From: H Hartley Sweeten Date: Tue, 26 Nov 2013 17:21:18 +0000 (-0700) Subject: staging: comedi: cb_pcidas64: remove DEBUG_PRINT X-Git-Tag: firefly_0821_release~176^2~4489^2~714 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=220edb916680102048fdc6a2eda980240bda9cac;p=firefly-linux-kernel-4.4.55.git staging: comedi: cb_pcidas64: remove DEBUG_PRINT The DEBUG_PRINT macro in this driver is used to output development debug tracing messages. These messages are just added noise. Remove them. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index ff5206536be3..a0053bbb2ede 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -94,15 +94,6 @@ TODO: #include "plx9080.h" #include "comedi_fc.h" -#undef PCIDAS64_DEBUG /* disable debugging code */ -/* #define PCIDAS64_DEBUG enable debugging code */ - -#ifdef PCIDAS64_DEBUG -#define DEBUG_PRINT(format, args...) pr_debug(format, ## args) -#else -#define DEBUG_PRINT(format, args...) no_printk(format, ## args) -#endif - #define TIMER_BASE 25 /* 40MHz master clock */ /* 100kHz 'prescaled' clock for slow acquisition, * maybe I'll support this someday */ @@ -1252,8 +1243,6 @@ static void disable_ai_interrupts(struct comedi_device *dev) writew(devpriv->intr_enable_bits, devpriv->main_iobase + INTR_ENABLE_REG); spin_unlock_irqrestore(&dev->spinlock, flags); - - DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits); } static void enable_ai_interrupts(struct comedi_device *dev, @@ -1277,7 +1266,6 @@ static void enable_ai_interrupts(struct comedi_device *dev, devpriv->intr_enable_bits |= bits; writew(devpriv->intr_enable_bits, devpriv->main_iobase + INTR_ENABLE_REG); - DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits); spin_unlock_irqrestore(&dev->spinlock, flags); } @@ -1292,38 +1280,6 @@ static void init_plx9080(struct comedi_device *dev) devpriv->plx_control_bits = readl(devpriv->plx9080_iobase + PLX_CONTROL_REG); - /* plx9080 dump */ - DEBUG_PRINT(" plx interrupt status 0x%x\n", - readl(plx_iobase + PLX_INTRCS_REG)); - DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG)); - DEBUG_PRINT(" plx control reg 0x%x\n", devpriv->plx_control_bits); - DEBUG_PRINT(" plx mode/arbitration reg 0x%x\n", - readl(plx_iobase + PLX_MARB_REG)); - DEBUG_PRINT(" plx region0 reg 0x%x\n", - readl(plx_iobase + PLX_REGION0_REG)); - DEBUG_PRINT(" plx region1 reg 0x%x\n", - readl(plx_iobase + PLX_REGION1_REG)); - - DEBUG_PRINT(" plx revision 0x%x\n", - readl(plx_iobase + PLX_REVISION_REG)); - DEBUG_PRINT(" plx dma channel 0 mode 0x%x\n", - readl(plx_iobase + PLX_DMA0_MODE_REG)); - DEBUG_PRINT(" plx dma channel 1 mode 0x%x\n", - readl(plx_iobase + PLX_DMA1_MODE_REG)); - DEBUG_PRINT(" plx dma channel 0 pci address 0x%x\n", - readl(plx_iobase + PLX_DMA0_PCI_ADDRESS_REG)); - DEBUG_PRINT(" plx dma channel 0 local address 0x%x\n", - readl(plx_iobase + PLX_DMA0_LOCAL_ADDRESS_REG)); - DEBUG_PRINT(" plx dma channel 0 transfer size 0x%x\n", - readl(plx_iobase + PLX_DMA0_TRANSFER_SIZE_REG)); - DEBUG_PRINT(" plx dma channel 0 descriptor 0x%x\n", - readl(plx_iobase + PLX_DMA0_DESCRIPTOR_REG)); - DEBUG_PRINT(" plx dma channel 0 command status 0x%x\n", - readb(plx_iobase + PLX_DMA0_CS_REG)); - DEBUG_PRINT(" plx dma channel 0 threshold 0x%x\n", - readl(plx_iobase + PLX_DMA0_THRESHOLD_REG)); - DEBUG_PRINT(" plx bigend 0x%x\n", readl(plx_iobase + PLX_BIGEND_REG)); - #ifdef __BIG_ENDIAN bits = BIGEND_DMA0 | BIGEND_DMA1; #else @@ -1417,9 +1373,6 @@ static int set_ai_fifo_segment_length(struct comedi_device *dev, devpriv->ai_fifo_segment_length = num_increments * increment_size; - DEBUG_PRINT("set hardware fifo segment length to %i\n", - devpriv->ai_fifo_segment_length); - return