From: Stefan Roese <sr@denx.de>
Date: Fri, 31 Jan 2014 12:44:59 +0000 (+0100)
Subject: spi: fsl: Fix problem with multi message transfers
X-Git-Tag: firefly_0821_release~176^2~4201^2~5^6~2
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=4302a59629f7a0bd70fd1605d2b558597517372a;p=firefly-linux-kernel-4.4.55.git

spi: fsl: Fix problem with multi message transfers

When used via spidev with more than one messages to tranfer via
SPI_IOC_MESSAGE the current implementation would return with
-EINVAL, since bits_per_word and speed_hz are set in all
transfer structs. And in the 2nd loop status will stay at
-EINVAL as its not overwritten again via fsl_spi_setup_transfer().

This patch changes this behavious by first checking if one of
the messages uses different settings. If this is the case
the function will return with -EINVAL. If not, the messages
are transferred correctly.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
---

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 119f7af94537..4dcb2929c01f 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -362,18 +362,28 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t,
 static void fsl_spi_do_one_msg(struct spi_message *m)
 {
 	struct spi_device *spi = m->spi;
-	struct spi_transfer *t;
+	struct spi_transfer *t, *first;
 	unsigned int cs_change;
 	const int nsecs = 50;
 	int status;
 
-	cs_change = 1;
-	status = 0;
+	/* Don't allow changes if CS is active */
+	first = list_first_entry(&m->transfers, struct spi_transfer,
+			transfer_list);
 	list_for_each_entry(t, &m->transfers, transfer_list) {
-		if (t->bits_per_word || t->speed_hz) {
-			/* Don't allow changes if CS is active */
+		if ((first->bits_per_word != t->bits_per_word) ||
+			(first->speed_hz != t->speed_hz)) {
 			status = -EINVAL;
+			dev_err(&spi->dev,
+				"bits_per_word/speed_hz should be same for the same SPI transfer\n");
+			return;
+		}
+	}
 
+	cs_change = 1;
+	status = -EINVAL;
+	list_for_each_entry(t, &m->transfers, transfer_list) {
+		if (t->bits_per_word || t->speed_hz) {
 			if (cs_change)
 				status = fsl_spi_setup_transfer(spi, t);
 			if (status < 0)