From: Jonathan Cameron Date: Fri, 8 Oct 2010 11:14:12 +0000 (+0100) Subject: staging: iio: events update documentation to match new abi. X-Git-Tag: firefly_0821_release~7613^2~3583^2~3^2~255 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=2f3cc667f788d97b6e79ef76b89f995598c036a3;p=firefly-linux-kernel-4.4.55.git staging: iio: events update documentation to match new abi. Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio index 62becc0cdb76..fdb017a1c1a2 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio @@ -1,4 +1,3 @@ - What: /sys/bus/iio/devices/device[n] KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org @@ -22,8 +21,8 @@ What: /sys/bus/iio/devices/device[n]:buffer KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: - Link to /sys/class/iio/device[n]/device[n]:buffer. n indicates the - device with which this buffer buffer is associated. + Link to /sys/class/iio/device[n]/device[n]:buffer. n indicates + the device with which this buffer buffer is associated. What: /sys/.../device[n]/name KernelVersion: 2.6.35 @@ -52,7 +51,7 @@ Description: When the internal sampling clock can only take a small discrete set of values, this file lists those availale. -What: /sys/.../device[n]/in[_name][m]_raw +What: /sys/.../device[n]/in[m][_name]_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -60,8 +59,11 @@ Description: channel m. name is used in special cases where this does not correspond to externally available input (e.g. supply voltage monitoring in which case the file is in_supply_raw). + If the device supports events on this channel then m must be + specified (even on named channels) so as to allow the source + of event codes to be identified. -What: /sys/.../device[n]/in[_name][m]_offset +What: /sys/.../device[n]/in[m][_name]_offset KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -75,7 +77,7 @@ Description: between different instances of the part, typically adjusted by using some hardware supported calibration procedure. -What: /sys/.../device[n]/in[_name][m]_offset_available +What: /sys/.../device[n]/in[m][_name]_offset_available KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -84,45 +86,46 @@ Description: options the same) for individual offsets then m should not be present. -What: /sys/.../device[n]/in[_name][m]_offset_[min|max] +What: /sys/.../device[n]/in[m][_name]_offset_[min|max] KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: - If a more or less continuous range of voltage offsets are supported - then these specify the minimum and maximum. If shared by all - in channels then m is not present. + If a more or less continuous range of voltage offsets are + supported then these specify the minimum and maximum. If shared + by all in channels then m is not present. -What: /sys/.../device[n]/in[_name][m]_calibbias +What: /sys/.../device[n]/in[m][_name]_calibbias KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware applied calibration offset. (assumed to fix production inaccuracies) -What /sys/.../device[n]/in[_name][m]_calibscale +What /sys/.../device[n]/in[m][_name]_calibscale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: - Hardware applied calibration scale factor. (assumed to fix production - inaccuracies) + Hardware applied calibration scale factor. (assumed to fix + production inaccuracies) -What: /sys/.../device[n]/in[_name][m]_scale +What: /sys/.../device[n]/in[m][_name]_scale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If known for a device, scale to be applied to volt[m]_raw post addition of in[_name][m]_offset in order to obtain the measured - voltage in millivolts. If shared across all in channels then m is not present. + voltage in millivolts. If shared across all in channels then + m is not present. What: /sys/.../device[n]/in[m]-in[o]_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled) differential voltage measurement equivalent to - channel m - channel o where these channel numbers apply to the physically - equivalent inputs when non differential readings are separately available. - In differential only parts, then all that is required is a consistent - labelling. + channel m - channel o where these channel numbers apply to the + physically equivalent inputs when non differential readings are + separately available. In differential only parts, then all that + is required is a consistent labelling. What: /sys/.../device[n]/accel[_x|_y|_z][m]_raw KernelVersion: 2.6.35 @@ -131,17 +134,19 @@ Description: Acceleration in direction x, y or z (may be arbitrarily assigned but should match other such assignments on device) channel m (not present if only one accelerometer channel at - this orientation). Has all of the equivalent parameters as per in[m]. - Units after application of scale and offset are m/s^2. + this orientation). Has all of the equivalent parameters as per + in[m]. Units after application of scale and offset are m/s^2. What: /sys/.../device[n]/gyro[_x|_y|_z][m]_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: - Angular velocity about axis x, y or z (may be arbitrarily assigned) - channel m (not present if only one gyroscope at this orientation). + Angular velocity about axis x, y or z (may be arbitrarily + assigned) channel m (not present if only one gyroscope at + this orientation). Data converted by application of offset then scale to - radians per second. Has all the equivalent parameters as per in[m]. + radians per second. Has all the equivalent parameters as + per in[m]. What: /sys/.../device[n]/incli[_x|_y|_z][m]_raw KernelVersion: 2.6.35 @@ -156,10 +161,11 @@ What: /sys/.../device[n]/magn[_x|_y|_z][m]_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: - Magnetic field along axis x, y or z (may be arbitrarily assigned) - channel m (not present if only one magnetometer at this orientation). - Data converted by application of offset then scale to Gauss. - Has all the equivalent modifiers as per in[m]. + Magnetic field along axis x, y or z (may be arbitrarily + assigned) channel m (not present if only one magnetometer + at this orientation). Data converted by application of + offset then scale to Gauss. Has all the equivalent modifiers + as per in[m]. What: /sys/.../device[n]/device[n]:event[m] KernelVersion: 2.6.35 @@ -177,40 +183,114 @@ Description: