From: Alison Schofield Date: Fri, 9 Oct 2015 04:18:03 +0000 (-0700) Subject: staging: wilc1000: remove braces around single statement blocks X-Git-Tag: firefly_0821_release~176^2~802^2~962 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=39823a50ff371cbaa0baa7ccb7a479e61375b4a0;p=firefly-linux-kernel-4.4.55.git staging: wilc1000: remove braces around single statement blocks Remove excess braces as suggested by checkpatch.pl: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Alison Schofield Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c index 1d23badb5453..d3f39557c64a 100644 --- a/drivers/staging/wilc1000/wilc_wlan.c +++ b/drivers/staging/wilc1000/wilc_wlan.c @@ -171,9 +171,9 @@ static struct txq_entry_t *wilc_wlan_txq_remove_from_head(void) if (p->txq_head) { tqe = p->txq_head; p->txq_head = tqe->next; - if (p->txq_head) { + if (p->txq_head) p->txq_head->prev = NULL; - } + p->txq_entries -= 1; @@ -312,9 +312,8 @@ static inline int add_TCP_track_session(u32 src_prt, u32 dst_prt, u32 seq) static inline int Update_TCP_track_session(u32 index, u32 Ack) { - if (Ack > Acks_keep_track_info[index].Bigger_Ack_num) { + if (Ack > Acks_keep_track_info[index].Bigger_Ack_num) Acks_keep_track_info[index].Bigger_Ack_num = Ack; - } return 0; } @@ -388,9 +387,9 @@ static inline int tcp_process(struct txq_entry_t *tqe) break; } } - if (i == Opened_TCP_session) { + if (i == Opened_TCP_session) add_TCP_track_session(0, 0, seq_no); - } + add_TCP_Pending_Ack(Ack_no, i, tqe); @@ -671,9 +670,9 @@ static inline void chip_wakeup(void) usleep_range(2 * 1000, 2 * 1000); /* Make sure chip is awake. This is an extra step that can be removed */ /* later to avoid the bus access overhead */ - if ((wilc_get_chipid(true) == 0)) { + if ((wilc_get_chipid(true) == 0)) wilc_debug(N_ERR, "Couldn't read chip id. Wake up failed\n"); - } + } while ((wilc_get_chipid(true) == 0) && ((++trials % 3) == 0)); } while (wilc_get_chipid(true) == 0); @@ -697,9 +696,9 @@ static inline void chip_wakeup(void) /* later to avoid the bus access overhead */ g_wlan.hif_func.hif_read_reg(0xf1, &clk_status_reg); - if ((clk_status_reg & 0x1) == 0) { + if ((clk_status_reg & 0x1) == 0) wilc_debug(N_ERR, "clocks still OFF. Wake up failed\n"); - } + } /* in case of failure, Reset the wakeup bit to introduce a new edge on the next loop */ if ((clk_status_reg & 0x1) == 0) { @@ -761,9 +760,9 @@ static inline void chip_wakeup(void) /* Make sure chip is awake. This is an extra step that can be removed */ /* later to avoid the bus access overhead */ - if ((wilc_get_chipid(true) == 0)) { + if ((wilc_get_chipid(true) == 0)) wilc_debug(N_ERR, "Couldn't read chip id. Wake up failed\n"); - } + } while ((wilc_get_chipid(true) == 0) && ((++trials % 3) == 0)); } while (wilc_get_chipid(true) == 0); @@ -850,23 +849,23 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount) do { if ((tqe != NULL) && (i < (WILC_VMM_TBL_SIZE - 1)) /* reserve last entry to 0 */) { - if (tqe->type == WILC_CFG_PKT) { + if (tqe->type == WILC_CFG_PKT) vmm_sz = ETH_CONFIG_PKT_HDR_OFFSET; - } - else if (tqe->type == WILC_NET_PKT) { + + else if (tqe->type == WILC_NET_PKT) vmm_sz = ETH_ETHERNET_HDR_OFFSET; - } - else { + + else vmm_sz = HOST_HDR_OFFSET; - } + vmm_sz += tqe->buffer_size; PRINT_D(TX_DBG, "VMM Size before alignment = %d\n", vmm_sz); if (vmm_sz & 0x3) { /* has to be word aligned */ vmm_sz = (vmm_sz + 4) & ~0x3; } - if ((sum + vmm_sz) > LINUX_TX_SIZE) { + if ((sum + vmm_sz) > LINUX_TX_SIZE) break; - } + PRINT_D(TX_DBG, "VMM Size AFTER alignment = %d\n", vmm_sz); vmm_table[i] = vmm_sz / 4; /* table take the word size */ PRINT_D(TX_DBG, "VMMTable entry size = %d\n", vmm_table[i]); @@ -929,9 +928,8 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount) } } while (!p->quit); - if (!ret) { + if (!ret) goto _end_; - } timeout = 200; do { @@ -983,9 +981,8 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount) break; } - if (!ret) { + if (!ret) break; - } if (entries == 0) { PRINT_WRN(GENERIC_DBG, "[wilc txq]: no more buffer in the chip (reg: %08x), retry later [[ %d, %x ]]\n", reg, i, vmm_table[i - 1]); @@ -1008,9 +1005,9 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount) } } while (1); - if (!ret) { + if (!ret) goto _end_; - } + if (entries == 0) { ret = WILC_TX_ERR_NO_BUF; goto _end_; @@ -1066,9 +1063,8 @@ int wilc_wlan_handle_txq(u32 *pu32TxqCount) if (tqe->tx_complete_func) tqe->tx_complete_func(tqe->priv, tqe->status); #ifdef TCP_ACK_FILTER - if (tqe->tcp_PendingAck_index != NOT_TCP_ACK) { + if (tqe->tcp_PendingAck_index != NOT_TCP_ACK) Pending_Acks_info[tqe->tcp_PendingAck_index].txqe = NULL; - } #endif kfree(tqe); } else { @@ -1197,9 +1193,8 @@ static void wilc_wlan_handle_rxq(void) * wake up the waiting task... **/ PRINT_D(RX_DBG, "p->cfg_seq_no = %d - rsp.seq_no = %d\n", p->cfg_seq_no, rsp.seq_no); - if (p->cfg_seq_no == rsp.seq_no) { + if (p->cfg_seq_no == rsp.seq_no) up(&g_linux_wlan->cfg_event); - } } else if (rsp.type == WILC_CFG_RSP_STATUS) { /** * Call back to indicate status... @@ -1222,9 +1217,9 @@ static void wilc_wlan_handle_rxq(void) #endif kfree(rqe); - if (has_packet) { + if (has_packet) linux_wlan_rx_complete(); - } + } while (1); p->rxq_exit = 1; @@ -1365,9 +1360,9 @@ void wilc_handle_isr(void) acquire_bus(ACQUIRE_AND_WAKEUP); g_wlan.hif_func.hif_read_int(&int_status); - if (int_status & PLL_INT_EXT) { + if (int_status & PLL_INT_EXT) wilc_pllupdate_isr_ext(int_status); - } + if (int_status & DATA_INT_EXT) { wilc_wlan_handle_isr_ext(int_status); #ifndef WILC_OPTIMIZE_SLEEP_INT @@ -1375,9 +1370,8 @@ void wilc_handle_isr(void) genuChipPSstate = CHIP_WAKEDUP; #endif } - if (int_status & SLEEP_INT_EXT) { + if (int_status & SLEEP_INT_EXT) wilc_sleeptimer_isr_ext(int_status); - } if (!(int_status & (ALL_INT_EXT))) { #ifdef WILC_SDIO @@ -2052,9 +2046,8 @@ u16 Set_machw_change_vir_if(bool bValue) /*Reset WILC_CHANGING_VIR_IF register to allow adding futrue keys to CE H/W*/ mutex_lock(&g_linux_wlan->hif_cs); ret = (&g_wlan)->hif_func.hif_read_reg(WILC_CHANGING_VIR_IF, ®); - if (!ret) { + if (!ret) PRINT_ER("Error while Reading reg WILC_CHANGING_VIR_IF\n"); - } if (bValue) reg |= BIT(31); @@ -2063,9 +2056,9 @@ u16 Set_machw_change_vir_if(bool bValue) ret = (&g_wlan)->hif_func.hif_write_reg(WILC_CHANGING_VIR_IF, reg); - if (!ret) { + if (!ret) PRINT_ER("Error while writing reg WILC_CHANGING_VIR_IF\n"); - } + mutex_unlock(&g_linux_wlan->hif_cs); return ret;