From: Bruno Randolf Date: Tue, 21 Dec 2010 08:30:32 +0000 (+0900) Subject: ath5k: Track current TX power separately from max TX power X-Git-Tag: firefly_0821_release~7613^2~3122^2~14^2~3^2~65 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=51f00622e5664ae77fd6c8670ddd402d9b77ccc8;p=firefly-linux-kernel-4.4.55.git ath5k: Track current TX power separately from max TX power Add a new variable to keep track of the currently configured tx power. Before max_pwr was re-used for keeping the maximum allowed power as well as the current configuration. Doing a min() on it allows you to lower the txpower, but how would you be able to make it higher again? This patch fixes that by adding a new variable ah_cur_pwr which is used instead of txp_max_pwr to keep the current configuration. txp_max_pwr is used to check if we are within the limits. Another problem fixed by this patch is that it avoids setting a zero txpower when things are initialized first and the current power is not yet set. Signed-off-by: Bruno Randolf Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index e6491bf359c0..342da280c987 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1107,6 +1107,7 @@ struct ath5k_hw { /* Values in 0.25dB units */ s16 txp_min_pwr; s16 txp_max_pwr; + s16 txp_cur_pwr; /* Values in 0.5dB units */ s16 txp_offset; s16 txp_ofdm; diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 6f0cf3a09b2c..18c58cdfde46 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -3096,7 +3096,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, /* Min/max in 0.25dB units */ ah->ah_txpower.txp_min_pwr = 2 * rates[7]; - ah->ah_txpower.txp_max_pwr = 2 * rates[0]; + ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; ah->ah_txpower.txp_ofdm = rates[7]; } @@ -3150,8 +3150,6 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* Reset TX power values */ memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; - ah->ah_txpower.txp_min_pwr = 0; - ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER; /* Calculate the powertable */ ret = ath5k_setup_channel_powertable(ah, channel, @@ -3290,7 +3288,8 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, * properly set curve indices. */ ret = ath5k_hw_txpower(ah, channel, ee_mode, - ah->ah_txpower.txp_max_pwr / 2); + ah->ah_txpower.txp_cur_pwr ? + ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER); if (ret) return ret;