From: Linus Walleij Date: Thu, 14 Nov 2013 14:21:00 +0000 (+0100) Subject: ARM: ux500: create MCDE node to collect resources X-Git-Tag: firefly_0821_release~176^2~4512^2~6^2~31 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=6e9a88a0e5397e5e7811f5526c9771e799978b56;p=firefly-linux-kernel-4.4.55.git ARM: ux500: create MCDE node to collect resources As we need to connect resources such as pin mappings and clocks when deleting board files, we create a MCDE node even though there is no driver for it. As it is only using standard bindings right now, this does not matter much. When a proper driver is written for the MCDE, it can augment this node with custom properties. Signed-off-by: Linus Walleij --- diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 50ff5ab372d8..e0853ea02df2 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1002,6 +1002,23 @@ status = "disabled"; }; + mcde@a0350000 { + compatible = "stericsson,mcde"; + reg = <0xa0350000 0x1000>, /* MCDE */ + <0xa0351000 0x1000>, /* DSI link 1 */ + <0xa0352000 0x1000>, /* DSI link 2 */ + <0xa0353000 0x1000>; /* DSI link 3 */ + interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ + <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ + <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */ + <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */ + <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */ + <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */ + <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */ + <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */ + }; + cryp@a03cb000 { compatible = "stericsson,ux500-cryp"; reg = <0xa03cb000 0x1000>;