From: Vitaly Wool Date: Mon, 9 Oct 2006 08:32:00 +0000 (-0700) Subject: USB: OHCI support for PNX8550 X-Git-Tag: firefly_0821_release~31823^2~11 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=5151d04068e37e710d2cc3962351ca0979fc5ad1;p=firefly-linux-kernel-4.4.55.git USB: OHCI support for PNX8550 OHCI HCD (Host Controller Driver) for USB. Bus Glue for PNX8550. Signed-off-by: Vitaly Wool Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index c31f00b7ab45..c1c1d871aba4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -885,6 +885,10 @@ MODULE_LICENSE ("GPL"); #include "ohci-au1xxx.c" #endif +#ifdef CONFIG_PNX8550 +#include "ohci-pnx8550.c" +#endif + #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC #include "ohci-ppc-soc.c" #endif diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c new file mode 100644 index 000000000000..6922b91b1704 --- /dev/null +++ b/drivers/usb/host/ohci-pnx8550.c @@ -0,0 +1,258 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * (C) Copyright 2002 Hewlett-Packard Company + * (C) Copyright 2005 Embedded Alley Solutions, Inc. + * + * Bus Glue for PNX8550 + * + * Written by Christopher Hoover + * Based on fragments of previous driver by Russell King et al. + * + * Modified for LH7A404 from ohci-sa1111.c + * by Durgesh Pattamatta + * + * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c + * by Vitaly Wool + * + * This file is licenced under the GPL. + */ + +#include +#include +#include +#include +#include + +#ifndef CONFIG_PNX8550 +#error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined." +#endif + +extern int usb_disabled(void); + +/*-------------------------------------------------------------------------*/ + +static void pnx8550_start_hc(struct platform_device *dev) +{ + /* + * Set register CLK48CTL to enable and 48MHz + */ + outl(0x00000003, PCI_BASE | 0x0004770c); + + /* + * Set register CLK12CTL to enable and 48MHz + */ + outl(0x00000003, PCI_BASE | 0x00047710); + + udelay(100); +} + +static void pnx8550_stop_hc(struct platform_device *dev) +{ + udelay(10); +} + + +/*-------------------------------------------------------------------------*/ + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + + +/** + * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_hcd_pnx8550_probe (const struct hc_driver *driver, + struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + + if (dev->resource[0].flags != IORESOURCE_MEM || + dev->resource[1].flags != IORESOURCE_IRQ) { + dev_err (&dev->dev,"invalid resource type\n"); + return -ENOMEM; + } + + hcd = usb_create_hcd (driver, &dev->dev, "pnx8550"); + if (!hcd) + return -ENOMEM; + hcd->rsrc_start = dev->resource[0].start; + hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] " + "failed\n", hcd->rsrc_start, hcd->rsrc_len); + retval = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n", + hcd->rsrc_start, hcd->rsrc_len); + retval = -ENOMEM; + goto err2; + } + + pnx8550_start_hc(dev); + + ohci_hcd_init(hcd_to_ohci(hcd)); + + retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + if (retval == 0) + return retval; + + pnx8550_stop_hc(dev); + iounmap(hcd->regs); + err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + err1: + usb_put_hcd(hcd); + return retval; +} + + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/** + * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + */ +void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + pnx8550_stop_hc(dev); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +/*-------------------------------------------------------------------------*/ + +static int __devinit +ohci_pnx8550_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; + + ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci); + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run (ohci)) < 0) { + err ("can't start %s", hcd->self.bus_name); + ohci_stop (hcd); + return ret; + } + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static const struct hc_driver ohci_pnx8550_hc_driver = { + .description = hcd_name, + .product_desc = "PNX8550 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .start = ohci_pnx8550_start, + .stop = ohci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ + +static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev) +{ + int ret; + + if (usb_disabled()) + return -ENODEV; + + ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev); + return ret; +} + +static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_hcd_pnx8550_remove(hcd, pdev); + return 0; +} + +MODULE_ALIAS("pnx8550-ohci"); + +static struct platform_driver ohci_hcd_pnx8550_driver = { + .driver = { + .name = "pnx8550-ohci", + }, + .probe = ohci_hcd_pnx8550_drv_probe, + .remove = ohci_hcd_pnx8550_drv_remove, +}; + +static int __init ohci_hcd_pnx8550_init (void) +{ + pr_debug (DRIVER_INFO " (pnx8550)"); + pr_debug ("block sizes: ed %d td %d\n", + sizeof (struct ed), sizeof (struct td)); + + return platform_driver_register(&ohci_hcd_pnx8550_driver); +} + +static void __exit ohci_hcd_pnx8550_cleanup (void) +{ + platform_driver_unregister(&ohci_hcd_pnx8550_driver); +} + +module_init (ohci_hcd_pnx8550_init); +module_exit (ohci_hcd_pnx8550_cleanup);