From: Stefan Richter Date: Sat, 26 Dec 2009 00:36:53 +0000 (+0100) Subject: firewire, ieee1394: update Kconfig help X-Git-Tag: firefly_0821_release~9833^2~1655^2~46 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=5d7db0499e5bb13381a7fbfdd0d913b966545e75;p=firefly-linux-kernel-4.4.55.git firewire, ieee1394: update Kconfig help Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter --- diff --git a/drivers/Kconfig b/drivers/Kconfig index 8a07363417ed..368ae6d3a096 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -28,7 +28,7 @@ source "drivers/md/Kconfig" source "drivers/message/fusion/Kconfig" -source "drivers/ieee1394/Kconfig" +source "drivers/firewire/Kconfig" source "drivers/message/i2o/Kconfig" diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 13efcd362072..a9371b36a9b9 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,5 +1,10 @@ +menu "IEEE 1394 (FireWire) support" + depends on PCI || BROKEN + # firewire-core does not depend on PCI but is + # not useful without PCI controller driver + comment "You can enable one or both FireWire driver stacks." -comment "See the help texts for more information." +comment "The newer stack is recommended." config FIREWIRE tristate "FireWire driver stack" @@ -15,16 +20,6 @@ config FIREWIRE To compile this driver as a module, say M here: the module will be called firewire-core. - This module functionally replaces ieee1394, raw1394, and video1394. - To access it from application programs, you generally need at least - libraw1394 v2. IIDC/DCAM applications need libdc1394 v2. - No libraries are required to access storage devices through the - firewire-sbp2 driver. - - NOTE: - FireWire audio devices currently require the old drivers (ieee1394, - ohci1394, raw1394). - config FIREWIRE_OHCI tristate "OHCI-1394 controllers" depends on PCI && FIREWIRE @@ -34,22 +29,7 @@ config FIREWIRE_OHCI is the only chipset in use, so say Y here. To compile this driver as a module, say M here: The module will be - called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 - stack. - - NOTE: - If you want to install firewire-ohci and ohci1394 together, you - should configure them only as modules and blacklist the driver(s) - which you don't want to have auto-loaded. Add either - - blacklist firewire-ohci - or - blacklist ohci1394 - blacklist video1394 - blacklist dv1394 - - to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf - depending on your distribution. + called firewire-ohci. config FIREWIRE_OHCI_DEBUG bool @@ -66,8 +46,7 @@ config FIREWIRE_SBP2 like scanners. To compile this driver as a module, say M here: The module will be - called firewire-sbp2. It replaces sbp2 of the classic IEEE 1394 - stack. + called firewire-sbp2. You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. @@ -83,5 +62,8 @@ config FIREWIRE_NET NOTE, this driver is not stable yet! To compile this driver as a module, say M here: The module will be - called firewire-net. It replaces eth1394 of the classic IEEE 1394 - stack. + called firewire-net. + +source "drivers/ieee1394/Kconfig" + +endmenu diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index f102fcc7e52a..e02096cf7d95 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -1,8 +1,3 @@ -menu "IEEE 1394 (FireWire) support" - depends on PCI || BROKEN - -source "drivers/firewire/Kconfig" - config IEEE1394 tristate "Legacy alternative FireWire driver stack" depends on PCI || BROKEN @@ -16,8 +11,13 @@ config IEEE1394 is the core support only, you will also need to select a driver for your IEEE 1394 adapter. - To compile this driver as a module, say M here: the - module will be called ieee1394. + To compile this driver as a module, say M here: the module will be + called ieee1394. + + NOTE: + ieee1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. config IEEE1394_OHCI1394 tristate "OHCI-1394 controllers" @@ -29,19 +29,23 @@ config IEEE1394_OHCI1394 use one of these chipsets. It should work with any OHCI-1394 compliant card, however. - To compile this driver as a module, say M here: the - module will be called ohci1394. + To compile this driver as a module, say M here: the module will be + called ohci1394. NOTE: + ohci1394 is superseded by the newer firewire-ohci driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + If you want to install firewire-ohci and ohci1394 together, you should configure them only as modules and blacklist the driver(s) which you don't want to have auto-loaded. Add either - blacklist firewire-ohci - or blacklist ohci1394 blacklist video1394 blacklist dv1394 + or + blacklist firewire-ohci to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf depending on your distribution. @@ -58,8 +62,8 @@ config IEEE1394_PCILYNX Instruments PCILynx chip. Note: this driver is written for revision 2 of this chip and may not work with revision 0. - To compile this driver as a module, say M here: the - module will be called pcilynx. + To compile this driver as a module, say M here: the module will be + called pcilynx. Only some old and now very rare PCI and CardBus cards and PowerMacs G3 B&W contain the PCILynx controller. Therefore @@ -79,6 +83,14 @@ config IEEE1394_SBP2 You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. + To compile this driver as a module, say M here: the module will be + called sbp2. + + NOTE: + sbp2 is superseded by the newer firewire-sbp2 driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_SBP2_PHYS_DMA bool "Enable replacement for physical DMA in SBP2" depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL @@ -111,6 +123,11 @@ config IEEE1394_ETH1394 The module is called eth1394 although it does not emulate Ethernet. + NOTE: + eth1394 is superseded by the newer firewire-net driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_RAWIO tristate "raw1394 userspace interface" depends on IEEE1394 @@ -123,6 +140,11 @@ config IEEE1394_RAWIO To compile this driver as a module, say M here: the module will be called raw1394. + NOTE: + raw1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_VIDEO1394 tristate "video1394 userspace interface" depends on IEEE1394 && IEEE1394_OHCI1394 @@ -136,13 +158,18 @@ config IEEE1394_VIDEO1394 To compile this driver as a module, say M here: the module will be called video1394. + NOTE: + video1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_DV1394 tristate "dv1394 userspace interface (deprecated)" depends on IEEE1394 && IEEE1394_OHCI1394 help The dv1394 driver is unsupported and may be removed from Linux in a - future release. Its functionality is now provided by raw1394 together - with libraries such as libiec61883. + future release. Its functionality is now provided by either + raw1394 or firewire-core together with libraries such as libiec61883. config IEEE1394_VERBOSEDEBUG bool "Excessive debugging output" @@ -153,5 +180,3 @@ config IEEE1394_VERBOSEDEBUG will quickly result in large amounts of data sent to the system log. Say Y if you really need the debugging output. Everyone else says N. - -endmenu