From: H Hartley Sweeten Date: Sat, 8 Sep 2012 00:50:39 +0000 (-0700) Subject: staging: comedi: me4000: remove me4000.h X-Git-Tag: firefly_0821_release~3680^2~1977^2~517 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=81dd181161b88c28d212727120149f959da4bacf;p=firefly-linux-kernel-4.4.55.git staging: comedi: me4000: remove me4000.h Move the remaining defines in this header to the c file. Nothing in the header is needed by any other file. While moving the defines, reorder them so that the bit defines are associated with the register they go with. Also, convert the bit defines to bit shifts to make them a bit clearer. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c index 6247ee3bc6f5..bb724b1baeae 100644 --- a/drivers/staging/comedi/drivers/me4000.c +++ b/drivers/staging/comedi/drivers/me4000.c @@ -53,7 +53,7 @@ broken. #include #include "8253.h" -#include "me4000.h" + #if 0 /* file removed due to GPL incompatibility */ #include "me4000_fw.h" @@ -75,6 +75,144 @@ broken. #define PCI_DEVICE_ID_MEILHAUS_ME4680S 0x4682 #define PCI_DEVICE_ID_MEILHAUS_ME4680IS 0x4683 +/* + * ME4000 Register map and bit defines + */ +#define ME4000_AO_CHAN(x) ((x) * 0x18) + +#define ME4000_AO_CTRL_REG(x) (0x00 + ME4000_AO_CHAN(x)) +#define ME4000_AO_CTRL_BIT_MODE_0 (1 << 0) +#define ME4000_AO_CTRL_BIT_MODE_1 (1 << 1) +#define ME4000_AO_CTRL_MASK_MODE (3 << 0) +#define ME4000_AO_CTRL_BIT_STOP (1 << 2) +#define ME4000_AO_CTRL_BIT_ENABLE_FIFO (1 << 3) +#define ME4000_AO_CTRL_BIT_ENABLE_EX_TRIG (1 << 4) +#define ME4000_AO_CTRL_BIT_EX_TRIG_EDGE (1 << 5) +#define ME4000_AO_CTRL_BIT_IMMEDIATE_STOP (1 << 7) +#define ME4000_AO_CTRL_BIT_ENABLE_DO (1 << 8) +#define ME4000_AO_CTRL_BIT_ENABLE_IRQ (1 << 9) +#define ME4000_AO_CTRL_BIT_RESET_IRQ (1 << 10) +#define ME4000_AO_STATUS_REG(x) (0x04 + ME4000_AO_CHAN(x)) +#define ME4000_AO_STATUS_BIT_FSM (1 << 0) +#define ME4000_AO_STATUS_BIT_FF (1 << 1) +#define ME4000_AO_STATUS_BIT_HF (1 << 2) +#define ME4000_AO_STATUS_BIT_EF (1 << 3) +#define ME4000_AO_FIFO_REG(x) (0x08 + ME4000_AO_CHAN(x)) +#define ME4000_AO_SINGLE_REG(x) (0x0c + ME4000_AO_CHAN(x)) +#define ME4000_AO_TIMER_REG(x) (0x10 + ME4000_AO_CHAN(x)) +#define ME4000_AI_CTRL_REG 0x74 +#define ME4000_AI_STATUS_REG 0x74 +#define ME4000_AI_CTRL_BIT_MODE_0 (1 << 0) +#define ME4000_AI_CTRL_BIT_MODE_1 (1 << 1) +#define ME4000_AI_CTRL_BIT_MODE_2 (1 << 2) +#define ME4000_AI_CTRL_BIT_SAMPLE_HOLD (1 << 3) +#define ME4000_AI_CTRL_BIT_IMMEDIATE_STOP (1 << 4) +#define ME4000_AI_CTRL_BIT_STOP (1 << 5) +#define ME4000_AI_CTRL_BIT_CHANNEL_FIFO (1 << 6) +#define ME4000_AI_CTRL_BIT_DATA_FIFO (1 << 7) +#define ME4000_AI_CTRL_BIT_FULLSCALE (1 << 8) +#define ME4000_AI_CTRL_BIT_OFFSET (1 << 9) +#define