From: Lars-Peter Clausen Date: Mon, 17 Sep 2012 12:26:00 +0000 (+0100) Subject: staging:iio:trigger:bfintmr Add output support X-Git-Tag: firefly_0821_release~3680^2~1977^2~161^2~1 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=587a51241c5d74a1e262d34e990f85dc4e5318c5;p=firefly-linux-kernel-4.4.55.git staging:iio:trigger:bfintmr Add output support Some converters require an external signal to start the conversion. This patch adds support to the bfintmr trigger driver to generate such a signal. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c index d9d3dc98885c..52062d786f84 100644 --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c @@ -14,14 +14,18 @@ #include #include +#include #include #include +#include "iio-trig-bfin-timer.h" + struct bfin_timer { unsigned short id, bit; unsigned long irqbit; int irq; + int pin; }; /* @@ -30,22 +34,22 @@ struct bfin_timer { */ static struct bfin_timer iio_bfin_timer_code[MAX_BLACKFIN_GPTIMERS] = { - {TIMER0_id, TIMER0bit, TIMER_STATUS_TIMIL0, IRQ_TIMER0}, - {TIMER1_id, TIMER1bit, TIMER_STATUS_TIMIL1, IRQ_TIMER1}, - {TIMER2_id, TIMER2bit, TIMER_STATUS_TIMIL2, IRQ_TIMER2}, + {TIMER0_id, TIMER0bit, TIMER_STATUS_TIMIL0, IRQ_TIMER0, P_TMR0}, + {TIMER1_id, TIMER1bit, TIMER_STATUS_TIMIL1, IRQ_TIMER1, P_TMR1}, + {TIMER2_id, TIMER2bit, TIMER_STATUS_TIMIL2, IRQ_TIMER2, P_TMR2}, #if (MAX_BLACKFIN_GPTIMERS > 3) - {TIMER3_id, TIMER3bit, TIMER_STATUS_TIMIL3, IRQ_TIMER3}, - {TIMER4_id, TIMER4bit, TIMER_STATUS_TIMIL4, IRQ_TIMER4}, - {TIMER5_id, TIMER5bit, TIMER_STATUS_TIMIL5, IRQ_TIMER5}, - {TIMER6_id, TIMER6bit, TIMER_STATUS_TIMIL6, IRQ_TIMER6}, - {TIMER7_id, TIMER7bit, TIMER_STATUS_TIMIL7, IRQ_TIMER7}, + {TIMER3_id, TIMER3bit, TIMER_STATUS_TIMIL3, IRQ_TIMER3, P_TMR3}, + {TIMER4_id, TIMER4bit, TIMER_STATUS_TIMIL4, IRQ_TIMER4, P_TMR4}, + {TIMER5_id, TIMER5bit, TIMER_STATUS_TIMIL5, IRQ_TIMER5, P_TMR5}, + {TIMER6_id, TIMER6bit, TIMER_STATUS_TIMIL6, IRQ_TIMER6, P_TMR6}, + {TIMER7_id, TIMER7bit, TIMER_STATUS_TIMIL7, IRQ_TIMER7, P_TMR7}, #endif #if (MAX_BLACKFIN_GPTIMERS > 8) - {TIMER8_id, TIMER8bit, TIMER_STATUS_TIMIL8, IRQ_TIMER8}, - {TIMER9_id, TIMER9bit, TIMER_STATUS_TIMIL9, IRQ_TIMER9}, - {TIMER10_id, TIMER10bit, TIMER_STATUS_TIMIL10, IRQ_TIMER10}, + {TIMER8_id, TIMER8bit, TIMER_STATUS_TIMIL8, IRQ_TIMER8, P_TMR8}, + {TIMER9_id, TIMER9bit, TIMER_STATUS_TIMIL9, IRQ_TIMER9, P_TMR9}, + {TIMER10_id, TIMER10bit, TIMER_STATUS_TIMIL10, IRQ_TIMER10, P_TMR10}, #if (MAX_BLACKFIN_GPTIMERS > 11) - {TIMER11_id, TIMER11bit, TIMER_STATUS_TIMIL11, IRQ_TIMER11}, + {TIMER11_id, TIMER11bit, TIMER_STATUS_TIMIL11, IRQ_TIMER11, P_TMR11}, #endif #endif }; @@ -54,6 +58,8 @@ struct bfin_tmr_state { struct iio_trigger *trig; struct bfin_timer *t; unsigned timer_num; + bool output_enable; + unsigned int duty; int irq; }; @@ -77,7 +83,7 @@ static ssize_t iio_bfin_tmr_frequency_store(struct device *dev, { struct iio_trigger *trig = to_iio_trigger(dev); struct bfin_tmr_state *st = trig->private_data; - long val; + unsigned long val; bool enabled; int ret; @@ -99,13 +105,13 @@ static ssize_t iio_bfin_tmr_frequency_store(struct device *dev, goto error_ret; val = get_sclk() / val; - if (val <= 4) { + if (val <= 4 || val <= st->duty) { ret = -EINVAL; goto error_ret; } set_gptimer_period(st->t->id, val); - set_gptimer_pwidth(st->t->id, 1); + set_gptimer_pwidth(st->t->id, val - st->duty); if (enabled) enable_gptimers(st->t->bit); @@ -176,7 +182,9 @@ static const struct iio_trigger_ops iio_bfin_tmr_trigger_ops = { static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev) { + struct iio_bfin_timer_trigger_pdata *pdata = pdev->dev.platform_data; struct bfin_tmr_state *st; + unsigned int config; int ret; st = kzalloc(sizeof(*st), GFP_KERNEL); @@ -220,13 +228,43 @@ static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev) goto out4; } - set_gptimer_config(st->t->id, OUT_DIS | PWM_OUT | PERIOD_CNT | IRQ_ENA); + config = PWM_OUT | PERIOD_CNT | IRQ_ENA; + + if (pdata && pdata->output_enable) { + unsigned long long val; + + st->output_enable = true; + + ret = peripheral_request(st->t->pin, st->trig->name); + if (ret) + goto out_free_irq; + + val = (unsigned long long)get_sclk() * pdata->duty_ns; + do_div(val, NSEC_PER_SEC); + st->duty = val; + + /** + * The interrupt will be generated at the end of the period, + * since we want the interrupt to be generated at end of the + * pulse we invert both polarity and duty cycle, so that the + * pulse will be generated directly before the interrupt. + */ + if (pdata->active_low) + config |= PULSE_HI; + } else { + st->duty = 1; + config |= OUT_DIS; + } + + set_gptimer_config(st->t->id, config); dev_info(&pdev->dev, "iio trigger Blackfin TMR%d, IRQ-%d", st->timer_num, st->irq); platform_set_drvdata(pdev, st); return 0; +out_free_irq: + free_irq(st->irq, st); out4: iio_trigger_unregister(st->trig); out2: @@ -242,6 +280,8 @@ static int __devexit iio_bfin_tmr_trigger_remove(struct platform_device *pdev) struct bfin_tmr_state *st = platform_get_drvdata(pdev); disable_gptimers(st->t->bit); + if (st->output_enable) + peripheral_free(st->t->pin); free_irq(st->irq, st); iio_trigger_unregister(st->trig); iio_trigger_put(st->trig); diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.h b/drivers/staging/iio/trigger/iio-trig-bfin-timer.h new file mode 100644 index 000000000000..c07321f8d94c --- /dev/null +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.h @@ -0,0 +1,24 @@ +#ifndef __IIO_BFIN_TIMER_TRIGGER_H__ +#define __IIO_BFIN_TIMER_TRIGGER_H__ + +/** + * struct iio_bfin_timer_trigger_pdata - timer trigger platform data + * @output_enable: Enable external trigger pulse generation. + * @active_low: Whether the trigger pulse is active low. + * @duty_ns: Length of the trigger pulse in nanoseconds. + * + * This struct is used to configure the output pulse generation of the blackfin + * timer trigger. If output_enable is set to true an external trigger signal + * will generated on the pin corresponding to the timer. This is useful for + * converters which needs an external signal to start conversion. active_low and + * duty_ns are used to configure the type of the trigger pulse. If output_enable + * is set to false no external trigger pulse will be generated and active_low + * and duty_ns are ignored. + **/ +struct iio_bfin_timer_trigger_pdata { + bool output_enable; + bool active_low; + unsigned int duty_ns; +}; + +#endif