_HOST_IRQ,
.irq_base = NR_GIC_IRQS + NR_GPIO_IRQS,
diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk.c b/arch/arm/mach-rk2928/board-rk2928-sdk.c
index ba63ef7a7ae2..4e2a00f5faad 100755
--- a/arch/arm/mach-rk2928/board-rk2928-sdk.c
+++ b/arch/arm/mach-rk2928/board-rk2928-sdk.c
@@ -1,1041 +1,957 @@
-/* arch/arm/mach-rk2928/board-rk2928-fpga.c
- *
- * Copyright (C) 2012 ROCKCHIP, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/skbuff.h>
-#include <linux/spi/spi.h>
-#include <linux/mmc/host.h>
-#include <linux/ion.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/hardware/gic.h>
-#include <mach/dvfs.h>
-
-#include <mach/board.h>
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/gpio.h>
-#include <mach/iomux.h>
-#include <linux/fb.h>
-#include <linux/regulator/machine.h>
-#include <linux/rfkill-rk.h>
-#include <linux/sensor-dev.h>
-#include <linux/mfd/tps65910.h>
-#include <linux/regulator/rk29-pwm-regulator.h>
-#if defined(CONFIG_HDMI_RK30)
- #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
-#endif
-
-#if defined(CONFIG_SPIM_RK29)
-#include "../../../drivers/spi/rk29_spim.h"
-#endif
-#if defined(CONFIG_GPS_RK)
-#include "../../../drivers/misc/gps/rk_gps/rk_gps.h"
-#endif
-
-
-#ifdef CONFIG_THREE_FB_BUFFER
-#define RK30_FB0_MEM_SIZE 12*SZ_1M
-#else
-#define RK30_FB0_MEM_SIZE 8*SZ_1M
-#endif
-
-#include "board-rk2928-sdk-camera.c"
-#include "board-rk2928-sdk-key.c"
-
-#if defined (CONFIG_EETI_EGALAX)
-#define TOUCH_RESET_PIN RK2928_PIN3_PC3
-#define TOUCH_INT_PIN RK2928_PIN3_PC7
-
-static int EETI_EGALAX_init_platform_hw(void)
-{
- if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
- gpio_free(TOUCH_RESET_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
-
- if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
- gpio_free(TOUCH_INT_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(TOUCH_INT_PIN, 1);
- gpio_direction_output(TOUCH_RESET_PIN, 0);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
-
- return 0;
-}
-
-
-static struct eeti_egalax_platform_data eeti_egalax_info = {
- .model= 1003,
- .init_platform_hw= EETI_EGALAX_init_platform_hw,
- .standby_pin = INVALID_GPIO,
- //.standby_value = GPIO_HIGH,
- .disp_on_pin = INVALID_GPIO,
- //.disp_on_value = GPIO_HIGH,
-};
-#endif
-
-static struct spi_board_info board_spi_devices[] = {
-};
-
-/***********************************************************
-* rk30 backlight
-************************************************************/
-#ifdef CONFIG_BACKLIGHT_RK29_BL
-#define PWM_ID 0
-#define PWM_MUX_NAME GPIO0D2_PWM_0_NAME
-#define PWM_MUX_MODE GPIO0D_PWM_0
-#define PWM_MUX_MODE_GPIO GPIO0D_GPIO0D2
-#define PWM_GPIO RK2928_PIN0_PD2
-#define PWM_EFFECT_VALUE 1
-
-#define LCD_DISP_ON_PIN
-
-#ifdef LCD_DISP_ON_PIN
-
-#define BL_EN_PIN RK2928_PIN3_PC4
-#define BL_EN_VALUE GPIO_HIGH
-#endif
-static int rk29_backlight_io_init(void)
-{
- int ret = 0;
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
-#ifdef LCD_DISP_ON_PIN
- // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
-
- ret = gpio_request(BL_EN_PIN, NULL);
- if (ret != 0) {
- gpio_free(BL_EN_PIN);
- }
-
- gpio_direction_output(BL_EN_PIN, 0);
- gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
-#endif
- return ret;
-}
-
-static int rk29_backlight_io_deinit(void)
-{
- int ret = 0;
-#ifdef LCD_DISP_ON_PIN
- gpio_free(BL_EN_PIN);
-#endif
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- return ret;
-}
-
-static int rk29_backlight_pwm_suspend(void)
-{
- int ret = 0;
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- if (gpio_request(PWM_GPIO, NULL)) {
- printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
- return -1;
- }
- gpio_direction_output(PWM_GPIO, GPIO_LOW);
-#ifdef LCD_DISP_ON_PIN
- gpio_direction_output(BL_EN_PIN, 0);
- gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
-#endif
-
- return ret;
-}
-
-static int rk29_backlight_pwm_resume(void)
-{
- gpio_free(PWM_GPIO);
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
-#ifdef LCD_DISP_ON_PIN
- msleep(30);
- gpio_direction_output(BL_EN_PIN, 1);
- gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
-#endif
- return 0;
-}
-
-static struct rk29_bl_info rk29_bl_info = {
- .pwm_id = PWM_ID,
- .bl_ref = PWM_EFFECT_VALUE,
- .io_init = rk29_backlight_io_init,
- .io_deinit = rk29_backlight_io_deinit,
- .pwm_suspend = rk29_backlight_pwm_suspend,
- .pwm_resume = rk29_backlight_pwm_resume,
-};
-
-static struct platform_device rk29_device_backlight = {
- .name = "rk29_backlight",
- .id = -1,
- .dev = {
- .platform_data = &rk29_bl_info,
- }
-};
-
-#endif
-
-/*MMA8452 gsensor*/
-#if defined (CONFIG_GS_MMA8452)
-
-static int mma8452_init_platform_hw(void)
-{
- return 0;
-}
-
-static struct sensor_platform_data mma8452_info = {
- .type = SENSOR_TYPE_ACCEL,
- .irq_enable = 1,
- .poll_delay_ms = 30,
- .init_platform_hw = mma8452_init_platform_hw,
- .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
-};
-#endif
-#if defined (CONFIG_COMPASS_AK8975)
-static struct sensor_platform_data akm8975_info =
-{
- .type = SENSOR_TYPE_COMPASS,
- .irq_enable = 1,
- .poll_delay_ms = 30,
- .m_layout =
- {
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
-
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
-
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
-
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
- }
-};
-
-#endif
-
-#if defined(CONFIG_GYRO_L3G4200D)
-
-#include <linux/l3g4200d.h>
-
-static int l3g4200d_init_platform_hw(void)
-{
- return 0;
-}
-
-static struct sensor_platform_data l3g4200d_info = {
- .type = SENSOR_TYPE_GYROSCOPE,
- .irq_enable = 1,
- .poll_delay_ms = 30,
- .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
- .init_platform_hw = l3g4200d_init_platform_hw,
- .x_min = 40,//x_min,y_min,z_min = (0-100) according to hardware
- .y_min = 40,
- .z_min = 20,
-};
-
-#endif
-
-#ifdef CONFIG_LS_CM3217
-static struct sensor_platform_data cm3217_info = {
- .type = SENSOR_TYPE_LIGHT,
- .irq_enable = 0,
- .poll_delay_ms = 500,
-};
-
-#endif
-
-#ifdef CONFIG_FB_ROCKCHIP
-
-#define LCD_CABC_MUX_NAME GPIO2D1_LCDC0_D23_LCDC1_D23_NAME
-#define LCD_CABC_GPIO_MODE GPIO2D_GPIO2D1
-
-#define LCD_CABC_EN RK2928_PIN2_PD1
-#define LCD_CABC_EN_VALUE GPIO_HIGH
-
-static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
-{
- int ret = 0;
-
- rk30_mux_api_set(LCD_CABC_MUX_NAME, LCD_CABC_GPIO_MODE);
-
- ret = gpio_request(LCD_CABC_EN, NULL);
- if (ret != 0)
- {
- gpio_free(LCD_CABC_EN);
- printk(KERN_ERR "request lcd cabc en pin fail!\n");
- return -1;
- }
- else
- {
- gpio_direction_output(LCD_CABC_EN, !LCD_CABC_EN_VALUE); //disable
- }
- return 0;
-}
-static int rk_fb_io_disable(void)
-{
- return 0;
-}
-static int rk_fb_io_enable(void)
-{
- return 0;
-}
-
-#if defined(CONFIG_LCDC_RK2928)
-struct rk29fb_info lcdc_screen_info = {
- .prop = PRMRY, //primary display device
- .io_init = rk_fb_io_init,
- .io_disable = rk_fb_io_disable,
- .io_enable = rk_fb_io_enable,
- .set_screen_info = set_lcd_info,
-};
-#endif
-
-static struct resource resource_fb[] = {
- [0] = {
- .name = "fb0 buf",
- .start = 0,
- .end = 0,//RK30_FB0_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "ipp buf", //for rotate
- .start = 0,
- .end = 0,//RK30_FB0_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .name = "fb2 buf",
- .start = 0,
- .end = 0,//RK30_FB0_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device device_fb = {
- .name = "rk-fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(resource_fb),
- .resource = resource_fb,
-};
-#endif
-
-//LCDC
-#ifdef CONFIG_LCDC_RK2928
-static struct resource resource_lcdc[] = {
- [0] = {
- .name = "lcdc reg",
- .start = RK2928_LCDC_PHYS,
- .end = RK2928_LCDC_PHYS + RK2928_LCDC_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-
- [1] = {
- .name = "lcdc irq",
- .start = IRQ_LCDC,
- .end = IRQ_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device device_lcdc = {
- .name = "rk2928-lcdc",
- .id = 0,
- .num_resources = ARRAY_SIZE(resource_lcdc),
- .resource = resource_lcdc,
- .dev = {
- .platform_data = &lcdc_screen_info,
- },
-};
-#endif
-
-#ifdef CONFIG_ION
-#define ION_RESERVE_SIZE (80 * SZ_1M)
-static struct ion_platform_data rk30_ion_pdata = {
- .nr = 1,
- .heaps = {
- {
- .type = ION_HEAP_TYPE_CARVEOUT,
- .id = ION_NOR_HEAP_ID,
- .name = "norheap",
- .size = ION_RESERVE_SIZE,
- }
- },
-};
-
-static struct platform_device device_ion = {
- .name = "ion-rockchip",
- .id = 0,
- .dev = {
- .platform_data = &rk30_ion_pdata,
- },
-};
-#endif
-
-#ifdef CONFIG_RK30_PWM_REGULATOR
-const static int pwm_voltage_map[] = {
- 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000
-};
-
-static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
- {
- .supply = "vdd_core",
- }
-};
-
-struct regulator_init_data pwm_regulator_init_dcdc[1] =
-{
- {
- .constraints = {
- .name = "PWM_DCDC1",
- .min_uV = 600000,
- .max_uV = 1800000, //0.6-1.8V
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
- .consumer_supplies = pwm_dcdc1_consumers,
- },
-};
-
-static struct pwm_platform_data pwm_regulator_info[1] = {
- {
- .pwm_id = 2,
- .pwm_gpio = RK2928_PIN0_PD4,
- .pwm_iomux_name = GPIO0D4_PWM_2_NAME,
- .pwm_iomux_pwm = GPIO0D_PWM_2,
- .pwm_iomux_gpio = GPIO0D_GPIO0D4,
- .pwm_voltage = 1200000,
- .suspend_voltage = 1050000,
- .min_uV = 1000000,
- .max_uV = 1400000,
- .coefficient = 455, //45.5%
- .pwm_voltage_map = pwm_voltage_map,
- .init_data = &pwm_regulator_init_dcdc[0],
- },
-};
-
-struct platform_device pwm_regulator_device[1] = {
- {
- .name = "pwm-voltage-regulator",
- .id = 0,
- .dev = {
- .platform_data = &pwm_regulator_info[0],
- }
- },
-};
-#endif
-/**************************************************************************************************
- * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
-**************************************************************************************************/
-#ifdef CONFIG_SDMMC_RK29
-#include "board-rk2928-sdk-sdmmc.c"
-
-#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
-#define SDMMC0_WRITE_PROTECT_PIN RK2928_PIN1_PA7 //According to your own project to set the value of write-protect-pin.
-#endif
-
-#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
-#define SDMMC1_WRITE_PROTECT_PIN RK2928_PIN0_PD5 //According to your own project to set the value of write-protect-pin.
-#endif
-
-#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK2928_PIN0_PB2
-
-#endif //endif ---#ifdef CONFIG_SDMMC_RK29
-
-#ifdef CONFIG_SDMMC0_RK29
-static int rk29_sdmmc0_cfg_gpio(void)
-{
- rk29_sdmmc_set_iomux(0, 0xFFFF);
-
- rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_MMC0_DETN);
-
-#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
- gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
- gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
-#endif
-
- return 0;
-}
-
-#define CONFIG_SDMMC0_USE_DMA
-struct rk29_sdmmc_platform_data default_sdmmc0_data = {
- .host_ocr_avail =
- (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
- MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
- MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
- .host_caps =
- (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .io_init = rk29_sdmmc0_cfg_gpio,
-
-#if !defined(CONFIG_SDMMC_RK29_OLD)
- .set_iomux = rk29_sdmmc_set_iomux,
-#endif
-
- .dma_name = "sd_mmc",
-#ifdef CONFIG_SDMMC0_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
- .detect_irq = RK2928_PIN1_PC1, // INVALID_GPIO
- .enable_sd_wakeup = 0,
-
-#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
- .write_prt = SDMMC0_WRITE_PROTECT_PIN,
-#else
- .write_prt = INVALID_GPIO,
-#endif
-};
-#endif // CONFIG_SDMMC0_RK29
-
-#ifdef CONFIG_SDMMC1_RK29
-#define CONFIG_SDMMC1_USE_DMA
-static int rk29_sdmmc1_cfg_gpio(void)
-{
-#if defined(CONFIG_SDMMC_RK29_OLD)
- rk30_mux_api_set(GPIO0B0_MMC1_CMD_NAME, GPIO0B_MMC1_CMD);
- rk30_mux_api_set(GPIO0B1_MMC1_CLKOUT_NAME, GPIO0B_MMC1_CLKOUT);
- rk30_mux_api_set(GPIO0B3_MMC1_D0_NAME, GPIO0B_MMC1_D0);
- rk30_mux_api_set(GPIO0B4_MMC1_D1_NAME, GPIO0B_MMC1_D1);
- rk30_mux_api_set(GPIO0B5_MMC1_D2_NAME, GPIO0B_MMC1_D2);
- rk30_mux_api_set(GPIO0B6_MMC1_D3_NAME, GPIO0B_MMC1_D3);
- //rk30_mux_api_set(GPIO0B2_MMC1_DETN_NAME, GPIO0B_MMC1_DETN);
-
-#else
-
-#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
- gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
- gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
-#endif
-
-#endif
-
- return 0;
-}
-
-struct rk29_sdmmc_platform_data default_sdmmc1_data = {
- .host_ocr_avail =
- (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
- MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
- MMC_VDD_33_34),
-
-#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
- .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-#else
- .host_caps =
- (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-#endif
-
- .io_init = rk29_sdmmc1_cfg_gpio,
-
-#if !defined(CONFIG_SDMMC_RK29_OLD)
- .set_iomux = rk29_sdmmc_set_iomux,
-#endif
-
- .dma_name = "sdio",
-#ifdef CONFIG_SDMMC1_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
-
-#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- .status = rk29sdk_wifi_status,
- .register_status_notify = rk29sdk_wifi_status_register,
-#endif
-#if 0
- .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
-#endif
-
-#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
- .write_prt = SDMMC1_WRITE_PROTECT_PIN,
-#else
- .write_prt = INVALID_GPIO,
-#endif
-
-#else
- .detect_irq = INVALID_GPIO,
- .enable_sd_wakeup = 0,
-#endif
-
-};
-#endif //endif--#ifdef CONFIG_SDMMC1_RK29
-
-/**************************************************************************************************
- * the end of setting for SDMMC devices
-**************************************************************************************************/
-
-
-
-#ifdef CONFIG_RFKILL_RK
-// bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c
-static struct rfkill_rk_platform_data rfkill_rk_platdata = {
- .type = RFKILL_TYPE_BLUETOOTH,
-
- .poweron_gpio = { // BT_REG_ON
- .io = INVALID_GPIO,
- .enable = GPIO_HIGH,
- .iomux = {
- .name = NULL,
- },
- },
-
- .reset_gpio = { // BT_RST
- .io = RK2928_PIN3_PD5, // set io to INVALID_GPIO for disable it
- .enable = GPIO_LOW,
- .iomux = {
- .name = NULL,
- },
- },
-
- .wake_gpio = { // BT_WAKE, use to control bt's sleep and wakeup
- .io = RK2928_PIN0_PC6, // set io to INVALID_GPIO for disable it
- .enable = GPIO_HIGH,
- .iomux = {
- .name = NULL,
- },
- },
-
- .wake_host_irq = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep
- .gpio = {
- .io = RK2928_PIN0_PC5, // set io to INVALID_GPIO for disable it
- .enable = GPIO_LOW, // set GPIO_LOW for falling, set 0 for rising
- .iomux = {
- .name = NULL,
- },
- },
- },
-
- .rts_gpio = { // UART_RTS, enable or disable BT's data coming
- .io = RK2928_PIN0_PC3, // set io to INVALID_GPIO for disable it
- .enable = GPIO_LOW,
- .iomux = {
- .name = GPIO0C3_UART0_CTSN_NAME,
- .fgpio = GPIO0C_GPIO0C3,
- .fmux = GPIO0C_UART0_CTSN,
- },
- },
-};
-
-static struct platform_device device_rfkill_rk = {
- .name = "rfkill_rk",
- .id = -1,
- .dev = {
- .platform_data = &rfkill_rk_platdata,
- },
-};
-#endif
-
-#ifdef CONFIG_SND_SOC_RK2928
-static struct resource resources_acodec[] = {
- {
- .start = RK2928_ACODEC_PHYS,
- .end = RK2928_ACODEC_PHYS + RK2928_ACODEC_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = RK2928_PIN3_PD4,
- .end = RK2928_PIN3_PD4,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct platform_device device_acodec = {
- .name = "rk2928-codec",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_acodec),
- .resource = resources_acodec,
-};
-#endif
-
-#if defined(CONFIG_GPS_RK)
-int rk_gps_io_init(void)
-{
- printk("%s \n", __FUNCTION__);
- rk30_mux_api_set(GPIO1B1_SPI_TXD_UART1_SOUT_NAME, GPIO1B_GPIO1B1);//VCC_EN
- gpio_request(RK2928_PIN1_PB1, NULL);
- gpio_direction_output(RK2928_PIN1_PB1, GPIO_LOW);
-
- rk30_mux_api_set(GPIO1A2_I2S_LRCKRX_GPS_CLK_NAME, GPIO1A_GPS_CLK);//GPS_CLK
- rk30_mux_api_set(GPIO1A4_I2S_SDO_GPS_MAG_NAME, GPIO1A_GPS_MAG);//GPS_MAG
- rk30_mux_api_set(GPIO1A5_I2S_SDI_GPS_SIGN_NAME, GPIO1A_GPS_SIGN);//GPS_SIGN
-
- rk30_mux_api_set(GPIO1B0_SPI_CLK_UART1_CTSN_NAME, GPIO1B_GPIO1B0);//SPI_CLK
- gpio_request(RK2928_PIN1_PB0, NULL);
- gpio_direction_output(RK2928_PIN1_PB0, GPIO_LOW);
-
- rk30_mux_api_set(GPIO1B2_SPI_RXD_UART1_SIN_NAME, GPIO1B_GPIO1B2);//SPI_MOSI
- gpio_request(RK2928_PIN1_PB2, NULL);
- gpio_direction_output(RK2928_PIN1_PB2, GPIO_LOW);
-
- rk30_mux_api_set(GPIO1B3_SPI_CSN0_UART1_RTSN_NAME, GPIO1B_GPIO1B3);//SPI_CS
- gpio_request(RK2928_PIN1_PB3, NULL);
- gpio_direction_output(RK2928_PIN1_PB3, GPIO_LOW);
- return 0;
-}
-int rk_gps_power_up(void)
-{
- printk("%s \n", __FUNCTION__);
-
- return 0;
-}
-
-int rk_gps_power_down(void)
-{
- printk("%s \n", __FUNCTION__);
-
- return 0;
-}
-
-int rk_gps_reset_set(int level)
-{
- return 0;
-}
-int rk_enable_hclk_gps(void)
-{
- printk("%s \n", __FUNCTION__);
- clk_enable(clk_get(NULL, "aclk_gps"));
- return 0;
-}
-int rk_disable_hclk_gps(void)
-{
- printk("%s \n", __FUNCTION__);
- clk_disable(clk_get(NULL, "aclk_gps"));
- return 0;
-}
-struct rk_gps_data rk_gps_info = {
- .io_init = rk_gps_io_init,
- .power_up = rk_gps_power_up,
- .power_down = rk_gps_power_down,
- .reset = rk_gps_reset_set,
- .enable_hclk_gps = rk_enable_hclk_gps,
- .disable_hclk_gps = rk_disable_hclk_gps,
- .GpsSign = RK2928_PIN1_PA5,
- .GpsMag = RK2928_PIN1_PA4, //GPIO index
- .GpsClk = RK2928_PIN1_PA2, //GPIO index
- .GpsVCCEn = RK2928_PIN1_PB1, //GPIO index
- .GpsSpi_CSO = RK2928_PIN1_PB3, //GPIO index
- .GpsSpiClk = RK2928_PIN1_PB0, //GPIO index
- .GpsSpiMOSI = RK2928_PIN1_PB2, //GPIO index
- .GpsIrq = IRQ_GPS,
- .GpsSpiEn = 1,
- .GpsAdcCh = 2,
- .u32GpsPhyAddr = RK2928_GPS_PHYS,
- .u32GpsPhySize = RK2928_GPS_SIZE,
-};
-
-struct platform_device rk_device_gps = {
- .name = "gps_hv5820b",
- .id = -1,
- .dev = {
- .platform_data = &rk_gps_info,
- }
- };
-#endif
-
-
-static struct platform_device *devices[] __initdata = {
-#ifdef CONFIG_FB_ROCKCHIP
- &device_fb,
-#endif
-#ifdef CONFIG_LCDC_RK2928
- &device_lcdc,
-#endif
-#ifdef CONFIG_BACKLIGHT_RK29_BL
- &rk29_device_backlight,
-#endif
-#ifdef CONFIG_ION
- &device_ion,
-#endif
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- &rk29sdk_wifi_device,
-#endif
-#ifdef CONFIG_RFKILL_RK
- &device_rfkill_rk,