ME4000_AI_CTRL_BIT_EX_TRIG_ANALOG (1 << 10) +#define ME4000_AI_CTRL_BIT_EX_TRIG (1 << 11) +#define ME4000_AI_CTRL_BIT_EX_TRIG_FALLING (1 << 12) +#define ME4000_AI_CTRL_BIT_EX_IRQ (1 << 13) +#define ME4000_AI_CTRL_BIT_EX_IRQ_RESET (1 << 14) +#define ME4000_AI_CTRL_BIT_LE_IRQ (1 << 15) +#define ME4000_AI_CTRL_BIT_LE_IRQ_RESET (1 << 16) +#define ME4000_AI_CTRL_BIT_HF_IRQ (1 << 17) +#define ME4000_AI_CTRL_BIT_HF_IRQ_RESET (1 << 18) +#define ME4000_AI_CTRL_BIT_SC_IRQ (1 << 19) +#define ME4000_AI_CTRL_BIT_SC_IRQ_RESET (1 << 20) +#define ME4000_AI_CTRL_BIT_SC_RELOAD (1 << 21) +#define ME4000_AI_STATUS_BIT_EF_CHANNEL (1 << 22) +#define ME4000_AI_STATUS_BIT_HF_CHANNEL (1 << 23) +#define ME4000_AI_STATUS_BIT_FF_CHANNEL (1 << 24) +#define ME4000_AI_STATUS_BIT_EF_DATA (1 << 25) +#define ME4000_AI_STATUS_BIT_HF_DATA (1 << 26) +#define ME4000_AI_STATUS_BIT_FF_DATA (1 << 27) +#define ME4000_AI_STATUS_BIT_LE (1 << 28) +#define ME4000_AI_STATUS_BIT_FSM (1 << 29) +#define ME4000_AI_CTRL_BIT_EX_TRIG_BOTH (1 << 31) +#define ME4000_AI_CHANNEL_LIST_REG 0x78 +#define ME4000_AI_LIST_INPUT_SINGLE_ENDED (0 << 5) +#define ME4000_AI_LIST_INPUT_DIFFERENTIAL (1 << 5) +#define ME4000_AI_LIST_RANGE_BIPOLAR_10 (0 << 6) +#define ME4000_AI_LIST_RANGE_BIPOLAR_2_5 (1 << 6) +#define ME4000_AI_LIST_RANGE_UNIPOLAR_10 (2 << 6) +#define ME4000_AI_LIST_RANGE_UNIPOLAR_2_5 (3 << 6) +#define ME4000_AI_LIST_LAST_ENTRY (1 << 8) +#define ME4000_AI_DATA_REG 0x7c +#define ME4000_AI_CHAN_TIMER_REG 0x80 +#define ME4000_AI_CHAN_PRE_TIMER_REG 0x84 +#define ME4000_AI_SCAN_TIMER_LOW_REG 0x88 +#define ME4000_AI_SCAN_TIMER_HIGH_REG 0x8c +#define ME4000_AI_SCAN_PRE_TIMER_LOW_REG 0x90 +#define ME4000_AI_SCAN_PRE_TIMER_HIGH_REG 0x94 +#define ME4000_AI_START_REG 0x98 +#define ME4000_IRQ_STATUS_REG 0x9c +#define ME4000_IRQ_STATUS_BIT_EX (1 << 0) +#define ME4000_IRQ_STATUS_BIT_LE (1 << 1) +#define ME4000_IRQ_STATUS_BIT_AI_HF (1 << 2) +#define ME4000_IRQ_STATUS_BIT_AO_0_HF (1 << 3) +#define ME4000_IRQ_STATUS_BIT_AO_1_HF (1 << 4) +#define ME4000_IRQ_STATUS_BIT_AO_2_HF (1 << 5) +#define ME4000_IRQ_STATUS_BIT_AO_3_HF (1 << 6) +#define ME4000_IRQ_STATUS_BIT_SC (1 << 7) +#define ME4000_DIO_PORT_0_REG 0xa0 +#define ME4000_DIO_PORT_1_REG 0xa4 +#define ME4000_DIO_PORT_2_REG 0xa8 +#define ME4000_DIO_PORT_3_REG 0xac +#define ME4000_DIO_DIR_REG 0xb0 +#define ME4000_AO_LOADSETREG_XX 0xb4 +#define ME4000_DIO_CTRL_REG 0xb8 +#define ME4000_DIO_CTRL_BIT_MODE_0 (1 << 0) +#define ME4000_DIO_CTRL_BIT_MODE_1 (1 << 1) +#define ME4000_DIO_CTRL_BIT_MODE_2 (1 << 2) +#define ME4000_DIO_CTRL_BIT_MODE_3 (1 << 3) +#define ME4000_DIO_CTRL_BIT_MODE_4 (1 << 4) +#define ME4000_DIO_CTRL_BIT_MODE_5 (1 << 5) +#define ME4000_DIO_CTRL_BIT_MODE_6 (1 << 6) +#define ME4000_DIO_CTRL_BIT_MODE_7 (1 << 7) +#define ME4000_DIO_CTRL_BIT_FUNCTION_0 (1 << 8) +#define ME4000_DIO_CTRL_BIT_FUNCTION_1 (1 << 9) +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_0 (1 << 10) +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_1 (1 << 11) +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_2 (1 << 12) +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_3 (1 << 13) +#define ME4000_AO_DEMUX_ADJUST_REG 0xbc +#define ME4000_AO_DEMUX_ADJUST_VALUE 0x4c +#define ME4000_AI_SAMPLE_COUNTER_REG 0xc0 + +/* + * PLX Register map and bit defines + */ +#define PLX_INTCSR 0x4c +#define PLX_INTCSR_LOCAL_INT1_EN (1 << 0) +#define PLX_INTCSR_LOCAL_INT1_POL (1 << 1) +#define PLX_INTCSR_LOCAL_INT1_STATE (1 << 2) +#define PLX_INTCSR_LOCAL_INT2_EN (1 << 3) +#define PLX_INTCSR_LOCAL_INT2_POL (1 << 4) +#define PLX_INTCSR_LOCAL_INT2_STATE (1 << 5) +#define PLX_INTCSR_PCI_INT_EN (1 << 6) +#define PLX_INTCSR_SOFT_INT (1 << 7) +#define PLX_ICR 0x50 +#define PLX_ICR_BIT_EEPROM_CLOCK_SET (1 << 24) +#define PLX_ICR_BIT_EEPROM_CHIP_SELECT (1 << 25) +#define PLX_ICR_BIT_EEPROM_WRITE (1 << 26) +#define PLX_ICR_BIT_EEPROM_READ (1 << 27) +#define PLX_ICR_BIT_EEPROM_VALID (1 << 28) +#define PLX_ICR_MASK_EEPROM (0x1f << 24) + +#define EEPROM_DELAY 1 + +#define ME4000_AI_FIFO_COUNT 2048 + +#define ME4000_AI_MIN_TICKS 66 +#define ME4000_AI_MIN_SAMPLE_TIME 2000 +#define ME4000_AI_BASE_FREQUENCY (unsigned int) 33E6 + +#define ME4000_AI_CHANNEL_LIST_COUNT 1024 + struct me4000_info { unsigned long plx_regbase; unsigned long timer_regbase; diff --git a/drivers/staging/comedi/drivers/me4000.h b/drivers/staging/comedi/drivers/me4000.h deleted file mode 100644 index 2478933bdad2..000000000000 --- a/drivers/staging/comedi/drivers/me4000.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - me4000.h - Register descriptions and defines for the ME-4000 board family - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 1998-9 David A. Schleef - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -#ifndef _ME4000_H_ -#define _ME4000_H_ - -/*============================================================================= - ME-4000 base register offsets - ===========================================================================*/ - -#define ME4000_AO_CHAN(x) ((x) * 0x18) - -#define ME4000_AO_CTRL_REG(x) (0x00 + ME4000_AO_CHAN(x)) -#define ME4000_AO_STATUS_REG(x) (0x04 + ME4000_AO_CHAN(x)) -#define ME4000_AO_FIFO_REG(x) (0x08 + ME4000_AO_CHAN(x)) -#define ME4000_AO_SINGLE_REG(x) (0x0c + ME4000_AO_CHAN(x)) -#define ME4000_AO_TIMER_REG(x) (0x10 + ME4000_AO_CHAN(x)) - -#define ME4000_AI_CTRL_REG 0x74 /* _/W */ -#define ME4000_AI_STATUS_REG 0x74 /* R/_ */ -#define ME4000_AI_CHANNEL_LIST_REG 0x78 /* _/W */ -#define