From: Manish chopra <manish.chopra@qlogic.com>
Date: Wed, 30 Jan 2013 12:47:15 +0000 (+0000)
Subject: qlcnic: driver LRO bug fix
X-Git-Tag: firefly_0821_release~3680^2~1092^2~209
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=283c1c687051241e644af57bef7b6532cd65118a;p=firefly-linux-kernel-4.4.55.git

qlcnic: driver LRO bug fix

o ipv4 address was not getting programmed properly because of
  improper byte order conversion

Signed-off-by: Manish chopra <manish.chopra@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 1e81e94b3c6b..65233c846537 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -1399,7 +1399,7 @@ void qlcnic_83xx_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip,
 			       int mode)
 {
 	int err;
-	u32 temp;
+	u32 temp, temp_ip;
 	struct qlcnic_cmd_args cmd;
 
 	qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_IP_ADDR);
@@ -1410,8 +1410,17 @@ void qlcnic_83xx_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip,
 		temp = adapter->recv_ctx->context_id << 16;
 		cmd.req.arg[1] = 2 | temp;
 	}
-	cmd.req.arg[2] = ntohl(ip);
 
+	/*
+	 * Adapter needs IP address in network byte order.
+	 * But hardware mailbox registers go through writel(), hence IP address
+	 * gets swapped on big endian architecture.
+	 * To negate swapping of writel() on big endian architecture
+	 * use swab32(value).
+	 */
+
+	temp_ip = swab32(ntohl(ip));
+	memcpy(&cmd.req.arg[2], &temp_ip, sizeof(u32));
 	err = qlcnic_issue_cmd(adapter, &cmd);
 	if (err != QLCNIC_RCODE_SUCCESS)
 		dev_err(&adapter->netdev->dev,
@@ -1425,13 +1434,16 @@ int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *adapter, int mode)
 	int err;
 	u32 temp, arg1;
 	struct qlcnic_cmd_args cmd;
+	int lro_bit_mask;
+
+	lro_bit_mask = (mode ? (BIT_0 | BIT_1 | BIT_2 | BIT_3) : 0);
 
 	if (adapter->recv_ctx->state == QLCNIC_HOST_CTX_STATE_FREED)
 		return 0;
 
 	qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_CONFIGURE_HW_LRO);
 	temp = adapter->recv_ctx->context_id << 16;
-	arg1 = (mode ? (BIT_0 | BIT_1 | BIT_3) : 0) | temp;
+	arg1 = lro_bit_mask | temp;
 	cmd.req.arg[1] = arg1;
 
 	err = qlcnic_issue_cmd(adapter, &cmd);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 6c6ecfc152b8..4e4ebafac5c9 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -958,8 +958,10 @@ int qlcnic_set_features(struct net_device *netdev, netdev_features_t features)
 	if (qlcnic_config_hw_lro(adapter, hw_lro))
 		return -EIO;
 
-	if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter))
-		return -EIO;
+	if (!hw_lro && qlcnic_82xx_check(adapter)) {
+		if (qlcnic_send_lro_cleanup(adapter))
+			return -EIO;
+	}
 
 	return 0;
 }