Taking accel_x0 as an example -What: /sys/.../device[n]:event[m]/accel_x0_thresh[_high|_low]_en -KernelVersion: 2.6.35 +What: /sys/.../device[n]:event[m]/accel_x0_thresh[_rising|_falling]_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Event generated when accel_x0 passes a threshold in the specfied + (_rising|_falling) direction. If the direction is not specified, + then either the device will report an event which ever direction + a single threshold value is called in (e.g. + accel_x0__thresh_value) or + accel_x0__thresh_rising_value and + accel_x0__thresh_falling_value may take different + values, but the device can only enable both thresholds or + neither. + Note the driver will assume the last p events requested are + to be enabled where p is however many it supports (which may + vary depending on the exact set requested. So if you want to be + sure you have set what you think you have, check the contents of + these attributes after everything is configured. Drivers may + have to buffer any parameters so that they are consistent when + a given event type is enabled a future point (and not those for + whatever event was previously enabled). + +What: /sys/.../accel_x0__thresh[_rising|_falling]_value +KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - Event generated when accel_x0 passes a threshold in correction direction - (or stays beyond one). If direction isn't specified, either triggers it. - Note driver will assume last p events requested are enabled where p is - however many it supports. So if you want to be sure you have - set what you think you have, check the contents of these. Drivers - may have to buffer any parameters so that they are consistent when a - given event type is enabled a future point (and not those for whatever - alarm was previously enabled). + Specifies the value of threshold that the device is comparing + against for the events enabled by + accel_x0__thresh[_rising|falling]_en. + If seperate exist for the two directions, but direction is + not specified for this attribute, then a single threshold value + applies to both directions. + The raw or input element of the name indicates whether the + value is in raw device units or in processed units (as _raw + and _input do on sysfs direct channel read attributes). -What: /sys/.../device[n]:event[m]/accel_x0_roc[_high|_low]_en -KernelVersion: 2.6.35 +What: /sys/.../accel_x0_thresh[_rising|_falling]_meanperiod +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Period of time (in seconds) over which the raw channel value + is averaged before being compared with the threshold set in + accel_x0_thresh[_rising|_falling]_meanperiod. If direction is + not specified then this mean period applies to both directions. + +What: /sys/.../accel_x0_thresh[_rising|_falling]_period +KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - Same as above but based on the first differential of the value. + Period of time (in seconds) for which the threshold must be + passed before an event is generated. If direction is not + specified then this period applies to both directions. +What: /sys/.../device[n]:event[m]/accel_x0_mag[_rising|_falling]_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Similar to accel_x0_thresh[_rising|_falling]_en, but here the + magnitude of the channel is compared to the threshold, not its + signed value. -What: /sys/.../device[n]:event[m]/accel_x0[_thresh|_roc][_high|_low]_period -KernelVersion: 2.6.35 +What: /sys/.../accel_x0__mag[_rising|_falling]_value +KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - A period of time (microsecs) for which the condition must be broken - before an interrupt is triggered. Applies to all alarms if type is not - specified. + The value to which the magnitude of the channel is compared. -What: /sys/.../device[n]:event[m]/accel_x0[_thresh|_roc][_high|_low]_value -KernelVersion: 2.6.35 +What: /sys/.../accel_x0_mag[_rising|_falling]_meanperiod +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Period of time (in seconds) over which the value of the channel + is averaged before being compared to the threshold + +What: /sys/.../accel_x0_mag[_rising|_falling]_period +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Period of time (in seconds) for which the condition must be true + before an event occurs. + +What: /sys/.../device[n]:event[m]/accel_x0_roc[_rising|_falling]_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Similar to accel_x0_thresh[_rising|_falling]_en, but here the + first differential is compared with the threshold. + +What: /sys/.../accel_x0__roc[_rising|_falling]_value +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + The value to which the first differential of the channel is + compared. + +What: /sys/.../accel_x0_roc[_rising|_falling]_meanperiod +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Period of time (in seconds) over which the value of the channel + is averaged before being compared to the threshold + +What: /sys/.../accel_x0_roc[_rising|_falling]_period +KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - The actual value of the threshold in raw device units obtained by - reverse application of scale and offfset to the acceleration in m/s^2. + Period of time (in seconds) for which the condition must be true + before an event occurs. What: /sys/.../device[n]/device[n]:buffer:event/dev KernelVersion: 2.6.35 @@ -255,16 +335,16 @@ What: /sys/.../device[n]:buffer/alignment KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: - Minimum data alignment. Scan elements larger than this are aligned - to the nearest power of 2 times this. (may not be true in weird - hardware buffers that pack data well) + Minimum data alignment. Scan elements larger than this are + aligned to the nearest power of 2 times this. (may not be + true in weird hardware buffers that pack data well) What: /sys/.../device[n]/buffer/scan_elements KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: - Directory containing interfaces for elements that will be captured - for a single triggered sample set in the buffer. + Directory containing interfaces for elements that will be + captured for a single triggered sample set in the buffer. What: /sys/.../device[n]/buffer/scan_elements/accel_x0_en KernelVersion: 2.6.37