From: Gabor Juhos Date: Wed, 16 Apr 2014 09:34:41 +0000 (+0200) Subject: watchdog: ath79_wdt: avoid spurious restarts on AR934x X-Git-Tag: firefly_0821_release~176^2~3788^2~19 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=23afeb613ec0e10aecfae7838a14d485db62ac52;p=firefly-linux-kernel-4.4.55.git watchdog: ath79_wdt: avoid spurious restarts on AR934x On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by: Gabor Juhos Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Cc: --- diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c index 399c3fddecf6..0e67d96b3ebd 100644 --- a/drivers/watchdog/ath79_wdt.c +++ b/drivers/watchdog/ath79_wdt.c @@ -20,6 +20,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +#include #include #include #include @@ -90,6 +91,15 @@ static inline void ath79_wdt_keepalive(void) static inline void ath79_wdt_enable(void) { ath79_wdt_keepalive(); + + /* + * Updating the TIMER register requires a few microseconds + * on the AR934x SoCs at least. Use a small delay to ensure + * that the TIMER register is updated within the hardware + * before enabling the watchdog. + */ + udelay(2); + ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_FCR); /* flush write */ ath79_wdt_rr(WDOG_REG_CTRL);