ME4000_AI_DATA_REG 0x7C /* R/_ */ -#define ME4000_AI_CHAN_TIMER_REG 0x80 /* _/W */ -#define ME4000_AI_CHAN_PRE_TIMER_REG 0x84 /* _/W */ -#define ME4000_AI_SCAN_TIMER_LOW_REG 0x88 /* _/W */ -#define ME4000_AI_SCAN_TIMER_HIGH_REG 0x8C /* _/W */ -#define ME4000_AI_SCAN_PRE_TIMER_LOW_REG 0x90 /* _/W */ -#define ME4000_AI_SCAN_PRE_TIMER_HIGH_REG 0x94 /* _/W */ -#define ME4000_AI_START_REG 0x98 /* R/_ */ - -#define ME4000_IRQ_STATUS_REG 0x9C /* R/_ */ - -#define ME4000_DIO_PORT_0_REG 0xA0 /* R/W */ -#define ME4000_DIO_PORT_1_REG 0xA4 /* R/W */ -#define ME4000_DIO_PORT_2_REG 0xA8 /* R/W */ -#define ME4000_DIO_PORT_3_REG 0xAC /* R/W */ -#define ME4000_DIO_DIR_REG 0xB0 /* R/W */ - -#define ME4000_AO_LOADSETREG_XX 0xB4 /* R/W */ - -#define ME4000_DIO_CTRL_REG 0xB8 /* R/W */ - -#define ME4000_AO_DEMUX_ADJUST_REG 0xBC /* -/W */ - -#define ME4000_AI_SAMPLE_COUNTER_REG 0xC0 /* _/W */ - -/*============================================================================= - Value to adjust Demux - ===========================================================================*/ - -#define ME4000_AO_DEMUX_ADJUST_VALUE 0x4C - -/*============================================================================= - PLX base register offsets - ===========================================================================*/ - -#define PLX_INTCSR 0x4C /* Interrupt control and status register */ -#define PLX_ICR 0x50 /* Initialization control register */ - -/*============================================================================= - Bits for the PLX_ICSR register - ===========================================================================*/ - -#define PLX_INTCSR_LOCAL_INT1_EN 0x01 /* If set, local interrupt 1 is enabled (r/w) */ -#define PLX_INTCSR_LOCAL_INT1_POL 0x02 /* If set, local interrupt 1 polarity is active high (r/w) */ -#define PLX_INTCSR_LOCAL_INT1_STATE 0x04 /* If set, local interrupt 1 is active (r/_) */ -#define PLX_INTCSR_LOCAL_INT2_EN 0x08 /* If set, local interrupt 2 is enabled (r/w) */ -#define PLX_INTCSR_LOCAL_INT2_POL 0x10 /* If set, local interrupt 2 polarity is active high (r/w) */ -#define PLX_INTCSR_LOCAL_INT2_STATE 0x20 /* If set, local interrupt 2 is active (r/_) */ -#define PLX_INTCSR_PCI_INT_EN 0x40 /* If set, PCI interrupt is enabled (r/w) */ -#define PLX_INTCSR_SOFT_INT 0x80 /* If set, a software interrupt is generated (r/w) */ - -/*============================================================================= - Bits for the PLX_ICR register - ===========================================================================*/ - -#define PLX_ICR_BIT_EEPROM_CLOCK_SET 0x01000000 -#define PLX_ICR_BIT_EEPROM_CHIP_SELECT 0x02000000 -#define PLX_ICR_BIT_EEPROM_WRITE 0x04000000 -#define