From: Tony Lindgren Date: Thu, 30 Oct 2014 16:59:27 +0000 (-0700) Subject: net: smc91x: Fix gpios for device tree based booting X-Git-Tag: firefly_0821_release~176^2~2938^2~5 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=7d2911c43815;p=firefly-linux-kernel-4.4.55.git net: smc91x: Fix gpios for device tree based booting With legacy booting, the platform init code was taking care of the configuring of GPIOs. With device tree based booting, things may or may not work depending what bootloader has configured or if the legacy platform code gets called. Let's add support for the pwrdn and reset GPIOs to the smc91x driver to fix the issues of smc91x not working properly when booted in device tree mode. And let's change n900 to use these settings as some versions of the bootloader do not configure things properly causing errors. Reported-by: Kevin Hilman Signed-off-by: Tony Lindgren Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 0f8487b88822..e77e167593db 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -11,3 +11,5 @@ Optional properties: are supported on the device. Valid value for SMSC LAN91c111 are 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning 16-bit access only. +- power-gpios: GPIO to control the PWRDWN pin +- reset-gpios: GPIO to control the RESET pin diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 9b0494a8ab45..286bbf620c77 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -665,6 +665,8 @@ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; + power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ + reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index c95346c94829..cec9d6c6442c 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -252,9 +252,6 @@ static void __init nokia_n900_legacy_init(void) platform_device_register(&omap3_rom_rng_device); } - - /* Only on some development boards */ - gpio_request_one(164, GPIOF_OUT_INIT_LOW, "smc91x reset"); } static void __init omap3_tao3530_legacy_init(void) diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 5e94d00b96b3..2c62208077fe 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -81,6 +81,7 @@ static const char version[] = #include #include #include +#include #include #include @@ -2188,6 +2189,41 @@ static const struct of_device_id smc91x_match[] = { {}, }; MODULE_DEVICE_TABLE(of, smc91x_match); + +/** + * of_try_set_control_gpio - configure a gpio if it exists + */ +static int try_toggle_control_gpio(struct device *dev, + struct gpio_desc **desc, + const char *name, int index, + int value, unsigned int nsdelay) +{ + struct gpio_desc *gpio = *desc; + int res; + + gpio = devm_gpiod_get_index(dev, name, index); + if (IS_ERR(gpio)) { + if (PTR_ERR(gpio) == -ENOENT) { + *desc = NULL; + return 0; + } + + return PTR_ERR(gpio); + } + res = gpiod_direction_output(gpio, !value); + if (res) { + dev_err(dev, "unable to toggle gpio %s: %i\n", name, res); + devm_gpiod_put(dev, gpio); + gpio = NULL; + return res; + } + if (nsdelay) + usleep_range(nsdelay, 2 * nsdelay); + gpiod_set_value_cansleep(gpio, value); + *desc = gpio; + + return 0; +} #endif /* @@ -2237,6 +2273,28 @@ static int smc_drv_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; u32 val; + /* Optional pwrdwn GPIO configured? */ + ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio, + "power", 0, 0, 100); + if (ret) + return ret; + + /* + * Optional reset GPIO configured? Minimum 100 ns reset needed + * according to LAN91C96 datasheet page 14. + */ + ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio, + "reset", 0, 0, 100); + if (ret) + return ret; + + /* + * Need to wait for optional EEPROM to load, max 750 us according + * to LAN91C96 datasheet page 55. + */ + if (lp->reset_gpio) + usleep_range(750, 1000); + /* Combination of IO widths supported, default to 16-bit */ if (!of_property_read_u32(np, "reg-io-width", &val)) { if (val & 1) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 47dce918eb0f..2a38dacbbd27 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -298,6 +298,9 @@ struct smc_local { struct sk_buff *pending_tx_skb; struct tasklet_struct tx_task; + struct gpio_desc *power_gpio; + struct gpio_desc *reset_gpio; + /* version/revision of the SMC91x chip */ int version;