From: Zebediah C. McClure Date: Tue, 24 Mar 2009 01:07:40 +0000 (-0700) Subject: [OMAP850] Changes to base IO subsystem, v2 X-Git-Tag: firefly_0821_release~15211^2~9^2~24 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=56739a692946d4c2630cf287646ccaa67c828f47;p=firefly-linux-kernel-4.4.55.git [OMAP850] Changes to base IO subsystem, v2 Changes to base IO subsystem. Signed-off-by: Zebediah C. McClure Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 4c3e582f3d3c..3afe540149f7 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -52,6 +52,22 @@ static struct map_desc omap730_io_desc[] __initdata = { }; #endif +#ifdef CONFIG_ARCH_OMAP850 +static struct map_desc omap850_io_desc[] __initdata = { + { + .virtual = OMAP850_DSP_BASE, + .pfn = __phys_to_pfn(OMAP850_DSP_START), + .length = OMAP850_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP850_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP850_DSPREG_START), + .length = OMAP850_DSPREG_SIZE, + .type = MT_DEVICE + } +}; +#endif + #ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { @@ -109,6 +125,13 @@ void __init omap1_map_common_io(void) iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); } #endif + +#ifdef CONFIG_ARCH_OMAP850 + if (cpu_is_omap850()) { + iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); + } +#endif + #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 062c905c2ba6..721e0d9d8b1d 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -58,6 +58,25 @@ MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) #define OMAP730_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP730 */ +#ifdef CONFIG_ARCH_OMAP850 +struct pin_config __initdata_or_module omap850_pins[] = { +MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) +}; +#endif + #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { /* @@ -419,6 +438,11 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pull_name, cfg->pull_reg, pull_orig, pull); } + +#ifdef CONFIG_ARCH_OMAP850 + omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); +#endif + #endif #ifdef CONFIG_OMAP_MUX_ERRORS diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 0002084e0655..842090b148f1 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -121,6 +121,13 @@ void __init omap_serial_init(void) serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; } + if (cpu_is_omap850()) { + serial_platform_data[0].regshift = 0; + serial_platform_data[1].regshift = 0; + serial_platform_data[0].irq = INT_850_UART_MODEM_1; + serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; + } + if (cpu_is_omap15xx()) { serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index f856a90b264e..d3fa41e3d8c5 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -80,6 +80,22 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 +/* + * OMAP850 specific GPIO registers + */ +#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000) +#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800) +#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000) +#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800) +#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000) +#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800) +#define OMAP850_GPIO_DATA_INPUT 0x00 +#define OMAP850_GPIO_DATA_OUTPUT 0x04 +#define OMAP850_GPIO_DIR_CONTROL 0x08 +#define OMAP850_GPIO_INT_CONTROL 0x0c +#define OMAP850_GPIO_INT_MASK 0x10 +#define OMAP850_GPIO_INT_STATUS 0x14 + /* * omap24xx specific GPIO registers */ @@ -159,7 +175,8 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 -#define METHOD_GPIO_24XX 4 +#define METHOD_GPIO_850 4 +#define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { @@ -190,6 +207,19 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif +#ifdef CONFIG_ARCH_OMAP850 +static struct gpio_bank gpio_bank_850[7] = { + { OMAP_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, + { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, + { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, + { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, + { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, + { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, +}; +#endif + + #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { @@ -236,7 +266,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 4)]; } - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 5)]; @@ -251,7 +281,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) static inline int get_gpio_index(int gpio) { - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) return gpio & 0x1f; if (cpu_is_omap24xx()) return gpio & 0x1f; @@ -273,7 +303,7 @@ static inline int gpio_valid(int gpio) return 0; if ((cpu_is_omap16xx()) && gpio < 64) return 0; - if (cpu_is_omap730() && gpio < 192) + if (cpu_is_omap7xx() && gpio < 192) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; @@ -318,6 +348,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP730_GPIO_DIR_CONTROL; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -380,6 +415,16 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_OUTPUT; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -426,6 +471,11 @@ static int __omap_get_gpio_datain(int gpio) reg += OMAP730_GPIO_DATA_INPUT; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_INPUT; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; @@ -598,6 +648,18 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_CONTROL; + l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); @@ -678,6 +740,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP730_GPIO_INT_STATUS; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_STATUS; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; @@ -736,6 +803,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_MASK; + mask = 0xffffffff; + inv = 1; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; @@ -799,6 +873,16 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_MASK; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -983,6 +1067,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif +#ifdef CONFIG_ARCH_OMAP850 + if (bank->method == METHOD_GPIO_850) + isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; @@ -1372,6 +1460,13 @@ static int __init _omap_gpio_init(void) gpio_bank = gpio_bank_730; } #endif +#ifdef CONFIG_ARCH_OMAP850 + if (cpu_is_omap850()) { + printk(KERN_INFO "OMAP850 GPIO hardware\n"); + gpio_bank_count = 7; + gpio_bank = gpio_bank_850; + } +#endif #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { @@ -1420,7 +1515,7 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) { + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); @@ -1743,6 +1838,9 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -1762,7 +1860,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730()) + else if (cpu_class_is_omap2() || cpu_is_omap730() || + cpu_is_omap850()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 8d9dfe314387..2b22a8799bc6 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -31,7 +31,8 @@ #define OMAP_MPUIO_BASE 0xfffb5000 -#ifdef CONFIG_ARCH_OMAP730 +#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)) + #define OMAP_MPUIO_INPUT_LATCH 0x00 #define OMAP_MPUIO_OUTPUT 0x02 #define OMAP_MPUIO_IO_CNTL 0x04 diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index f4362b8682c7..6a02f8f4c8bf 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -61,6 +61,16 @@ .pull_bit = bit, \ .pull_val = status, +#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ + .mux_reg = OMAP850_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ + .pull_reg = OMAP850_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + #else #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ @@ -83,6 +93,15 @@ .pull_bit = bit, \ .pull_val = status, +#define MUX_REG_850(reg, mode_offset, mode) \ + .mux_reg = OMAP850_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + #endif /* CONFIG_OMAP_MUX_DEBUG */ #define MUX_CFG(desc, mux_reg, mode_offset, mode, \ @@ -98,7 +117,7 @@ /* - * OMAP730 has a slightly different config for the pin mux. + * OMAP730/850 has a slightly different config for the pin mux. * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register @@ -114,6 +133,17 @@ PU_PD_REG(NA, 0) \ }, +#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ + pull_bit, pull_status, debug_status)\ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG_850(mux_reg, mode_offset, mode) \ + PULL_REG_850(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(NA, 0) \ +}, + + #define MUX_CFG_24XX(desc, reg_offset, mode, \ pull_en, pull_mode, dbg) \ { \ @@ -221,6 +251,26 @@ enum omap730_index { W17_730_USB_VBUSI, }; +enum omap850_index { + /* OMAP 850 keyboard */ + E2_850_KBR0, + J7_850_KBR1, + E1_850_KBR2, + F3_850_KBR3, + D2_850_KBR4, + C2_850_KBC0, + D3_850_KBC1, + E4_850_KBC2, + F4_850_KBC3, + E3_850_KBC4, + + /* USB */ + AA17_850_USB_DM, + W16_850_USB_PU_EN, + W17_850_USB_VBUSI, +}; + + enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0,