-#endif
-#ifdef CONFIG_SND_SOC_RK2928
- &device_acodec,
-#endif
-#ifdef CONFIG_GPS_RK
- &rk_device_gps,
-#endif
-
-};
-//i2c
-#ifdef CONFIG_I2C0_RK30
-static struct i2c_board_info __initdata i2c0_info[] = {
-#if defined (CONFIG_GS_MMA8452)
- {
- .type = "gs_mma8452",
- .addr = 0x1d,
- .flags = 0,
- .irq = RK2928_PIN3_PD1,
- .platform_data = &mma8452_info,
- },
-#endif
-#if defined (CONFIG_COMPASS_AK8975)
- {
- .type = "ak8975",
- .addr = 0x0d,
- .flags = 0,
- .irq = RK2928_PIN3_PD2,
- .platform_data = &akm8975_info,
- },
-#endif
-#if defined (CONFIG_GYRO_L3G4200D)
- {
- .type = "l3g4200d_gryo",
- .addr = 0x69,
- .flags = 0,
- .irq = RK2928_PIN3_PD3,
- .platform_data = &l3g4200d_info,
- },
-#endif
-};
-#endif
-#ifdef CONFIG_I2C1_RK30
-#ifdef CONFIG_MFD_TPS65910
-#define TPS65910_HOST_IRQ RK2928_PIN3_PC6
-#include "board-rk2928-sdk-tps65910.c"
-#endif
-static struct i2c_board_info __initdata i2c1_info[] = {
-
-#if defined (CONFIG_MFD_TPS65910)
- {
- .type = "tps65910",
- .addr = TPS65910_I2C_ID0,
- .flags = 0,
- .irq = TPS65910_HOST_IRQ,
- .platform_data = &tps65910_data,
- },
-#endif
-
-};
-#endif
-#ifdef CONFIG_I2C2_RK30
-static struct i2c_board_info __initdata i2c2_info[] = {
-#if defined (CONFIG_EETI_EGALAX)
- {
- .type = "egalax_i2c",
- .addr = 0x04,
- .flags = 0,
- .irq = RK2928_PIN3_PC7,
- .platform_data = &eeti_egalax_info,
- },
-#endif
-#if defined (CONFIG_LS_CM3217)
- {
- .type = "lightsensor",
- .addr = 0x10,
- .flags = 0,
- .platform_data = &cm3217_info,
- },
-#endif
-};
-#endif
-#ifdef CONFIG_I2C3_RK30
-static struct i2c_board_info __initdata i2c3_info[] = {
-};
-#endif
-#ifdef CONFIG_I2C_GPIO_RK30
-#define I2C_SDA_PIN INVALID_GPIO //set sda_pin here
-#define I2C_SCL_PIN INVALID_GPIO //set scl_pin here
-static int rk30_i2c_io_init(void)
-{
- //set iomux (gpio) here
-
- return 0;
-}
-struct i2c_gpio_platform_data default_i2c_gpio_data = {
- .sda_pin = I2C_SDA_PIN,
- .scl_pin = I2C_SCL_PIN,
- .udelay = 5, // clk = 500/udelay = 100Khz
- .timeout = 100,//msecs_to_jiffies(100),
- .bus_num = 5,
- .io_init = rk30_i2c_io_init,
-};
-static struct i2c_board_info __initdata i2c_gpio_info[] = {
-};
-#endif
-static void __init rk30_i2c_register_board_info(void)
-{
-#ifdef CONFIG_I2C0_RK30
- i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
-#endif
-#ifdef CONFIG_I2C1_RK30
- i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
-#endif
-#ifdef CONFIG_I2C2_RK30
- i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
-#endif
-#ifdef CONFIG_I2C3_RK30
- i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
-#endif
-#ifdef CONFIG_I2C_GPIO_RK30
- i2c_register_board_info(4, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
-#endif
-}
-//end of i2c
-
-#define POWER_ON_PIN RK2928_PIN3_PC5 //power_hold
-static void rk2928_pm_power_off(void)
-{
- printk(KERN_ERR "rk2928_pm_power_off start...\n");
-
- #if defined(CONFIG_MFD_TPS65910)
- tps65910_device_shutdown();//tps65910 shutdown
- #endif
- gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
-
-};
-
-static void __init rk2928_board_init(void)
-{
- gpio_request(POWER_ON_PIN, "poweronpin");
- gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
- gpio_free(POWER_ON_PIN);
-
- pm_power_off = rk2928_pm_power_off;
-
- rk30_i2c_register_board_info();
- spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
- platform_add_devices(devices, ARRAY_SIZE(devices));
- //RK2928 USB DETECT IRQ: IRQ_OTG_BVALID
- //board_usb_detect_init(RK30_PIN6_PA3);
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- rk29sdk_wifi_bt_gpio_control_init();
-#endif
-}
-
-static void __init rk2928_reserve(void)
-{
-#ifdef CONFIG_ION
- rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
-#endif
-#ifdef CONFIG_FB_ROCKCHIP
- resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE);
- resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1;
-#if 0
- resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
- resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
- resource_fb[2].start = board_mem_reserve_add("fb2", RK30_FB0_MEM_SIZE);
- resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1;
-#endif
-#endif
-#ifdef CONFIG_VIDEO_RK29
- rk30_camera_request_reserve_mem();
-#endif
-
-#ifdef CONFIG_GPS_RK
- //it must be more than 8MB
- rk_gps_info.u32MemoryPhyAddr = board_mem_reserve_add("gps", SZ_8M);
-#endif
-
- board_mem_reserved();
-}
-/**
- * dvfs_cpu_logic_table: table for arm and logic dvfs
- * @frequency : arm frequency
- * @cpu_volt : arm voltage depend on frequency
- * @logic_volt : logic voltage arm requests depend on frequency
- * comments : min arm/logic voltage
- */
-static struct dvfs_arm_table dvfs_cpu_logic_table[] = {
- {.frequency = 216 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 312 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 408 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 504 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 600 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 696 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 816 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 912 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
-#if 0
- {.frequency = 1008 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 1200 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = 1248 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
-#endif
- //{.frequency = 1000 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000},
- {.frequency = CPUFREQ_TABLE_END},
-};
-
-static struct cpufreq_frequency_table dvfs_gpu_table[] = {
- {.frequency = 266 * 1000, .index = 1050 * 1000},
- {.frequency = 400 * 1000, .index = 1275 * 1000},
- {.frequency = CPUFREQ_TABLE_END},
-};
-
-static struct cpufreq_frequency_table dvfs_ddr_table[] = {
- {.frequency = 300 * 1000, .index = 1050 * 1000},
- {.frequency = 400 * 1000, .index = 1125 * 1000},
- {.frequency = CPUFREQ_TABLE_END},
-};
-
-#define DVFS_CPU_TABLE_SIZE (ARRAY_SIZE(dvfs_cpu_logic_table))
-static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE];
-static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE];
-
-void __init board_clock_init(void)
-{
- rk2928_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
- dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);
- dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
- //dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
- printk("%s end\n", __func__);
-}
-
-
-MACHINE_START(RK2928, "RK2928board")
- .boot_params = PLAT_PHYS_OFFSET + 0x800,
- .fixup = rk2928_fixup,
- .reserve = &rk2928_reserve,
- .map_io = rk2928_map_io,
- .init_irq = rk2928_init_irq,
- .timer = &rk2928_timer,
- .init_machine = rk2928_board_init,
-MACHINE_END
+/* arch/arm/mach-rk2928/board-rk2928-fpga.c
+ *
+ * Copyright (C) 2012 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/spi/spi.h>
+#include <linux/mmc/host.h>
+#include <linux/ion.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/hardware/gic.h>
+#include <mach/dvfs.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+#include <linux/fb.h>
+#include <linux/regulator/machine.h>
+#include <linux/rfkill-rk.h>
+#include <linux/sensor-dev.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/regulator/act8931.h>
+#include <linux/regulator/rk29-pwm-regulator.h>
+#if defined(CONFIG_HDMI_RK30)
+ #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
+#endif
+
+#if defined(CONFIG_SPIM_RK29)
+#include "../../../drivers/spi/rk29_spim.h"
+#endif
+
+#include "board-rk2928-sdk-camera.c"
+#include "board-rk2928-sdk-key.c"
+
+int __sramdata g_pmic_type = 0;
+#define PMIC_TYPE_TPS65910 2
+#define PMIC_TYPE_ACT8931 3
+
+#ifdef CONFIG_THREE_FB_BUFFER
+#define RK30_FB0_MEM_SIZE 12*SZ_1M
+#else
+#define RK30_FB0_MEM_SIZE 8*SZ_1M
+#endif
+
+static struct spi_board_info board_spi_devices[] = {
+};
+
+/***********************************************************
+* rk30 backlight
+************************************************************/
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+#define PWM_ID 0
+#define PWM_MUX_NAME GPIO0D2_PWM_0_NAME
+#define PWM_MUX_MODE GPIO0D_PWM_0
+#define PWM_MUX_MODE_GPIO GPIO0D_GPIO0D2
+#define PWM_GPIO RK2928_PIN0_PD2
+#define PWM_EFFECT_VALUE 0
+
+#define LCD_DISP_ON_PIN
+
+#ifdef LCD_DISP_ON_PIN
+
+#define BL_EN_PIN RK2928_PIN3_PC5
+#define BL_EN_VALUE GPIO_HIGH
+#endif
+static int rk29_backlight_io_init(void)
+{
+ int ret = 0;
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+#ifdef LCD_DISP_ON_PIN
+ // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
+
+ ret = gpio_request(BL_EN_PIN, NULL);
+ if (ret != 0) {
+ gpio_free(BL_EN_PIN);
+ }
+
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return ret;
+}
+
+static int rk29_backlight_io_deinit(void)
+{
+ int ret = 0;
+#ifdef LCD_DISP_ON_PIN
+ gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
+ gpio_free(BL_EN_PIN);
+#endif
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ return ret;
+}
+
+static int rk29_backlight_pwm_suspend(void)
+{
+ int ret = 0;
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ if (gpio_request(PWM_GPIO, NULL)) {
+ printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
+ return -1;
+ }
+ #if defined(CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ {
+ gpio_direction_output(PWM_GPIO, GPIO_LOW);
+ }
+ #endif
+ #if defined(CONFIG_REGULATOR_ACT8931)
+ if(g_pmic_type == PMIC_TYPE_ACT8931)
+ {
+ gpio_direction_output(PWM_GPIO, GPIO_HIGH);
+ }
+ #endif
+#ifdef LCD_DISP_ON_PIN
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
+#endif
+
+ return ret;
+}
+
+static int rk29_backlight_pwm_resume(void)
+{
+ gpio_free(PWM_GPIO);
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+#ifdef LCD_DISP_ON_PIN
+ msleep(30);
+ gpio_direction_output(BL_EN_PIN, 1);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return 0;
+}
+
+static struct rk29_bl_info rk29_bl_info = {
+ .pwm_id = PWM_ID,
+ .min_brightness = 80,
+ .bl_ref = PWM_EFFECT_VALUE,
+ .io_init = rk29_backlight_io_init,
+ .io_deinit = rk29_backlight_io_deinit,
+ .pwm_suspend = rk29_backlight_pwm_suspend,
+ .pwm_resume = rk29_backlight_pwm_resume,
+};
+
+static struct platform_device rk29_device_backlight = {
+ .name = "rk29_backlight",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_bl_info,
+ }
+};
+
+#endif
+
+#ifdef CONFIG_FB_ROCKCHIP
+
+#define LCD_MUX_NAME GPIO0C2_UART0_RTSN_NAME
+#define LCD_GPIO_MODE GPIO0C_GPIO0C2
+
+#define LCD_EN RK2928_PIN3_PB3
+#define LCD_EN_VALUE GPIO_LOW
+
+static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
+{
+ int ret = 0;
+
+ rk30_mux_api_set(LCD_MUX_NAME, LCD_GPIO_MODE);
+
+ ret = gpio_request(LCD_EN, NULL);
+ if (ret != 0)
+ {
+ gpio_free(LCD_EN);
+ printk(KERN_ERR "request lcd en pin fail!\n");
+ return -1;
+ }
+ else
+ {
+ gpio_direction_output(LCD_EN, LCD_EN_VALUE); //disable
+ }
+ return 0;
+}
+static int rk_fb_io_disable(void)
+{
+
+ #if 0//defined(CONFIG_REGULATOR_ACT8931)
+ if(g_pmic_type == PMIC_TYPE_ACT8931)
+ {
+ struct regulator *ldo;
+ ldo = regulator_get(NULL, "act_ldo4"); //vcc_lcd
+ regulator_disable(ldo);
+ regulator_put(ldo);
+ udelay(100);
+ }
+ #endif
+ gpio_set_value(LCD_EN, !LCD_EN_VALUE);
+ return 0;
+}
+static int rk_fb_io_enable(void)
+{
+ #if 0//defined(CONFIG_REGULATOR_ACT8931)
+ if(g_pmic_type == PMIC_TYPE_ACT8931)
+ {
+ struct regulator *ldo;
+ ldo = regulator_get(NULL, "act_ldo4"); //vcc_lcd
+ regulator_enable(ldo);
+ regulator_put(ldo);
+ udelay(100);
+ msleep(300); // wait for powering on LED circuit
+ }
+ #endif
+
+ gpio_set_value(LCD_EN, LCD_EN_VALUE);
+ return 0;
+}
+
+#if defined(CONFIG_LCDC_RK2928)
+struct rk29fb_info lcdc_screen_info = {
+ .prop = PRMRY, //primary display device
+ .io_init = rk_fb_io_init,
+ .io_disable = rk_fb_io_disable,
+ .io_enable = rk_fb_io_enable,
+ .set_screen_info = set_lcd_info,
+};
+#endif
+
+static struct resource resource_fb[] = {
+ [0] = {
+ .name = "fb0 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "ipp buf", //for rotate
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "fb2 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device device_fb = {
+ .name = "rk-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resource_fb),
+ .resource = resource_fb,
+};
+#endif
+
+//LCDC
+#ifdef CONFIG_LCDC_RK2928
+static struct resource resource_lcdc[] = {
+ [0] = {
+ .name = "lcdc reg",
+ .start = RK2928_LCDC_PHYS,
+ .end = RK2928_LCDC_PHYS + RK2928_LCDC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .name = "lcdc irq",
+ .start = IRQ_LCDC,
+ .end = IRQ_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc = {
+ .name = "rk2928-lcdc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(resource_lcdc),
+ .resource = resource_lcdc,
+ .dev = {
+ .platform_data = &lcdc_screen_info,
+ },
+};
+#endif
+
+#ifdef CONFIG_ION
+#define ION_RESERVE_SIZE (80 * SZ_1M)
+static struct ion_platform_data rk30_ion_pdata = {
+ .nr = 1,
+ .heaps = {
+ {
+ .type = ION_HEAP_TYPE_CARVEOUT,
+ .id = ION_NOR_HEAP_ID,
+ .name = "norheap",
+ .size = ION_RESERVE_SIZE,
+ }
+ },
+};
+
+static struct platform_device device_ion = {
+ .name = "ion-rockchip",
+ .id = 0,
+ .dev = {
+ .platform_data = &rk30_ion_pdata,
+ },
+};
+#endif
+
+#if defined (CONFIG_TOUCHSCREEN_GT811_IIC)
+#define TOUCH_RESET_PIN RK2928_PIN3_PC3
+#define TOUCH_INT_PIN RK2928_PIN3_PC7
+int gt811_init_platform_hw(void)
+{
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("gt811_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("gt811_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ //gpio_pull_updown(TOUCH_INT_PIN, 1);
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ msleep(500);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ msleep(500);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ mdelay(100);
+
+ return 0;
+}
+
+
+static struct goodix_platform_data gt811_info = {
+ .model= 811,
+ .init_platform_hw= gt811_init_platform_hw,
+
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_SITRONIX_A720)
+
+#define TOUCH_RESET_PIN RK2928_PIN1_PA3
+#define TOUCH_INT_PIN RK2928_PIN1_PB3
+int ft5306_init_platform_hw(void)
+{
+
+ //printk("ft5306_init_platform_hw\n");
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("ft5306_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("ift5306_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_direction_output(TOUCH_RESET_PIN, GPIO_HIGH);
+ mdelay(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ mdelay(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(300);
+ return 0;
+
+}
+
+struct ft5x0x_platform_data sitronix_info = {
+ .model = 5007,
+ .init_platform_hw= ft5306_init_platform_hw,
+};
+#endif
+
+
+
+/*MMA7660 gsensor*/
+#if defined (CONFIG_GS_MMA7660)
+#define MMA7660_INT_PIN RK2928_PIN3_PD1
+
+static int mma7660_init_platform_hw(void)
+{
+ rk30_mux_api_set(GPIO1B1_SPI_TXD_UART1_SOUT_NAME, GPIO1B_GPIO1B1);
+
+ return 0;
+}
+
+static struct sensor_platform_data mma7660_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = mma7660_init_platform_hw,
+ .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
+};
+#endif
+
+
+#if CONFIG_RK30_PWM_REGULATOR
+static int pwm_voltage_map[] = {
+ 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000
+};
+
+static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
+ {
+ .supply = "vdd_core",
+ }
+};
+
+struct regulator_init_data pwm_regulator_init_dcdc[1] =
+{
+ {
+ .constraints = {
+ .name = "PWM_DCDC1",
+ .min_uV = 600000,
+ .max_uV = 1800000, //0.6-1.8V
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
+ .consumer_supplies = pwm_dcdc1_consumers,
+ },
+};
+
+static struct pwm_platform_data pwm_regulator_info[1] = {
+ {
+ .pwm_id = 2,
+ .pwm_gpio = RK2928_PIN0_PD4,
+ .pwm_iomux_name = GPIO0D4_PWM_2_NAME,
+ .pwm_iomux_pwm = GPIO0D_PWM_2,
+ .pwm_iomux_gpio = GPIO0D_GPIO0D4,
+ .pwm_voltage = 1200000,
+ .suspend_voltage = 1050000,
+ .min_uV = 1000000,
+ .max_uV = 1400000,
+ .coefficient = 455, //45.5%
+ .pwm_voltage_map = pwm_voltage_map,
+ .init_data = &pwm_regulator_init_dcdc[0],
+ },
+};
+
+struct platform_device pwm_regulator_device[1] = {
+ {
+ .name = "pwm-voltage-regulator",
+ .id = 0,
+ .dev = {
+ .platform_data = &pwm_regulator_info[0],
+ }
+ },
+};
+#endif
+
+/***********************************************************
+* usb wifi
+************************************************************/
+#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU)
+
+static void rkusb_wifi_power(int on) {
+ struct regulator *ldo = NULL;
+
+#if defined(CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910) {
+ ldo = regulator_get(NULL, "vmmc"); //vccio_wl
+ }
+#endif
+#if defined(CONFIG_REGULATOR_ACT8931)
+ if(g_pmic_type == PMIC_TYPE_ACT8931) {
+ ldo = regulator_get(NULL, "act_ldo4"); //vccio_wl
+ }
+#endif
+
+ if(on) {
+ regulator_enable(ldo);
+ printk("%s: vccio_wl enable\n", __func__);
+ } else {
+ printk("%s: vccio_wl disable\n", __func__);
+ regulator_disable(ldo);
+ }
+
+ regulator_put(ldo);
+ udelay(100);
+}
+
+#endif
+
+/**************************************************************************************************
+ * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
+**************************************************************************************************/
+#ifdef CONFIG_SDMMC_RK29
+#include "board-rk2928-sdk-sdmmc.c"
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+#define SDMMC0_WRITE_PROTECT_PIN RK2928_PIN1_PA7 //According to your own project to set the value of write-protect-pin.
+#endif
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+#define SDMMC1_WRITE_PROTECT_PIN RK2928_PIN0_PD5 //According to your own project to set the value of write-protect-pin.
+#endif
+
+#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK2928_PIN0_PB2
+
+#define RK29SDK_SD_CARD_DETECT_N RK2928_PIN2_PA7 //According to your own project to set the value of card-detect-pin.
+#define RK29SDK_SD_CARD_INSERT_LEVEL GPIO_LOW // set the voltage of insert-card. Please pay attention to the default setting.
+
+
+#endif //endif ---#ifdef CONFIG_SDMMC_RK29
+
+#ifdef CONFIG_SDMMC0_RK29
+static int rk29_sdmmc0_cfg_gpio(void)
+{
+ rk29_sdmmc_set_iomux(0, 0xFFFF);
+
+#if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+ rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_GPIO1C1);
+ // gpio_request(RK29SDK_SD_CARD_DETECT_N, "sd-detect");
+ // gpio_direction_output(RK29SDK_SD_CARD_DETECT_N,GPIO_HIGH);//set mmc0-data1 to high.
