From: Antti Palosaari Date: Tue, 12 Jun 2012 19:45:54 +0000 (-0300) Subject: [media] ec168: convert to new DVB USB X-Git-Tag: firefly_0821_release~3680^2~275^2~1658 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=3eee04722fa18f8e1db1730b2e508b6eb6f5336b;p=firefly-linux-kernel-4.4.55.git [media] ec168: convert to new DVB USB Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 3e75fcdb33cc..abbfd528a8db 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -374,7 +374,7 @@ config DVB_USB_FRIIO config DVB_USB_EC168 tristate "E3C EC168 DVB-T USB2.0 support" - depends on DVB_USB + depends on DVB_USB_V2 select DVB_EC100 select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE help diff --git a/drivers/media/dvb/dvb-usb/ec168.c b/drivers/media/dvb/dvb-usb/ec168.c index b4989ba8897d..864195a56afb 100644 --- a/drivers/media/dvb/dvb-usb/ec168.c +++ b/drivers/media/dvb/dvb-usb/ec168.c @@ -29,17 +29,13 @@ module_param_named(debug, dvb_usb_ec168_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static struct ec100_config ec168_ec100_config; - -static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req) +static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req) { int ret; unsigned int pipe; u8 request, requesttype; u8 *buf; - - switch (req->cmd) { case DOWNLOAD_FIRMWARE: case GPIO: @@ -83,15 +79,15 @@ static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req) if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { /* write */ memcpy(buf, req->data, req->size); - pipe = usb_sndctrlpipe(udev, 0); + pipe = usb_sndctrlpipe(d->udev, 0); } else { /* read */ - pipe = usb_rcvctrlpipe(udev, 0); + pipe = usb_rcvctrlpipe(d->udev, 0); } msleep(1); /* avoid I2C errors */ - ret = usb_control_msg(udev, pipe, request, requesttype, req->value, + ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value, req->index, buf, req->size, EC168_USB_TIMEOUT); ec168_debug_dump(request, requesttype, req->value, req->index, buf, @@ -116,12 +112,9 @@ error: return ret; } -static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req) -{ - return ec168_rw_udev(d->udev, req); -} - /* I2C */ +static struct ec100_config ec168_ec100_config; + static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { @@ -181,7 +174,6 @@ error: return i; } - static u32 ec168_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; @@ -193,56 +185,32 @@ static struct i2c_algorithm ec168_i2c_algo = { }; /* Callbacks for DVB USB */ -static struct ec100_config ec168_ec100_config = { - .demod_address = 0xff, /* not real address, demod is integrated */ -}; - -static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap) +static int ec168_identify_state(struct dvb_usb_device *d) { + int ret; + u8 reply; + struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply}; deb_info("%s:\n", __func__); - adap->fe_adap[0].fe = dvb_attach(ec100_attach, &ec168_ec100_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) - return -ENODEV; - return 0; -} + ret = ec168_ctrl_msg(d, &req); + if (ret) + goto error; -static struct mxl5005s_config ec168_mxl5003s_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_OFF, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; + deb_info("%s: reply:%02x\n", __func__, reply); -static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) -{ - deb_info("%s:\n", __func__); - return dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, - &ec168_mxl5003s_config) == NULL ? -ENODEV : 0; -} + if (reply == 0x01) + ret = WARM; + else + ret = COLD; -static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL}; - deb_info("%s: onoff:%d\n", __func__, onoff); - if (onoff) - req.index = 0x0102; - return ec168_ctrl_msg(adap->dev, &req); + return ret; +error: + deb_info("%s: failed:%d\n", __func__, ret); + return ret; } -static int ec168_download_firmware(struct usb_device *udev, - const struct firmware *fw) +static int ec168_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) { int i, len, packets, remainder, ret; u16 addr = 0x0000; /* firmware start address */ @@ -262,7 +230,7 @@ static int ec168_download_firmware(struct usb_device *udev, req.index = addr; addr += FW_PACKET_MAX_DATA; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) { err("firmware download failed:%d packet:%d", ret, i); goto error; @@ -274,7 +242,7 @@ static int ec168_download_firmware(struct usb_device *udev, req.cmd = SET_CONFIG; req.value = 0; req.index = 0x0001; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) goto error; @@ -282,7 +250,7 @@ static int ec168_download_firmware(struct usb_device *udev, req.cmd = GPIO; req.value = 0; req.index = 0x0206; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) goto error; @@ -290,7 +258,7 @@ static int ec168_download_firmware(struct usb_device *udev, req.cmd = WRITE_I2C; req.value = 0; req.index = 0x00c6; - ret = ec168_rw_udev(udev, &req); + ret = ec168_ctrl_msg(d, &req); if (ret) goto error; @@ -300,93 +268,76 @@ error: return ret; } -static int ec168_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, int *cold) +static struct ec100_config ec168_ec100_config = { + .demod_address = 0xff, /* not real address, demod is integrated */ +}; + +static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap) { - int ret; - u8 reply; - struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply}; deb_info("%s:\n", __func__); + adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config, + &adap->dev->i2c_adap); + if (adap->fe[0] == NULL) + return -ENODEV; - ret = ec168_rw_udev(udev, &req); - if (ret) - goto error; - - deb_info("%s: reply:%02x\n", __func__, reply); - - if (reply == 0x01) - *cold = 0; - else - *cold = 1; - - return ret; -error: - deb_info("%s: failed:%d\n", __func__, ret); - return ret; + return 0; } -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties ec168_properties; +static struct mxl5005s_config ec168_mxl5003s_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_OFF, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; -static int ec168_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) { - int ret; - deb_info("%s: interface:%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL, - adapter_nr); - if (ret) - goto error; - - return ret; -error: - deb_info("%s: failed:%d\n", __func__, ret); - return ret; + deb_info("%s:\n", __func__); + return dvb_attach(mxl5005s_attach, adap->fe[0], + &adap->dev->i2c_adap, + &ec168_mxl5003s_config) == NULL ? -ENODEV : 0; } -#define E3C_EC168_1689 0 -#define E3C_EC168_FFFA 1 -#define E3C_EC168_FFFB 2 -#define E3C_EC168_1001 3 -#define E3C_EC168_1002 4 - -static struct usb_device_id ec168_id[] = { - [E3C_EC168_1689] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)}, - [E3C_EC168_FFFA] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)}, - [E3C_EC168_FFFB] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)}, - [E3C_EC168_1001] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)}, - [E3C_EC168_1002] = - {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)}, - {} /* terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, ec168_id); +static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL}; + deb_info("%s: onoff:%d\n", __func__, onoff); + if (onoff) + req.index = 0x0102; + return ec168_ctrl_msg(adap->dev, &req); +} -static struct dvb_usb_device_properties ec168_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, +/* DVB USB Driver stuff */ +/* bInterfaceNumber 0 is HID + * bInterfaceNumber 1 is DVB-T */ +static struct dvb_usb_device_properties ec168_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .bInterfaceNumber = 1, - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = ec168_download_firmware, + .identify_state = ec168_identify_state, .firmware = "dvb-usb-ec168.fw", - .no_reconnect = 1, + .download_firmware = ec168_download_firmware, - .size_of_priv = 0, + .i2c_algo = &ec168_i2c_algo, + .frontend_attach = ec168_ec100_frontend_attach, + .tuner_attach = ec168_mxl5003s_tuner_attach, + .streaming_ctrl = ec168_streaming_ctrl, .num_adapters = 1, .adapter = { { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = ec168_streaming_ctrl, - .frontend_attach = ec168_ec100_frontend_attach, - .tuner_attach = ec168_mxl5003s_tuner_attach, .stream = { .type = USB_BULK, .count = 6, @@ -397,35 +348,39 @@ static struct dvb_usb_device_properties ec168_properties = { } } }, - }}, } }, +}; - .identify_state = ec168_identify_state, - - .i2c_algo = &ec168_i2c_algo, +static const struct dvb_usb_driver_info ec168_driver_info = { + .name = "E3C EC168 reference design", + .props = &ec168_props, +}; - .num_device_descs = 1, - .devices = { - { - .name = "E3C EC168 DVB-T USB2.0 reference design", - .cold_ids = { - &ec168_id[E3C_EC168_1689], - &ec168_id[E3C_EC168_FFFA], - &ec168_id[E3C_EC168_FFFB], - &ec168_id[E3C_EC168_1001], - &ec168_id[E3C_EC168_1002], - NULL}, - .warm_ids = {NULL}, - }, - } +static const struct usb_device_id ec168_id[] = { + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5), + .driver_info = (kernel_ulong_t) &ec168_driver_info }, + {} }; +MODULE_DEVICE_TABLE(usb, ec168_id); static struct usb_driver ec168_driver = { - .name = "dvb_usb_ec168", - .probe = ec168_probe, - .disconnect = dvb_usb_device_exit, - .id_table = ec168_id, + .name = KBUILD_MODNAME, + .id_table = ec168_id, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .suspend = dvb_usbv2_suspend, + .resume = dvb_usbv2_resume, + .no_dynamic_id = 1, + .soft_unbind = 1, }; module_usb_driver(ec168_driver); diff --git a/drivers/media/dvb/dvb-usb/ec168.h b/drivers/media/dvb/dvb-usb/ec168.h index e7e0b831314e..b33267b0e5cb 100644 --- a/drivers/media/dvb/dvb-usb/ec168.h +++ b/drivers/media/dvb/dvb-usb/ec168.h @@ -23,7 +23,17 @@ #define EC168_H #define DVB_USB_LOG_PREFIX "ec168" -#include "dvb-usb.h" +#include "dvb_usb.h" + +#ifdef CONFIG_DVB_USB_DEBUG +#define dprintk(var, level, args...) \ + do { if ((var & level)) printk(args); } while (0) +#define DVB_USB_DEBUG_STATUS +#else +#define dprintk(args...) +#define debug_dump(b, l, func) +#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" +#endif #define deb_info(args...) dprintk(dvb_usb_ec168_debug, 0x01, args) #define deb_rc(args...) dprintk(dvb_usb_ec168_debug, 0x02, args)