From: Jeff Garzik Date: Sat, 12 Nov 2005 14:50:49 +0000 (-0500) Subject: [libata sata_mv] minor fixes X-Git-Tag: firefly_0821_release~39960^2~15 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=095fec887eaa1c38d17c0c929a6733c744a9fa1f;p=firefly-linux-kernel-4.4.55.git [libata sata_mv] minor fixes - clear SError and EDMA irq cause registers, after re-init'ing the phy - move enums with type suffix 'U' to their own enum --- diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 257c128f4aaa..82d1750e779b 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -72,11 +72,6 @@ enum { MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), - /* Our DMA boundary is determined by an ePRD being unable to handle - * anything larger than 64KB - */ - MV_DMA_BOUNDARY = 0xffffU, - MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, @@ -192,7 +187,6 @@ enum { EDMA_REQ_Q_BASE_HI_OFS = 0x10, EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ - EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, EDMA_REQ_Q_OUT_PTR_OFS = 0x18, EDMA_REQ_Q_PTR_SHIFT = 5, @@ -200,7 +194,6 @@ enum { EDMA_RSP_Q_BASE_HI_OFS = 0x1c, EDMA_RSP_Q_IN_PTR_OFS = 0x20, EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ - EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, EDMA_RSP_Q_PTR_SHIFT = 3, EDMA_CMD_OFS = 0x28, @@ -216,6 +209,17 @@ enum { MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; +enum { + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, + + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, +}; + /* Command ReQuest Block: 32B */ struct mv_crqb { u32 sg_addr; @@ -1215,6 +1219,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, */ static void mv_phy_reset(struct ata_port *ap) { + struct mv_port_priv *pp = ap->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; @@ -1232,7 +1237,7 @@ static void mv_phy_reset(struct ata_port *ap) */ writelfl(0, port_mmio + EDMA_CMD_OFS); - VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); @@ -1247,7 +1252,9 @@ static void mv_phy_reset(struct ata_port *ap) break; } while (time_before(jiffies, timeout)); - VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + mv_scr_write(ap, SCR_ERROR, mv_scr_read(ap, SCR_ERROR)); + + DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); @@ -1271,7 +1278,12 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("Port disabled post-sig: No device present.\n"); ata_port_disable(ap); } - VPRINTK("EXIT\n"); + + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + + printk("EXIT\n"); } /**