+#else
+ rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_MMC0_DETN);
+#endif
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
+ gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
+#endif
+
+ return 0;
+}
+
+#define CONFIG_SDMMC0_USE_DMA
+struct rk29_sdmmc_platform_data default_sdmmc0_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .io_init = rk29_sdmmc0_cfg_gpio,
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+ .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+
+ .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+
+#if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+ .detect_irq = RK29SDK_SD_CARD_DETECT_N,
+ .insert_card_level = RK29SDK_SD_CARD_INSERT_LEVEL,
+#else
+ .detect_irq = INVALID_GPIO,
+#endif
+
+ .enable_sd_wakeup = 0,
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC0_WRITE_PROTECT_PIN,
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+};
+#endif // CONFIG_SDMMC0_RK29
+
+#ifdef CONFIG_SND_SOC_RK2928
+static struct resource resources_acodec[] = {
+ {
+ .start = RK2928_ACODEC_PHYS,
+ .end = RK2928_ACODEC_PHYS + RK2928_ACODEC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = RK2928_PIN3_PD4,
+ .end = RK2928_PIN3_PD4,
+ .flags = IORESOURCE_IO,
+ },
+};
+
+static struct platform_device device_acodec = {
+ .name = "rk2928-codec",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resources_acodec),
+ .resource = resources_acodec,
+};
+#endif
+
+#ifdef CONFIG_BATTERY_RK30_ADC_FAC
+static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = {
+ .dc_det_pin = RK2928_PIN1_PB4,//INVALID_GPIO,
+ .batt_low_pin = INVALID_GPIO,
+ .charge_set_pin = INVALID_GPIO,
+ .charge_ok_pin = RK2928_PIN1_PA0,
+ .dc_det_level = GPIO_LOW,
+ .charge_ok_level = GPIO_HIGH,
+};
+
+static struct platform_device rk30_device_adc_battery = {
+ .name = "rk30-battery",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk30_adc_battery_platdata,
+ },
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+#ifdef CONFIG_FB_ROCKCHIP
+ &device_fb,
+#endif
+#ifdef CONFIG_LCDC_RK2928
+ &device_lcdc,
+#endif
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ &rk29_device_backlight,
+#endif
+#ifdef CONFIG_ION
+ &device_ion,
+#endif
+#ifdef CONFIG_SND_SOC_RK2928
+ &device_acodec,
+#endif
+#ifdef CONFIG_BATTERY_RK30_ADC_FAC
+ &rk30_device_adc_battery,
+#endif
+};
+//i2c
+#ifdef CONFIG_I2C0_RK30
+#ifdef CONFIG_MFD_TPS65910
+#define TPS65910_HOST_IRQ RK2928_PIN1_PB2
+#include "board-rk2928-sdk-tps65910.c"
+#endif
+#ifdef CONFIG_REGULATOR_ACT8931
+#define ACT8931_HOST_IRQ RK2928_PIN3_PC6
+#include "board-rk2928-sdk-act8931.c"
+#endif
+
+static struct i2c_board_info __initdata i2c0_info[] = {
+#if defined (CONFIG_MFD_TPS65910)
+ {
+ .type = "tps65910",
+ .addr = TPS65910_I2C_ID0,
+ .flags = 0,
+ .irq = TPS65910_HOST_IRQ,
+ .platform_data = &tps65910_data,
+ },
+#endif
+#if defined (CONFIG_REGULATOR_ACT8931)
+ {
+ .type = "act8931",
+ .addr = 0x5b,
+ .flags = 0,
+ .irq = ACT8931_HOST_IRQ,
+ .platform_data=&act8931_data,
+ },
+#endif
+#ifdef CONFIG_MACH_RK2926_M713
+#if defined (CONFIG_RTC_HYM8563)
+ {
+ .type = "rtc_hym8563",
+ .addr = 0x51,
+ .flags = 0,
+ .irq = RK2928_PIN1_PA5,
+ },
+#endif
+#endif
+};
+#endif
+
+int __sramdata gpio0d4_iomux,gpio0d4_do,gpio0d4_dir;
+
+#define gpio0_readl(offset) readl_relaxed(RK2928_GPIO0_BASE + offset)
+#define gpio0_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO0_BASE + offset); dsb(); } while (0)
+
+void __sramfunc rk30_pwm_logic_suspend_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+
+// int gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
+ sram_udelay(10000);
+ gpio0d4_iomux = readl_relaxed(GRF_GPIO0D_IOMUX);
+ gpio0d4_do = gpio0_readl(GPIO_SWPORTA_DR);
+ gpio0d4_dir = gpio0_readl(GPIO_SWPORTA_DDR);
+
+ writel_relaxed((gpio0d4_iomux |(1<<24)) & (~(1<<8)), GRF_GPIO0D_IOMUX);
+ gpio0_writel(gpio0d4_dir |(1<<28), GPIO_SWPORTA_DDR);
+ gpio0_writel(gpio0d4_do |(1<<28), GPIO_SWPORTA_DR);
+
+#endif
+}
+void __sramfunc rk30_pwm_logic_resume_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ writel_relaxed((1<<24)|gpio0d4_iomux, GRF_GPIO0D_IOMUX);
+ gpio0_writel(gpio0d4_dir, GPIO_SWPORTA_DDR);
+ gpio0_writel(gpio0d4_do, GPIO_SWPORTA_DR);
+ sram_udelay(10000);
+
+#endif
+
+}
+extern void pwm_suspend_voltage(void);
+extern void pwm_resume_voltage(void);
+void rk30_pwm_suspend_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_suspend_voltage();
+#endif
+}
+void rk30_pwm_resume_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_resume_voltage();
+#endif
+}
+
+void __sramfunc board_pmu_suspend(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ board_pmu_tps65910_suspend();
+ #endif
+}
+void __sramfunc board_pmu_resume(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ board_pmu_tps65910_resume();
+ #endif
+}
+
+#ifdef CONFIG_I2C1_RK30
+static struct i2c_board_info __initdata i2c1_info[] = {
+#if defined (CONFIG_GS_MMA7660)
+ {
+ .type = "gs_mma7660",
+ .addr = 0x4c,
+ .flags = 0,
+ .irq = MMA7660_INT_PIN,
+ .platform_data = &mma7660_info,
+ },
+#endif
+
+};
+#endif
+#ifdef CONFIG_I2C2_RK30
+static struct i2c_board_info __initdata i2c2_info[] = {
+
+#if defined (CONFIG_TOUCHSCREEN_GT811_IIC)
+ {
+ .type = "gt811_ts",
+ .addr = 0x5d,
+ .flags = 0,
+ .irq = TOUCH_INT_PIN,
+ .platform_data = >811_info,
+ },
+#endif
+
+#if defined (CONFIG_TOUCHSCREEN_SITRONIX_A720)
+{
+ .type ="sitronix",
+ .addr = 0x60,
+ .flags = 0,
+ .irq = TOUCH_INT_PIN,
+ .platform_data = &sitronix_info,
+},
+#endif
+};
+#endif
+#ifdef CONFIG_I2C3_RK30
+static struct i2c_board_info __initdata i2c3_info[] = {
+};
+#endif
+#ifdef CONFIG_I2C_GPIO_RK30
+#define I2C_SDA_PIN INVALID_GPIO //set sda_pin here
+#define I2C_SCL_PIN INVALID_GPIO //set scl_pin here
+static int rk30_i2c_io_init(void)
+{
+ //set iomux (gpio) here
+
+ return 0;
+}
+struct i2c_gpio_platform_data default_i2c_gpio_data = {
+ .sda_pin = I2C_SDA_PIN,
+ .scl_pin = I2C_SCL_PIN,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(100),
+ .bus_num = 5,
+ .io_init = rk30_i2c_io_init,
+};
+static struct i2c_board_info __initdata i2c_gpio_info[] = {
+};
+#endif
+static void __init rk30_i2c_register_board_info(void)
+{
+#ifdef CONFIG_I2C0_RK30
+ i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
+#endif
+#ifdef CONFIG_I2C1_RK30
+ i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
+#endif
+#ifdef CONFIG_I2C2_RK30
+ i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
+#endif
+#ifdef CONFIG_I2C3_RK30
+ i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
+#endif
+#ifdef CONFIG_I2C_GPIO_RK30
+ i2c_register_board_info(4, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
+#endif
+}
+//end of i2c
+
+#define POWER_ON_PIN RK2928_PIN1_PA1 //power_hold
+#if defined(CONFIG_REGULATOR_ACT8931)
+extern int act8931_charge_det ;
+#endif
+static void rk2928_pm_power_off(void)
+{
+ printk(KERN_ERR "rk2928_pm_power_off start...\n");
+
+ #if defined(CONFIG_REGULATOR_ACT8931)
+ if(g_pmic_type == PMIC_TYPE_ACT8931)
+ {
+ #ifdef CONFIG_BATTERY_RK30_ADC_FAC
+ if (gpio_get_value (rk30_adc_battery_platdata.dc_det_pin) == rk30_adc_battery_platdata.dc_det_level)//if(act8931_charge_det)
+ #endif
+ arm_pm_restart(0, NULL);
+ }
+ #endif
+
+ #if defined(CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ {
+ tps65910_device_shutdown();//tps65910 shutdown
+ }
+ #endif
+ gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
+
+};
+
+static void __init rk2928_board_init(void)
+{
+ gpio_request(POWER_ON_PIN, "poweronpin");
+ gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
+
+ pm_power_off = rk2928_pm_power_off;
+
+ rk30_i2c_register_board_info();
+ spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+}
+
+static void __init rk2928_reserve(void)
+{
+#ifdef CONFIG_ION
+ rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
+#endif
+#ifdef CONFIG_FB_ROCKCHIP
+ resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE);
+ resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1;
+#endif
+#ifdef CONFIG_VIDEO_RK29
+ rk30_camera_request_reserve_mem();
+#endif
+ board_mem_reserved();
+}
+/**
+ * dvfs_cpu_logic_table: table for arm and logic dvfs
+ * @frequency : arm frequency
+ * @cpu_volt : arm voltage depend on frequency
+ * @logic_volt : logic voltage arm requests depend on frequency
+ * comments : min arm/logic voltage
+ */
+static struct dvfs_arm_table dvfs_cpu_logic_table[] = {
+ {.frequency = 216 * 1000, .cpu_volt = 850 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 312 * 1000, .cpu_volt = 900 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 408 * 1000, .cpu_volt = 950 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 504 * 1000, .cpu_volt = 1000 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 600 * 1000, .cpu_volt = 1100 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 696 * 1000, .cpu_volt = 1175 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 816 * 1000, .cpu_volt = 1250 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 912 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1008 * 1000, .cpu_volt = 1450 * 1000, .logic_volt = 1200 * 1000},
+#if 0
+ {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1200 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1248 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+#endif
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_gpu_table[] = {
+ {.frequency = 266 * 1000, .index = 1050 * 1000},
+ {.frequency = 400 * 1000, .index = 1275 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_ddr_table[] = {
+ {.frequency = 300 * 1000, .index = 1050 * 1000},
+ {.frequency = 400 * 1000, .index = 1125 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+#define DVFS_CPU_TABLE_SIZE (ARRAY_SIZE(dvfs_cpu_logic_table))
+static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE];
+static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE];
+
+void __init board_clock_init(void)
+{
+ rk2928_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
+ dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
+ //dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
+ printk("%s end\n", __func__);
+}
+
+
+MACHINE_START(RK2928, "RK2928board")
+ .boot_params = PLAT_PHYS_OFFSET + 0x800,
+ .fixup = rk2928_fixup,
+ .reserve = &rk2928_reserve,
+ .map_io = rk2928_map_io,
+ .init_irq = rk2928_init_irq,
+ .timer = &rk2928_timer,
+ .init_machine = rk2928_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-rk2928/board-rk2928-tb-camera.c b/arch/arm/mach-rk2928/board-rk2928-tb-camera.c
new file mode 100644
index 000000000000..ad549249f5c2
--- /dev/null
+++ b/arch/arm/mach-rk2928/board-rk2928-tb-camera.c
@@ -0,0 +1,448 @@
+#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Macro Define Begin ------------------------*/
+/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
+#define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5642 /* back camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_0 0x78// 0
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 0
+#define CONFIG_SENSOR_CIF_INDEX_0 0
+#define CONFIG_SENSOR_ORIENTATION_0 90
+#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_0 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_0 30000
+
+#define CONFIG_SENSOR_01 RK29_CAM_SENSOR_OV5642 /* back camera sensor 1 */
+#define CONFIG_SENSOR_IIC_ADDR_01 0x00
+#define CONFIG_SENSOR_CIF_INDEX_01 0
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_01 4
+#define CONFIG_SENSOR_ORIENTATION_01 90
+#define CONFIG_SENSOR_POWER_PIN_01 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_01 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_01 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_01 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_01 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_01 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_01 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_01 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_01 30000
+
+#define CONFIG_SENSOR_02 RK29_CAM_SENSOR_OV5640 /* back camera sensor 2 */
+#define CONFIG_SENSOR_IIC_ADDR_02 0x00
+#define CONFIG_SENSOR_CIF_INDEX_02 0
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_02 4
+#define CONFIG_SENSOR_ORIENTATION_02 90
+#define CONFIG_SENSOR_POWER_PIN_02 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_02 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_02 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_02 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_02 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_02 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_02 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_02 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_02 30000
+
+#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_OV2659 /* front camera sensor 0 */
+#define CONFIG_SENSOR_IIC_ADDR_1 0// 0x60
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 3
+#define CONFIG_SENSOR_CIF_INDEX_1 0
+#define CONFIG_SENSOR_ORIENTATION_1 270
+#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_1 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_1 30000
+
+#define CONFIG_SENSOR_11 RK29_CAM_SENSOR_OV2659 /* front camera sensor 1 */
+#define CONFIG_SENSOR_IIC_ADDR_11 0x00
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_11 3
+#define CONFIG_SENSOR_CIF_INDEX_11 0
+#define CONFIG_SENSOR_ORIENTATION_11 270
+#define CONFIG_SENSOR_POWER_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_FALSH_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_11 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_11 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_11 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_11 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_11 30000
+
+#define CONFIG_SENSOR_12 RK29_CAM_SENSOR_OV2659//RK29_CAM_SENSOR_OV2655 /* front camera sensor 2 */
+#define CONFIG_SENSOR_IIC_ADDR_12 0x00
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_12 3
+#define CONFIG_SENSOR_CIF_INDEX_12 0
+#define CONFIG_SENSOR_ORIENTATION_12 270
+#define CONFIG_SENSOR_POWER_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_FALSH_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_12 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_12 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_12 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_12 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_12 30000
+
+
+#endif //#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Configuration Macro End------------------------*/
+#include "../../../drivers/media/video/rk2928_camera.c"
+/*---------------- Camera Sensor Macro Define End ---------*/
+
+#define PMEM_CAM_SIZE PMEM_CAM_NECESSARY
+/*****************************************************************************************
+ * camera devices
+ * author: ddl@rock-chips.com
+ *****************************************************************************************/
+#ifdef CONFIG_VIDEO_RK29
+#define CONFIG_SENSOR_POWER_IOCTL_USR 0 //define this refer to your board layout
+#define CONFIG_SENSOR_RESET_IOCTL_USR 0
+#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
+#define CONFIG_SENSOR_FLASH_IOCTL_USR 0
+
+static void rk_cif_power(int on)
+{
+ struct regulator *ldo_18,*ldo_28;
+ ldo_28 = regulator_get(NULL, "ldo7"); // vcc28_cif
+ ldo_18 = regulator_get(NULL, "ldo1"); // vcc18_cif
+ if (ldo_28 == NULL || IS_ERR(ldo_28) || ldo_18 == NULL || IS_ERR(ldo_18)){
+ printk("get cif ldo failed!\n");
+ return;
+ }
+ if(on == 0){
+ regulator_disable(ldo_28);
+ regulator_put(ldo_28);
+ regulator_disable(ldo_18);
+ regulator_put(ldo_18);
+ mdelay(500);
+ }
+ else{
+ regulator_set_voltage(ldo_28, 2800000, 2800000);
+ regulator_enable(ldo_28);
+ // printk("%s set ldo7 vcc28_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_28));
+ regulator_put(ldo_28);
+
+ regulator_set_voltage(ldo_18, 1800000, 1800000);
+ // regulator_set_suspend_voltage(ldo, 1800000);
+ regulator_enable(ldo_18);
+ // printk("%s set ldo1 vcc18_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_18));
+ regulator_put(ldo_18);
+ }
+}
+
+#if CONFIG_SENSOR_POWER_IOCTL_USR
+static int sensor_power_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ //#error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
+ rk_cif_power(on);
+}
+#endif
+
+#if CONFIG_SENSOR_RESET_IOCTL_USR