PLX_ICR_BIT_EEPROM_READ 0x08000000 -#define PLX_ICR_BIT_EEPROM_VALID 0x10000000 - -#define PLX_ICR_MASK_EEPROM 0x1F000000 - -#define EEPROM_DELAY 1 - -/*============================================================================= - Bits for the ME4000_AO_CTRL_REG register - ===========================================================================*/ - -#define ME4000_AO_CTRL_BIT_MODE_0 0x001 -#define ME4000_AO_CTRL_BIT_MODE_1 0x002 -#define ME4000_AO_CTRL_MASK_MODE 0x003 -#define ME4000_AO_CTRL_BIT_STOP 0x004 -#define ME4000_AO_CTRL_BIT_ENABLE_FIFO 0x008 -#define ME4000_AO_CTRL_BIT_ENABLE_EX_TRIG 0x010 -#define ME4000_AO_CTRL_BIT_EX_TRIG_EDGE 0x020 -#define ME4000_AO_CTRL_BIT_IMMEDIATE_STOP 0x080 -#define ME4000_AO_CTRL_BIT_ENABLE_DO 0x100 -#define ME4000_AO_CTRL_BIT_ENABLE_IRQ 0x200 -#define ME4000_AO_CTRL_BIT_RESET_IRQ 0x400 - -/*============================================================================= - Bits for the ME4000_AO_STATUS_REG register - ===========================================================================*/ - -#define ME4000_AO_STATUS_BIT_FSM 0x01 -#define ME4000_AO_STATUS_BIT_FF 0x02 -#define ME4000_AO_STATUS_BIT_HF 0x04 -#define ME4000_AO_STATUS_BIT_EF 0x08 - -/*============================================================================= - Bits for the ME4000_AI_CTRL_REG register - ===========================================================================*/ - -#define ME4000_AI_CTRL_BIT_MODE_0 0x00000001 -#define ME4000_AI_CTRL_BIT_MODE_1 0x00000002 -#define ME4000_AI_CTRL_BIT_MODE_2 0x00000004 -#define ME4000_AI_CTRL_BIT_SAMPLE_HOLD 0x00000008 -#define ME4000_AI_CTRL_BIT_IMMEDIATE_STOP 0x00000010 -#define ME4000_AI_CTRL_BIT_STOP 0x00000020 -#define ME4000_AI_CTRL_BIT_CHANNEL_FIFO 0x00000040 -#define ME4000_AI_CTRL_BIT_DATA_FIFO 0x00000080 -#define ME4000_AI_CTRL_BIT_FULLSCALE 0x00000100 -#define ME4000_AI_CTRL_BIT_OFFSET 0x00000200 -#define ME4000_AI_CTRL_BIT_EX_TRIG_ANALOG 0x00000400 -#define ME4000_AI_CTRL_BIT_EX_TRIG 0x00000800 -#define ME4000_AI_CTRL_BIT_EX_TRIG_FALLING 0x00001000 -#define ME4000_AI_CTRL_BIT_EX_IRQ 0x00002000 -#define ME4000_AI_CTRL_BIT_EX_IRQ_RESET 0x00004000 -#define ME4000_AI_CTRL_BIT_LE_IRQ 0x00008000 -#define ME4000_AI_CTRL_BIT_LE_IRQ_RESET 0x00010000 -#define ME4000_AI_CTRL_BIT_HF_IRQ 0x00020000 -#define ME4000_AI_CTRL_BIT_HF_IRQ_RESET 0x00040000 -#define ME4000_AI_CTRL_BIT_SC_IRQ 0x00080000 -#define ME4000_AI_CTRL_BIT_SC_IRQ_RESET 0x00100000 -#define ME4000_AI_CTRL_BIT_SC_RELOAD 0x00200000 -#define ME4000_AI_CTRL_BIT_EX_TRIG_BOTH 0x80000000 - -/*============================================================================= - Bits for the ME4000_AI_STATUS_REG register - ===========================================================================*/ - -#define ME4000_AI_STATUS_BIT_EF_CHANNEL 0x00400000 -#define ME4000_AI_STATUS_BIT_HF_CHANNEL 0x00800000 -#define ME4000_AI_STATUS_BIT_FF_CHANNEL 0x01000000 -#define ME4000_AI_STATUS_BIT_EF_DATA 0x02000000 -#define ME4000_AI_STATUS_BIT_HF_DATA 0x04000000 -#define ME4000_AI_STATUS_BIT_FF_DATA 0x08000000 -#define ME4000_AI_STATUS_BIT_LE 0x10000000 -#define ME4000_AI_STATUS_BIT_FSM 0x20000000 - -/*============================================================================= - Bits for the ME4000_IRQ_STATUS_REG register - ===========================================================================*/ - -#define ME4000_IRQ_STATUS_BIT_EX 0x01 -#define ME4000_IRQ_STATUS_BIT_LE 0x02 -#define ME4000_IRQ_STATUS_BIT_AI_HF 0x04 -#define ME4000_IRQ_STATUS_BIT_AO_0_HF 0x08 -#define ME4000_IRQ_STATUS_BIT_AO_1_HF 0x10 -#define ME4000_IRQ_STATUS_BIT_AO_2_HF 0x20 -#define ME4000_IRQ_STATUS_BIT_AO_3_HF 0x40 -#define ME4000_IRQ_STATUS_BIT_SC 0x80 - -/*============================================================================= - Bits for the ME4000_DIO_CTRL_REG register - ===========================================================================*/ - -#define ME4000_DIO_CTRL_BIT_MODE_0 0x0001 -#define ME4000_DIO_CTRL_BIT_MODE_1 0x0002 -#define ME4000_DIO_CTRL_BIT_MODE_2 0x0004 -#define ME4000_DIO_CTRL_BIT_MODE_3 0x0008 -#define ME4000_DIO_CTRL_BIT_MODE_4 0x0010 -#define ME4000_DIO_CTRL_BIT_MODE_5 0x0020 -#define ME4000_DIO_CTRL_BIT_MODE_6 0x0040 -#define ME4000_DIO_CTRL_BIT_MODE_7 0x0080 - -#define ME4000_DIO_CTRL_BIT_FUNCTION_0 0x0100 -#define ME4000_DIO_CTRL_BIT_FUNCTION_1 0x0200 - -#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_0 0x0400 -#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_1 0x0800 -#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_2 0x1000 -#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_3 0x2000 - -/*----------------------------------------------------------------------------- - Defines for analog input - ----------------------------------------------------------------------------*/ - -/* General stuff */ -#define ME4000_AI_FIFO_COUNT 2048 - -#define ME4000_AI_MIN_TICKS 66 -#define ME4000_AI_MIN_SAMPLE_TIME 2000 /* Minimum sample time [ns] */ -#define ME4000_AI_BASE_FREQUENCY (unsigned int) 33E6 - -/* Channel list defines and masks */ -#define ME4000_AI_CHANNEL_LIST_COUNT 1024 - -#define ME4000_AI_LIST_INPUT_SINGLE_ENDED 0x000 -#define ME4000_AI_LIST_INPUT_DIFFERENTIAL 0x020 - -#define ME4000_AI_LIST_RANGE_BIPOLAR_10 0x000 -#define ME4000_AI_LIST_RANGE_BIPOLAR_2_5 0x040 -#define ME4000_AI_LIST_RANGE_UNIPOLAR_10 0x080 -#define ME4000_AI_LIST_RANGE_UNIPOLAR_2_5 0x0C0 - -#define ME4000_AI_LIST_LAST_ENTRY 0x100 - -#endif