devpriv->ai_fifo_segment_length; } @@ -1441,8 +1394,6 @@ static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples) num_samples = retval * fifo->num_segments * fifo->sample_packing_ratio; - DEBUG_PRINT("set hardware fifo size to %i\n", num_samples); - return num_samples; } @@ -1538,8 +1489,6 @@ static int alloc_and_init_dma_members(struct comedi_device *dev) if (devpriv->ai_dma_desc == NULL) return -ENOMEM; - DEBUG_PRINT("ai dma descriptors start at bus addr 0x%llx\n", - (unsigned long long)devpriv->ai_dma_desc_bus_addr); if (ao_cmd_is_supported(thisboard)) { devpriv->ao_dma_desc = pci_alloc_consistent(pcidev, @@ -1548,9 +1497,6 @@ static int alloc_and_init_dma_members(struct comedi_device *dev) &devpriv->ao_dma_desc_bus_addr); if (devpriv->ao_dma_desc == NULL) return -ENOMEM; - - DEBUG_PRINT("ao dma descriptors start at bus addr 0x%llx\n", - (unsigned long long)devpriv->ao_dma_desc_bus_addr); } /* initialize dma descriptors */ for (i = 0; i < ai_dma_ring_count(thisboard); i++) { @@ -1650,8 +1596,6 @@ static void i2c_write_byte(struct comedi_device *dev, uint8_t byte) uint8_t bit; unsigned int num_bits = 8; - DEBUG_PRINT("writing to i2c byte 0x%x\n", byte); - for (bit = 1 << (num_bits - 1); bit; bit >>= 1) { i2c_set_scl(dev, 0); if ((byte & bit)) @@ -1738,7 +1682,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, unsigned long flags; static const int timeout = 100; - DEBUG_PRINT("chanspec 0x%x\n", insn->chanspec); channel = CR_CHAN(insn->chanspec); range = CR_RANGE(insn->chanspec); aref = CR_AREF(insn->chanspec); @@ -1766,7 +1709,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, if (insn->chanspec & CR_ALT_SOURCE) { unsigned int cal_en_bit; - DEBUG_PRINT("reading calibration source\n"); if (thisboard->layout == LAYOUT_60XX) cal_en_bit = CAL_EN_60XX_BIT; else @@ -1800,7 +1742,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK; if (insn->chanspec & CR_ALT_SOURCE) { - DEBUG_PRINT("reading calibration source\n"); devpriv->i2c_cal_range_bits |= adc_src_4020_bits(devpriv->calibration_source); } else { /* select BNC inputs */ @@ -1839,7 +1780,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, /* wait for data */ for (i = 0; i < timeout; i++) { bits = readw(devpriv->main_iobase + HW_STATUS_REG); - DEBUG_PRINT(" pipe bits 0x%x\n", pipe_full_bits(bits)); if (thisboard->layout == LAYOUT_4020) { if (readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG)) @@ -1850,7 +1790,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, } udelay(1); } - DEBUG_PRINT(" looped %i times waiting for data\n", i); if (i == timeout) { comedi_error(dev, " analog input read insn timed out"); dev_info(dev->class_dev, "status 0x%x\n", bits); @@ -1884,7 +1823,6 @@ static int ai_config_calibration_source(struct comedi_device *dev, return -EINVAL; } - DEBUG_PRINT("setting calibration source to %i\n", source); devpriv->calibration_source = source; return 2; @@ -2368,7 +2306,6 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd) /* load lower 16 bits of convert interval */ writew(convert_counter & 0xffff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG); - DEBUG_PRINT("convert counter 0x%x\n", convert_counter); /* load upper 8 bits of convert interval */ writew((convert_counter >> 16) & 0xff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); @@ -2378,7 +2315,6 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd) /* load upper 8 bits of scan delay */ writew((scan_counter >> 16) & 0xff, devpriv->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG); - DEBUG_PRINT("scan counter 0x%x\n", scan_counter); } static int use_internal_queue_6xxx(const struct