+static int sensor_reset_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_RESET_IOCTL_USR is 1, sensor_reset_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+static int sensor_powerdown_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_POWERDOWN_IOCTL_USR is 1, sensor_powerdown_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_FLASH_IOCTL_USR
+static int sensor_flash_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_FLASH_IOCTL_USR is 1, sensor_flash_usr_cb function must be writed!!";
+}
+#endif
+
+static struct rk29camera_platform_ioctl_cb sensor_ioctl_cb = {
+ #if CONFIG_SENSOR_POWER_IOCTL_USR
+ .sensor_power_cb = sensor_power_usr_cb,
+ #else
+ .sensor_power_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_RESET_IOCTL_USR
+ .sensor_reset_cb = sensor_reset_usr_cb,
+ #else
+ .sensor_reset_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+ .sensor_powerdown_cb = sensor_powerdown_usr_cb,
+ #else
+ .sensor_powerdown_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_FLASH_IOCTL_USR
+ .sensor_flash_cb = sensor_flash_usr_cb,
+ #else
+ .sensor_flash_cb = NULL,
+ #endif
+};
+
+#if CONFIG_SENSOR_IIC_ADDR_0
+static struct reginfo_t rk_init_data_sensor_reg_0[] =
+{
+ {0x0000, 0x00,0,0}
+ };
+static struct reginfo_t rk_init_data_sensor_winseqreg_0[] ={
+ {0x0000, 0x00,0,0}
+ };
+#endif
+
+#if CONFIG_SENSOR_IIC_ADDR_1
+static struct reginfo_t rk_init_data_sensor_reg_1[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_1[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_01
+static struct reginfo_t rk_init_data_sensor_reg_01[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_01[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_02
+static struct reginfo_t rk_init_data_sensor_reg_02[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_02[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_11
+static struct reginfo_t rk_init_data_sensor_reg_11[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_11[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_12
+static struct reginfo_t rk_init_data_sensor_reg_12[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_12[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+static rk_sensor_user_init_data_s rk_init_data_sensor[RK_CAM_NUM] =
+{
+ #if CONFIG_SENSOR_IIC_ADDR_0
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_0,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_0,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_0) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_0) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_1
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_1,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_1,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_1) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_1) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_01
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_01,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_01,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_01) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_01) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_02
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_02,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_02,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_02) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_02) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_11
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_11,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_11,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_11) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_11) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_12
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_12,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_12,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_12) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_12) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+
+ };
+#include "../../../drivers/media/video/rk2928_camera.c"
+
+#endif /* CONFIG_VIDEO_RK29 */
diff --git a/arch/arm/mach-rk2928/board-rk2928-tb.c b/arch/arm/mach-rk2928/board-rk2928-tb.c
index 7c592250152f..51ae93133d71 100755
--- a/arch/arm/mach-rk2928/board-rk2928-tb.c
+++ b/arch/arm/mach-rk2928/board-rk2928-tb.c
@@ -64,8 +64,8 @@
#define RK30_FB0_MEM_SIZE 8*SZ_1M
#endif
-#include "board-rk2928-sdk-camera.c"
-#include "board-rk2928-sdk-key.c"
+#include "board-rk2928-tb-camera.c"
+#include "board-rk2928-tb-key.c"
#if defined (CONFIG_EETI_EGALAX)
#define TOUCH_RESET_PIN RK2928_PIN3_PC3
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 58ef75385191..5e02303f19e1 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -969,6 +969,10 @@ config LAIBAO_TS
config TOUCHSCREEN_GT801_IIC
tristate "GT801_IIC based touchscreens"
depends on I2C2_RK29
+
+config TOUCHSCREEN_GT811_IIC
+ tristate "GT811_IIC based touchscreens"
+ depends on I2C2_RK29 || I2C2_RK30
config TOUCHSCREEN_GT82X_IIC
tristate "GT82x_IIC based touchscreens"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 159f846c813a..b624bdc544a1 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_EETI_EGALAX) += eeti_egalax_i2c.o
obj-$(CONFIG_ATMEL_MXT224) += atmel_maxtouch.o
obj-$(CONFIG_ATMEL_MXT1386) += atmel_mxt1386.o
obj-$(CONFIG_TOUCHSCREEN_GT801_IIC) += gt801_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GT811_IIC) += gt811_ts.o
obj-$(CONFIG_TOUCHSCREEN_GT82X_IIC) += goodix_touch_82x.o
obj-$(CONFIG_TOUCHSCREEN_GT818_IIC) += gt818_ts.o
obj-$(CONFIG_TOUCHSCREEN_GT8110) += gt8110_ts.o
diff --git a/drivers/input/touchscreen/gt811_firmware.h b/drivers/input/touchscreen/gt811_firmware.h
new file mode 100755
index 000000000000..a19bac40959d
--- /dev/null
+++ b/drivers/input/touchscreen/gt811_firmware.h
@@ -0,0 +1,274 @@
+/* drivers/input/touchscreen/gt811_update.h
+ *
+ * Copyright (C) 2010 - 2011 Goodix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ *Any problem,please contact andrew@goodix.com,+86 755-33338828
+ *
+ */
+
+#ifndef _LINUX_GT811_UPDATE_H
+#define _LINUX_GT811_UPDATE_H
+static unsigned char goodix_gt811_firmware[] = {
+ 0x11,
+ 0x10,0x10,
+ 0x45,
+ 0x00,0x00,0x00,
+ 0x41,0x00,
+ 0x0e,0xf0,
+ 0x06,0x24,0xad,
+ 0x00,0x00,0x00,0x00,0x00,0x00,
+ /*'G','O','O','D','I','X',*/
+
+ 0x4f,0xce,0x01,0x00,0x20,0x03,0xa7,0x00,0x08,0x8c,0x05,0xdf,
+ 0x26,0xf8,0x8e,0x05,0xdf,0xbd,0x41,0x16,0x20,0xfe,0x0e,0xbd,0xc2,0xd4,0xbd,0x4d,
+ 0x8c,0xbd,0x4d,0xc2,0xbd,0x41,0xb0,0xbd,0x47,0x61,0xbd,0x46,0x59,0xbd,0xf7,0x38,
+ 0x20,0x10,0x01,0x01,0x01,0x01,0x13,0xe6,0x01,0x08,0xd6,0xeb,0x26,0x04,0x01,0xcf,
+ 0x01,0x01,0xd6,0xeb,0x27,0xec,0xd6,0xe7,0x5c,0x26,0xe7,0xd7,0xeb,0xbd,0x46,0xf4,
+ 0xbd,0xc4,0x73,0xf6,0x07,0x0b,0x27,0x0f,0xbd,0x46,0xf8,0xbd,0x46,0x59,0xc6,0x80,
+ 0xd7,0xea,0xbd,0xf7,0x38,0x20,0xdb,0xbd,0xd4,0xb8,0xd6,0xea,0x5a,0x27,0x08,0xbd,
+ 0xf5,0x3c,0xbd,0xf7,0x38,0x20,0xcb,0x8d,0x64,0xbd,0x4c,0x90,0xbd,0xe9,0xd4,0xbd,
+ 0x4b,0xd7,0xbd,0x49,0x4c,0xbd,0xeb,0xe8,0xbd,0xf7,0x38,0xbd,0x42,0xa9,0xbd,0x47,
+ 0x87,0xbd,0x48,0xde,0xbd,0xd7,0xa2,0xbd,0x4b,0x41,0xbd,0xdb,0x6a,0xbd,0xef,0x1c,
+ 0xbd,0xdf,0x8d,0xbd,0xe3,0x51,0xbd,0xe3,0x71,0xbd,0xd5,0xa8,0xbd,0x4e,0x29,0xbd,
+ 0xef,0x95,0x20,0x8e,0x3c,0x34,0x30,0xbd,0xc7,0x1c,0xc6,0x5d,0x18,0xce,0x14,0x01,
+ 0x18,0xe7,0x00,0xbd,0x46,0x27,0xf7,0x07,0x10,0x56,0x56,0x56,0xc4,0xc0,0xe7,0x00,
+ 0xf6,0x07,0x21,0xc4,0x3f,0xea,0x00,0xf7,0x07,0x21,0x31,0x38,0x39,0xd6,0xef,0x26,
+ 0x1a,0xc6,0x01,0xd7,0xef,0xfe,0x01,0x28,0x3c,0xcc,0x0b,0x00,0xfd,0x01,0x28,0xbd,
+ 0x48,0x38,0xdd,0xf2,0xfd,0x02,0xf7,0x38,0xff,0x01,0x28,0x39,0x3c,0xd6,0xf5,0x26,
+ 0x03,0x7e,0x42,0x86,0xd6,0xac,0x5a,0x26,0x6e,0xfc,0x02,0x89,0x83,0x0d,0x80,0xce,
+ 0x00,0x14,0x02,0x8f,0x37,0xce,0x0b,0xa0,0x18,0xfe,0x01,0x28,0x32,0x81,0x08,0x23,
+ 0x0a,0x80,0x08,0xc6,0xa0,0x3a,0x3a,0x18,0x3a,0x18,0x3a,0xc6,0x14,0x3d,0x3a,0x18,
+ 0x3a,0x5f,0xd7,0x69,0xec,0x00,0x18,0xa3,0x00,0x7d,0x00,0x69,0x26,0x06,0xfd,0x02,
+ 0xfc,0xfd,0x02,0xfe,0x1a,0xb3,0x02,0xfc,0x2f,0x03,0xfd,0x02,0xfc,0x1a,0xb3,0x02,
+ 0xfe,0x2c,0x03,0xfd,0x02,0xfe,0x08,0x08,0x18,0x08,0x18,0x08,0x7c,0x00,0x69,0xd6,
+ 0x69,0xd1,0xc2,0x25,0xcf,0xd6,0xca,0x4f,0xf3,0x02,0xfe,0xb3,0x02,0xfc,0x2d,0x07,
+ 0xf6,0x02,0xf1,0xcb,0x02,0x20,0x06,0xf6,0x02,0xf1,0x27,0x01,0x5a,0xf7,0x02,0xf1,
+ 0xc1,0xfa,0x25,0x06,0xbd,0x49,0x43,0x7f,0x00,0xf5,0x38,0x39,0x3c,0xce,0x07,0x12,
+ 0xc6,0xa0,0xe7,0x00,0x5f,0xce,0x07,0x1d,0xe7,0x00,0x08,0x8c,0x07,0x48,0x23,0xf8,
+ 0xce,0x02,0xc4,0xe7,0x00,0x08,0x8c,0x02,0xec,0x25,0xf8,0x38,0x39,0x7f,0x03,0x33,
+ 0xbd,0xc5,0x25,0x13,0xe6,0x04,0x02,0x8d,0x49,0xbd,0x44,0x46,0xcc,0x01,0xc2,0xd0,
+ 0xda,0x82,0x00,0xd0,0xda,0x82,0x00,0xf3,0x02,0x90,0xfd,0x02,0x90,0x39,0x3c,0x18,
+ 0x3c,0x86,0x14,0xf6,0x03,0x33,0x3d,0xc3,0x0d,0x80,0x18,0x8f,0xce,0x02,0x2c,0xd6,
+ 0xc2,0xd7,0x6a,0xec,0x00,0x13,0xe6,0x40,0x02,0x47,0x56,0x18,0xed,0x00,0xc6,0x02,
+ 0x3a,0x18,0x3a,0x7a,0x00,0x6a,0x26,0xeb,0x4f,0x97,0xd1,0x7c,0x03,0x33,0x18,0x38,
+ 0x38,0x39,0x3c,0x18,0x3c,0xce,0x03,0x34,0x4f,0xc6,0xa0,0xa7,0x00,0x08,0x5a,0x26,
+ 0xfa,0x96,0xc1,0xb7,0x02,0x6f,0x18,0xce,0x0d,0x80,0xce,0x03,0x34,0xd6,0xc2,0xf7,
+ 0x02,0x6e,0x18,0x3c,0x4f,0x5f,0x18,0xe3,0x00,0x18,0x08,0x18,0x08,0x7a,0x02,0x6e,
+ 0x26,0xf4,0xfd,0x03,0x31,0x18,0x38,0x3c,0x4f,0xd6,0xc2,0x8f,0xfc,0x03,0x31,0x2a,
+ 0x0c,0x40,0x50,0x82,0x00,0x02,0x8f,0x40,0x50,0x82,0x00,0x20,0x02,0x02,0x8f,0xfd,
+ 0x03,0x31,0x38,0x96,0xc2,0xb7,0x02,0x6e,0x18,0x3c,0x18,0xec,0x00,0xb3,0x03,0x31,
+ 0x18,0xed,0x00,0x2d,0x04,0x2e,0x0d,0x20,0x18,0x6c,0x01,0x1a,0xa3,0x06,0x2c,0x11,
+ 0xed,0x06,0x20,0x0d,0x6c,0x00,0x1a,0xa3,0x04,0x2f,0x02,0xed,0x04,0xe3,0x02,0xed,
+ 0x02,0x18,0x08,0x18,0x08,0x7a,0x02,0x6e,0x26,0xd0,0x18,0x38,0xc6,0x0a,0x3a,0x58,
+ 0x18,0x3a,0x7a,0x02,0x6f,0x26,0x86,0xce,0x03,0x34,0x96,0xc1,0xb7,0x02,0x6f,0x4a,
+ 0xb7,0x03,0x29,0xb7,0x03,0x2a,0x4f,0xd6,0xc9,0xc0,0x0a,0xa3,0x04,0xe3,0x06,0x2b,
+ 0x15,0xd6,0xc1,0xf0,0x02,0x6f,0xb6,0x03,0x29,0xb1,0x03,0x2a,0x27,0x05,0xf7,0x03,
+ 0x29,0x20,0x03,0xf7,0x03,0x2a,0xc6,0x0a,0x3a,0x7a,0x02,0x6f,0x26,0xd8,0x8d,0x11,
+ 0xf6,0x03,0x29,0xf7,0x03,0x2a,0x8d,0x09,0xbd,0x45,0xff,0x8d,0x3a,0x18,0x38,0x38,
+ 0x39,0x7f,0x03,0x2c,0xf6,0x03,0x2a,0xf7,0x02,0x6f,0xd6,0xc2,0xd7,0x68,0xbd,0x45,
+ 0x1a,0xbd,0x45,0xc2,0x7c,0x02,0x6f,0xf6,0x02,0x6f,0xd1,0xc1,0x26,0xf0,0x7f,0x03,
+ 0x2c,0xf6,0x03,0x2a,0xf7,0x02,0x6f,0xd6,0xc2,0xd7,0x68,0xbd,0x45,0x1a,0xbd,0x45,
+ 0xc2,0x7a,0x02,0x6f,0x2a,0xf5,0x39,0x18,0xce,0x03,0x34,0xce,0x0d,0x80,0x96,0xc1,
+ 0xb7,0x02,0x6f,0x18,0x67,0x08,0x18,0x66,0x09,0x96,0xc2,0xb7,0x02,0x6e,0x3c,0xec,
+ 0x00,0x18,0xe3,0x08,0xed,0x00,0x08,0x08,0x7a,0x02,0x6e,0x26,0xf2,0x38,0xc6,0x0a,
+ 0x18,0x3a,0x58,0x3a,0x7a,0x02,0x6f,0x26,0xda,0x39,0x3c,0x4f,0x5f,0xb7,0x02,0x81,
+ 0xb7,0x02,0x80,0x97,0xe2,0x97,0xe1,0x97,0x68,0x97,0x67,0x18,0xce,0x0d,0x80,0xce,
+ 0x0d,0x80,0xff,0x02,0x89,0xff,0x02,0x87,0xd6,0xc1,0xd7,0x6a,0x3c,0x18,0x3c,0xd6,
+ 0xc2,0xd7,0x69,0x18,0xec,0x00,0x18,0x6f,0x00,0x18,0x6f,0x01,0x4d,0x2a,0x28,0x40,
+ 0x50,0x82,0x00,0x4d,0x27,0x02,0xc6,0xff,0xd1,0xc9,0x23,0x03,0x7c,0x00,0xe1,0xf1,
+ 0x02,0x7f,0x23,0x03,0x7c,0x02,0x80,0x4f,0xa7,0x00,0xf3,0x02,0x90,0xfd,0x02,0x90,
+ 0x86,0x02,0xb7,0x03,0x25,0x20,0x4d,0xd0,0xfb,0x82,0x00,0x2a,0x02,0x4f,0x5f,0x4d,
+ 0x27,0x02,0xc6,0xff,0xd1,0xc9,0x22,0x04,0x86,0x02,0x20,0x04,0x7c,0x00,0xe2,0x4f,
+ 0xb7,0x03,0x25,0xf1,0x02,0x7f,0x23,0x03,0x7c,0x02,0x81,0xe7,0x00,0x4f,0xf3,0x02,
+ 0x90,0xfd,0x02,0x90,0xe6,0x00,0xd1,0x68,0x23,0x11,0x96,0x68,0x97,0x67,0xd7,0x68,
+ 0xfc,0x02,0x89,0xfd,0x02,0x87,0xff,0x02,0x89,0x20,0x09,0xd1,0x67,0x23,0x05,0xd7,
+ 0x67,0xff,0x02,0x87,0x3c,0xc6,0xa0,0x3a,0x3a,0xf6,0x03,0x25,0xe7,0x00,0x38,0x08,
+ 0xc6,0x02,0x18,0x3a,0x7a,0x00,0x69,0x27,0x03,0x7e,0x44,0x6f,0x18,0x38,0x38,0xc6,
+ 0x14,0x3a,0x18,0x3a,0x7a,0x00,0x6a,0x27,0x03,0x7e,0x44,0x68,0x38,0x39,0xce,0x03,
+ 0x34,0xf6,0x02,0x6f,0x86,0x0a,0x3d,0x3a,0xec,0x00,0x3d,0x5d,0xfd,0x03,0x26,0x27,
+ 0x6e,0x86,0x01,0xf6,0x03,0x2c,0x27,0x10,0x5a,0x27,0x18,0x5a,0x27,0x26,0xf6,0x03,
+ 0x2b,0x27,0x05,0x5a,0x27,0x28,0x20,0x08,0xe6,0x00,0xe1,0x01,0x22,0x02,0x20,0x1e,
+ 0x4f,0x20,0x1b,0xf6,0x03,0x2b,0xc1,0x02,0x27,0x14,0xe6,0x00,0xd0,0x68,0xc1,0x04,
+ 0x2e,0xe6,0x20,0x1a,0x4f,0xf6,0x03,0x2b,0xc1,0x01,0x27,0x02,0x20,0x08,0xb7,0x03,
+ 0x28,0x4f,0xd6,0xc2,0x20,0x0e,0xb7,0x03,0x28,0x4f,0xe6,0x00,0x20,0x06,0xb7,0x03,
+ 0x28,0x4f,0xe6,0x01,0xfd,0x03,0x31,0xec,0x02,0x3c,0xfe,0x03,0x31,0x02,0x8f,0x38,
+ 0xfd,0x03,0x26,0x4f,0xf6,0x03,0x28,0x26,0x06,0xb3,0x03,0x26,0xfd,0x03,0x26,0xec,
+ 0x04,0xf3,0x03,0x26,0xfd,0x03,0x2f,0xec,0x06,0xf3,0x03,0x26,0xfd,0x03,0x2d,0xec,
+ 0x08,0xf3,0x03,0x26,0xed,0x08,0xfc,0x03,0x2d,0x47,0x56,0x47,0x56,0xe3,0x08,0xed,
+ 0x08,0xe6,0x00,0xd7,0x68,0x39,0xf6,0x03,0x2c,0xc1,0x03,0x2c,0x03,0xf7,0x03,0x2b,
+ 0x7f,0x03,0x2c,0x4f,0xd6,0xc9,0xc0,0x0a,0x1a,0xb3,0x03,0x2f,0x2c,0x03,0x7c,0x03,
+ 0x2c,0x40,0x50,0x82,0x00,0x1a,0xb3,0x03,0x2d,0x2f,0x06,0x7c,0x03,0x2c,0x7c,0x03,
+ 0x2c,0xf6,0x03,0x2c,0xc1,0x03,0x26,0x0a,0xf6,0x03,0x2b,0x26,0x05,0xc6,0x01,0xf7,
+ 0x03,0x2c,0x39,0x3c,0x18,0x3c,0xce,0x03,0x34,0x18,0xce,0x03,0x05,0xd6,0xc1,0x37,
+ 0xec,0x08,0x18,0xe3,0x00,0x47,0x56,0xed,0x08,0x18,0xed,0x00,0xc6,0x08,0x3a,0x18,
+ 0x08,0x18,0x08,0x33,0x5a,0x26,0xe8,0x18,0x38,0x38,0x39,0x3c,0xce,0x16,0x00,0x1d,
+ 0x00,0x02,0x1c,0x06,0x02,0x1d,0x07,0x02,0xbd,0xef,0x0d,0x1e,0x02,0x02,0x07,0x1d,
+ 0x06,0x02,0xc6,0x02,0x20,0x15,0x1d,0x06,0x02,0x1c,0x07,0x02,0xbd,0xef,0x0d,0x1f,
+ 0x02,0x02,0x07,0x1d,0x07,0x02,0xc6,0x01,0x20,0x01,0x5f,0x38,0x39,0x3c,0x34,0x30,
+ 0xbd,0xc8,0x97,0xd6,0x6a,0x4f,0xc3,0x07,0x92,0x18,0x8f,0xcc,0x42,0xca,0x18,0xed,
+ 0x01,0xbd,0x42,0x88,0x8d,0xb5,0xf7,0x07,0x10,0x56,0x56,0x56,0xc4,0xc0,0xe7,0x00,
+ 0xf6,0x07,0x21,0xc4,0x3f,0xea,0x00,0xf7,0x07,0x21,0x7f,0x02,0xc2,0xcc,0x80,0x00,
+ 0xfd,0x01,0x2e,0xf6,0x06,0xec,0xc4,0x0f,0xd7,0xfb,0x5f,0xd7,0xf5,0xd7,0xf4,0xf7,
+ 0x02,0xfb,0xd7,0xef,0xd7,0xc8,0xd7,0x6a,0x86,0x03,0x3d,0x4f,0xc3,0x03,0xd8,0xfd,
+ 0x03,0xd6,0xbd,0x4d,0x69,0xd6,0x6a,0x86,0x05,0x3d,0x4f,0xc3,0x03,0xe7,0x18,0x8f,
+ 0x18,0x6f,0x04,0x7c,0x00,0x6a,0xd6,0x6a,0xc1,0x05,0x25,0xdc,0xbd,0x48,0x20,0xd6,
+ 0xe6,0xc4,0x30,0xd7,0x68,0x26,0x0d,0xc6,0x0c,0xf7,0x02,0xed,0x5c,0xf7,0x02,0xee,
+ 0xc6,0x0f,0x20,0x09,0xc6,0x0c,0xf7,0x02,0xed,0x5c,0xf7,0x02,0xee,0xf7,0x02,0xef,
+ 0xc6,0x0a,0xf7,0x02,0xf0,0x31,0x38,0x39,0x7f,0x13,0x01,0x39,0xf6,0x07,0x21,0xc4,
+ 0xc0,0xca,0x20,0xf7,0x07,0x21,0xc6,0xf0,0xf7,0x07,0x22,0x5f,0xd7,0xfa,0x8d,0xe8,
+ 0xf6,0x07,0x0b,0x27,0x24,0x7f,0x07,0x0b,0xbd,0xf1,0x9e,0xf6,0x01,0x32,0x5a,0x26,
+ 0x18,0xf6,0x07,0x21,0xc4,0xc0,0xf7,0x07,0x21,0x7f,0x07,0x22,0xbd,0xf1,0x4e,0xfc,
+ 0x01,0x30,0xf7,0x07,0x0c,0xb7,0x07,0x0d,0x39,0x4f,0x5f,0xdd,0x75,0x8d,0xb9,0xbd,
+ 0xef,0x0d,0xf6,0x07,0x0b,0x26,0xce,0xdc,0x75,0xc3,0x00,0x01,0xdd,0x75,0x83,0x07,
+ 0xd0,0x25,0xea,0xd6,0xfa,0x26,0x05,0xbd,0xf7,0xd6,0x20,0x03,0xbd,0xf7,0xed,0xd6,
+ 0xfa,0xc8,0x01,0x20,0xa7,0x7f,0x07,0x11,0xc6,0x02,0xf7,0x06,0x92,0xbd,0xf3,0x11,
+ 0x39,0x39,0xd6,0xf5,0x26,0x0b,0x12,0xec,0x08,0x07,0xc6,0x01,0xd7,0xf5,0xbd,0x48,
+ 0xbc,0x7f,0x02,0xf1,0xbd,0xd2,0x22,0x7f,0x02,0x84,0x39,0xd6,0xcb,0xc5,0x80,0x26,
+ 0x01,0x39,0xbd,0x48,0x38,0x1a,0xb3,0x02,0xf7,0x24,0x03,0xfd,0x02,0xf7,0x37,0xf6,
+ 0x02,0xf9,0x33,0x26,0x03,0xfd,0x02,0xf3,0x1a,0xb3,0x02,0xf3,0x23,0x05,0xb3,0x02,
+ 0xf3,0x20,0x05,0xfc,0x02,0xf3,0x93,0xf0,0x1a,0x83,0x00,0xc8,0x25,0x03,0x8d,0x64,
+ 0x39,0xdc,0xf0,0xd3,0xed,0x24,0x03,0x7c,0x02,0xfa,0xdd,0xed,0xd6,0xac,0xc1,0x02,
+ 0x24,0x04,0x13,0xec,0x02,0x05,0xc6,0x01,0xf7,0x02,0xf2,0x7c,0x02,0xf9,0xf6,0x02,
+ 0xf9,0xc1,0x10,0x26,0x3e,0xc6,0x04,0xd7,0x6a,0xdc,0xed,0x74,0x02,0xfa,0x46,0x56,
+ 0x7a,0x00,0x6a,0x26,0xf6,0xfd,0x02,0xf5,0x93,0xf2,0x24,0x0c,0xdc,0xf2,0xb3,0x02,
+ 0xf5,0x83,0x01,0xf4,0x23,0x02,0x8d,0x2a,0xfc,0x02,0xf7,0x37,0x36,0xfc,0x02,0xf5,
+ 0xbd,0xf7,0xbb,0x31,0x31,0x83,0x00,0xc8,0x24,0x07,0xf6,0x02,0xf2,0x27,0x02,0x8d,
+ 0x11,0x8d,0x01,0x39,0x5f,0xf7,0x02,0xf9,0xf7,0x02,0xfa,0x4f,0xb7,0x02,0xf2,0xdd,
+ 0xed,0x39,0x7f,0x02,0x95,0x7f,0x02,0x94,0xbd,0x49,0x43,0x39,0x3c,0x18,0xfe,0x01,
+ 0x28,0xfe,0x01,0x28,0xc6,0x14,0x3a,0x4f,0x5f,0xdd,0xf0,0xd7,0xbe,0x20,0x66,0xd6,
+ 0xbe,0xc1,0x07,0x26,0x05,0xc6,0xa0,0x3a,0x20,0x08,0xc1,0x08,0x26,0x04,0xc6,0xa0,
+ 0x18,0x3a,0x5f,0xd7,0xbf,0x20,0x3f,0x3c,0x18,0x3c,0x3c,0x18,0x3c,0x3c,0xce,0x06,
+ 0xa2,0xd6,0xbf,0x3a,0xec,0x00,0x38,0x36,0x3a,0x18,0x3a,0xec,0x00,0x18,0xa3,0x00,
