From: Geert Uytterhoeven Date: Tue, 22 Apr 2014 13:11:41 +0000 (+0200) Subject: clk: Fixup spacing in comments X-Git-Tag: firefly_0821_release~176^2~3820^2^2~28^2~24 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=725b418b43d2ddcb94b413cd25c74c1175d1c5f0;p=firefly-linux-kernel-4.4.55.git clk: Fixup spacing in comments - Remove spaces in front of TABs, - Correct indentation for some CLK_* flag descriptions. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mike Turquette --- diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 59e2eb58f555..397f98505bd4 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -40,14 +40,14 @@ struct dentry; * through the clk_* api. * * @prepare: Prepare the clock for enabling. This must not return until - * the clock is fully prepared, and it's safe to call clk_enable. - * This callback is intended to allow clock implementations to - * do any initialisation that may sleep. Called with - * prepare_lock held. + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. * * @unprepare: Release the clock from its prepared state. This will typically - * undo any work done in the @prepare callback. Called with - * prepare_lock held. + * undo any work done in the @prepare callback. Called with + * prepare_lock held. * * @is_prepared: Queries the hardware to determine if the clock is prepared. * This function is allowed to sleep. Optional, if this op is not @@ -58,16 +58,16 @@ struct dentry; * Called with prepare mutex held. This function may sleep. * * @enable: Enable the clock atomically. This must not return until the - * clock is generating a valid clock signal, usable by consumer - * devices. Called with enable_lock held. This function must not - * sleep. + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. * * @disable: Disable the clock atomically. Called with enable_lock held. - * This function must not sleep. + * This function must not sleep. * * @is_enabled: Queries the hardware to determine if the clock is enabled. - * This function must not sleep. Optional, if this op is not - * set then the enable count will be used. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. * * @disable_unused: Disable the clock atomically. Only called from * clk_disable_unused for gate clocks with special needs. @@ -75,34 +75,34 @@ struct dentry; * sleep. * * @recalc_rate Recalculate the rate of this clock, by querying hardware. The - * parent rate is an input parameter. It is up to the caller to - * ensure that the prepare_mutex is held across this call. - * Returns the calculated rate. Optional, but recommended - if - * this op is not set then clock rate will be initialized to 0. + * parent rate is an input parameter. It is up to the caller to + * ensure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. * * @round_rate: Given a target rate as input, returns the closest rate actually - * supported by the clock. + * supported by the clock. * * @determine_rate: Given a target rate as input, returns the closest rate * actually supported by the clock, and optionally the parent clock * that should be used to provide the clock rate. * * @get_parent: Queries the hardware to determine the parent of a clock. The - * return value is a u8 which specifies the index corresponding to - * the parent clock. This index can be applied to either the - * .parent_names or .parents arrays. In short, this function - * translates the parent value read from hardware into an array - * index. Currently only called when the clock is initialized by - * __clk_init. This callback is mandatory for clocks with - * multiple parents. It is optional (and unnecessary) for clocks - * with 0 or 1 parents. + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. * * @set_parent: Change the input source of this clock; for clocks with multiple - * possible parents specify a new parent by passing in the index - * as a u8 corresponding to the parent in either the .parent_names - * or .parents arrays. This function in affect translates an - * array index into the value programmed into the hardware. - * Returns 0 on success, -EERROR otherwise. + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. * * @set_rate: Change the rate of this clock. The requested rate is specified * by the second argument, which should typically be the return @@ -254,12 +254,12 @@ void of_fixed_clk_setup(struct device_node *np); * * Flags: * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to - * enable the clock. Setting this flag does the opposite: setting the bit - * disable the clock and clearing it enables the clock + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit - * of this register, and mask of gate bits are in higher 16-bit of this - * register. While setting the gate bits, higher 16-bit should also be - * updated to indicate changing gate bits. + * of this register, and mask of gate bits are in higher 16-bit of this + * register. While setting the gate bits, higher 16-bit should also be + * updated to indicate changing gate bits. */ struct clk_gate { struct clk_hw hw; @@ -298,20 +298,20 @@ struct clk_div_table { * * Flags: * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the - * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is - * the raw value read from the register, with the value of zero considered + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from - * the hardware register + * the hardware register * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. * Some hardware implementations gracefully handle this case and allow a * zero divisor by not modifying their input clock * (divide by one / bypass). * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit - * of this register, and mask of divider bits are in higher 16-bit of this - * register. While setting the divider bits, higher 16-bit should also be - * updated to indicate changing divider bits. + * of this register, and mask of divider bits are in higher 16-bit of this + * register. While setting the divider bits, higher 16-bit should also be + * updated to indicate changing divider bits. * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded * to the closest integer instead of the up one. */ @@ -359,9 +359,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this - * register, and mask of mux bits are in higher 16-bit of this register. - * While setting the mux bits, higher 16-bit should also be updated to - * indicate changing mux bits. + * register, and mask of mux bits are in higher 16-bit of this register. + * While setting the mux bits, higher 16-bit should also be updated to + * indicate changing mux bits. */ struct clk_mux { struct clk_hw hw;