From: H Hartley Sweeten Date: Tue, 4 Mar 2014 18:30:20 +0000 (-0700) Subject: staging: comedi: pcl818: define the mode register bits X-Git-Tag: firefly_0821_release~176^2~4193^2~623 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=5af366ffad65425b6b89b76c2c26e0100af07d1d;p=firefly-linux-kernel-4.4.55.git staging: comedi: pcl818: define the mode register bits Define the bits in the register to remove the magic values. Tidy up pcl818_ai_cancel(). The 0x73 mask of the value read from the control register will disable dma and interrupts but it does not change the trigger mode. So the software trigger following it might not work. Just disable the trigger and clear any pending end-of-conversion. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c index b23457c5a881..d07d3606a02d 100644 --- a/drivers/staging/comedi/drivers/pcl818.c +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -119,8 +119,6 @@ A word or two about DMA. Driver support DMA operations at two ways: #define boardPCL818 4 #define boardPCL718 5 -/* R/W: operation control register */ -#define PCL818_CONTROL 9 /* W: counter enable */ #define PCL818_CNTENABLE 10 @@ -138,6 +136,14 @@ A word or two about DMA. Driver support DMA operations at two ways: #define PCL818_STATUS_MUX (1 << 5) #define PCL818_STATUS_UNI (1 << 6) #define PCL818_STATUS_EOC (1 << 7) +#define PCL818_CTRL_REG 0x09 +#define PCL818_CTRL_DISABLE_TRIG (0 << 0) +#define PCL818_CTRL_SOFT_TRIG (1 << 0) +#define PCL818_CTRL_EXT_TRIG (2 << 0) +#define PCL818_CTRL_PACER_TRIG (3 << 0) +#define PCL818_CTRL_DMAE (1 << 2) +#define PCL818_CTRL_IRQ(x) ((x) << 4) +#define PCL818_CTRL_INTE (1 << 7) #define PCL818_DO_DI_MSB_REG 0x0b #define PCL818_TIMER_BASE 0x0c @@ -674,12 +680,17 @@ static irqreturn_t pcl818_interrupt(int irq, void *d) static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev, struct comedi_subdevice *s) { + unsigned int ctrl = 0; + pcl818_ai_setup_dma(dev, s); - if (mode == 1) /* Pacer+IRQ+DMA */ - outb(0x87 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); - else /* Ext trig+IRQ+DMA */ - outb(0x86 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); + ctrl |= PCL818_CTRL_INTE | PCL818_CTRL_IRQ(dev->irq) | PCL818_CTRL_DMAE; + if (mode == 1) + ctrl |= PCL818_CTRL_PACER_TRIG; + else + ctrl |= PCL818_CTRL_EXT_TRIG; + + outb(ctrl, dev->iobase + PCL818_CTRL_REG); } static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev, @@ -687,6 +698,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev, { struct pcl818_private *devpriv = dev->private; struct comedi_cmd *cmd = &s->async->cmd; + unsigned int ctrl = 0; unsigned int seglen; if (devpriv->ai_cmd_running) @@ -717,22 +729,20 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev, break; case 0: if (!devpriv->usefifo) { - /* IRQ */ - if (mode == 1) /* Pacer+IRQ */ - outb(0x83 | (dev->irq << 4), - dev->iobase + PCL818_CONTROL); - else /* Ext trig+IRQ */ - outb(0x82 | (dev->irq << 4), - dev->iobase + PCL818_CONTROL); + ctrl |= PCL818_CTRL_INTE | PCL818_CTRL_IRQ(dev->irq); + if (mode == 1) + ctrl |= PCL818_CTRL_PACER_TRIG; + else + ctrl |= PCL818_CTRL_EXT_TRIG; } else { - /* FIFO */ /* enable FIFO */ outb(1, dev->iobase + PCL818_FI_ENABLE); - if (mode == 1) /* Pacer */ - outb(0x03, dev->iobase + PCL818_CONTROL); - else /* Ext trig */ - outb(0x02, dev->iobase + PCL818_CONTROL); + if (mode == 1) + ctrl |= PCL818_CTRL_PACER_TRIG; + else + ctrl |= PCL818_CTRL_EXT_TRIG; } + outb(ctrl, dev->iobase + PCL818_CTRL_REG); } pcl818_start_pacer(dev, mode == 1); @@ -925,13 +935,8 @@ static int pcl818_ai_cancel(struct comedi_device *dev, disable_dma(devpriv->dma); } - outb(inb(dev->iobase + PCL818_CONTROL) & 0x73, - dev->iobase + PCL818_CONTROL); /* Stop A/D */ - udelay(1); + outb(PCL818_CTRL_DISABLE_TRIG, dev->iobase + PCL818_CTRL_REG); pcl818_start_pacer(dev, false); - pcl818_ai_soft_trig(dev); - pcl818_ai_get_sample(dev, s, NULL); - outb(0, dev->iobase + PCL818_CONTROL); /* Stop A/D */ pcl818_ai_clear_eoc(dev); if (devpriv->usefifo) { /* FIFO shutdown */ @@ -955,8 +960,7 @@ static int pcl818_ai_insn_read(struct comedi_device *dev, int ret = 0; int i; - /* software trigger, DMA and INT off */ - outb(0, dev->iobase + PCL818_CONTROL); + outb(PCL818_CTRL_SOFT_TRIG, dev->iobase + PCL818_CTRL_REG); pcl818_ai_set_chan_range(dev, chan, range); pcl818_ai_set_chan_scan(dev, chan, chan); @@ -1055,7 +1059,7 @@ static void pcl818_reset(struct comedi_device *dev) outb(0, dev->iobase + PCL818_DO_DI_MSB_REG); outb(0, dev->iobase + PCL818_DO_DI_LSB_REG); udelay(1); - outb(0, dev->iobase + PCL818_CONTROL); + outb(PCL818_CTRL_DISABLE_TRIG, dev->iobase + PCL818_CTRL_REG); outb(0, dev->iobase + PCL818_CNTENABLE); outb(0, dev->iobase + PCL818_MUX_REG); pcl818_ai_clear_eoc(dev);