+ 0xdd,0xcf,0x33,0x18,0x38,0x38,0x3a,0x18,0x3a,0x18,0xec,0x00,0xa3,0x00,0xd3,0xcf,
+ 0x2a,0x05,0x43,0x53,0xc3,0x00,0x01,0xd3,0xf0,0x24,0x03,0xcc,0xff,0xff,0xdd,0xf0,
+ 0x18,0x38,0x38,0x7c,0x00,0xbf,0xd6,0xc2,0x5a,0xd1,0xbf,0x22,0xba,0xc6,0x14,0x3a,
+ 0x18,0x3a,0x7c,0x00,0xbe,0xd6,0xc0,0x5a,0xd1,0xbe,0x22,0x93,0xdc,0xf0,0x38,0x39,
+ 0x3c,0x18,0x3c,0xce,0x0b,0x00,0x18,0xce,0x0c,0x40,0xec,0x00,0xed,0xa0,0x18,0xec,
+ 0x00,0x18,0xed,0xa0,0xc6,0x02,0x3a,0x18,0x3a,0x8c,0x0b,0xa0,0x25,0xec,0x18,0x38,
+ 0x38,0x39,0x13,0xcb,0x80,0x2a,0xd6,0xe2,0xd1,0xe1,0x22,0x02,0xd6,0xe1,0x86,0x0a,
+ 0x3d,0xdd,0xf0,0xd6,0xda,0x86,0x07,0x3d,0x93,0xf0,0x24,0x05,0xbd,0x47,0x6e,0x20,
+ 0x0f,0xbd,0xce,0x22,0x13,0xec,0x08,0x05,0xbd,0x41,0xf8,0x20,0x03,0x5f,0xd7,0xf5,
+ 0x39,0x3c,0x3c,0x7e,0xce,0x98,0x3c,0x3c,0xbd,0xd0,0x9b,0x13,0xe6,0x02,0x06,0x7c,
+ 0x02,0x8c,0x7c,0x02,0x8b,0xfe,0x02,0x6c,0xe6,0x00,0xd1,0xca,0x25,0x16,0xf6,0x02,
+ 0x8b,0xc1,0x02,0x24,0x07,0xf6,0x02,0x8c,0xc1,0x02,0x25,0x08,0xc6,0x03,0xf7,0x02,
+ 0x8c,0xf7,0x02,0x8b,0x38,0x38,0x39,0xbd,0x48,0x38,0xdd,0xf2,0xbd,0xd1,0x6b,0x39,
+ 0xf6,0x07,0x11,0xf7,0x02,0x75,0xc1,0xc3,0x26,0x06,0x7f,0x07,0x11,0x7e,0xc0,0x00,
+ 0x15,0xe9,0xc0,0xf6,0x06,0x92,0x56,0x56,0x56,0xc4,0xc0,0xda,0xe9,0xd7,0xe9,0xf6,
+ 0x06,0x92,0xc5,0x03,0x26,0x05,0xca,0x02,0xf7,0x06,0x92,0xbd,0xec,0xc3,0xd6,0xb7,
+ 0x27,0x08,0xf6,0x02,0x16,0xca,0x20,0xf7,0x02,0x16,0x8d,0x0a,0xbd,0x4b,0x05,0xbd,
+ 0x4b,0x23,0xbd,0xe8,0xf5,0x39,0x3c,0x3c,0x34,0x30,0x6f,0x02,0xf6,0x01,0xb4,0x5a,
+ 0x27,0x03,0x7e,0x4a,0xbf,0xd6,0xb7,0xf7,0x07,0x22,0x5f,0xd7,0x6a,0x18,0xce,0x02,
+ 0xc4,0x58,0x58,0x58,0x18,0x3a,0x18,0xe6,0x00,0xd7,0x68,0x27,0x48,0x4f,0x05,0xc3,
+ 0x00,0xa0,0x37,0x36,0xd6,0x6a,0x58,0x58,0x58,0x4f,0xc3,0x02,0xc4,0x18,0x8f,0x18,
+ 0xa6,0x02,0x5f,0xed,0x00,0x18,0xe6,0x01,0x4f,0xe3,0x00,0x18,0x38,0x18,0xed,0x00,
+ 0xd6,0x68,0x4f,0x05,0xc3,0x00,0x96,0x37,0x36,0xd6,0x6a,0x58,0x58,0x58,0x4f,0xc3,
+ 0x02,0xc4,0x18,0x8f,0x18,0xa6,0x04,0x5f,0xed,0x00,0x18,0xe6,0x03,0x4f,0xe3,0x00,
+ 0x18,0x38,0x18,0xed,0x00,0x7c,0x00,0x6a,0xd6,0x6a,0xc1,0x05,0x25,0x9f,0x5f,0xd7,
+ 0x6a,0xc6,0x91,0xd7,0x68,0xbd,0x4a,0xc3,0xbd,0x4a,0xc3,0xbd,0x4a,0xc3,0xd6,0x6a,
+ 0x4f,0x05,0x18,0x8f,0x18,0xec,0xa2,0xdd,0x91,0x18,0xec,0x98,0xdd,0x8f,0xd6,0x91,
+ 0xf7,0x07,0x32,0xd6,0x92,0xf7,0x07,0x39,0xd6,0x8f,0xf7,0x07,0x3a,0xd6,0x90,0xf7,
+ 0x07,0x3b,0xd6,0x6a,0x4f,0x18,0x8f,0x18,0xe6,0x93,0xf7,0x07,0x3c,0xc6,0xab,0xd7,
+ 0x68,0x7c,0x00,0x6a,0x8d,0x71,0x5f,0xd7,0x68,0xd7,0x6a,0x74,0x00,0x68,0x4f,0x18,
+ 0x8f,0x18,0xe6,0x93,0x27,0x03,0x14,0x68,0x10,0x7c,0x00,0x6a,0xd6,0x6a,0xc1,0x05,
+ 0x25,0xe9,0xd6,0xb7,0x27,0x03,0x14,0x68,0x20,0xf6,0x07,0x21,0xc4,0xc0,0xda,0x68,
+ 0xf7,0x07,0x21,0xd6,0x68,0xd7,0x6a,0xc6,0x07,0xd7,0x68,0x13,0x6a,0x02,0x04,0xc6,
+ 0x0c,0xd7,0x68,0x13,0x6a,0x1c,0x04,0xc6,0x21,0xd7,0x68,0x5f,0xd7,0x6a,0x20,0x12,
+ 0x4f,0xc3,0x06,0x92,0x18,0x8f,0xe6,0x02,0x18,0xeb,0x8f,0xe7,0x02,0x7c,0x00,0x6a,
+ 0xd6,0x6a,0xd1,0x68,0x25,0xea,0xd6,0x68,0x4f,0xc3,0x06,0x92,0x18,0x8f,0xe6,0x02,
+ 0x18,0xe7,0x8f,0x31,0x38,0x38,0x39,0x3c,0x3c,0xd6,0x6a,0x4f,0x05,0x8f,0xec,0xa2,
+ 0xdd,0x91,0xec,0x98,0xdd,0x8f,0xce,0x06,0x92,0xd6,0x68,0x3a,0xd6,0x91,0xe7,0x00,
+ 0xd6,0x68,0x4f,0xc3,0x06,0x92,0x8f,0xd6,0x92,0xe7,0x01,0xd6,0x8f,0xe7,0x02,0xd6,
+ 0x90,0xe7,0x03,0x3c,0xd6,0x6a,0x4f,0x8f,0xe6,0x93,0x38,0xe7,0x04,0x7c,0x00,0x6a,
+ 0xd6,0x68,0xcb,0x05,0xd7,0x68,0x38,0x38,0x39,0x7f,0x01,0xb4,0xd6,0xc6,0xc5,0x3f,
+ 0x26,0x04,0x13,0xbd,0x3f,0x05,0xc6,0x01,0xf7,0x01,0xb4,0xf6,0x02,0x75,0x5a,0x26,
+ 0x05,0xc6,0x01,0xf7,0x01,0xb4,0x39,0xf6,0x01,0xb4,0x5a,0x26,0x17,0x13,0xe6,0x08,
+ 0x0a,0xbd,0xf7,0xed,0xbd,0xef,0x0d,0xbd,0xf7,0xd6,0x39,0xbd,0xf7,0xd6,0xbd,0xef,
+ 0x0d,0xbd,0xf7,0xed,0x39,0x3c,0x3c,0x5f,0xd7,0x6a,0x7e,0x4b,0xcd,0x4f,0x05,0x05,
+ 0xc3,0x00,0x29,0xfd,0x03,0xd4,0x8f,0xe6,0x00,0x5a,0x27,0x09,0xe6,0x01,0xd1,0xc2,
+ 0x26,0x31,0xfe,0x03,0xd4,0xe6,0x01,0xe1,0x00,0x26,0x0e,0xe6,0x00,0x5a,0x26,0x04,
+ 0x6c,0x01,0x20,0x05,0xfe,0x03,0xd4,0x6a,0x00,0xe6,0x03,0xe1,0x02,0x26,0x14,0xd1,
+ 0xc0,0x24,0x05,0x6c,0x03,0xfe,0x03,0xd4,0xe6,0x02,0xc1,0x01,0x23,0x05,0x6a,0x02,
+ 0xfe,0x03,0xd4,0xe6,0x02,0x5a,0x27,0x09,0xe6,0x03,0xd1,0xc0,0x26,0x2e,0xfe,0x03,
+ 0xd4,0xe6,0x03,0xe1,0x02,0x26,0x0e,0xe6,0x02,0x5a,0x26,0x04,0x6c,0x03,0x20,0x05,
+ 0xfe,0x03,0xd4,0x6a,0x02,0xe6,0x01,0xe1,0x00,0x26,0x11,0xd1,0xc2,0x24,0x05,0x6c,
+ 0x01,0xfe,0x03,0xd4,0xe6,0x00,0xc1,0x01,0x23,0x02,0x6a,0x00,0x7c,0x00,0x6a,0xd6,
+ 0x6a,0xd1,0xc8,0x24,0x03,0x7e,0x4b,0x49,0x38,0x38,0x39,0x3c,0x3c,0x5f,0xd7,0x6a,
+ 0x7e,0x4c,0x86,0x4f,0x8f,0xe6,0x93,0x26,0x05,0xce,0x03,0x00,0x20,0x18,0xce,0x03,
+ 0x00,0xd6,0x6a,0x3a,0x6c,0x00,0xe6,0x00,0xc1,0x05,0x23,0x04,0xc6,0x05,0xe7,0x00,
+ 0x5a,0x26,0x0a,0xce,0x01,0x3e,0xd6,0x6a,0x3a,0x6f,0x00,0x20,0x38,0xe6,0x00,0xc1,
+ 0x02,0x26,0x32,0xd6,0x6a,0x58,0x58,0x4f,0xc3,0x01,0x5c,0x37,0x36,0xd6,0x6a,0x58,
+ 0x58,0x58,0x4f,0xc3,0x01,0xc2,0x8f,0xec,0x02,0x38,0xed,0x02,0xd6,0x6a,0x58,0x58,
+ 0x4f,0xc3,0x01,0x48,0x37,0x36,0xd6,0x6a,0x58,0x58,0x58,0x4f,0xc3,0x01,0xea,0x8f,
+ 0xec,0x02,0x38,0xed,0x02,0xce,0x01,0x39,0xd6,0x6a,0x3a,0xa6,0x00,0x27,0x36,0x4f,
+ 0x05,0x37,0x36,0xce,0x01,0x5c,0xd6,0x6a,0x58,0x58,0x3a,0xec,0x00,0x38,0xed,0xa2,
+ 0xd6,0x6a,0x4f,0x05,0x37,0x36,0xce,0x01,0x48,0xd6,0x6a,0x58,0x58,0x3a,0xec,0x00,
+ 0x38,0xed,0x98,0xd6,0x6a,0x4f,0x8f,0xc6,0x01,0xe7,0x93,0xce,0x01,0x43,0xd6,0x6a,
+ 0x3a,0xc6,0x1f,0xe7,0x00,0x7c,0x00,0x6a,0xd6,0x6a,0xd1,0xc5,0x24,0x03,0x7e,0x4b,
+ 0xdf,0x38,0x38,0x39,0x12,0xcb,0x20,0x03,0x7e,0x4d,0x68,0x5f,0xd7,0x6a,0x18,0xce,
+ 0x03,0xe7,0x7e,0x4d,0x61,0x4f,0x97,0x67,0x05,0x8f,0xec,0xa2,0xdd,0x91,0xec,0x98,
+ 0xdd,0x8f,0xd6,0x6a,0x86,0x03,0x3d,0xc3,0x03,0xd8,0xfd,0x03,0xd6,0x4f,0xd6,0x6a,
+ 0x8f,0xe6,0x93,0x26,0x09,0xbd,0x4d,0x69,0x18,0x6f,0x04,0x7e,0x4d,0x58,0x18,0x6d,
+ 0x04,0x26,0x0f,0x18,0xe7,0x04,0xdc,0x91,0x18,0xed,0x00,0xdc,0x8f,0x18,0xed,0x02,
+ 0x20,0x7a,0xfe,0x03,0xd6,0xe6,0x00,0xc1,0x01,0x26,0x0a,0xce,0x01,0x3e,0xd6,0x6a,
+ 0x3a,0x6f,0x00,0x20,0x67,0xdc,0x91,0x18,0xa3,0x00,0x2f,0x0a,0x05,0xb3,0x01,0x78,
+ 0x23,0x13,0x86,0x02,0x20,0x0d,0x43,0x53,0xc3,0x00,0x01,0x05,0xb3,0x01,0x78,0x23,
+ 0x04,0x86,0x01,0x97,0x67,0x96,0x67,0xfe,0x03,0xd6,0xe6,0x01,0x27,0x07,0x11,0x26,
+ 0x04,0xc6,0x01,0xe7,0x00,0xa7,0x01,0x7f,0x00,0x67,0xdc,0x8f,0x18,0xa3,0x02,0x2f,
+ 0x0a,0x05,0xb3,0x01,0x76,0x23,0x13,0x86,0x02,0x20,0x0d,0x43,0x53,0xc3,0x00,0x01,
+ 0x05,0xb3,0x01,0x76,0x23,0x04,0x86,0x01,0x97,0x67,0x96,0x67,0xfe,0x03,0xd6,0xe6,
+ 0x02,0x27,0x07,0x11,0x26,0x04,0xc6,0x01,0xe7,0x00,0xa7,0x02,0xc6,0x05,0x18,0x3a,
+ 0x7c,0x00,0x6a,0xd6,0x6a,0xd1,0xc5,0x24,0x03,0x7e,0x4c,0xa1,0x39,0x3c,0xfe,0x03,
+ 0xd6,0x6f,0x00,0x6f,0x01,0x6f,0x02,0x38,0x39,0xbd,0xd6,0x07,0xd6,0xb9,0x27,0x03,
+ 0x14,0xb9,0x80,0x39,0xd6,0x81,0x26,0x04,0xd6,0x68,0xd7,0x80,0xbd,0xd9,0x29,0x39,
+ 0xce,0x05,0xe0,0xcc,0x4d,0x80,0xed,0x68,0xcc,0x4d,0x75,0xed,0x5e,0xcc,0x49,0x12,
+ 0xed,0x48,0xcc,0x46,0xf8,0xed,0x06,0xcc,0x49,0x43,0xed,0x58,0xcc,0x47,0x6d,0xed,
+ 0x56,0xcc,0x47,0x6e,0xed,0x4e,0xcc,0x4d,0xd8,0xed,0x60,0xcc,0x49,0x0d,0xed,0x50,
+ 0xcc,0x4e,0x33,0xed,0x6e,0x39,0xbd,0xc4,0x92,0xce,0x06,0x92,0xcc,0x00,0x00,0xed,
+ 0x81,0xcc,0xe8,0x11,0xed,0x83,0xcc,0x10,0x10,0xed,0x85,0x39,0x3c,0x3c,0xd6,0xc8,
+ 0xd1,0xac,0x26,0x20,0xf6,0x02,0xfb,0xd1,0xac,0x27,0x08,0xd6,0xac,0xf7,0x02,0xfb,
+ 0x5f,0xd7,0xf4,0xd6,0xac,0x27,0x0b,0xd6,0xf4,0xc1,0xff,0x24,0x07,0x7c,0x00,0xf4,
+ 0x20,0x02,0xd7,0xf4,0xd6,0xc8,0x27,0x10,0xd6,0xac,0x27,0x0c,0xd6,0xc8,0xd1,0xac,
+ 0x27,0x06,0xd6,0xf4,0xc1,0x04,0x22,0x03,0x7e,0xf4,0x76,0xd6,0xad,0x27,0x04,0xd1,
+ 0xc8,0x27,0x07,0xd6,0xc8,0xd7,0xad,0x5f,0xd7,0xae,0x7e,0xf4,0xae,0xd6,0xac,0x37,
+ 0xbd,0xd6,0x93,0x33,0xd7,0xac,0x39,0xbd,0xf8,0xdb,0x10,0x4f,0x5f,0xfd,0x01,0x7e,
+ 0xd6,0x68,0x26,0x04,0xdc,0x7d,0x20,0x02,0xdc,0x7b,0xfd,0x01,0x80,0x86,0x09,0x27,
+ 0x0f,0x78,0x01,0xbc,0x79,0x01,0xbb,0x79,0x01,0xba,0x79,0x01,0xb9,0x4a,0x26,0xf1,
+ 0xdc,0x8d,0x6f,0x02,0x6f,0x03,0xed,0x0a,0xec,0x02,0xed,0x08,0xfc,0x01,0xb9,0xed,
+ 0x02,0xec,0x00,0xc3,0xff,0xf9,0x18,0x8f,0xfc,0x01,0xbb,0xbd,0xf9,0x9d,0x18,0xce,
+ 0x4f,0xb5,0xbd,0xfb,0xa9,0xdd,0x91,0x83,0x04,0x00,0x25,0x03,0x7e,0x4f,0x27,0xcc,
+ 0x04,0x00,0xed,0x0e,0x93,0x91,0xed,0x0c,0x83,0x01,0x00,0x22,0x1f,0xf6,0x02,0xf0,
+ 0x4f,0xed,0x0a,0xf6,0x02,0xed,0x18,0x8f,0xec,0x0c,0xbd,0xf9,0x08,0x3c,0xee,0x0a,
+ 0x02,0x8f,0x38,0xed,0x08,0xcc,0x04,0x00,0xa3,0x08,0x20,0x60,0xec,0x0c,0x83,0x02,
+ 0x00,0x22,0x2a,0xf6,0x02,0xf0,0x4f,0xed,0x0a,0xf6,0x02,0xee,0x18,0x8f,0xec,0x0c,
+ 0x83,0x01,0x00,0xbd,0xf9,0x08,0xed,0x08,0xb6,0x02,0xed,0x5f,0xe3,0x08,0x3c,0xee,
+ 0x0a,0x02,0x8f,0x38,0xed,0x06,0xcc,0x04,0x00,0xa3,0x06,0x20,0x2f,0xf6,0x02,0xf0,
+ 0x4f,0xed,0x0a,0xf6,0x02,0xef,0x18,0x8f,0xec,0x0c,0x83,0x02,0x00,0xbd,0xf9,0x08,
+ 0xed,0x08,0xb6,0x02,0xee,0x5f,0xed,0x06,0xb6,0x02,0xed,0xe3,0x06,0xe3,0x08,0x3c,
+ 0xee,0x0a,0x02,0x8f,0x38,0xed,0x04,0xcc,0x04,0x00,0xa3,0x04,0xdd,0x91,0xb3,0x01,
+ 0x80,0x22,0x03,0x7e,0x4f,0xb1,0x4f,0x5f,0x7e,0x4f,0xaf,0xfc,0x01,0x80,0x83,0x04,
+ 0x00,0x93,0x91,0x24,0xee,0xfc,0x01,0x80,0x83,0x04,0x00,0xed,0x0e,0xdc,0x91,0xa3,
+ 0x0e,0xed,0x0c,0x83,0x01,0x00,0x22,0x12,0xf6,0x02,0xf0,0x4f,0xed,0x0a,0xf6,0x02,
+ 0xed,0x18,0x8f,0xec,0x0c,0xbd,0xf9,0x08,0x20,0x44,0xec,0x0c,0x83,0x02,0x00,0x22,
+ 0x1b,0xf6,0x02,0xf0,0x4f,0xed,0x0a,0xf6,0x02,0xee,0x18,0x8f,0xec,0x0c,0x83,0x01,
+ 0x00,0xbd,0xf9,0x08,0xed,0x08,0xb6,0x02,0xed,0x5f,0x20,0x20,0xf6,0x02,0xf0,0x4f,
+ 0xed,0x0a,0xf6,0x02,0xef,0x18,0x8f,0xec,0x0c,0x83,0x02,0x00,0xbd,0xf9,0x08,0xed,
+ 0x08,0xb6,0x02,0xee,0x5f,0xed,0x06,0xb6,0x02,0xed,0xe3,0x06,0xe3,0x08,0x3c,0xee,
+ 0x0a,0x02,0x8f,0x38,0xe3,0x0e,0xdd,0x91,0xb3,0x01,0x80,0x25,0x08,0xfc,0x01,0x80,
+ 0x83,0x00,0x01,0xdd,0x91,0xae,0x00,0x38,0x39,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,
+};
+
+#endif
diff --git a/drivers/input/touchscreen/gt811_ts.c b/drivers/input/touchscreen/gt811_ts.c
new file mode 100755
index 000000000000..c2cd505c1c15
--- /dev/null
+++ b/drivers/input/touchscreen/gt811_ts.c
@@ -0,0 +1,2017 @@
+/* drivers/input/touchscreen/gt811.c
+ *
+ * Copyright (C) 2010 - 2011 Goodix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ *Any problem,please contact andrew@goodix.com,+86 755-33338828
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/earlysuspend.h>
+#include <linux/hrtimer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/gpio.h>
+//#include <plat/gpio-cfg.h>
+//#include <plat/gpio-bank-l.h>
+//#include <plat/gpio-bank-f.h>
+#include <linux/irq.h>
+#include <linux/syscalls.h>
+#include <linux/reboot.h>
+#include <linux/proc_fs.h>
+#include "gt811_ts.h"
+#include "gt811_firmware.h"
+
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/completion.h>
+#include <asm/uaccess.h>
+#include <linux/input/mt.h>
+#include <mach/iomux.h>
+
+static struct workqueue_struct *goodix_wq;
+static const char *s3c_ts_name = "gt811_ts";
+//static struct point_queue finger_list;
+struct i2c_client * i2c_connect_client = NULL;
+//EXPORT_SYMBOL(i2c_connect_client);
+static struct proc_dir_entry *goodix_proc_entry;
+static short goodix_read_version(struct gt811_ts_data *ts);
+//static int tpd_button(struct gt811_ts_data *ts, unsigned int x, unsigned int y, unsigned int down);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void goodix_ts_early_suspend(struct early_suspend *h);
+static void goodix_ts_late_resume(struct early_suspend *h);
+int gt811_downloader( struct gt811_ts_data *ts, unsigned char * data);
+#endif
+//used by firmware update CRC
+unsigned int oldcrc32 = 0xFFFFFFFF;
+unsigned int crc32_table[256];
+unsigned int ulPolynomial = 0x04c11db7;
+
+unsigned int raw_data_ready = RAW_DATA_NON_ACTIVE;
+
+//#define DEBUG
+#ifdef DEBUG
+int sum = 0;
+int access_count = 0;
+int int_count = 0;
+#endif
+#define HAVE_TOUCH_KEY
+ //#define READ_KEY_VALUE
+ //#define READ_KEY_COOR
+
+#ifdef HAVE_TOUCH_KEY
+ const uint16_t touch_key_array[]={
+ KEY_MENU, //MENU
+ KEY_HOMEPAGE,
+ KEY_BACK,
+ KEY_SEARCH
+ };
+#define MAX_KEY_NUM (sizeof(touch_key_array)/sizeof(touch_key_array[0]))
+#endif
+
+/*******************************************************
+Function:
+ Read data from the slave
+ Each read operation with two i2c_msg composition, for the first message sent from the machine address,
+ Article 2 reads the address used to send and retrieve data; each message sent before the start signal
+Parameters:
+ client: i2c devices, including device address
+ buf [0]: The first byte to read Address
+ buf [1] ~ buf [len]: data buffer
+ len: the length of read data
+return:
+ Execution messages
+*********************************************************/
+/*Function as i2c_master_send */
+static int i2c_read_bytes(struct i2c_client *client, uint8_t *buf, int len)
+{
+ struct i2c_msg msgs[2];
+ int ret=-1;
+
+ msgs[0].flags=!I2C_M_RD;
+ msgs[0].addr=client->addr;
+ msgs[0].len=2;
+ msgs[0].buf=&buf[0];
+ msgs[0].scl_rate=200000;
+
+ msgs[1].flags=I2C_M_RD;
+ msgs[1].addr=client->addr;
+ msgs[1].len=len-2;
+ msgs[1].buf=&buf[2];
+ msgs[1].scl_rate=200000;
+
+ ret=i2c_transfer(client->adapter,msgs, 2);
+ return ret;
+}
+
+/*******************************************************
+Function:
+ Write data to a slave
+Parameters:
+ client: i2c devices, including device address
+ buf [0]: The first byte of the write address
+ buf [1] ~ buf [len]: data buffer
+ len: data length
+return:
+ Execution messages
+*******************************************************/
+/*Function as i2c_master_send */
+static int i2c_write_bytes(struct i2c_client *client,uint8_t *data,int len)
+{
+ struct i2c_msg msg;
+ int ret=-1;
+ //åé设å¤å°å
+ msg.flags=!I2C_M_RD;//åæ¶æ? msg.addr=client->addr;
+ msg.len=len;
+ msg.buf=data;
+ msg.scl_rate=200000;
+ msg.addr=client->addr;
+
+ ret=i2c_transfer(client->adapter,&msg, 1);
+ return ret;
+}
+
+/*******************************************************
+Function:
+ Send a prefix command
+
+Parameters:
+ ts: client private data structure
+
+return:
+ Results of the implementation code, 0 for normal execution
+*******************************************************/
+static int i2c_pre_cmd(struct gt811_ts_data *ts)
+{
+ int ret;
+ uint8_t pre_cmd_data[2]={0};
+ pre_cmd_data[0]=0x0f;
+ pre_cmd_data[1]=0xff;
+ ret=i2c_write_bytes(ts->client,pre_cmd_data,2);
+ //msleep(2);
+ return ret;
+}
+
+/*******************************************************
+Function:
+ Send a suffix command
+
+Parameters:
+ ts: client private data structure
+
+return:
+ Results of the implementation code, 0 for normal execution
+*******************************************************/
+static int i2c_end_cmd(struct gt811_ts_data *ts)
+{
+ int ret;
+ uint8_t end_cmd_data[2]={0};
+ end_cmd_data[0]=0x80;
+ end_cmd_data[1]=0x00;
+ ret=i2c_write_bytes(ts->client,end_cmd_data,2);
+ //msleep(2);
+ return ret;
+}
+
+/********************************************************************
+
+*********************************************************************/
+#ifdef COOR_TO_KEY
+static int list_key(s32 x_value, s32 y_value, u8* key)
+{
+ s32 i;
+
+#ifdef AREA_Y
+ if (y_value <= AREA_Y)
+#else
+ if (x_value <= AREA_X)
+#endif
+ {
+ return 0;
+ }
+
+ for (i = 0; i < MAX_KEY_NUM; i++)
+ {
+ if (abs(key_center[i][x] - x_value) < KEY_X
+ && abs(key_center[i][y] - y_value) < KEY_Y)
+ {
+ (*key) |= (0x01<<i);
+ }
+ }
+
+ return 1;
+}
+#endif
+
+/*******************************************************
+Function:
+ Guitar initialization function, used to send configuration information, access to version information
+Parameters:
+ ts: client private data structure
+return:
+ Results of the implementation code, 0 for normal execution
+*******************************************************/
+static int goodix_init_panel(struct gt811_ts_data *ts)
+{
+ short ret=-1;
+ uint8_t config_info[] = {
+ 0x06,0xA2,
+/*
+ 0x00,0x02,0x04,0x06,0x08,0x0A,0x0C,0x0E,0x10,0x12,0x60,0x00,0x50,0x00,0x40,0x00,
+ 0x30,0x00,0x20,0x00,0x10,0x00,0x00,0x00,0x70,0x00,0x80,0x00,0x90,0x00,0xA0,0x00,
+ 0xB0,0x00,0xC0,0x00,0xD0,0x00,0xE0,0x00,0xF0,0x00,0x05,0x03,0x90,0x90,0x90,0x30,
+ 0x30,0x30,0x0F,0x0F,0x0A,0x50,0x3C,0x08,0x03,0x3C,0x05,0x00,0x14,0x00,0x20,0x04,
+ 0x04,0x64,0x5A,0x40,0x40,0x00,0x00,0x03,0x19,0x00,0x05,0x00,0x00,0x00,0x00,0x00,
+ 0x20,0x10,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x50,
+ 0x3C,0x3C,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x01
+*/
+/* 0x00,0x02,0x04,0x06,0x08,0x0A,0x0C,0x0E,0x10,0x12,0x13,0x33,0x23,0x33,0x33,0x33,
