From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 24 Jan 2014 02:56:08 +0000 (-0800)
Subject: Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette...
X-Git-Tag: firefly_0821_release~176^2~4585
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24;p=firefly-linux-kernel-4.4.55.git
Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux
Pull clk framework changes from Mike Turquette:
"The first half of the clk framework pull request is made up almost
entirely of new platform/driver support. There are some conversions
of existing drivers to the common-clock Device Tree binding, and a few
non-critical fixes to the framework.
Due to an entirely unnecessary cyclical dependency with the arm-soc
tree this pull request is broken into two pieces. The second piece
will be sent out after arm-soc sends you the pull request that merged
in core support for the HiSilicon 3620 platform. That same pull
request from arm-soc depends on this pull request to merge in those
HiSilicon bits without causing build failures"
[ Just did the ARM SoC merges, so getting ready for the second clk tree
pull request - Linus ]
* tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits)
devicetree: bindings: Document qcom,mmcc
devicetree: bindings: Document qcom,gcc
clk: qcom: Add support for MSM8660's global clock controller (GCC)
clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)
clk: qcom: Add support for MSM8974's global clock controller (GCC)
clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)
clk: qcom: Add support for MSM8960's global clock controller (GCC)
clk: qcom: Add reset controller support
clk: qcom: Add support for branches/gate clocks
clk: qcom: Add support for root clock generators (RCGs)
clk: qcom: Add support for phase locked loops (PLLs)
clk: qcom: Add a regmap type clock struct
clk: Add set_rate_and_parent() op
reset: Silence warning in reset-controller.h
clk: sirf: re-arch to make the codes support both prima2 and atlas6
clk: composite: pass mux_hw into determine_rate
clk: shmobile: Fix MSTP clock array initialization
clk: shmobile: Fix MSTP clock index
ARM: dts: Add clock provider specific properties to max77686 node
clk: max77686: Register OF clock provider
...
---
7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24
diff --cc arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 9a61494f45f5,000000000000..2c1560d52f1a
mode 100644,000000..100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@@ -1,318 -1,0 +1,319 @@@
+/*
+ * Common device tree include for all Exynos 5250 boards based off of Daisy.
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ aliases {
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ };
+
+ pinctrl@11400000 {
+ /*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+ i2c2_bus: i2c2-bus {
+ samsung,pin-pud = <0>;
+ };
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ i2c@12C60000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
+ reg = <0x09>;
++ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ i2c@12C70000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
+ };
+
+ i2c@12C80000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@12C90000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ };
+
+ i2c@12CA0000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ };
+
+ i2c@12CB0000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ };
+
+ i2c@12CD0000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ };
+
+ i2c@12CE0000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+ };
+
+ mmc@12200000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ mmc@12220000 {
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 0>;
+ };
+ };
+
+ mmc@12230000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ /* See board-specific dts files for pin setup */
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
+ spi_1: spi@12d30000 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+ };
+
+ hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 1>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+};
diff --cc drivers/clk/samsung/clk-exynos4.c
index 3852e44db0f8,2f7e440aebf8..010f071af883
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@@ -498,64 -437,63 +437,64 @@@ static struct samsung_mux_clock exynos4
/* list of divider clocks supported in all exynos4 soc's */
static struct samsung_div_clock exynos4_div_clks[] __initdata = {
- DIV(none, "div_core", "mout_core", DIV_CPU0, 0, 3),
- DIV(none, "div_core2", "div_core", DIV_CPU0, 28, 3),
- DIV(none, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4),
- DIV(none, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4),
- DIV(none, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4),
- DIV(none, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4),
- DIV(none, "div_cam0", "mout_cam0", DIV_CAM, 16, 4),
- DIV(none, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
- DIV(none, "div_csis0", "mout_csis0", DIV_CAM, 24, 4),
- DIV(none, "div_csis1", "mout_csis1", DIV_CAM, 28, 4),
- DIV(sclk_mfc, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4),
- DIV_F(none, "div_g3d", "mout_g3d", DIV_G3D, 0, 4,
+ DIV(0, "div_core", "mout_core", DIV_CPU0, 0, 3),
+ DIV(0, "div_core2", "div_core", DIV_CPU0, 28, 3),
+ DIV(0, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4),
+ DIV(0, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4),
+ DIV(0, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4),
+ DIV(0, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4),
+ DIV(0, "div_cam0", "mout_cam0", DIV_CAM, 16, 4),
+ DIV(0, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+ DIV(0, "div_csis0", "mout_csis0", DIV_CAM, 24, 4),
+ DIV(0, "div_csis1", "mout_csis1", DIV_CAM, 28, 4),
+ DIV(CLK_SCLK_MFC, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4),
+ DIV_F(0, "div_g3d", "mout_g3d", DIV_G3D, 0, 4,
CLK_SET_RATE_PARENT, 0),
- DIV(none, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4),
- DIV(none, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4),
- DIV(none, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4),
- DIV(sclk_pcm0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8),
- DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
- DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
- DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
- DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4),
- DIV(sclk_pixel, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4),
- DIV(aclk100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4),
- DIV(aclk160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3),
- DIV(aclk133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3),
- DIV(none, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3),
- DIV(sclk_slimbus, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4),
- DIV(sclk_pcm1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8),
- DIV(sclk_pcm2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8),
- DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6),
- DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6),
- DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4),
- DIV_F(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8,
+ DIV(0, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4),
+ DIV(0, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4),
+ DIV(0, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4),
+ DIV(CLK_SCLK_PCM0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8),
+ DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+ DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+ DIV(0, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4),
+ DIV(CLK_SCLK_PIXEL, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4),
+ DIV(CLK_ACLK100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4),
+ DIV(CLK_ACLK160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3),
+ DIV(CLK_ACLK133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3),
+ DIV(0, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3),
+ DIV(CLK_SCLK_SLIMBUS, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4),
+ DIV(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8),
+ DIV(CLK_SCLK_PCM2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8),
+ DIV(CLK_SCLK_I2S1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6),
+ DIV(CLK_SCLK_I2S2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6),
+ DIV(0, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4),
- DIV(0, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8),
++ DIV_F(0, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
- DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
- DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
- DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
- DIV(none, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4),
- DIV(none, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4),
- DIV(none, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
- DIV(none, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8),
- DIV(none, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
- DIV(none, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8),
- DIV(none, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4),
- DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8),
- DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4),
- DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4),
- DIV(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3),
- DIV(sclk_apll, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
- DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4,
+ DIV(0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+ DIV(0, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+ DIV(0, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
+ DIV(0, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4),
+ DIV(0, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4),
+ DIV(0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+ DIV(0, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8),
+ DIV(0, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+ DIV(0, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8),
+ DIV(0, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4),
+ DIV(0, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8),
+ DIV(0, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4),
+ DIV(0, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4),
+ DIV(CLK_ARM_CLK, "arm_clk", "div_core2", DIV_CPU0, 28, 3),
+ DIV(CLK_SCLK_APLL, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
+ DIV_F(0, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4,
CLK_SET_RATE_PARENT, 0),
- DIV_F(none, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8,
+ DIV_F(0, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8,
CLK_SET_RATE_PARENT, 0),
- DIV_F(none, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8,
+ DIV_F(0, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8,
CLK_SET_RATE_PARENT, 0),
- DIV_F(none, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8,
+ DIV_F(0, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8,
CLK_SET_RATE_PARENT, 0),
- DIV_F(none, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8,
+ DIV_F(0, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8,
CLK_SET_RATE_PARENT, 0),
};