From: Xenia Ragiadakou Date: Thu, 10 Oct 2013 07:43:57 +0000 (+0300) Subject: staging: rtl8192u: fix comments in r819xU_HTType.h X-Git-Tag: firefly_0821_release~176^2~5057^2~321 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=3652701608e0f47d1dd9eba80c4fc1912902a781;p=firefly-linux-kernel-4.4.55.git staging: rtl8192u: fix comments in r819xU_HTType.h This patch fixes comments in r819xU_HTType.h by: * replacing // commments with /* */ comments * removing author and date information from comments * removing unnecessary comments This is done to improve code readability. Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h index 2b95f1e53448..60e8e1b9ebd8 100644 --- a/drivers/staging/rtl8192u/r819xU_HTType.h +++ b/drivers/staging/rtl8192u/r819xU_HTType.h @@ -2,31 +2,25 @@ #define _R819XU_HTTYPE_H_ -//------------------------------------------------------------ -// The HT Capability element is present in beacons, association request, -// reassociation request and probe response frames -//------------------------------------------------------------ - -// -// Operation mode value -// +/*---------------------------------------------------------------------- + * The HT Capability element is present in beacons, association request, + * reassociation request and probe response frames + *----------------------------------------------------------------------*/ + +/* Operation mode value */ #define HT_OPMODE_NO_PROTECT 0 #define HT_OPMODE_OPTIONAL 1 #define HT_OPMODE_40MHZ_PROTECT 2 #define HT_OPMODE_MIXED 3 -// -// MIMO Power Save Settings -// +/* MIMO Power Save Settings */ #define MIMO_PS_STATIC 0 #define MIMO_PS_DYNAMIC 1 #define MIMO_PS_NOLIMIT 3 -// -// There should be 128 bits to cover all of the MCS rates. However, since -// 8190 does not support too much rates, one integer is quite enough. -// +/* There should be 128 bits to cover all of the MCS rates. However, since + * 8190 does not support too much rates, one integer is quite enough. */ #define sHTCLng 4 @@ -53,21 +47,17 @@ typedef enum _HT_MCS_RATE { HT_MCS13 = 0x00002000, HT_MCS14 = 0x00004000, HT_MCS15 = 0x00008000, - // Do not define MCS32 here although 8190 support MCS32 + /* Do not define MCS32 here although 8190 support MCS32 */ } HT_MCS_RATE,*PHT_MCS_RATE; -// -// Represent Channel Width in HT Capabilities -// +/* Represent Channel Width in HT Capabilities */ typedef enum _HT_CHANNEL_WIDTH { HT_CHANNEL_WIDTH_20 = 0, HT_CHANNEL_WIDTH_20_40 = 1, } HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; -// -// Represent Extension Channel Offset in HT Capabilities -// This is available only in 40Mhz mode. -// +/* Represent Extension Channel Offset in HT Capabilities + * This is available only in 40Mhz mode. */ typedef enum _HT_EXTCHNL_OFFSET { HT_EXTCHNL_OFFSET_NO_EXT = 0, HT_EXTCHNL_OFFSET_UPPER = 1, @@ -76,13 +66,13 @@ typedef enum _HT_EXTCHNL_OFFSET { } HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; typedef enum _CHNLOP { - CHNLOP_NONE = 0, // No Action now - CHNLOP_SCAN = 1, // Scan in progress - CHNLOP_SWBW = 2, // Bandwidth switching in progress - CHNLOP_SWCHNL = 3, // Software Channel switching in progress + CHNLOP_NONE = 0, /* No Action now */ + CHNLOP_SCAN = 1, /* Scan in progress */ + CHNLOP_SWBW = 2, /* Bandwidth switching in progress */ + CHNLOP_SWCHNL = 3, /* Software Channel switching in progress */ } CHNLOP, *PCHNLOP; -// Determine if the Channel Operation is in progress +/* Determine if the Channel Operation is in progress */ #define CHHLOP_IN_PROGRESS(_pHTInfo) \ ((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE @@ -101,7 +91,7 @@ typedef enum _HT_ACTION { } HT_ACTION, *PHT_ACTION; -/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */ +/* Define sub-carrier mode for 40MHZ. */ typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier { SC_MODE_DUPLICATE = 0, SC_MODE_LOWER = 1, @@ -111,7 +101,7 @@ typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier { typedef struct _HT_CAPABILITY_ELE { - //HT capability info + /* HT