From: Chaitanya Hazarey Date: Wed, 11 Jun 2014 17:26:43 +0000 (-0700) Subject: Staging: rtl8192u: r8192U_core.c Fixed open brace { placement X-Git-Tag: firefly_0821_release~176^2~3491^2~1901 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=81669597159952928f5fedc83062e7d9fa281ecb;p=firefly-linux-kernel-4.4.55.git Staging: rtl8192u: r8192U_core.c Fixed open brace { placement Fixed open brace placement to address the following code-style errors: ERROR: that open brace { should be on the previous line Signed-off-by: Chaitanya Hazarey Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 9dba99ddd2d4..512bf5cf4063 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -1115,8 +1115,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate); tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur; tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc); - if (tcb_desc->bAMPDUEnable) - {//AMPDU enabled + if (tcb_desc->bAMPDUEnable) {//AMPDU enabled tx_fwinfo->AllowAggregation = 1; /* DWORD 1 */ tx_fwinfo->RxMF = tcb_desc->ampdu_factor; @@ -1331,8 +1330,7 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config) for (i = 0; i < net->rates_len; i++) { basic_rate = net->rates[i]&0x7f; - switch (basic_rate) - { + switch (basic_rate) { case MGN_1M: *rate_config |= RRSR_1M; break; @@ -1371,11 +1369,9 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config) break; } } - for (i = 0; i < net->rates_ex_len; i++) - { + for (i = 0; i < net->rates_ex_len; i++) { basic_rate = net->rates_ex[i]&0x7f; - switch (basic_rate) - { + switch (basic_rate) { case MGN_1M: *rate_config |= RRSR_1M; break; @@ -1498,8 +1494,7 @@ u16 ComputeTxTime(u16 FrameLength, u16 DataRate, u8 bManagementFrame, u16 N_DBPS; u16 Ceiling; - if (rtl8192_IsWirelessBMode(DataRate)) - { + if (rtl8192_IsWirelessBMode(DataRate)) { if (bManagementFrame || !bShortPreamble || DataRate == 10) /* long preamble */ FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10))); else // Short preamble @@ -1671,8 +1666,7 @@ static u8 MRateToHwRate8190Pci(u8 rate) { u8 ret = DESC90_RATE1M; - switch (rate) - { + switch (rate) { case MGN_1M: ret = DESC90_RATE1M; break; @@ -1827,8 +1821,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate); tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur; tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc); - if (tcb_desc->bAMPDUEnable) /* AMPDU enabled */ - { + if (tcb_desc->bAMPDUEnable) { /* AMPDU enabled */ tx_fwinfo->AllowAggregation = 1; /* DWORD 1 */ tx_fwinfo->RxMF = tcb_desc->ampdu_factor; @@ -2314,8 +2307,7 @@ void rtl8192_update_ratr_table(struct net_device *dev) break; case IEEE_N_24G: case IEEE_N_5G: - if (ieee->pHTInfo->PeerMimoPs == 0) /* MIMO_PS_STATIC */ - { + if (ieee->pHTInfo->PeerMimoPs == 0) { /* MIMO_PS_STATIC */ ratr_value &= 0x0007F007; } else { if (priv->rf_type == RF_1T2R) @@ -2699,8 +2691,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) else priv->EEPROM_Def_Ver = 1; RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver); - if (priv->EEPROM_Def_Ver == 0) /* old eeprom definition */ - { + if (priv->EEPROM_Def_Ver == 0) { /* old eeprom definition */ int i; if (bLoad_From_EEPOM) priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8; @@ -3111,15 +3102,13 @@ static bool rtl8192_adapter_start(struct net_device *dev) // #ifdef TO_DO_LIST if (Adapter->ResetProgress == RESET_TYPE_NORESET) { - if (pMgntInfo->RegRfOff == TRUE) /* User disable RF via registry. */ - { + if (pMgntInfo->RegRfOff == TRUE) { /* User disable RF via registry. */ RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n")); MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); // Those actions will be discard in MgntActSet_RF_State because of the same state for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); - } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) /* H/W or S/W RF OFF before sleep. */ - { + } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { /* H/W or S/W RF OFF before sleep. */ RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason)); MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); } else { @@ -3128,8 +3117,7 @@ static bool rtl8192_adapter_start(struct net_device *dev) RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n")); } } else { - if (pHalData->eRFPowerState == eRfOff) - { + if (pHalData->eRFPowerState == eRfOff) { MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); // Those actions will be discard in MgntActSet_RF_State because of the same state for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) @@ -3138,8 +3126,7 @@ static bool rtl8192_adapter_start(struct net_device *dev) } #endif //config RF. - if (priv->ResetProgress == RESET_TYPE_NORESET) - { + if (priv->ResetProgress == RESET_TYPE_NORESET) { rtl8192_phy_RFConfig(dev); RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__); } @@ -3647,8 +3634,7 @@ void rtl819x_watchdog_wqcallback(struct work_struct *work) } if ((priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET && (priv->bForcedSilentReset || - (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) /* This is control by OID set in Pomelo */ - { + (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) { /* This is control by OID set in Pomelo */ RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType); rtl819x_ifsilentreset(dev); } @@ -3928,8 +3914,7 @@ static u8 HwRateToMRate90(bool bIsHT, u8 rate) u8 ret_rate = 0xff; if (!bIsHT) { - switch (rate) - { + switch (rate) { case DESC90_RATE1M: ret_rate = MGN_1M; break; @@ -3974,8 +3959,7 @@ static u8 HwRateToMRate90(bool bIsHT, u8 rate) } } else { - switch (rate) - { + switch (rate) { case DESC90_RATEMCS0: ret_rate = MGN_MCS0; break; @@ -4058,8 +4042,7 @@ static void UpdateRxPktTimeStamp8190(struct net_device *dev, { struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - if (stats->bIsAMPDU && !stats->bFirstMPDU) - { + if (stats->bIsAMPDU && !stats->bFirstMPDU) { stats->mac_time[0] = priv->LastRxDescTSFLow; stats->mac_time[1] = priv->LastRxDescTSFHigh; } else { @@ -4250,10 +4233,8 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, } // <2> Showed on UI for engineering - if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) - { - for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) /* 2 spatial stream */ - { + if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) { + for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) { /* 2 spatial stream */ if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) { if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) /* initialize */ priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream]; @@ -4676,8 +4657,7 @@ UpdateReceivedRateHistogramStatistics8190(struct net_device *dev, else preamble_guardinterval = 0;// long - switch (stats->rate) - { + switch (stats->rate) { // // CCK rate // @@ -5394,8 +5374,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev) ieee->hwsec_active = 1; - if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) /* add hwsec_support flag to totol control hw_sec on/off */ - { + if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) { /* add hwsec_support flag to totol control hw_sec on/off */ ieee->hwsec_active = 0; SECR_value &= ~SCR_RxDecEnable; } @@ -5427,16 +5406,14 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, TargetCommand = i+CAM_CONTENT_COUNT*EntryNo; TargetCommand |= BIT31|BIT16; - if (i == 0) /* MAC|Config */ - { + if (i == 0) { /* MAC|Config */ TargetContent = (u32)(*(MacAddr+0)) << 16| (u32)(*(MacAddr+1)) << 24| (u32)usConfig; write_nic_dword(dev, WCAMI, TargetContent); write_nic_dword(dev, RWCAM, TargetCommand); - } else if (i == 1) /* MAC */ - { + } else if (i == 1) { /* MAC */ TargetContent = (u32)(*(MacAddr+2)) | (u32)(*(MacAddr+3)) << 8| (u32)(*(MacAddr+4)) << 16|