From: hhb Date: Mon, 11 Jul 2011 10:08:15 +0000 (+0800) Subject: Revert "rk29:uart->rkserial.c add function printing what received and sent and modify... X-Git-Tag: firefly_0821_release~10136^2~21 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=11a0ac26f8d8d231203b2b444d7a69b4d3fb5f61;p=firefly-linux-kernel-4.4.55.git Revert "rk29:uart->rkserial.c add function printing what received and sent and modify uart2 rts pin operation in suspend and resume function" This reverts commit c846ff59f964fe14df539d389a8b82a66c1df924. --- diff --git a/drivers/serial/rk_serial.c b/drivers/serial/rk_serial.c index 623325c64dfa..bef5b8ffeeb2 100644 --- a/drivers/serial/rk_serial.c +++ b/drivers/serial/rk_serial.c @@ -51,10 +51,6 @@ #include #include -#include -#include - - #define PORT_RK 90 #define UART_USR 0x1F /* UART Status Register */ @@ -94,35 +90,37 @@ #define USE_TIMER 1 // use timer for dma transport #define THRE_MODE 0X00 //0yhh -//define which uart the bluetooth use on which board -#ifdef CONFIG_MACH_RK29_PHONESDK -#define BLUETOOTH_UART 2 -#else -#define BLUETOOTH_UART 2 -#endif - - static struct uart_driver serial_rk_reg; /* * Debugging. */ - -#define DBG_PORT 2 // 0,1,2,3, other numbers is default -#if 0 -#define DBG(msg...) printk(msg); -#define DEBUG_INTR(fmt...) if (!uart_console(&up->port)) DBG(fmt) -#else -#define DBG(...) -#define DEBUG_INTR(fmt...) do { } while (0) -#endif - +#define DBG_PORT 1 #ifdef CONFIG_SERIAL_CORE_CONSOLE #define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) #else #define uart_console(port) (0) #endif +#ifdef DEBUG +extern void printascii(const char *); + +static void dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +#define DEBUG_INTR(fmt...) if (!uart_console(&up->port)) dbg(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif /* added by hhb@rock-chips.com for uart dma transfer */ @@ -305,9 +303,21 @@ static void serial_rk_start_tx(struct uart_port *port) { struct uart_rk_port *up = container_of(port, struct uart_rk_port, port); +/* + * struct circ_buf *xmit = &port->state->xmit; + int size = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); + if(size > 64){ + serial_rk_start_tx_dma(port); + } + else{ + serial_rk_enable_ier_thri(up); + } +*/ + if(0 == serial_rk_start_tx_dma(port)){ serial_rk_enable_ier_thri(up); } + } @@ -711,15 +721,10 @@ static void receive_chars(struct uart_rk_port *up, unsigned int *status) { struct tty_struct *tty = up->port.state->port.tty; - struct uart_port *port = &up->port; unsigned char ch, lsr = *status; int max_count = 256; char flag; - if(DBG_PORT == port->line) { - DBG("RX:"); - } - do { if (likely(lsr & UART_LSR_DR)) ch = serial_in(up, UART_RX); @@ -779,9 +784,7 @@ receive_chars(struct uart_rk_port *up, unsigned int *status) goto ignore_char; uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); - if(DBG_PORT == port->line) { - DBG("0x%x, ", ch); - } + ignore_char: lsr = serial_in(up, UART_LSR); } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); @@ -789,17 +792,11 @@ ignore_char: tty_flip_buffer_push(tty); spin_lock(&up->port.lock); *status = lsr; - - if(DBG_PORT == port->line) { - DBG("\n"); - } - } static void transmit_chars(struct uart_rk_port *up) { struct circ_buf *xmit = &up->port.state->xmit; - struct uart_port *port = &up->port; int count; if (up->port.x_char) { @@ -817,18 +814,11 @@ static void transmit_chars(struct uart_rk_port *up) return; } - if(DBG_PORT == port->line) { - DBG("TX:"); - } - count = up->tx_loadsz; do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); up->port.icount.tx++; - if(DBG_PORT == port->line) { - DBG("0x%x, ", xmit->buf[xmit->tail]); - } if (uart_circ_empty(xmit)) break; } while (--count > 0); @@ -836,10 +826,6 @@ static void transmit_chars(struct uart_rk_port *up) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&up->port); - if(DBG_PORT == port->line) { - DBG("\n"); - } - DEBUG_INTR("THRE..."); if (uart_circ_empty(xmit)) @@ -1244,32 +1230,43 @@ serial_rk_set_termios(struct uart_port *port, struct ktermios *termios, struct uart_rk_port *up = container_of(port, struct uart_rk_port, port); unsigned char cval, fcr = 0; - unsigned long flags; + unsigned long flags, bits; unsigned int baud, quot; dev_dbg(port->dev, "+%s\n", __func__); + //start bit + bits += 1; switch (termios->c_cflag & CSIZE) { case CS5: cval = UART_LCR_WLEN5; + bits += 5; break; case CS6: cval = UART_LCR_WLEN6; + bits += 6; break; case CS7: cval = UART_LCR_WLEN7; + bits += 7; break; default: case CS8: cval = UART_LCR_WLEN8; + bits += 8; break; } if (termios->c_cflag & CSTOPB){ cval |= UART_LCR_STOP; + bits += 2; + } + else{ + bits += 1; } if (termios->c_cflag & PARENB){ cval |= UART_LCR_PARITY; + bits += 1; } if (!(termios->c_cflag & PARODD)){ cval |= UART_LCR_EPAR; @@ -1288,6 +1285,10 @@ serial_rk_set_termios(struct uart_port *port, struct ktermios *termios, quot = uart_get_divisor(port, baud); + + dev_info(up->port.dev, "*****baud:%d*******\n", baud); + dev_info(up->port.dev, "*****quot:%d*******\n", quot); + if (baud < 2400){ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; } @@ -1295,6 +1296,19 @@ serial_rk_set_termios(struct uart_port *port, struct ktermios *termios, //added by hhb@rock-chips.com if(up->prk29_uart_dma_t->use_timer == 1){ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_01; + //set time out value according to the baud rate +/* + up->prk29_uart_dma_t->rx_timeout = bits*1000*1024/baud + 1; + + if(up->prk29_uart_dma_t->rx_timeout < 10){ + up->prk29_uart_dma_t->rx_timeout = 10; + } + if(up->prk29_uart_dma_t->rx_timeout > 25){ + up->prk29_uart_dma_t->rx_timeout = 25; + } + printk("%s:time:%d, bits:%d, baud:%d\n", __func__, up->prk29_uart_dma_t->rx_timeout, bits, baud); + up->prk29_uart_dma_t->rx_timeout = 7; +*/ } else{ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | UART_FCR_T_TRIG_01; @@ -1312,8 +1326,10 @@ serial_rk_set_termios(struct uart_port *port, struct ktermios *termios, up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS){ up->mcr |= UART_MCR_AFE; + //dev_info(up->port.dev, "*****UART_MCR_AFE*******\n"); } + /* * Ok, we're now changing the port state. Do it with * interrupts disabled. @@ -1750,50 +1766,17 @@ static int serial_rk_suspend(struct platform_device *dev, pm_message_t state) { struct uart_rk_port *up = platform_get_drvdata(dev); - if (up){ + if (up) uart_suspend_port(&serial_rk_reg, &up->port); - if(up->port.line == BLUETOOTH_UART){ - rk29_mux_api_set(GPIO2A7_UART2RTSN_NAME, GPIO2L_GPIO2A7); - gpio_request(RK29_PIN2_PA7, "uart_rts"); - gpio_direction_output(RK29_PIN2_PA7, 0); - gpio_set_value(RK29_PIN2_PA7, GPIO_HIGH); - }else{ - serial_out(up, UART_MCR, 0); - } - } return 0; } - -static struct timer_list uart2_tl; -static bool timer_init = false; -static void timer_resume_uart2(unsigned long arg) -{ - DBG("%s---\n", __FUNCTION__); - gpio_set_value(RK29_PIN2_PA7, GPIO_LOW); - rk29_mux_api_set(GPIO2A7_UART2RTSN_NAME, GPIO2L_UART2_RTS_N); -} - static int serial_rk_resume(struct platform_device *dev) { struct uart_rk_port *up = platform_get_drvdata(dev); - if (up){ + if (up) uart_resume_port(&serial_rk_reg, &up->port); - - if(up->port.line == BLUETOOTH_UART){ - if(!timer_init){ - init_timer(&uart2_tl); - uart2_tl.expires = jiffies + msecs_to_jiffies(30); - uart2_tl.function = timer_resume_uart2; - add_timer(&uart2_tl); - timer_init = true; - } - else{ - mod_timer(&uart2_tl,jiffies + msecs_to_jiffies(30)); - } - } - } return 0; }