+ 0x43,0x33,0x53,0x33,0x63,0x33,0x73,0x33,0x83,0x33,0x93,0x33,0xA3,0x33,0xB3,0x33,
+ 0xC3,0x33,0xD3,0x33,0xE3,0x33,0xF3,0x33,0x03,0x33,0x3B,0x03,0x88,0x88,0x88,0x1B,
+ 0x1B,0x1B,0x0F,0x0F,0x0A,0x40,0x30,0x0F,0x03,0x00,0x05,0x00,0x14,0x00,0x1E,0x04,
+ 0x04,0x64,0x5A,0x40,0x40,0x00,0x00,0x05,0x19,0x05,0x05,0x00,0x00,0x00,0x00,0x00,
+ 0x20,0x10,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x50,
+ 0x3C,0x3C,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x01
+*/
+
+ /* 0x12,0x10,0x0E,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,
+ 0x02,0x22,0x12,0x22,0x22,0x22,0x32,0x22,0x42,0x22,
+ 0x52,0x22,0x62,0x22,0x72,0x22,0x82,0x22,0x92,0x22,
+ 0xA2,0x22,0xB2,0x22,0xC2,0x22,0xD2,0x22,0xE2,0x22,
+ 0xF2,0x22,0x1B,0x03,0x88,0x88,0x88,0x1D,0x1D,0x1D,
+ 0x10,0x0F,0x0A,0x47,0x2A,0x0D,0x03,0x00,0x05,0x00,
+ 0x03,0x00,0x04,0x00,0x00,0x38,0x33,0x35,0x30,0x00,
+ 0x00,0x07,0x20,0x05,0x05,0x00,0x00,0x00,0x00,0x00,
+ 0x32,0x16,0x80,0x03,0x00,0x40,0x17,0x88,0x1B,0x00,
+ 0x71,0x80,0x90,0xA0,0x0A,0x45,0x30,0x20,0x14,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x01*/
+
+ /* 0x12,0x10,0x0E,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,
+ 0x52,0x22,0x62,0x22,0x72,0x22,0x82,0x22,0x92,0x22,
+ 0xA2,0x22,0xB2,0x22,0xC2,0x22,0xD2,0x22,0xE2,0x22,
+ 0xF2,0x22,0x02,0x22,0x12,0x22,0x22,0x22,0x32,0x22,
+ 0x42,0x22,0x07,0x03,0x88,0x88,0x88,0x27,0x27,0x27,
+ 0x0B,0x0A,0x09,0x40,0x30,0x01,0x03,0x00,0x05,0xE0,
+ 0x01,0x20,0x03,0x00,0x00,0xFF,0xFF,0x42,0x2B,0x00,
+ 0x00,0x23,0x14,0x05,0x06,0x00,0x00,0x00,0x00,0x00,
+ 0x14,0x10,0xC6,0x02,0x00,0x40,0x17,0x88,0x20,0x00,
+ 0x60,0x70,0x80,0x90,0x0D,0x40,0x30,0x25,0x20,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x01*/
+ 0x12,0x10,0x0E,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,
+ 0x02,0x22,0x12,0x22,0x22,0x22,0x32,0x22,0x42,0x22,
+ 0x52,0x22,0x62,0x22,0x72,0x22,0x83,0x22,0x92,0x22,
+ 0xA2,0x22,0xB2,0x22,0xC2,0x22,0xD2,0x22,0xE2,0x22,
+ 0xF2,0x22,0x1B,0x03,0x28,0x28,0x28,0x20,0x20,0x20,
+ 0x0F,0x0F,0x0A,0x45,0x30,0x04,0x03,0x00,0x05,0xE0,
+ 0x01,0x20,0x03,0x00,0x00,0x38,0x33,0x35,0x30,0x00,
+ 0x00,0x26,0x14,0x02,0x0A,0x00,0x00,0x00,0x00,0x00,
+ 0x14,0x10,0x30,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x01
+
+ };
+
+ config_info[62] = TOUCH_MAX_WIDTH >> 8;
+ config_info[61] = TOUCH_MAX_WIDTH & 0xff;
+ config_info[64] = TOUCH_MAX_HEIGHT >> 8;
+ config_info[63] = TOUCH_MAX_HEIGHT & 0xff;
+
+ ret = i2c_write_bytes(ts->client, config_info, sizeof(config_info)/sizeof(config_info[0]));
+ if(ret < 0)
+ {
+ dev_info(&ts->client->dev, "GT811 Send config failed!\n");
+ return ret;
+ }
+ ts->abs_y_max = (config_info[62]<<8) + config_info[61];
+ ts->abs_x_max = (config_info[64]<<8) + config_info[63];
+ ts->max_touch_num = config_info[60];
+ ts->int_trigger_type = ((config_info[57]>>3)&0x01);
+ dev_info(&ts->client->dev, "GT811 init info:X_MAX=%d,Y_MAX=%d,TRIG_MODE=%s\n",
+ ts->abs_x_max, ts->abs_y_max, ts->int_trigger_type?"RISING EDGE":"FALLING EDGE");
+
+ return 0;
+}
+
+/*******************************************************
+FUNCTION:
+ Read gt811 IC Version
+Argument:
+ ts: client
+return:
+ 0:success
+ -1:error
+*******************************************************/
+static short goodix_read_version(struct gt811_ts_data *ts)
+{
+ short ret;
+ uint8_t version_data[5]={0x07,0x17,0,0}; //store touchscreen version infomation
+ uint8_t version_data2[5]={0x07,0x17,0,0}; //store touchscreen version infomation
+
+ char i = 0;
+ char cpf = 0;
+ memset(version_data, 0, 5);
+ version_data[0]=0x07;
+ version_data[1]=0x17;
+
+ ret=i2c_read_bytes(ts->client, version_data, 4);
+ if (ret < 0)
+ return ret;
+
+ for(i = 0;i < 10;i++)
+ {
+ i2c_read_bytes(ts->client, version_data2, 4);
+ if((version_data[2] !=version_data2[2])||(version_data[3] != version_data2[3]))
+ {
+ version_data[2] = version_data2[2];
+ version_data[3] = version_data2[3];
+ msleep(5);
+ break;
+ }
+ msleep(5);
+ cpf++;
+ }
+
+ if(cpf == 10)
+ {
+ ts->version = (version_data[2]<<8)+version_data[3];
+ dev_info(&ts->client->dev, "GT811 Verion:0x%04x\n", ts->version);
+ ret = 0;
+ }
+ else
+ {
+ dev_info(&ts->client->dev," Guitar Version Read Error: %d.%d\n",version_data[3],version_data[2]);
+ ts->version = 0xffff;
+ ret = -1;
+ }
+
+ return ret;
+
+}
+/******************start add by kuuga*******************/
+static void gt811_irq_enable(struct gt811_ts_data *ts)
+{
+ unsigned long irqflags;
+ spin_lock_irqsave(&ts->irq_lock, irqflags);
+ if (ts->irq_is_disable)
+ {
+ enable_irq(ts->irq);
+ ts->irq_is_disable = 0;
+ }
+ spin_unlock_irqrestore(&ts->irq_lock, irqflags);
+}
+
+static void gt811_irq_disable(struct gt811_ts_data *ts)
+{
+ unsigned long irqflags;
+ spin_lock_irqsave(&ts->irq_lock, irqflags);
+ if (!ts->irq_is_disable)
+ {
+ disable_irq_nosync(ts->irq);
+ ts->irq_is_disable = 1;
+ }
+ spin_unlock_irqrestore(&ts->irq_lock, irqflags);
+}
+
+/*****************end add by kuuga****************/
+
+/*******************************************************
+Function:
+ Touch-screen work function
+ Triggered by the interruption, to accept a set of coordinate data,
+ and then analyze the output parity
+Parameters:
+ ts: client private data structure
+return:
+ Results of the implementation code, 0 for normal execution
+********************************************************/
+static void goodix_ts_work_func(struct work_struct *work)
+{
+ uint8_t point_data[READ_BYTES_NUM] = {READ_TOUCH_ADDR_H,READ_TOUCH_ADDR_L,0};//point_data[8*MAX_FINGER_NUM+2]={ 0 };
+ uint8_t check_sum = 0;
+ uint8_t read_position = 0;
+ uint8_t track_id[MAX_FINGER_NUM];
+ uint8_t point_index = 0;
+ uint8_t point_tmp = 0;
+ uint8_t point_count = 0;
+ uint16_t input_x = 0;
+ uint16_t input_y = 0;
+ uint8_t input_w = 0;
+ static uint8_t last_key = 0;
+ uint8_t finger = 0;
+ uint8_t key = 0;
+ unsigned int count = 0;
+ unsigned int position = 0;
+ int ret=-1;
+ int tmp = 0;
+
+ struct gt811_ts_data *ts = container_of(work, struct gt811_ts_data, work);
+#ifdef DEBUG
+ printk("int count :%d\n", ++int_count);
+ printk("ready?:%d\n", raw_data_ready);
+#endif
+ if (RAW_DATA_ACTIVE == raw_data_ready)
+ {
+ raw_data_ready = RAW_DATA_READY;
+#ifdef DEBUG
+ printk("ready!\n");
+#endif
+ }
+
+#ifndef INT_PORT
+COORDINATE_POLL:
+#endif
+ if( tmp > 9)
+ {
+ dev_info(&(ts->client->dev), "Because of transfer error,touchscreen stop working.\n");
+ goto XFER_ERROR ;
+ }
+
+ ret=i2c_read_bytes(ts->client, point_data, sizeof(point_data)/sizeof(point_data[0]));
+ if(ret <= 0)
+ {
+ dev_err(&(ts->client->dev),"I2C transfer error. Number:%d\n ", ret);
+ ts->bad_data = 1;
+ tmp ++;
+ ts->retry++;
+#ifndef INT_PORT
+ goto COORDINATE_POLL;
+#else
+ goto XFER_ERROR;
+#endif
+ }
+#if 0
+ for(count=0;count<(sizeof(point_data)/sizeof(point_data[0])); count++)
+ {
+ printk("[%2d]:0x%2x", count, point_data[count]);
+ if((count+1)%10==0)printk("\n");
+ }
+ printk("\n");
+#endif
+ if(point_data[2]&0x20)
+ {
+ if(point_data[3]==0xF0)
+ {
+ gpio_direction_output(SHUTDOWN_PORT, 0);
+ msleep(1);
+ // gpio_direction_input(SHUTDOWN_PORT);
+ gpio_set_value(SHUTDOWN_PORT,0);
+ msleep(100);
+ gpio_set_value(SHUTDOWN_PORT,1);
+ msleep(100);
+
+ goodix_init_panel(ts);
+ goto WORK_FUNC_END;
+ }
+ }
+ switch(point_data[2]& 0x1f)
+ {
+ case 0:
+ case 1:
+ for(count=2; count<9; count++)
+ check_sum += (int)point_data[count];
+ read_position = 9;
+ break;
+ case 2:
+ case 3:
+ for(count=2; count<14;count++)
+ check_sum += (int)point_data[count];
+ read_position = 14;
+ break;
+ default: //touch finger larger than 3
+ for(count=2; count<35;count++)
+ check_sum += (int)point_data[count];
+ read_position = 35;
+ }
+ if(check_sum != point_data[read_position])
+ {
+ dev_info(&ts->client->dev, "coor chksum error!\n");
+ goto XFER_ERROR;
+ }
+
+ point_index = point_data[2]&0x1f;
+ point_tmp = point_index;
+ for(position=0; (position<MAX_FINGER_NUM)&&point_tmp; position++)
+ {
+ if(point_tmp&0x01)
+ {
+ track_id[point_count++] = position;
+ }
+ point_tmp >>= 1;
+ }
+ finger = point_count;
+ if(finger)
+ {
+ for(count=0; count<finger; count++)
+ {
+ if(track_id[count]!=3)
+ {
+ if(track_id[count]<3)
+ position = 4+track_id[count]*5;
+ else
+ position = 30;
+ input_x = (uint16_t)(point_data[position]<<8)+(uint16_t)point_data[position+1];
+ input_y = (uint16_t)(point_data[position+2]<<8)+(uint16_t)point_data[position+3];
+ input_w = point_data[position+4];
+ }
+ else
+ {
+ input_x = (uint16_t)(point_data[19]<<8)+(uint16_t)point_data[26];
+ input_y = (uint16_t)(point_data[27]<<8)+(uint16_t)point_data[28];
+ input_w = point_data[29];
+ }
+
+ //printk("real_input_y = %d,TOUCH_MAX_HEIGHT=%d,TOUCH_MAX_WIDTH=%d,input_x=%d,input_y=%d,input_w=%d\n",input_y, TOUCH_MAX_HEIGHT,TOUCH_MAX_WIDTH,TOUCH_MAX_HEIGHT - input_y,TOUCH_MAX_WIDTH-input_x, input_w);
+ //if((input_y > ts->abs_x_max)||(TOUCH_MAX_WIDTH-input_x > ts->abs_y_max))continue;
+ input_mt_slot(ts->input_dev, track_id[count]);
+ //input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, false);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
+ //printk("DOWN\n")
+; ;
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_y);
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_x);
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
+ //input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
+ //input_report_abs(ts->input_dev, ABS_MT_TRACKING_ID, track_id[count]);
+ //input_mt_sync(ts->input_dev);
+ }
+ }
+ else
+ {
+ for(tmp=0; tmp< MAX_FINGER_NUM; tmp++)
+ {
+ //printk("tmp=%d\n", tmp);
+ input_mt_slot(ts->input_dev, tmp);//æåºå·ä¸æ? //input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, false);
+ }
+ //input_mt_sync(ts->input_dev);
+ }
+
+ //input_report_key(ts->input_dev, BTN_TOUCH, finger > 0);
+ input_sync(ts->input_dev);
+
+#ifdef HAVE_TOUCH_KEY
+ key = point_data[3]&0x0F;
+ if((last_key != 0)||(key != 0))
+ {
+ for(count = 0; count < MAX_KEY_NUM; count++)
+ {
+ //printk("####################input_report_key++++++++++++%d\n",key);
+ input_report_key(ts->input_dev, touch_key_array[count], !!(key&(0x01<<count)));
+ }
+ }
+ last_key = key;
+#endif
+
+XFER_ERROR:
+WORK_FUNC_END:
+#ifndef STOP_IRQ_TYPE
+ if(ts->use_irq)
+ gt811_irq_enable(ts); //KT ADD 1202
+#endif
+}
+
+/*******************************************************
+Function:
+ Response function timer
+ Triggered by a timer, scheduling the work function of the touch screen operation; after re-timing
+Parameters:
+ timer: the timer function is associated
+return:
+ Timer mode, HRTIMER_NORESTART that do not automatically restart
+********************************************************/
+static enum hrtimer_restart goodix_ts_timer_func(struct hrtimer *timer)
+{
+ struct gt811_ts_data *ts = container_of(timer, struct gt811_ts_data, timer);
+ queue_work(goodix_wq, &ts->work);
+ hrtimer_start(&ts->timer, ktime_set(0, (POLL_TIME+6)*1000000), HRTIMER_MODE_REL);
+ return HRTIMER_NORESTART;
+}
+
+/*******************************************************
+Function:
+ Interrupt response function
+ Triggered by an interrupt, the scheduler runs the touch screen handler
+********************************************************/
+static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
+{
+ struct gt811_ts_data *ts = dev_id;
+
+#ifndef STOP_IRQ_TYPE
+ gt811_irq_disable(ts); //KT ADD 1202
+#endif
+ //disable_irq_nosync(ts->client->irq);
+ queue_work(goodix_wq, &ts->work);
+
+ return IRQ_HANDLED;
+}
+
+/*******************************************************
+Function:
+ Power management gt811, gt811 allowed to sleep or to wake up
+Parameters:
+ on: 0 that enable sleep, wake up 1
+return:
+ Is set successfully, 0 for success
+ Error code: -1 for the i2c error, -2 for the GPIO error;-EINVAL on error as a parameter
+********************************************************/
+static int goodix_ts_power(struct gt811_ts_data * ts, int on)
+{
+ int ret = -1;
+
+ unsigned char i2c_control_buf[3] = {0x06,0x92,0x01}; //suspend cmd
+
+#ifdef INT_PORT
+ if(ts != NULL && !ts->use_irq)
+ return -2;
+#endif
+ switch(on)
+ {
+ case 0:
+ ret = i2c_write_bytes(ts->client, i2c_control_buf, 3);
+ printk("ret++++++++++++++++= %d=\n",ret);
+ dev_info(&ts->client->dev, "Send suspend cmd\n");
+ if(ret < 0) //failed
+ ret = 0;
+ return ret;
+
+ case 1:
+ gpio_direction_output(SHUTDOWN_PORT,0);
+ msleep(1);
+ gpio_set_value(SHUTDOWN_PORT,0);
+ msleep(100);
+ gpio_set_value(SHUTDOWN_PORT,1);
+ msleep(100);
+ ret = 0;
+ return ret;
+
+ default:
+ dev_info(&ts->client->dev, "%s: Cant't support this command.", s3c_ts_name);
+ return -EINVAL;
+ }
+
+}
+/*******************************************************
+Function:
+ Touch-screen detection function
+ Called when the registration drive (required for a corresponding client);
+ For IO, interrupts and other resources to apply; equipment registration; touch screen initialization, etc.
+Parameters:
+ client: the device structure to be driven
+ id: device ID
+return:
+ Results of the implementation code, 0 for normal execution
+********************************************************/
+static int goodix_ts_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int ret = 0;
+ int retry=0;
+ char test_data = 1;
+ char buf[2]={0}; //w++
+ unsigned char read_data[2] = {0,0 };
+ const char irq_table[2] = {IRQF_TRIGGER_FALLING,IRQF_TRIGGER_RISING};
+ struct gt811_ts_data *ts;
+ // struct gt811_platform_data *811data = client->dev.platform_data;
+ struct gt811_platform_data *pdata;
+ dev_info(&client->dev,"Install gt811 driver.\n");
+ dev_info(&client->dev,"Driver Release Date:2012-02-08\n");
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ {
+ dev_err(&client->dev, "Must have I2C_FUNC_I2C.\n");
+ ret = -ENODEV;
+ goto err_check_functionality_failed;
+ }
+#if 0
+ ret=i2c_read_bytes(client, read_data, sizeof(read_data)/sizeof(read_data[0]));
+ if(ret <= 0)
+ {
+ dev_err(&client->dev, "Must have GT811.\n");
+ goto err_check_functionality_failed;
+ }
+#endif
+
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (ts == NULL) {
+ ret = -ENOMEM;
+ goto err_alloc_data_failed;
+ }
+
+ i2c_connect_client = client;
+
+ gpio_free(SHUTDOWN_PORT);
+ ret = gpio_request(SHUTDOWN_PORT, "RESET_INT");
+ if (ret < 0)
+ {
+ dev_err(&client->dev, "Failed to request RESET GPIO:%d, ERRNO:%d\n",(int)SHUTDOWN_PORT,ret);
+ goto err_gpio_request;
+ }
+
+ rk29_mux_api_set(GPIO0D3_PWM_1_NAME,GPIO0D_GPIO0D3);
+ gpio_pull_updown(SHUTDOWN_PORT, 1); //set GPIO pull-up
+
+ for(retry=0;retry <= 10; retry++)
+ {
+ gpio_direction_output(SHUTDOWN_PORT,0);
+ msleep(1);
+ // gpio_direction_input(SHUTDOWN_PORT);//setinput means not ack so set the reset high
+ // msleep(100);
+ gpio_set_value(SHUTDOWN_PORT,1);
+ msleep(100);
+ gpio_set_value(SHUTDOWN_PORT,0);
+ msleep(100);
+ gpio_set_value(SHUTDOWN_PORT,1);
+ msleep(100);
+ int val_ret = 1;
+ val_ret = gpio_get_value(SHUTDOWN_PORT);
+ ret = i2c_write_bytes(client, &test_data, 1);
+ //ret =i2c_master_reg8_recv(client, 0x00, buf, 2, 200*1000);//i2c_write_bytes(client, &test_data, 1); //Test I2C connection.
+ if (ret == 1)
+ break;
+ dev_info(&client->dev, "GT811 I2C TEST FAILED!Please check the HARDWARE connect\n");
+ }
+
+ if(ret <= 0)
+ {
+ dev_err(&client->dev, "Warnning: I2C communication might be ERROR!\n");
+ goto err_i2c_failed;
+ }
+
+ INIT_WORK(&ts->work, goodix_ts_work_func); //init work_struct
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+ pdata = client->dev.platform_data;
+/////////////////////////////// UPDATE STEP 1 START/////////////////////////////////////////////////////////////////
+#ifdef AUTO_UPDATE_GT811 //modify by andrew
+ msleep(20);
+ goodix_read_version(ts);
+
+ ret = gt811_downloader( ts, goodix_gt811_firmware);
+ if(ret < 0)
+ {
+ dev_err(&client->dev, "Warnning: gt811 update might be ERROR!\n");
+ //goto err_input_dev_alloc_failed;
+ }
+#endif
+///////////////////////////////UPDATE STEP 1 END////////////////////////////////////////////////////////////////
+#ifdef INT_PORT
+ client->irq=TS_INT; //If not defined in client
+ if (client->irq)
+ {
+ gpio_free(INT_PORT);
+ ret = gpio_request(INT_PORT, "TS_INT"); //Request IO
+ if (ret < 0)
+ {
+ dev_err(&client->dev, "Failed to request GPIO:%d, ERRNO:%d\n",(int)INT_PORT,ret);
+ goto err_gpio_request_failed;
+ }
+
+ gpio_pull_updown(INT_PORT, NULL); //ret > 0 ?