capability info */ u8 AdvCoding:1; u8 ChlWidth:1; u8 MimoPwrSave:2; @@ -127,30 +117,30 @@ typedef struct _HT_CAPABILITY_ELE { u8 Rsvd1:1; u8 LSigTxopProtect:1; - //MAC HT parameters info + /* MAC HT parameters info */ u8 MaxRxAMPDUFactor:2; u8 MPDUDensity:3; u8 Rsvd2:3; - //Supported MCS set + /* Supported MCS set */ u8 MCS[16]; - //Extended HT Capability Info + /* Extended HT Capability Info */ u16 ExtHTCapInfo; - //TXBF Capabilities + /* TXBF Capabilities */ u8 TxBFCap[4]; - //Antenna Selection Capabilities + /* Antenna Selection Capabilities */ u8 ASCap; } __packed HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE; -//------------------------------------------------------------ -// The HT Information element is present in beacons -// Only AP is required to include this element -//------------------------------------------------------------ +/*------------------------------------------------------------ + * The HT Information element is present in beacons + * Only AP is required to include this element + *------------------------------------------------------------*/ typedef struct _HT_INFORMATION_ELE { u8 ControlChl; @@ -179,10 +169,8 @@ typedef struct _HT_INFORMATION_ELE { u8 BasicMSC[16]; } __packed HT_INFORMATION_ELE, *PHT_INFORMATION_ELE; -// -// MIMO Power Save control field. -// This is appear in MIMO Power Save Action Frame -// +/* MIMO Power Save control field. + * This is appear in MIMO Power Save Action Frame */ typedef struct _MIMOPS_CTRL { u8 MimoPsEnable:1; u8 MimoPsMode:1; @@ -200,63 +188,66 @@ typedef enum _HT_AGGRE_MODE_E { HT_AGG_FORCE_DISABLE = 2, } HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E; -//------------------------------------------------------------ -// The Data structure is used to keep HT related variables when card is -// configured as non-AP STA mode. **Note** Current_xxx should be set -// to default value in HTInitializeHTInfo() -//------------------------------------------------------------ +/*---------------------------------------------------------------------------- + * The Data structure is used to keep HT related variables when card is + * configured as non-AP STA mode. + * **Note** Current_xxx should be set to default value in HTInitializeHTInfo() + *----------------------------------------------------------------------------*/ typedef struct _RT_HIGH_THROUGHPUT { -// DECLARE_RT_OBJECT(_RT_HIGH_THROUGHPUT); u8 bEnableHT; u8 bCurrentHTSupport; - - u8 bRegBW40MHz; // Tx 40MHz channel capability - u8 bCurBW40MHz; // Tx 40MHz channel capability - - u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz - u8 bCurShortGI40MHz; // Tx Short GI for 40MHz - - u8 bRegShortGI20MHz; // Tx Short GI for 20MHz - u8 bCurShortGI20MHz; // Tx Short GI for 20MHz - - u8 bRegSuppCCK; // Tx CCK rate capability - u8 bCurSuppCCK; // Tx CCK rate capability - - // 802.11n spec version for "peer" + /* Tx 40MHz channel capability */ + u8 bRegBW40MHz; + u8 bCurBW40MHz; + /* Tx Short GI for 40Mhz */ + u8 bRegShortGI40MHz; + u8 bCurShortGI40MHz; + /* Tx Short GI for 20MHz */ + u8 bRegShortGI20MHz; + u8 bCurShortGI20MHz; + /* Tx CCK rate capability */ + u8 bRegSuppCCK; + u8 bCurSuppCCK; + + /* 802.11n spec version for "peer" */ HT_SPEC_VER ePeerHTSpecVer; - // HT related information for "Self" - HT_CAPABILITY_ELE SelfHTCap; // This is HT cap element sent to peer STA, which also indicate HT Rx capabilities. - HT_INFORMATION_ELE SelfHTInfo; // This is HT info element sent to peer STA, which also indicate HT Rx capabilities. + /* HT related information for "Self" */ + /* This is HT cap element sent to peer STA, which also indicate + * HT Rx capabilities. */ + HT_CAPABILITY_ELE SelfHTCap; + HT_INFORMATION_ELE SelfHTInfo; - // HT related information for "Peer" + /* HT related information for "Peer" */ u8 PeerHTCapBuf[32]; u8 PeerHTInfoBuf[32]; - // A-MSDU related - u8 bAMSDU_Support; // This indicates Tx A-MSDU capability - u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability - u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability - u16 nCurrent_AMSDU_MaxSize; // This indicates Tx A-MSDU capability + /* A-MSDU related */ + /* This indicates Tx A-MSDU capability */ + u8 bAMSDU_Support; + u16 nAMSDU_MaxSize; + u8 bCurrent_AMSDU_Support; + u16 nCurrent_AMSDU_MaxSize; - // AMPDU related <2006.08.10 Emily> - u8 bAMPDUEnable; // This indicate Tx A-MPDU capability - u8 bCurrentAMPDUEnable; // This indicate Tx A-MPDU capability - u8 AMPDU_Factor; // This indicate Tx A-MPDU capability - u8 CurrentAMPDUFactor; // This indicate Tx A-MPDU capability - u8 MPDU_Density; // This indicate Tx A-MPDU capability - u8 CurrentMPDUDensity; // This indicate Tx A-MPDU capability + /* A-MPDU related */ + /* This indicate Tx A-MPDU capability */ + u8 bAMPDUEnable; + u8 bCurrentAMPDUEnable; + u8 AMPDU_Factor; + u8 CurrentAMPDUFactor; + u8 MPDU_Density; + u8 CurrentMPDUDensity; - // Forced A-MPDU enable + /* Forced A-MPDU enable */ HT_AGGRE_MODE_E ForcedAMPDUMode; u8 ForcedAMPDUFactor; u8 ForcedMPDUDensity; - // Forced A-MSDU enable + /* Forced A-MSDU enable */ HT_AGGRE_MODE_E ForcedAMSDUMode; u16 ForcedAMSDUMaxSize; @@ -264,29 +255,28 @@ typedef struct _RT_HIGH_THROUGHPUT { u8 CurrentOpMode; - // MIMO PS related + /* MIMO PS related */ u8 SelfMimoPs; u8 PeerMimoPs; - // 40MHz Channel Offset settings. + /* 40MHz Channel Offset settings. */ HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; - u8 bCurTxBW40MHz; // If we use 40 MHz to Tx + u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */ u8 PeerBandwidth; - // For Bandwidth Switching + /* For Bandwidth Switching */ u8 bSwBwInProgress; - CHNLOP ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15. + CHNLOP ChnlOp; /* software switching channel in progress. */ u8 SwBwStep; - //RT_TIMER SwBwTimer; struct timer_list SwBwTimer; - // For Realtek proprietary A-MPDU factor for aggregation + /* For Realtek proprietary A-MPDU factor for aggregation */ u8 bRegRT2RTAggregation; u8 bCurrentRT2RTAggregation; u8 bCurrentRT2RTLongSlotTime; u8 szRT2RTAggBuffer[10]; - // Rx Reorder control + /* Rx Reorder control */ u8 bRegRxReorderEnable; u8 bCurRxReorderEnable; u8 RxReorderWinSize; @@ -303,18 +293,18 @@ typedef struct _RT_HIGH_THROUGHPUT { u8 UsbRxFwAggrTimeout; #endif - // Add for Broadcom(Linksys) IOT. Joseph + /* Add for Broadcom(Linksys) IOT. */ u8 bIsPeerBcm; - // For IOT issue. + /* For IOT issue. */ u32 IOTAction; } RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; -//------------------------------------------------------------ -// The Data structure is used to keep HT related variable for "each Sta" -// when card is configured as "AP mode" -//------------------------------------------------------------ +/*---------------------------------------------------------------------- + * The Data structure is used to keep HT related variable for "each Sta" + * when card is configured as "AP mode" + *----------------------------------------------------------------------*/ typedef struct _RT_HTINFO_STA_ENTRY { u8 bEnableHT; @@ -341,24 +331,22 @@ typedef struct _RT_HTINFO_STA_ENTRY { -//------------------------------------------------------------ -// The Data structure is used to keep HT related variable for "each AP" -// when card is configured as "STA mode" -//------------------------------------------------------------ +/*--------------------------------------------------------------------- + * The Data structure is used to keep HT related variable for "each AP" + * when card is configured as "STA mode" + *---------------------------------------------------------------------*/ typedef struct _BSS_HT { u8 bdSupportHT; - // HT related elements + /* HT related elements */ u8 bdHTCapBuf[32]; u16 bdHTCapLen; u8 bdHTInfoBuf[32]; u16 bdHTInfoLen; HT_SPEC_VER bdHTSpecVer; - //HT_CAPABILITY_ELE bdHTCapEle; - //HT_INFORMATION_ELE bdHTInfoEle; u8 bdRT2RTAggregation; u8 bdRT2RTLongSlotTime; @@ -387,4 +375,4 @@ typedef struct _FALSE_ALARM_STATISTICS { -#endif //__INC_HTTYPE_H +#endif