From: Jarkko Nikula Date: Tue, 15 Sep 2015 13:26:22 +0000 (+0300) Subject: spi: atmel: Remove needless bits_per_word and speed_hz tests X-Git-Tag: firefly_0821_release~176^2~581^2~31^2~100^2~5^5 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=3f8958cf9aaaac8a2bfc7417cb87db757eeb4465;p=firefly-linux-kernel-4.4.55.git spi: atmel: Remove needless bits_per_word and speed_hz tests SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. This makes possible to remove two if statements and remove one code block that is never executed. Signed-off-by: Jarkko Nikula Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index bf9ed380bb1c..1cc1f1e0d17f 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -871,14 +871,7 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as, * Calculate the lowest divider that satisfies the * constraint, assuming div32/fdiv/mbz == 0. */ - if (xfer->speed_hz) - scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz); - else - /* - * This can happend if max_speed is null. - * In this case, we set the lowest possible speed - */ - scbr = 0xff; + scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz); /* * If the resulting divider doesn't fit into the @@ -1300,14 +1293,12 @@ static int atmel_spi_one_transfer(struct spi_master *master, return -EINVAL; } - if (xfer->bits_per_word) { - asd = spi->controller_state; - bits = (asd->csr >> 4) & 0xf; - if (bits != xfer->bits_per_word - 8) { - dev_dbg(&spi->dev, + asd = spi->controller_state; + bits = (asd->csr >> 4) & 0xf; + if (bits != xfer->bits_per_word - 8) { + dev_dbg(&spi->dev, "you can't yet change bits_per_word in transfers\n"); - return -ENOPROTOOPT; - } + return -ENOPROTOOPT; } /*