+
+
+ #ifndef STOP_IRQ_TYPE
+ ts->irq = TS_INT; //KT ADD 1202
+ ts->irq_is_disable = 0; // enable irq
+ #endif
+ }
+#endif
+
+err_gpio_request_failed:
+ for(retry=0; retry<3; retry++)
+ {
+ ret=goodix_init_panel(ts);
+ msleep(2);
+ if(ret != 0) //Initiall failed
+ continue;
+ else
+ break;
+ }
+ if(ret != 0)
+ {
+ ts->bad_data=1;
+ goto err_init_godix_ts;
+ }
+
+ ts->input_dev = input_allocate_device();
+ if (ts->input_dev == NULL)
+ {
+ ret = -ENOMEM;
+ dev_dbg(&client->dev,"goodix_ts_probe: Failed to allocate input device\n");
+ goto err_input_dev_alloc_failed;
+ }
+
+ //ts->input_dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) ;
+ //ts->input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ //////ts->input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+#ifdef HAVE_TOUCH_KEY
+ for(retry = 0; retry < MAX_KEY_NUM; retry++)
+ {
+ input_set_capability(ts->input_dev,EV_KEY,touch_key_array[retry]);
+ }
+#endif
+/*
+ input_set_abs_params(ts->input_dev, ABS_X, 0, ts->abs_x_max, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_Y, 0, ts->abs_y_max, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+*/
+#ifdef GOODIX_MULTI_TOUCH
+
+ __set_bit(INPUT_PROP_DIRECT, ts->input_dev->propbit);
+ __set_bit(EV_ABS, ts->input_dev->evbit);
+
+ input_mt_init_slots(ts->input_dev, ts->max_touch_num);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, ts->abs_x_max, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, ts->abs_y_max, 0, 0);
+
+
+#endif
+
+ sprintf(ts->phys, "input/ts");
+ ts->input_dev->name = s3c_ts_name;
+ ts->input_dev->phys = ts->phys;
+ ts->input_dev->id.bustype = BUS_I2C;
+ ts->input_dev->id.vendor = 0xDEAD;
+ ts->input_dev->id.product = 0xBEEF;
+ ts->input_dev->id.version = 10427; //screen firmware version
+
+ ret = input_register_device(ts->input_dev);
+ if (ret) {
+ dev_err(&client->dev,"Probe: Unable to register %s input device\n", ts->input_dev->name);
+ goto err_input_register_device_failed;
+ }
+ ts->bad_data = 0;
+
+#ifdef INT_PORT
+ ret = request_irq(TS_INT, goodix_ts_irq_handler ,irq_table[ts->int_trigger_type],
+ client->name, ts);
+ if (ret != 0)
+ {
+ dev_err(&client->dev,"Cannot allocate ts INT!ERRNO:%d\n", ret);
+ gpio_direction_input(INT_PORT);
+ gpio_free(INT_PORT);
+ goto err_init_godix_ts;
+ }
+ else
+ {
+ #ifndef STOP_IRQ_TYPE
+ gt811_irq_disable(ts); //KT ADD 1202
+ //#define
+ // disable_irq(client->irq);
+ #endif
+ ts->use_irq = 1;
+ dev_dbg(&client->dev,"Reques EIRQ %d succesd on GPIO:%d\n",TS_INT,INT_PORT);
+ }
+#endif
+
+
+ if (!ts->use_irq)
+ {
+ hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ ts->timer.function = goodix_ts_timer_func;
+ hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+ }
+
+ if(ts->use_irq)
+ #ifndef STOP_IRQ_TYPE
+ gt811_irq_enable(ts); //KT ADD 1202
+ //#elif
+ // enable_irq(client->irq);
+ #endif
+
+ ts->power = goodix_ts_power;
+
+ goodix_read_version(ts);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ ts->early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;//EARLY_SUSPEND_LEVEL_BLANK_SCREEN +1;
+ ts->early_suspend.suspend = goodix_ts_early_suspend;
+ ts->early_suspend.resume = goodix_ts_late_resume;
+ register_early_suspend(&ts->early_suspend);
+#endif
+
+/////////////////////////////// UPDATE STEP 2 START /////////////////////////////////////////////////////////////////
+#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP
+ goodix_proc_entry = create_proc_entry("goodix-update", 0666, NULL);
+ if(goodix_proc_entry == NULL)
+ {
+ dev_info(&client->dev, "Couldn't create proc entry!\n");
+ ret = -ENOMEM;
+ goto err_create_proc_entry;
+ }
+ else
+ {
+ dev_info(&client->dev, "Create proc entry success!\n");
+ goodix_proc_entry->write_proc = goodix_update_write;
+ goodix_proc_entry->read_proc = goodix_update_read;
+ }
+#endif
+///////////////////////////////UPDATE STEP 2 END /////////////////////////////////////////////////////////////////
+ dev_info(&client->dev,"Start %s in %s mode,Driver Modify Date:2012-01-05\n",
+ ts->input_dev->name, ts->use_irq ? "interrupt" : "polling");
+ return 0;
+
+err_init_godix_ts:
+ i2c_end_cmd(ts);
+ if(ts->use_irq)
+ {
+ ts->use_irq = 0;
+ free_irq(client->irq,ts);
+ #ifdef INT_PORT
+ gpio_direction_input(INT_PORT);
+ gpio_free(INT_PORT);
+ #endif
+ }
+ else
+ hrtimer_cancel(&ts->timer);
+
+err_input_register_device_failed:
+ input_free_device(ts->input_dev);
+
+err_input_dev_alloc_failed:
+ i2c_set_clientdata(client, NULL);
+err_gpio_request:
+ gpio_free(SHUTDOWN_PORT);
+err_i2c_failed:
+ kfree(ts);
+err_alloc_data_failed:
+err_check_functionality_failed:
+err_create_proc_entry:
+ return ret;
+}
+
+
+/*******************************************************
+Function:
+ Drive the release of resources
+Parameters:
+ client: the device structure
+return:
+ Results of the implementation code, 0 for normal execution
+********************************************************/
+static int goodix_ts_remove(struct i2c_client *client)
+{
+ struct gt811_ts_data *ts = i2c_get_clientdata(client);
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ unregister_early_suspend(&ts->early_suspend);
+#endif
+/////////////////////////////// UPDATE STEP 3 START/////////////////////////////////////////////////////////////////
+#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP
+ remove_proc_entry("goodix-update", NULL);
+#endif
+/////////////////////////////////UPDATE STEP 3 END///////////////////////////////////////////////////////////////
+
+ if (ts && ts->use_irq)
+ {
+ #ifdef INT_PORT
+ gpio_direction_input(INT_PORT);
+ gpio_free(INT_PORT);
+ #endif
+ free_irq(client->irq, ts);
+ }
+ else if(ts)
+ hrtimer_cancel(&ts->timer);
+
+ dev_notice(&client->dev,"The driver is removing...\n");
+ i2c_set_clientdata(client, NULL);
+ input_unregister_device(ts->input_dev);
+ kfree(ts);
+ return 0;
+}
+
+//åç¨è®¾å¤
+static int goodix_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ int ret;
+ struct gt811_ts_data *ts = i2c_get_clientdata(client);
+ disable_irq(client->irq);
+ if (ts->power)
+ {
+ }
+}
+static int goodix_ts_resume(struct i2c_client *client)
+{
+ int ret;
+ struct gt811_ts_data *ts = i2c_get_clientdata(client);
+
+ if (ts->power) {
+ ret = ts->power(ts, 1);
+ printk("resume >>>>>>>>>ret=%d",ret);
+ if (ret < 0)
+ printk(KERN_ERR "goodix_ts_resume power on failed\n");
+ }
+ enable_irq(client->irq);
+ return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void goodix_ts_early_suspend(struct early_suspend *h)
+{
+ struct gt811_ts_data *ts;
+ ts = container_of(h, struct gt811_ts_data, early_suspend);
+ goodix_ts_suspend(ts->client, PMSG_SUSPEND);
+}
+
+static void goodix_ts_late_resume(struct early_suspend *h)
+{
+ struct gt811_ts_data *ts;
+ ts = container_of(h, struct gt811_ts_data, early_suspend);
+ goodix_ts_resume(ts->client);
+}
+#endif
+/////////////////////////////// UPDATE STEP 4 START/////////////////////////////////////////////////////////////////
+//******************************Begin of firmware update surpport*******************************
+#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP
+static struct file * update_file_open(char * path, mm_segment_t * old_fs_p)
+{
+ struct file * filp = NULL;
+ int errno = -1;
+
+ filp = filp_open(path, O_RDONLY, 0644);
+
+ if(!filp || IS_ERR(filp))
+ {
+ if(!filp)
+ errno = -ENOENT;
+ else
+ errno = PTR_ERR(filp);
+ printk(KERN_ERR "The update file for Guitar open error.\n");
+ return NULL;
+ }
+ *old_fs_p = get_fs();
+ set_fs(get_ds());
+
+ filp->f_op->llseek(filp,0,0);
+ return filp ;
+}
+
+static void update_file_close(struct file * filp, mm_segment_t old_fs)
+{
+ set_fs(old_fs);
+ if(filp)
+ filp_close(filp, NULL);
+}
+static int update_get_flen(char * path)
+{
+ struct file * file_ck = NULL;
+ mm_segment_t old_fs;
+ int length ;
+
+ file_ck = update_file_open(path, &old_fs);
+ if(file_ck == NULL)
+ return 0;
+
+ length = file_ck->f_op->llseek(file_ck, 0, SEEK_END);
+ //printk("File length: %d\n", length);
+ if(length < 0)
+ length = 0;
+ update_file_close(file_ck, old_fs);
+ return length;
+}
+
+static int goodix_update_write(struct file *filp, const char __user *buff, unsigned long len, void *data)
+{
+ unsigned char cmd[120];
+ int ret = -1;
+ int retry = 0;
+ static unsigned char update_path[60];
+ struct gt811_ts_data *ts;
+ struct file * file_data = NULL;
+ mm_segment_t old_fs;
+ unsigned char *file_ptr = NULL;
+ unsigned int file_len;
+
+ ts = i2c_get_clientdata(i2c_connect_client);
+ if(ts==NULL)
+ {
+ printk(KERN_INFO"goodix write to kernel via proc file!@@@@@@\n");
+ return 0;
+ }
+
+ //printk(KERN_INFO"goodix write to kernel via proc file!@@@@@@\n");
+ if(copy_from_user(&cmd, buff, len))
+ {
+ printk(KERN_INFO"goodix write to kernel via proc file!@@@@@@\n");
+ return -EFAULT;
+ }
+ //printk(KERN_INFO"Write cmd is:%d,write len is:%ld\n",cmd[0], len);
+ switch(cmd[0])
+ {
+ case APK_UPDATE_TP:
+ printk(KERN_INFO"Write cmd is:%d,cmd arg is:%s,write len is:%ld\n",cmd[0], &cmd[1], len);
+ memset(update_path, 0, 60);
+ strncpy(update_path, cmd+1, 60);
+
+#ifndef STOP_IRQ_TYPE
+ gt811_irq_disable(ts); //KT ADD 1202
+//#elif
+// disable_irq(ts->client->irq);
+#endif
+ file_data = update_file_open(update_path, &old_fs);
+ if(file_data == NULL) //file_data has been opened at the last time
+ {
+ dev_info(&ts->client->dev, "cannot open update file\n");
+ return 0;
+ }
+
+ file_len = update_get_flen(update_path);
+ dev_info(&ts->client->dev, "Update file length:%d\n", file_len);
+ file_ptr = (unsigned char*)vmalloc(file_len);
+ if(file_ptr==NULL)
+ {
+ dev_info(&ts->client->dev, "cannot malloc memory!\n");
+ return 0;
+ }
+
+ ret = file_data->f_op->read(file_data, file_ptr, file_len, &file_data->f_pos);
+ if(ret <= 0)
+ {
+ dev_info(&ts->client->dev, "read file data failed\n");
+ return 0;
+ }
+ update_file_close(file_data, old_fs);
+
+ ret = gt811_downloader(ts, file_ptr);
+ vfree(file_ptr);
+ if(ret < 0)
+ {
+ printk(KERN_INFO"Warnning: GT811 update might be ERROR!\n");
+ return 0;
+ }
+
+ // i2c_pre_cmd(ts);
+
+ gpio_direction_output(SHUTDOWN_PORT, 0);
+ msleep(5);
+ gpio_direction_input(SHUTDOWN_PORT);
+ msleep(20);
+ for(retry=0; retry<3; retry++)
+ {
+ ret=goodix_init_panel(ts);
+ msleep(2);
+ if(ret != 0) //Initiall failed
+ {
+ dev_info(&ts->client->dev, "Init panel failed!\n");
+ continue;
+ }
+ else
+ break;
+
+ }
+
+ // s3c_gpio_cfgpin(INT_PORT, INT_CFG); //Set IO port function
+ //gpio_direction_input(INT_PORT);
+// s3c_gpio_setpull(INT_PORT, S3C_GPIO_PULL_UP);
+// s3c_gpio_cfgpin(INT_PORT, INT_CFG); //Set IO port as interrupt port
+ //s3c_gpio_setpull(INT_PORT, S3C_GPIO_PULL_NONE);
+// while(1);
+#ifndef STOP_IRQ_TYPE
+ gt811_irq_enable(ts); //KT ADD 1202
+//#elif
+// enable_irq(ts->client->irq);
+#endif
+// i2c_end_cmd(ts);
+ return 1;
+
+ case APK_READ_FUN: //functional command
+ if(cmd[1] == CMD_READ_VER)
+ {
+ printk(KERN_INFO"Read version!\n");
+ ts->read_mode = MODE_RD_VER;
+ }
+ else if(cmd[1] == CMD_READ_CFG)
+ {
+ printk(KERN_INFO"Read config info!\n");
+
+ ts->read_mode = MODE_RD_CFG;
+ }
+ else if (cmd[1] == CMD_READ_RAW)
+ {
+ printk(KERN_INFO"Read raw data!\n");
+
+ ts->read_mode = MODE_RD_RAW;
+ }
+ else if (cmd[1] == CMD_READ_CHIP_TYPE)
+ {
+ printk(KERN_INFO"Read chip type!\n");
+
+ ts->read_mode = MODE_RD_CHIP_TYPE;
+ }
+ return 1;
+
+ case APK_WRITE_CFG:
+ printk(KERN_INFO"Begin write config info!Config length:%d\n",cmd[1]);
+ i2c_pre_cmd(ts);
+ ret = i2c_write_bytes(ts->client, cmd+2, cmd[1]+2);
+ i2c_end_cmd(ts);
+ if(ret != 1)
+ {
+ printk("Write Config failed!return:%d\n",ret);
+ return -1;
+ }
+ return 1;
+
+ default:
+ return 0;
+ }
+ return 0;
+}
+
+static int goodix_update_read( char *page, char **start, off_t off, int count, int *eof, void *data )
+{
+ int ret = -1;
+ int len = 0;
+ int read_times = 0;
+ struct gt811_ts_data *ts;
+
+ unsigned char read_data[360] = {80, };
+
+ ts = i2c_get_clientdata(i2c_connect_client);
+ if(ts==NULL)
+ return 0;
+
+ printk("___READ__\n");
+ if(ts->read_mode == MODE_RD_VER) //read version data
+ {
+ i2c_pre_cmd(ts);
+ ret = goodix_read_version(ts);
+ i2c_end_cmd(ts);
+ if(ret < 0)
+ {
+ printk(KERN_INFO"Read version data failed!\n");
+ return 0;
+ }
+
+ read_data[1] = (char)(ts->version&0xff);
+ read_data[0] = (char)((ts->version>>8)&0xff);
+
+ memcpy(page, read_data, 2);
+ //*eof = 1;
+ return 2;
+ }
+ else if (ts->read_mode == MODE_RD_CHIP_TYPE)
+ {
+ page[0] = GT811;
+ return 1;
+ }
+ else if(ts->read_mode == MODE_RD_CFG)
+ {
+
+ read_data[0] = 0x06;
+ read_data[1] = 0xa2; // cfg start address
+ printk("read config addr is:%x,%x\n", read_data[0],read_data[1]);
+
+ len = 106;
+ i2c_pre_cmd(ts);
+ ret = i2c_read_bytes(ts->client, read_data, len+2);
+ i2c_end_cmd(ts);
+ if(ret <= 0)
+ {
+ printk(KERN_INFO"Read config info failed!\n");
+ return 0;
+ }
+
+ memcpy(page, read_data+2, len);
+ return len;
+ }
+ else if (ts->read_mode == MODE_RD_RAW)
+ {
+#define TIMEOUT (-100)
+ int retry = 0;
+ if (raw_data_ready != RAW_DATA_READY)
+ {
+ raw_data_ready = RAW_DATA_ACTIVE;
+ }
+
+RETRY:
+ read_data[0] = 0x07;
+ read_data[1] = 0x11;
+ read_data[2] = 0x01;
+
+ ret = i2c_write_bytes(ts->client, read_data, 3);
+
+#ifdef DEBUG
+ sum += read_times;
+ printk("count :%d\n", ++access_count);
+ printk("A total of try times:%d\n", sum);
+#endif
+
+ read_times = 0;
+ while (RAW_DATA_READY != raw_data_ready)
+ {
+ msleep(4);
+
+ if (read_times++ > 10)
+ {
+ if (retry++ > 5)
+ {
+ return TIMEOUT;
+ }
+ goto RETRY;
+ }
+ }
+#ifdef DEBUG
+ printk("read times:%d\n", read_times);
+#endif
+ read_data[0] = 0x08;
+ read_data[1] = 0x80; // raw data address
+
+ len = 160;
+
+ // msleep(4);
+
+ i2c_pre_cmd(ts);
+ ret = i2c_read_bytes(ts->client, read_data, len+2);
+ // i2c_end_cmd(ts);
+
+ if(ret <= 0)
+ {
+ printk(KERN_INFO"Read raw data failed!\n");
+ return 0;
+ }
+ memcpy(page, read_data+2, len);
+
+ read_data[0] = 0x09;
+ read_data[1] = 0xC0;
+ // i2c_pre_cmd(ts);
+ ret = i2c_read_bytes(ts->client, read_data, len+2);
+ i2c_end_cmd(ts);
+
+ if(ret <= 0)
+ {
+ printk(KERN_INFO"Read raw data failed!\n");
+ return 0;
+ }
+ memcpy(&page[160], read_data+2, len);
+
+#ifdef DEBUG
+//**************
+ for (i = 0; i < 300; i++)
+ {
+ printk("%6x", page[i]);
+
+ if ((i+1) % 10 == 0)
+ {
+ printk("\n");
+ }
+ }
+//********************/
+#endif
+ raw_data_ready = RAW_DATA_NON_ACTIVE;
+
+ return (2*len);
+
+ }
+ return 0;
+#endif
+}
+//********************************************************************************************
+static u8 is_equal( u8 *src , u8 *dst , int len )
+{
+ int i;
+
+#if 0
+ for( i = 0 ; i < len ; i++ )
+ {
+ printk(KERN_INFO"[%02X:%02X]", src[i], dst[i]);
+ if((i+1)%10==0)printk("\n");
+ }
+#endif
+
+ for( i = 0 ; i < len ; i++ )
+ {
+ if ( src[i] != dst[i] )
+ {
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static u8 gt811_nvram_store( struct gt811_ts_data *ts )
+{
+ int ret;
+ int i;
+ u8 inbuf[3] = {REG_NVRCS_H,REG_NVRCS_L,0};
+ //u8 outbuf[3] = {};
+ ret = i2c_read_bytes( ts->client, inbuf, 3 );
+
+ if ( ret < 0 )
+ {
+ return 0;
+ }
+
+ if ( ( inbuf[2] & BIT_NVRAM_LOCK ) == BIT_NVRAM_LOCK )
+ {
+ return 0;
+ }
+
+ inbuf[2] = (1<<BIT_NVRAM_STROE); //store command
+
+ for ( i = 0 ; i < 300 ; i++ )
+ {
+ ret = i2c_write_bytes( ts->client, inbuf, 3 );
+
+ if ( ret < 0 )
+ break;
+ }
+
+ return ret;
+}
+
+static u8 gt811_nvram_recall( struct gt811_ts_data *ts )
+{
+ int ret;
+ u8 inbuf[3] = {REG_NVRCS_H,REG_NVRCS_L,0};
+
+ ret = i2c_read_bytes( ts->client, inbuf, 3 );
+
+ if ( ret < 0 )
+ {
+ return 0;
+ }
+
+ if ( ( inbuf[2]&BIT_NVRAM_LOCK) == BIT_NVRAM_LOCK )
+ {
+ return 0;
+ }
+
+ inbuf[2] = ( 1 << BIT_NVRAM_RECALL ); //recall command
+ ret = i2c_write_bytes( ts->client , inbuf, 3);
+ return ret;
+}
+
+static int gt811_reset( struct gt811_ts_data *ts )
+{
+ int ret = 1;
+ u8 retry;
+
+ unsigned char outbuf[3] = {0,0xff,0};
+ unsigned char inbuf[3] = {0,0xff,0};
+ //outbuf[1] = 1;
+
+ gpio_direction_output(SHUTDOWN_PORT,0);
+ msleep(20);
+ gpio_direction_input(SHUTDOWN_PORT);
+ msleep(100);
+ for(retry=0;retry < 80; retry++)
+ {
+ ret =i2c_write_bytes(ts->client, inbuf, 0); //Test I2C connection.
+ if (ret > 0)
+ {
+ msleep(10);
+ ret =i2c_read_bytes(ts->client, inbuf, 3); //Test I2C connection.
+ if (ret > 0)
+ {
+ if(inbuf[2] == 0x55)
+ {
+ ret =i2c_write_bytes(ts->client, outbuf, 3);
+ msleep(10);
+ break;
+ }
+ }
+ }
+ else
+ {
+ gpio_direction_output(SHUTDOWN_PORT,0);
+ msleep(20);
+ gpio_direction_input(SHUTDOWN_PORT);
+ msleep(20);
+ dev_info(&ts->client->dev, "i2c address failed\n");
+ }
+
+ }
+ dev_info(&ts->client->dev, "Detect address %0X\n", ts->client->addr);
+ //msleep(500);
+ return ret;
+}
+
+static int gt811_reset2( struct gt811_ts_data *ts )
+{
+ int ret = 1;
+ u8 retry;
+
+ //unsigned char outbuf[3] = {0,0xff,0};
+ unsigned char inbuf[3] = {0,0xff,0};
+ //outbuf[1] = 1;
+
+ gpio_direction_output(SHUTDOWN_PORT,0);
+ msleep(20);
+ gpio_direction_input(SHUTDOWN_PORT);
+ msleep(100);
+ for(retry=0;retry < 80; retry++)
+ {
+ ret =i2c_write_bytes(ts->client, inbuf, 0); //Test I2C connection.
+ if (ret > 0)
+ {
+ msleep(10);
+ ret =i2c_read_bytes(ts->client, inbuf, 3); //Test I2C connection.