comedi_cmd *cmd) @@ -2469,9 +2405,6 @@ static int setup_channel_queue(struct comedi_device *dev, writew(bits, devpriv->main_iobase + ADC_QUEUE_FIFO_REG); - DEBUG_PRINT( - "wrote 0x%x to external channel queue\n", - bits); } /* doing a queue clear is not specified in board docs, * but required for reliable operation */ @@ -2593,7 +2526,6 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) } writew(devpriv->adc_control1_bits, devpriv->main_iobase + ADC_CONTROL1_REG); - DEBUG_PRINT("control1 bits 0x%x\n", devpriv->adc_control1_bits); spin_unlock_irqrestore(&dev->spinlock, flags); /* clear adc buffer */ @@ -2645,17 +2577,14 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (use_hw_sample_counter(cmd)) bits |= ADC_SAMPLE_COUNTER_EN_BIT; writew(bits, devpriv->main_iobase + ADC_CONTROL0_REG); - DEBUG_PRINT("control0 bits 0x%x\n", bits); devpriv->ai_cmd_running = 1; spin_unlock_irqrestore(&dev->spinlock, flags); /* start acquisition */ - if (cmd->start_src == TRIG_NOW) { + if (cmd->start_src == TRIG_NOW) writew(0, devpriv->main_iobase + ADC_START_REG); - DEBUG_PRINT("soft trig\n"); - } return 0; } @@ -2690,10 +2619,6 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev) read_segment = adc_upper_read_ptr_code(prepost_bits); write_segment = adc_upper_write_ptr_code(prepost_bits); - DEBUG_PRINT(" rd seg %i, wrt seg %i, rd idx %i, wrt idx %i\n", - read_segment, write_segment, read_index, - write_index); - if (read_segment != write_segment) num_samples = devpriv->ai_fifo_segment_length - read_index; @@ -2715,8 +2640,6 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev) break; } - DEBUG_PRINT(" read %i samples from fifo\n", num_samples); - for (i = 0; i < num_samples; i++) { cfc_write_to_buffer(s, readw(devpriv->main_iobase + @@ -2812,11 +2735,6 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel) num_samples * sizeof(uint16_t)); devpriv->ai_dma_index = (devpriv->ai_dma_index + 1) % ai_dma_ring_count(thisboard); - - DEBUG_PRINT("next buffer addr 0x%lx\n", - (unsigned long)devpriv-> - ai_buffer_bus_addr[devpriv->ai_dma_index]); - DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr); } /* XXX check for dma ring buffer overrun * (use end-of-chain bit to mark last unused buffer) */ @@ -2845,24 +2763,17 @@ static void handle_ai_interrupt(struct comedi_device *dev, if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_iobase + PLX_DMA1_CS_REG); - DEBUG_PRINT("dma1 status 0x%x\n", dma1_status); if (dma1_status & PLX_DMA_EN_BIT) drain_dma_buffers(dev, 1); - - DEBUG_PRINT(" cleared dma ch1 interrupt\n"); } spin_unlock_irqrestore(&dev->spinlock, flags); - if (status & ADC_DONE_BIT) - DEBUG_PRINT("adc done interrupt\n"); - /* drain fifo with pio */ if ((status & ADC_DONE_BIT) || ((cmd->flags & TRIG_WAKE_EOS) && (status & ADC_INTR_PENDING_BIT) && (thisboard->layout != LAYOUT_4020))) { - DEBUG_PRINT("pio fifo drain\n"); spin_lock_irqsave(&dev->spinlock, flags); if (devpriv->ai_cmd_running) { spin_unlock_irqrestore(&dev->spinlock, flags); @@ -2947,7 +2858,6 @@ static void restart_ao_dma(struct comedi_device *dev) dma_desc_bits = readl(devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG); dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT; - DEBUG_PRINT("restarting ao dma, descriptor reg 0x%x\n", dma_desc_bits); load_first_dma_descriptor(dev, 0, dma_desc_bits); dma_start_sync(dev, 0); @@ -2963,10 +2873,6 @@ static unsigned int load_ao_dma_buffer(struct comedi_device *dev, buffer_index = devpriv->ao_dma_index; prev_buffer_index = prev_ao_dma_index(dev); - DEBUG_PRINT("attempting to load ao buffer %i (0x%llx)\n", buffer_index, - (unsigned long long)devpriv->ao_buffer_bus_addr[ - buffer_index]); - num_bytes = comedi_buf_read_n_available(dev->write_subdev->async); if (num_bytes > DMA_BUFFER_SIZE) num_bytes = DMA_BUFFER_SIZE; @@ -2977,8 +2883,6 @@ static unsigned int load_ao_dma_buffer(struct comedi_device *dev, if (num_bytes == 0) return 0; - DEBUG_PRINT("loading %i bytes\n", num_bytes); - num_bytes = cfc_read_array_from_buffer(dev->write_subdev, devpriv-> ao_buffer[buffer_index], @@ -3052,14 +2956,12 @@ static void handle_ao_interrupt(struct comedi_device *dev, writeb(PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_iobase + PLX_DMA0_CS_REG); spin_unlock_irqrestore(&dev->spinlock, flags); - DEBUG_PRINT("dma0 status 0x%x\n", dma0_status); if (dma0_status & PLX_DMA_EN_BIT) { load_ao_dma(dev, cmd); /* try to recover from dma end-of-chain event */ if (ao_dma_needs_restart(dev, dma0_status)) restart_ao_dma(dev); } - DEBUG_PRINT(" cleared dma ch0 interrupt\n"); } else { spin_unlock_irqrestore(&dev->spinlock, flags); } @@ -3068,12 +2970,6 @@ static void handle_ao_interrupt(struct comedi_device *dev, async->events |= COMEDI_CB_EOA; if (ao_stopped_by_error(dev, cmd)) async->events |= COMEDI_CB_ERROR; - DEBUG_PRINT("plx dma0 desc reg 0x%x\n", - readl(devpriv->plx9080_iobase + - PLX_DMA0_DESCRIPTOR_REG)); - DEBUG_PRINT("plx dma0 address reg 0x%x\n", - readl(devpriv->plx9080_iobase + - PLX_DMA0_PCI_ADDRESS_REG)); } cfc_handle_events(dev, s); } @@ -3089,15 +2985,12 @@ static irqreturn_t handle_interrupt(int irq, void *d) plx_status = readl(devpriv->plx9080_iobase + PLX_INTRCS_REG); status = readw(devpriv->main_iobase + HW_STATUS_REG); - DEBUG_PRINT("hw status 0x%x, plx status 0x%x\n", status, plx_status); - /* an interrupt before all the postconfig stuff gets done could * cause a NULL dereference if we continue through the * interrupt handler */ - if (!dev->attached) { - DEBUG_PRINT("premature interrupt, ignoring\n"); + if (!dev->attached) return IRQ_HANDLED; - } + handle_ai_interrupt(dev, status, plx_status); handle_ao_interrupt(dev, status, plx_status); @@ -3105,11 +2998,8 @@ static irqreturn_t handle_interrupt(int irq, void *d) if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */ plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG); writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG); - DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits); } - DEBUG_PRINT("exiting handler\n"); - return IRQ_HANDLED; } @@ -3130,7 +3020,6 @@ static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s) abort_dma(dev, 1); - DEBUG_PRINT("ai canceled\n"); return 0; } @@ -3458,7 +3347,6 @@ static int dio_callback(int dir, int port, int data, unsigned long arg) void __iomem *iobase = (void __iomem *)arg; if (dir) { writeb(data, iobase + port); - DEBUG_PRINT("wrote 0x%x to port %i\n", data, port); return 0; } else { return readb(iobase + port); @@ -4046,11 +3934,6 @@ static int auto_attach(struct comedi_device *dev, return -ENOMEM; } - DEBUG_PRINT(" plx9080 remapped to 0x%p\n", devpriv->plx9080_iobase); - DEBUG_PRINT(" main remapped to 0x%p\n", devpriv->main_iobase); - DEBUG_PRINT(" diocounter remapped to 0x%p\n", - devpriv->dio_counter_iobase); - /* figure out what local addresses are */ local_range = readl(devpriv->plx9080_iobase + PLX_LAS0RNG_REG) & LRNG_MEM_MASK; @@ -4065,9 +3948,6 @@ static int auto_attach(struct comedi_device *dev, devpriv->local1_iobase = ((uint32_t)devpriv->dio_counter_phys_iobase & ~local_range) | local_decode; - DEBUG_PRINT(" local 0 io addr 0x%x\n", devpriv->local0_iobase); - DEBUG_PRINT(" local 1 io addr 0x%x\n", devpriv->local1_iobase); - retval = alloc_and_init_dma_members(dev); if (retval < 0) return retval;