From: Florian Schilhabel Date: Thu, 15 Jul 2010 17:04:46 +0000 (+0200) Subject: staging: rtl8192su: merge changes in rtl819x_HTProc.c; still incomplete X-Git-Tag: firefly_0821_release~9833^2~1255^2~1^2~125 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=53faa56b78f1929d3e9d339b8c21541bd355b4eb;p=firefly-linux-kernel-4.4.55.git staging: rtl8192su: merge changes in rtl819x_HTProc.c; still incomplete Signed-off-by: Florian Schilhabel Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c index 84858db18d05..cfd9a1a5b38d 100644 --- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c +++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c @@ -1,4 +1,3 @@ - /****************************************************************************** * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * @@ -25,25 +24,25 @@ u8 MCS_FILTER_1SS[16] = {0xff, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0 u16 MCS_DATA_RATE[2][2][77] = { { {13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78 ,104, 156, 208, 234, 260, - 39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520, + 39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520, 0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195, - 195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260, - 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, // Long GI, 20MHz - {14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289, - 43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578, - 0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217, - 217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289, - 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, // Short GI, 20MHz - { {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, - 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080, - 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405, - 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540, - 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz - {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, - 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200, - 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450, - 450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600, - 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz + 195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260, + 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, + {14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289, + 43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578, + 0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217, + 217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289, + 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, + { {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, + 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080, + 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405, + 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540, + 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, + {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, + 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200, + 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450, + 450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600, + 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } }; static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf}; @@ -70,10 +69,7 @@ static u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4}; void HTUpdateDefaultSetting(struct ieee80211_device* ieee) { PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; - //const typeof( ((struct ieee80211_device *)0)->pHTInfo ) *__mptr = &pHTInfo; - //printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p, offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo)); - //printk("===>ieee:%p,\n", ieee); // ShortGI support pHTInfo->bRegShortGI20MHz= 1; pHTInfo->bRegShortGI40MHz= 1; @@ -306,7 +302,6 @@ u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate) * *****************************************************************************************************************/ u16 TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate) { - //PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; u16 CCKOFDMRate[12] = {0x02 , 0x04 , 0x0b , 0x16 , 0x0c , 0x12 , 0x18 , 0x24 , 0x30 , 0x48 , 0x60 , 0x6c}; u8 is40MHz = 0; u8 isShortGI = 0; @@ -322,28 +317,24 @@ u16 TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate) is40MHz = 0; isShortGI = 0; - // nDataRate = nDataRate - 12; } else if(nDataRate >=0x20 && nDataRate <= 0x2f ) //(27, 44) { is40MHz = 1; isShortGI = 0; - //nDataRate = nDataRate - 28; } else if(nDataRate >= 0x30 && nDataRate <= 0x3f ) //(43, 60) { is40MHz = 0; isShortGI = 1; - //nDataRate = nDataRate - 44; } else if(nDataRate >= 0x40 && nDataRate <= 0x4f ) //(59, 76) { is40MHz = 1; isShortGI = 1; - //nDataRate = nDataRate - 60; } return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate&0xf]; } @@ -393,6 +384,9 @@ void HTIOTPeerDetermine(struct ieee80211_device* ieee) if(net->bssht.RT2RT_HT_Mode & RT_HT_CAP_USE_92SE){ pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK_92SE; } + if(net->bssht.RT2RT_HT_Mode & RT_HT_CAP_USE_SOFTAP){ + pHTInfo->IOTPeer = HT_IOT_PEER_92U_SOFTAP; + } } else if(net->broadcom_cap_exist) pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM; @@ -452,25 +446,6 @@ u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr) bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee) { bool retValue = false; - -#ifdef TODO - // Apply for 819u only -#if (HAL_CODE_BASE==RTL8192) - -#if (DEV_BUS_TYPE == USB_INTERFACE) - // Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15 - retValue = true; -#elif (DEV_BUS_TYPE == PCI_INTERFACE) - // Enable MCS15 if the peer is Cisco AP. by Emily, 2008.05.12 -// if(pBssDesc->bCiscoCapExist) -// retValue = false; -// else - retValue = false; -#endif -#endif -#endif - // Jerry Chang suggest that 8190 1x2 does not need to disable MCS15 - return retValue; } @@ -637,17 +612,11 @@ HTIOCActRejcectADDBARequest(struct ieee80211_network *network) HTIOTActIsEDCABiasRx(struct ieee80211_device* ieee,struct ieee80211_network *network) { u8 retValue = 0; - //if(IS_HARDWARE_TYPE_8192SU(Adapter)) PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; { -//#if UNDER_VISTA -// if(pBssDesc->Vender==HT_IOT_PEER_ATHEROS || -// pBssDesc->Vender==HT_IOT_PEER_RALINK) -//#else if(pHTInfo->IOTPeer==HT_IOT_PEER_ATHEROS || pHTInfo->IOTPeer==HT_IOT_PEER_BROADCOM || pHTInfo->IOTPeer==HT_IOT_PEER_RALINK) -//#endif return 1; } @@ -662,7 +631,6 @@ HTIOTActDisableShortGI(struct ieee80211_device* ieee,struct ieee80211_network *n if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK) { - if(network->bssht.bdHT1R) retValue = 1; } @@ -675,9 +643,10 @@ HTIOTActDisableHighPower(struct ieee80211_device* ieee,struct ieee80211_network u8 retValue = 0; PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; - if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK) + if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK || + pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK || + pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK_92SE) { - if(network->bssht.bdHT1R) retValue = 1; } @@ -731,8 +700,7 @@ HTIOTActIsTxNoAggregation(struct ieee80211_device* ieee,struct ieee80211_network (KEY_TYPE_WEP40 == ieee->group_key_type) || (KEY_TYPE_TKIP == ieee->pairwise_key_type) ) { - if(pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK || - pHTInfo->IOTPeer==HT_IOT_PEER_UNKNOWN) + if(pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK) retValue = 1; } @@ -797,7 +765,6 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u { PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo; PHT_CAPABILITY_ELE pCapELE = NULL; - //u8 bIsDeclareMCS13; if ((posHTCap == NULL) || (pHT == NULL)) { @@ -827,13 +794,11 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0); } -// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0); pCapELE->MimoPwrSave = pHT->SelfMimoPs; pCapELE->GreenField = 0; // This feature is not supported now!! pCapELE->ShortGI20Mhz = 1; // We can receive Short GI!! pCapELE->ShortGI40Mhz = 1; // We can receive Short GI!! - //DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r", - //pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz); + pCapELE->TxSTBC = 1; pCapELE->RxSTBC = 0; pCapELE->DelayBA = 0; // Do not support now!! @@ -893,12 +858,6 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u else *len = 26 + 2; - - -// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2); - - //Print each field in detail. Driver should not print out this message by default -// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()"); return; } @@ -952,8 +911,6 @@ void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* le //STA should not generate High Throughput Information Element *len = 0; } - //IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTInfo, *len - 2); - //HTDebugHTInfo(posHTInfo, "HTConstructInforElement"); return; } @@ -1019,7 +976,6 @@ void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, */ #else - // Do Nothing #endif posRT2RTAgg->Length = 6; @@ -1202,12 +1158,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee) return; } IEEE80211_DEBUG(IEEE80211_DL_HT, "===> HTOnAssocRsp_wq(): HT_ENABLE\n"); -// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTCapBuf, sizeof(HT_CAPABILITY_ELE)); -// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTInfoBuf, sizeof(HT_INFORMATION_ELE)); -// HTDebugHTCapability(pHTInfo->PeerHTCapBuf,"HTOnAssocRsp_wq"); -// HTDebugHTInfo(pHTInfo->PeerHTInfoBuf,"HTOnAssocRsp_wq"); - // if(!memcmp(pHTInfo->PeerHTCapBuf,EWC11NHTCap, sizeof(EWC11NHTCap))) pPeerHTCap = (PHT_CAPABILITY_ELE)(&pHTInfo->PeerHTCapBuf[4]); else @@ -1223,12 +1174,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee) // Configurations: //////////////////////////////////////////////////////// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTCap, sizeof(HT_CAPABILITY_ELE)); -// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE)); - // Config Supported Channel Width setting - // + HTSetConnectBwMode(ieee, (HT_CHANNEL_WIDTH)(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET)(pPeerHTInfo->ExtChlOffset)); -// if(pHTInfo->bCurBW40MHz == true) + if(pHTInfo->bCurBW40MHz == true) pHTInfo->bCurTxBW40MHz = ((pPeerHTInfo->RecommemdedTxWidth == 1)?true:false); // @@ -1309,7 +1258,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee) // <2> Set AMPDU Minimum MPDU Start Spacing // 802.11n 3.0 section 9.7d.3 -#if 1 +#if 0 if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity) pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density; else