From: David Daney Date: Tue, 22 Nov 2011 14:47:03 +0000 (+0000) Subject: MIPS: Octeon: Rearrange CVMX files in preperation for device tree X-Git-Tag: firefly_0821_release~3680^2~3717^2^6~6 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=37d3bfd9927a8c509d31eac1036b2c3c905f8241;p=firefly-linux-kernel-4.4.55.git MIPS: Octeon: Rearrange CVMX files in preperation for device tree Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: devel@driverdev.osuosl.org Acked-by: Greg Kroah-Hartman Patchwork: https://patchwork.linux-mips.org/patch/2941/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c index 464347ffd362..0c0bf5d30e70 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c @@ -326,6 +326,10 @@ static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports) return 0; } +int __cvmx_helper_sgmii_enumerate(int interface) +{ + return 4; +} /** * Probe a SGMII interface and determine the number of ports * connected to it. The SGMII interface should still be down after @@ -347,7 +351,7 @@ int __cvmx_helper_sgmii_probe(int interface) mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); mode.s.en = 1; cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64); - return 4; + return __cvmx_helper_sgmii_enumerate(interface); } /** diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c index 02a444230ef7..2830e4bdf7f3 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c @@ -51,6 +51,16 @@ void __cvmx_interrupt_stxx_int_msk_enable(int index); #define CVMX_HELPER_SPI_TIMEOUT 10 #endif +int __cvmx_helper_spi_enumerate(int interface) +{ + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + cvmx_spi4000_is_present(interface)) { + return 10; + } else { + return 16; + } +} + /** * Probe a SPI interface and determine the number of ports * connected to it. The SPI interface should still be down after diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c index 667a8e3cb142..1723248e987d 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c @@ -44,6 +44,19 @@ void __cvmx_interrupt_gmxx_enable(int interface); void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block); void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index); + +int __cvmx_helper_xaui_enumerate(int interface) +{ + union cvmx_gmxx_hg2_control gmx_hg2_control; + + /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */ + gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface)); + if (gmx_hg2_control.s.hg2tx_en) + return 16; + else + return 1; +} + /** * Probe a XAUI interface and determine the number of ports * connected to it. The XAUI interface should still be down @@ -56,7 +69,6 @@ void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index); int __cvmx_helper_xaui_probe(int interface) { int i; - union cvmx_gmxx_hg2_control gmx_hg2_control; union cvmx_gmxx_inf_mode mode; /* @@ -90,13 +102,7 @@ int __cvmx_helper_xaui_probe(int interface) pko_mem_port_ptrs.s.pid = interface * 16 + i; cvmx_write_csr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64); } - - /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */ - gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface)); - if (gmx_hg2_control.s.hg2tx_en) - return 16; - else - return 1; + return __cvmx_helper_xaui_enumerate(interface); } /** diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c index daa8c8bbcfe4..fa4963856353 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -234,21 +234,16 @@ static int __cvmx_helper_port_setup_ipd(int ipd_port) } /** - * This function probes an interface to determine the actual - * number of hardware ports connected to it. It doesn't setup the - * ports or enable them. The main goal here is to set the global - * interface_port_count[interface] correctly. Hardware setup of the - * ports will be performed later. + * This function sets the interface_port_count[interface] correctly, + * without modifying any hardware configuration. Hardware setup of + * the ports will be performed later. * * @interface: Interface to probe * * Returns Zero on success, negative on failure */ -int cvmx_helper_interface_probe(int interface) +int cvmx_helper_interface_enumerate(int interface) { - /* At this stage in the game we don't want packets to be moving yet. - The following probe calls should perform hardware setup - needed to determine port counts. Receive must still be disabled */ switch (cvmx_helper_interface_get_mode(interface)) { /* These types don't support ports to IPD/PKO */ case CVMX_HELPER_INTERFACE_MODE_DISABLED: @@ -258,7 +253,7 @@ int cvmx_helper_interface_probe(int interface) /* XAUI is a single high speed port */ case CVMX_HELPER_INTERFACE_MODE_XAUI: interface_port_count[interface] = - __cvmx_helper_xaui_probe(interface); + __cvmx_helper_xaui_enumerate(interface); break; /* * RGMII/GMII/MII are all treated about the same. Most @@ -267,7 +262,7 @@ int cvmx_helper_interface_probe(int interface) case CVMX_HELPER_INTERFACE_MODE_RGMII: case CVMX_HELPER_INTERFACE_MODE_GMII: interface_port_count[interface] = - __cvmx_helper_rgmii_probe(interface); + __cvmx_helper_rgmii_enumerate(interface); break; /* * SPI4 can have 1-16 ports depending on the device at @@ -275,7 +270,7 @@ int cvmx_helper_interface_probe(int interface) */ case CVMX_HELPER_INTERFACE_MODE_SPI: interface_port_count[interface] = - __cvmx_helper_spi_probe(interface); + __cvmx_helper_spi_enumerate(interface); break; /* * SGMII can have 1-4 ports depending on how many are @@ -284,12 +279,12 @@ int cvmx_helper_interface_probe(int interface) case CVMX_HELPER_INTERFACE_MODE_SGMII: case CVMX_HELPER_INTERFACE_MODE_PICMG: interface_port_count[interface] = - __cvmx_helper_sgmii_probe(interface); + __cvmx_helper_sgmii_enumerate(interface); break; /* PCI target Network Packet Interface */ case CVMX_HELPER_INTERFACE_MODE_NPI: interface_port_count[interface] = - __cvmx_helper_npi_probe(interface); + __cvmx_helper_npi_enumerate(interface); break; /* * Special loopback only ports. These are not the same @@ -297,7 +292,7 @@ int cvmx_helper_interface_probe(int interface) */ case CVMX_HELPER_INTERFACE_MODE_LOOP: interface_port_count[interface] = - __cvmx_helper_loop_probe(interface); + __cvmx_helper_loop_enumerate(interface); break; } @@ -312,6 +307,74 @@ int cvmx_helper_interface_probe(int interface) return 0; } +/** + * This function probes an interface to determine the actual + * number of hardware ports connected to it. It doesn't setup the + * ports or enable them. The main goal here is to set the global + * interface_port_count[interface] correctly. Hardware setup of the + * ports will be performed later. + * + * @interface: Interface to probe + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_interface_probe(int interface) +{ + cvmx_helper_interface_enumerate(interface); + /* At this stage in the game we don't want packets to be moving yet. + The following probe calls should perform hardware setup + needed to determine port counts. Receive must still be disabled */ + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + __cvmx_helper_xaui_probe(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + __cvmx_helper_rgmii_probe(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end. + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + __cvmx_helper_spi_probe(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up. + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + __cvmx_helper_sgmii_probe(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + __cvmx_helper_npi_probe(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode. + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + __cvmx_helper_loop_probe(interface); + break; + } + + /* Make sure all global variables propagate to other cores */ + CVMX_SYNCWS; + + return 0; +} + /** * Setup the IPD/PIP for the ports on an interface. Packet * classification and tagging are set for every port on the diff --git a/arch/mips/include/asm/octeon/cvmx-helper-loop.h b/arch/mips/include/asm/octeon/cvmx-helper-loop.h index e646a6ccce75..077f0e9d3b2d 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-loop.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-loop.h @@ -44,6 +44,7 @@ * Returns Number of ports on the interface. Zero to disable. */ extern int __cvmx_helper_loop_probe(int interface); +static inline int __cvmx_helper_loop_enumerate(int interface) {return 4; } /** * Bringup and enable a LOOP interface. After this call packet diff --git a/arch/mips/include/asm/octeon/cvmx-helper-npi.h b/arch/mips/include/asm/octeon/cvmx-helper-npi.h index 908e7b08c214..8df4c7fafdba 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-npi.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-npi.h @@ -45,6 +45,7 @@ * Returns Number of ports on the interface. Zero to disable. */ extern int __cvmx_helper_npi_probe(int interface); +#define __cvmx_helper_npi_enumerate __cvmx_helper_npi_probe /** * Bringup and enable a NPI interface. After this call packet diff --git a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h index ea2652604a57..78295ba0050f 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h @@ -43,6 +43,7 @@ * Returns Number of RGMII/GMII/MII ports (0-4). */ extern int __cvmx_helper_rgmii_probe(int interface); +#define __cvmx_helper_rgmii_enumerate __cvmx_helper_rgmii_probe /** * Put an RGMII interface in loopback mode. Internal packets sent diff --git a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h index 19b48d60857f..9a9b6c103ede 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h @@ -45,6 +45,7 @@ * Returns Number of ports on the interface. Zero to disable. */ extern int __cvmx_helper_sgmii_probe(int interface); +extern int __cvmx_helper_sgmii_enumerate(int interface); /** * Bringup and enable a SGMII interface. After this call packet diff --git a/arch/mips/include/asm/octeon/cvmx-helper-spi.h b/arch/mips/include/asm/octeon/cvmx-helper-spi.h index 69bac036d10e..9f1c6b968f91 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-spi.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-spi.h @@ -42,6 +42,7 @@ * Returns Number of ports on the interface. Zero to disable. */ extern int __cvmx_helper_spi_probe(int interface); +extern int __cvmx_helper_spi_enumerate(int interface); /** * Bringup and enable a SPI interface. After this call packet I/O diff --git a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h index 4b4db2f93cd4..f6fbc4f45b56 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h @@ -45,6 +45,7 @@ * Returns Number of ports on the interface. Zero to disable. */ extern int __cvmx_helper_xaui_probe(int interface); +extern int __cvmx_helper_xaui_enumerate(int interface); /** * Bringup and enable a XAUI interface. After this call packet diff --git a/arch/mips/include/asm/octeon/cvmx-helper.h b/arch/mips/include/asm/octeon/cvmx-helper.h index 51916f3cc40c..3169cd79f2ac 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper.h +++ b/arch/mips/include/asm/octeon/cvmx-helper.h @@ -207,6 +207,7 @@ extern int cvmx_helper_link_set(int ipd_port, * Returns Zero on success, negative on failure */ extern int cvmx_helper_interface_probe(int interface); +extern int cvmx_helper_interface_enumerate(int interface); /** * Configure a port for internal and/or external loopback. Internal loopback