+ if (ret > 0)
+ {
+ // if(inbuf[2] == 0x55)
+ // {
+ // ret =i2c_write_bytes(ts->client, outbuf, 3);
+ // msleep(10);
+ break;
+ // }
+ }
+ }
+
+ }
+ dev_info(&ts->client->dev, "Detect address %0X\n", ts->client->addr);
+ //msleep(500);
+ return ret;
+}
+static int gt811_set_address_2( struct gt811_ts_data *ts )
+{
+ unsigned char inbuf[3] = {0,0,0};
+ int i;
+
+ for ( i = 0 ; i < 12 ; i++ )
+ {
+ if ( i2c_read_bytes( ts->client, inbuf, 3) )
+ {
+ dev_info(&ts->client->dev, "Got response\n");
+ return 1;
+ }
+ dev_info(&ts->client->dev, "wait for retry\n");
+ msleep(50);
+ }
+ return 0;
+}
+static u8 gt811_update_firmware( u8 *nvram, u16 start_addr, u16 length, struct gt811_ts_data *ts)
+{
+ u8 ret,err,retry_time,i;
+ u16 cur_code_addr;
+ u16 cur_frame_num, total_frame_num, cur_frame_len;
+ u32 gt80x_update_rate;
+
+ unsigned char i2c_data_buf[PACK_SIZE+2] = {0,};
+ unsigned char i2c_chk_data_buf[PACK_SIZE+2] = {0,};
+
+ if( length > NVRAM_LEN - NVRAM_BOOT_SECTOR_LEN )
+ {
+ dev_info(&ts->client->dev, "Fw length %d is bigger than limited length %d\n", length, NVRAM_LEN - NVRAM_BOOT_SECTOR_LEN );
+ return 0;
+ }
+
+ total_frame_num = ( length + PACK_SIZE - 1) / PACK_SIZE;
+
+ //gt80x_update_sta = _UPDATING;
+ gt80x_update_rate = 0;
+
+ for( cur_frame_num = 0 ; cur_frame_num < total_frame_num ; cur_frame_num++ )
+ {
+ retry_time = 5;
+
+ dev_info(&ts->client->dev, "PACK[%d]\n",cur_frame_num);
+ cur_code_addr = /*NVRAM_UPDATE_START_ADDR*/start_addr + cur_frame_num * PACK_SIZE;
+ i2c_data_buf[0] = (cur_code_addr>>8)&0xff;
+ i2c_data_buf[1] = cur_code_addr&0xff;
+
+ i2c_chk_data_buf[0] = i2c_data_buf[0];
+ i2c_chk_data_buf[1] = i2c_data_buf[1];
+
+ if( cur_frame_num == total_frame_num - 1 )
+ {
+ cur_frame_len = length - cur_frame_num * PACK_SIZE;
+ }
+ else
+ {
+ cur_frame_len = PACK_SIZE;
+ }
+
+ //strncpy(&i2c_data_buf[2], &nvram[cur_frame_num*PACK_SIZE], cur_frame_len);
+ for(i=0;i<cur_frame_len;i++)
+ {
+ i2c_data_buf[2+i] = nvram[cur_frame_num*PACK_SIZE+i];
+ }
+ do
+ {
+ err = 0;
+
+ //ret = gt811_i2c_write( guitar_i2c_address, cur_code_addr, &nvram[cur_frame_num*I2C_FRAME_MAX_LENGTH], cur_frame_len );
+ ret = i2c_write_bytes(ts->client, i2c_data_buf, (cur_frame_len+2));
+ if ( ret <= 0 )
+ {
+ dev_info(&ts->client->dev, "write fail\n");
+ err = 1;
+ }
+
+ ret = i2c_read_bytes(ts->client, i2c_chk_data_buf, (cur_frame_len+2));
+ // ret = gt811_i2c_read( guitar_i2c_address, cur_code_addr, inbuf, cur_frame_len);
+ if ( ret <= 0 )
+ {
+ dev_info(&ts->client->dev, "read fail\n");
+ err = 1;
+ }
+
+ if( is_equal( &i2c_data_buf[2], &i2c_chk_data_buf[2], cur_frame_len ) == 0 )
+ {
+ dev_info(&ts->client->dev, "not equal\n");
+ err = 1;
+ }
+
+ } while ( err == 1 && (--retry_time) > 0 );
+
+ if( err == 1 )
+ {
+ break;
+ }
+
+ gt80x_update_rate = ( cur_frame_num + 1 )*128/total_frame_num;
+
+ }
+
+ if( err == 1 )
+ {
+ dev_info(&ts->client->dev, "write nvram fail\n");
+ return 0;
+ }
+
+ ret = gt811_nvram_store(ts);
+
+ msleep( 20 );
+
+ if( ret == 0 )
+ {
+ dev_info(&ts->client->dev, "nvram store fail\n");
+ return 0;
+ }
+
+ ret = gt811_nvram_recall(ts);
+
+ msleep( 20 );
+
+ if( ret == 0 )
+ {
+ dev_info(&ts->client->dev, "nvram recall fail\n");
+ return 0;
+ }
+
+ for ( cur_frame_num = 0 ; cur_frame_num < total_frame_num ; cur_frame_num++ ) // read out all the code
+ {
+
+ cur_code_addr = NVRAM_UPDATE_START_ADDR + cur_frame_num*PACK_SIZE;
+ retry_time=5;
+ i2c_chk_data_buf[0] = (cur_code_addr>>8)&0xff;
+ i2c_chk_data_buf[1] = cur_code_addr&0xff;
+
+
+ if ( cur_frame_num == total_frame_num-1 )
+ {
+ cur_frame_len = length - cur_frame_num*PACK_SIZE;
+ }
+ else
+ {
+ cur_frame_len = PACK_SIZE;
+ }
+
+ do
+ {
+ err = 0;
+ //ret = gt811_i2c_read( guitar_i2c_address, cur_code_addr, inbuf, cur_frame_len);
+ ret = i2c_read_bytes(ts->client, i2c_chk_data_buf, (cur_frame_len+2));
+
+ if ( ret == 0 )
+ {
+ err = 1;
+ }
+
+ if( is_equal( &nvram[cur_frame_num*PACK_SIZE], &i2c_chk_data_buf[2], cur_frame_len ) == 0 )
+ {
+ err = 1;
+ }
+ } while ( err == 1 && (--retry_time) > 0 );
+
+ if( err == 1 )
+ {
+ break;
+ }
+
+ gt80x_update_rate = 127 + ( cur_frame_num + 1 )*128/total_frame_num;
+ }
+
+ gt80x_update_rate = 255;
+ //gt80x_update_sta = _UPDATECHKCODE;
+
+ if( err == 1 )
+ {
+ dev_info(&ts->client->dev, "nvram validate fail\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+static u8 gt811_update_proc( u8 *nvram, u16 start_addr , u16 length, struct gt811_ts_data *ts )
+{
+ u8 ret;
+ u8 error = 0;
+ //struct tpd_info_t tpd_info;
+ GT811_SET_INT_PIN( 0 );
+ msleep( 20 );
+ ret = gt811_reset(ts);
+ if ( ret < 0 )
+ {
+ error = 1;
+ dev_info(&ts->client->dev, "reset fail\n");
+ goto end;
+ }
+
+ ret = gt811_set_address_2( ts );
+ if ( ret == 0 )
+ {
+ error = 1;
+ dev_info(&ts->client->dev, "set address fail\n");
+ goto end;
+ }
+
+ ret = gt811_update_firmware( nvram, start_addr, length, ts);
+ if ( ret == 0 )
+ {
+ error=1;
+ dev_info(&ts->client->dev, "firmware update fail\n");
+ goto end;
+ }
+
+end:
+ GT811_SET_INT_PIN( 1 );
+// gpio_free(INT_PORT);
+ gpio_pull_updown(INT_PORT, NULL);
+
+ msleep( 500 );
+ ret = gt811_reset2(ts);
+ if ( ret < 0 )
+ {
+ error=1;
+ dev_info(&ts->client->dev, "final reset fail\n");
+ goto end;
+ }
+ if ( error == 1 )
+ {
+ return 0;
+ }
+
+// i2c_pre_cmd(ts);
+ while(goodix_read_version(ts)<0);
+
+// i2c_end_cmd(ts);
+ return 1;
+}
+
+u16 Little2BigEndian(u16 little_endian)
+{
+ u16 temp = 0;
+ temp = little_endian&0xff;
+ return (temp<<8)+((little_endian>>8)&0xff);
+}
+
+int gt811_downloader( struct gt811_ts_data *ts, unsigned char * data)
+{
+ struct tpd_firmware_info_t *fw_info = (struct tpd_firmware_info_t *)data;
+ //int i;
+ //unsigned short checksum = 0;
+ //unsigned int checksum = 0;
+ unsigned int fw_checksum = 0;
+ //unsigned char fw_chip_type;
+ unsigned short fw_version;
+ unsigned short fw_start_addr;
+ unsigned short fw_length;
+ unsigned char *data_ptr;
+ //unsigned char *file_ptr = &(fw_info->chip_type);
+ int retry = 0,ret;
+ int err = 0;
+ unsigned char rd_buf[4] = {0};
+ unsigned char *mandatory_base = "GOODIX";
+ unsigned char rd_rom_version;
+ unsigned char rd_chip_type;
+ unsigned char rd_nvram_flag;
+
+ //struct file * file_data = NULL;
+ //mm_segment_t old_fs;
+ //unsigned int rd_len;
+ //unsigned int file_len = 0;
+ //unsigned char i2c_data_buf[PACK_SIZE] = {0,};
+
+ rd_buf[0]=0x14;
+ rd_buf[1]=0x00;
+ rd_buf[2]=0x80;
+ ret = i2c_write_bytes(ts->client, rd_buf, 3);
+ if(ret<0)
+ {
+ dev_info(&ts->client->dev, "i2c write failed\n");
+ goto exit_downloader;
+ }
+ rd_buf[0]=0x40;
+ rd_buf[1]=0x11;
+ ret = i2c_read_bytes(ts->client, rd_buf, 3);
+ if(ret<=0)
+ {
+ dev_info(&ts->client->dev, "i2c request failed!\n");
+ goto exit_downloader;
+ }
+ rd_chip_type = rd_buf[2];
+ rd_buf[0]=0xFB;
+ rd_buf[1]=0xED;
+ ret = i2c_read_bytes(ts->client, rd_buf, 3);
+ if(ret<=0)
+ {
+ dev_info(&ts->client->dev, "i2c read failed!\n");
+ goto exit_downloader;
+ }
+ rd_rom_version = rd_buf[2];
+ rd_buf[0]=0x06;
+ rd_buf[1]=0x94;
+ ret = i2c_read_bytes(ts->client, rd_buf, 3);
+ if(ret<=0)
+ {
+ dev_info(&ts->client->dev, "i2c read failed!\n");
+ goto exit_downloader;
+ }
+ rd_nvram_flag = rd_buf[2];
+
+ fw_version = Little2BigEndian(fw_info->version);
+ fw_start_addr = Little2BigEndian(fw_info->start_addr);
+ fw_length = Little2BigEndian(fw_info->length);
+ data_ptr = &(fw_info->data);
+
+ dev_info(&ts->client->dev,"chip_type=0x%02x\n", fw_info->chip_type);
+ dev_info(&ts->client->dev,"version=0x%04x\n", fw_version);
+ dev_info(&ts->client->dev,"rom_version=0x%02x\n",fw_info->rom_version);
+ dev_info(&ts->client->dev,"start_addr=0x%04x\n",fw_start_addr);
+ dev_info(&ts->client->dev,"file_size=0x%04x\n",fw_length);
+ fw_checksum = ((u32)fw_info->checksum[0]<<16) + ((u32)fw_info->checksum[1]<<8) + ((u32)fw_info->checksum[2]);
+ dev_info(&ts->client->dev,"fw_checksum=0x%06x\n",fw_checksum);
+ dev_info(&ts->client->dev,"%s\n", __func__ );
+ dev_info(&ts->client->dev,"current version 0x%04X, target verion 0x%04X\n", ts->version, fw_version );
+
+//chk_chip_type:
+ if(rd_chip_type!=fw_info->chip_type)
+ {
+ dev_info(&ts->client->dev, "Chip type not match,exit downloader\n");
+ goto exit_downloader;
+ }
+
+//chk_mask_version:
+ if(!rd_rom_version)
+ {
+ if(fw_info->rom_version!=0x45)
+ {
+ dev_info(&ts->client->dev, "Rom version not match,exit downloader\n");
+ goto exit_downloader;
+ }
+ dev_info(&ts->client->dev, "Rom version E.\n");
+ goto chk_fw_version;
+ }
+ else if(rd_rom_version!=fw_info->rom_version);
+ {
+ dev_info(&ts->client->dev, "Rom version not match,exidownloader\n");
+ goto exit_downloader;
+ }
+ dev_info(&ts->client->dev, "Rom version %c\n",rd_rom_version);
+
+//chk_nvram:
+ if(rd_nvram_flag==0x55)
+ {
+ dev_info(&ts->client->dev, "NVRAM correct!\n");
+ goto chk_fw_version;
+ }
+ else if(rd_nvram_flag==0xAA)
+ {
+ dev_info(&ts->client->dev, "NVRAM incorrect!Need update.\n");
+ goto begin_upgrade;
+ }
+ else
+ {
+ dev_info(&ts->client->dev, "NVRAM other error![0x694]=0x%02x\n", rd_nvram_flag);
+ goto begin_upgrade;
+ }
+chk_fw_version:
+// ts->version -= 1; //test by andrew
+ if( ts->version >= fw_version ) // current low byte higher than back-up low byte
+ {
+ dev_info(&ts->client->dev, "Fw verison not match.\n");
+ goto chk_mandatory_upgrade;
+ }
+ dev_info(&ts->client->dev,"Need to upgrade\n");
+ goto begin_upgrade;
+chk_mandatory_upgrade:
+// dev_info(&ts->client->dev, "%s\n", mandatory_base);
+// dev_info(&ts->client->dev, "%s\n", fw_info->mandatory_flag);
+ ret = memcmp(mandatory_base, fw_info->mandatory_flag, 6);
+ if(ret)
+ {
+ dev_info(&ts->client->dev,"Not meet mandatory upgrade,exit downloader!ret:%d\n", ret);
+ goto exit_downloader;
+ }
+ dev_info(&ts->client->dev, "Mandatory upgrade!\n");
+begin_upgrade:
+ dev_info(&ts->client->dev, "Begin upgrade!\n");
+ // goto exit_downloader;
+ dev_info(&ts->client->dev,"STEP_0:\n");
+
+
+ dev_info(&ts->client->dev, "STEP_1:\n");
+ err = -1;
+ while( retry < 3 )
+ {
+// ret = gt811_update_proc( data_ptr,fw_start_addr, fw_length, ts);
+ if(ret == 1)
+ {
+ err = 1;
+ break;
+ }
+ retry++;
+ }
+
+exit_downloader:
+ //mt_set_gpio_mode(GPIO_CTP_EINT_PIN, GPIO_CTP_EINT_PIN_M_EINT);
+ // mt_set_gpio_out(GPIO_CTP_EN_PIN, GPIO_OUT_ONE);
+ // gpio_direction_output(INT_PORT,1);
+ // msleep(1);
+ gpio_free(INT_PORT);
+ gpio_pull_updown(INT_PORT, NULL);
+ return err;
+
+}
+//******************************End of firmware update surpport*******************************
+/////////////////////////////// UPDATE STEP 4 END /////////////////////////////////////////////////////////////////
+
+//å¯ç¨äºè¯¥é©±å¨ç?设å¤åâ设å¤ID å表
+//only one client
+static const struct i2c_device_id goodix_ts_id[] = {
+ { GOODIX_I2C_NAME, 0 },
+ { }
+};
+
+//设å¤é©±å¨ç»æä½?
+static struct i2c_driver goodix_ts_driver = {
+ .probe = goodix_ts_probe,
+ .remove = goodix_ts_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+ .suspend = goodix_ts_suspend,
+ .resume = goodix_ts_resume,
+#endif
+ .id_table = goodix_ts_id,
+ .driver = {
+ .name = GOODIX_I2C_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/*******************************************************
+åè½ï¼? 驱å¨å è½½å½æ°
+returnï¼? æ§è¡ç»æç ï¼0表示æ£å¸¸æ§è¡
+********************************************************/
+static int __devinit goodix_ts_init(void)
+{
+ int ret;
+
+ goodix_wq = create_workqueue("goodix_wq"); //create a work queue and worker thread
+ if (!goodix_wq) {
+ printk(KERN_ALERT "creat workqueue faiked\n");
+ return -ENOMEM;
+
+ }
+ ret=i2c_add_driver(&goodix_ts_driver);
+ return ret;
+}
+
+/*******************************************************
+åè½ï¼? 驱å¨å¸è½½å½æ°
+åæ°ï¼? clientï¼è®¾å¤ç»æä½
+********************************************************/
+static void __exit goodix_ts_exit(void)
+{
+ printk(KERN_ALERT "Touchscreen driver of guitar exited.\n");
+ i2c_del_driver(&goodix_ts_driver);
+ if (goodix_wq)
+ destroy_workqueue(goodix_wq); //release our work queue
+}
+
+late_initcall_sync(goodix_ts_init); //æååå§å驱å¨felix
+module_exit(goodix_ts_exit);
+
+MODULE_DESCRIPTION("Goodix Touchscreen Driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/input/touchscreen/gt811_ts.h b/drivers/input/touchscreen/gt811_ts.h
new file mode 100755
index 000000000000..7eb59a865248
--- /dev/null
+++ b/drivers/input/touchscreen/gt811_ts.h
@@ -0,0 +1,277 @@
+/* drivers/input/touchscreen/gt811.h
+ *
+ * Copyright (C) 2010 - 2011 Goodix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ *Any problem,please contact andrew@goodix.com,+86 755-33338828
+ *
+ */
+
+#ifndef _LINUX_GT811_H
+#define _LINUX_GT811_H
+
+#include <linux/earlysuspend.h>
+#include <linux/hrtimer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+
+//*************************TouchScreen Work Part*****************************
+#define GOODIX_I2C_NAME "gt811_ts"
+#define GT801_PLUS
+#define GT801_NUVOTON
+#define GUITAR_UPDATE_STATE 0x02
+
+//define resolution of the touchscreen
+#define TOUCH_MAX_HEIGHT 800
+#define TOUCH_MAX_WIDTH 480
+//#define STOP_IRQ_TYPE // if define then no stop irq in irq_handle kuuga add 1202S
+#define REFRESH 0 //0~0x64 Scan rate = 10000/(100+REFRESH)//define resolution of the LCD
+
+#define SHUTDOWN_PORT RK2928_PIN3_PC3
+#define INT_PORT RK2928_PIN3_PC7
+
+
+#ifdef INT_PORT
+ #define TS_INT gpio_to_irq(INT_PORT) //Interrupt Number,EINT18(119)
+// #define INT_CFG S3C_GPIO_SFN(3) //IO configer as EINT
+#else
+ #define TS_INT 0
+#endif
+
+/////////////////////////////// UPDATE STEP 5 START /////////////////////////////////////////////////////////////////
+#define TPD_CHIP_VERSION_C_FIRMWARE_BASE 0x5A
+#define TPD_CHIP_VERSION_D1_FIRMWARE_BASE 0x7A
+#define TPD_CHIP_VERSION_E_FIRMWARE_BASE 0x9A
+#define TPD_CHIP_VERSION_D2_FIRMWARE_BASE 0xBA
+
+
+/////////////////////////////// UPDATE STEP 5 END /////////////////////////////////////////////////////////////////
+
+#define FLAG_UP 0
+#define FLAG_DOWN 1
+//set GT801 PLUS trigger mode,Ö»ÄÜÉèÖÃ0»ò1
+//#define INT_TRIGGER 1 // 1=rising 0=falling
+#define POLL_TIME 10 //actual query spacing interval:POLL_TIME+6
+
+#define GOODIX_MULTI_TOUCH
+#ifdef GOODIX_MULTI_TOUCH
+ #define MAX_FINGER_NUM 5
+#else
+ #define MAX_FINGER_NUM 1
+#endif
+
+#if defined(INT_PORT)
+ #if MAX_FINGER_NUM <= 3
+ #define READ_BYTES_NUM 2+2+MAX_FINGER_NUM*5
+ #elif MAX_FINGER_NUM == 4
+ #define READ_BYTES_NUM 2+28
+ #elif MAX_FINGER_NUM == 5
+ #define READ_BYTES_NUM 2+34
+ #endif
+#else
+ #define READ_BYTES_NUM 2+34
+#endif
+
+#define swap(x, y) do { typeof(x) z = x; x = y; y = z; } while (0)
+
+#define READ_TOUCH_ADDR_H 0x07
+#define READ_TOUCH_ADDR_L 0x21 //GT811 0x721
+#define READ_KEY_ADDR_H 0x07
+#define READ_KEY_ADDR_L 0x21
+#define READ_COOR_ADDR_H 0x07
+#define READ_COOR_ADDR_L 0x22
+#define READ_ID_ADDR_H 0x00
+#define READ_ID_ADDR_L 0xff
+//****************************Éý¼¶Ä£¿é²ÎÊý******************************************
+
+//******************************************************************************
+struct gt811_ts_data {
+ uint16_t addr;
+ uint8_t bad_data;
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ int use_reset; //use RESET flag
+ int use_irq; //use EINT flag
+ int read_mode; //read moudle mode,20110221 by andrew
+ struct hrtimer timer;
+ struct work_struct work;
+ char phys[32];
+ int retry;
+ int irq;
+ spinlock_t irq_lock; //add by kuuga
+ int irq_is_disable; /* 0: irq enable */ //add by kuuga
+ uint16_t abs_x_max;
+ uint16_t abs_y_max;
+ uint8_t max_touch_num;
+ uint8_t int_trigger_type;
+ uint8_t btn_state; // key states
+/////////////////////////////// UPDATE STEP 6 START /////////////////////////////////////////////////////////////////
+ unsigned int version;
+/////////////////////////////// UPDATE STEP 6 END /////////////////////////////////////////////////////////////////
+
+ struct early_suspend early_suspend;
+ int (*power)(struct gt811_ts_data * ts, int on);
+};
+
+//*****************************End of Part I *********************************
+
+//*************************Touchkey Surpport Part*****************************
+/*#define HAVE_TOUCH_KEY
+//#define READ_KEY_VALUE
+//#define READ_KEY_COOR
+
+#ifdef HAVE_TOUCH_KEY
+ const uint16_t toucher_key_array[]={
+ KEY_MENU, //MENU
+ KEY_HOME,
+ KEY_BACK,
+ KEY_SEARCH
+ };
+ #define MAX_KEY_NUM (sizeof(toucher_key_array)/sizeof(toucher_key_array[0]))
+#endif
+*/
+//#define COOR_TO_KEY
+ #ifdef COOR_TO_KEY
+
+ #define KEY_X 40
+ #define KEY_Y 20
+ #if 0
+ #define AREA_X 0
+ #else
+ #define AREA_Y 800
+ #endif
+
+ enum {x, y};
+ s32 key_center[MAX_KEY_NUM][2] = {
+
+ {48,840},{124,840},{208,840},{282,840}
+
+ };
+
+ #endif
+
+//*****************************End of Part II*********************************
+
+/////////////////////////////// UPDATE STEP 7 START /////////////////////////////////////////////////////////////////
+//*************************Firmware Update part*******************************
+//#define AUTO_UPDATE_GT811
+
+#define CONFIG_TOUCHSCREEN_GOODIX_IAP
+#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP
+static int goodix_update_write(struct file *filp, const char __user *buff, unsigned long len, void *data);
+static int goodix_update_read( char *page, char **start, off_t off, int count, int *eof, void *data );
+
+#define PACK_SIZE 64 //update file package size
+//#define MAX_TIMEOUT 30000 //update time out conut
+//#define MAX_I2C_RETRIES 10 //i2c retry times
+
+//write cmd
+#define APK_UPDATE_TP 1
+#define APK_READ_FUN 10
+#define APK_WRITE_CFG 11
+
+//fun cmd
+//#define CMD_DISABLE_TP 0
+//#define CMD_ENABLE_TP 1
+#define CMD_READ_VER 2
+#define CMD_READ_RAW 3
+#define CMD_READ_DIF 4
+#define CMD_READ_CFG 5
+#define CMD_READ_CHIP_TYPE 6
+//#define CMD_SYS_REBOOT 101
+
+//read mode
+#define MODE_RD_VER 1
+#define MODE_RD_RAW 2
+#define MODE_RD_DIF 3
+#define MODE_RD_CFG 4
+#define MODE_RD_CHIP_TYPE 5
+
+#if 0
+struct tpd_firmware_info_t
+{
+ int magic_number_1;
+ int magic_number_2;
+ unsigned short version;
+ unsigned short length;
+ unsigned short checksum;
+ unsigned char data;
+};
+#else
+#pragma pack(1)
+struct tpd_firmware_info_t
+{
+ unsigned char chip_type;
+ unsigned short version;
+ unsigned char rom_version;
+ unsigned char reserved[3];
+ unsigned short start_addr;
+ unsigned short length;
+ unsigned char checksum[3];
+ unsigned char mandatory_flag[6];
+ unsigned char data;
+};
+#pragma pack()
+#endif
+
+#define NVRAM_LEN 0x0FF0 // nvram total space
+#define NVRAM_BOOT_SECTOR_LEN 0x0100 // boot sector
+#define NVRAM_UPDATE_START_ADDR 0x4100
+
+#define BIT_NVRAM_STROE 0
+#define BIT_NVRAM_RECALL 1
+#define BIT_NVRAM_LOCK 2
+#define REG_NVRCS_H 0X12
+#define REG_NVRCS_L 0X01
+#define GT811_SET_INT_PIN( level ) gpio_direction_output(INT_PORT, level) //null macro now
+#endif
+//*****************************End of Part III********************************
+/////////////////////////////// UPDATE STEP 7 END /////////////////////////////////////////////////////////////////
+
+struct gt811_platform_data {
+ uint32_t version; /* Use this entry for panels with */
+ u16 model; /* 801. */
+ bool swap_xy; /* swap x and y axes */
+ u16 x_min, x_max;
+ u16 y_min, y_max;
+ bool x_reverse, y_reverse;
+ int (*get_pendown_state)(void);
+ int (*init_platform_hw)(void);
+ int (*platform_sleep)(void);
+ int (*platform_wakeup)(void);
+ void (*exit_platform_hw)(void);
+ int gpio_reset;
+ bool gpio_reset_active_low;
+
+
+ //reservation
+};
+
+#define RAW_DATA_READY 1
+#define RAW_DATA_NON_ACTIVE 0xffffffff
+#define RAW_DATA_ACTIVE 0
+
+
+enum CHIP_TYPE
+{
+ GT800 = 1,
+ GT800PLUS,
+ GT800PLUS3,
+ GT816,
+ GT811,
+ GT8105,
+ GT8110,
+ GT818PLUS
+};
+
+
+#endif /* _LINUX_GOODIX_TOUCH_H */
diff --git a/sound/soc/codecs/rk2928_codec.c b/sound/soc/codecs/rk2928_codec.c
index 8db61f6e7362..85a958cea143 100755
--- a/sound/soc/codecs/rk2928_codec.c
+++ b/sound/soc/codecs/rk2928_codec.c
@@ -61,7 +61,7 @@ static const struct snd_soc_dapm_widget rk2928_dapm_widgets[] = {
// SND_SOC_DAPM_OUT_DRV("DACR Drv", CODEC_REG_DAC_MUTE, 0, 1, NULL, 0),
SND_SOC_DAPM_OUTPUT("SPKL"),
SND_SOC_DAPM_OUTPUT("SPKR"),
- #ifndef CONFIG_MACH_RK2928_A720
+ #ifndef CONFIG_MACH_RK2926_SDK
SND_SOC_DAPM_ADC("ADCL", "HIFI Capture", CODEC_REG_POWER, 3, 1),
SND_SOC_DAPM_INPUT("MICL"),
#endif
@@ -74,7 +74,7 @@ static const struct snd_soc_dapm_route rk2928_audio_map[] = {
{"SPKR", "DACR Amp", "DACR"},
// {"SPKL", NULL, "DACL Drv"},
// {"SPKR", NULL, "DACR Drv"},
- #ifndef CONFIG_MACH_RK2928_A720
+ #ifndef CONFIG_MACH_RK2926_SDK
{"ADCL", NULL, "MICL"},
#endif
{"ADCR", NULL, "MICR"},