From: Greg Kroah-Hartman Date: Tue, 3 Mar 2009 22:38:09 +0000 (-0800) Subject: Staging: rtl8187se: fix \r\n line ends X-Git-Tag: firefly_0821_release~14777^2~515 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=88adc104476cccb4b5cfaa48da7019cf9184481b;p=firefly-linux-kernel-4.4.55.git Staging: rtl8187se: fix \r\n line ends Andrew pointed out that I forgot to convert some files to unix format when adding them originally. This patch runs dos2unix on the rtl8187se files that needed them. Reported-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8187se/dot11d.h b/drivers/staging/rtl8187se/dot11d.h index 49f53fe52af4..2417da99529f 100644 --- a/drivers/staging/rtl8187se/dot11d.h +++ b/drivers/staging/rtl8187se/dot11d.h @@ -1,101 +1,101 @@ -#ifndef __INC_DOT11D_H -#define __INC_DOT11D_H - -#include "ieee80211.h" - -//#define ENABLE_DOT11D - -//#define DOT11D_MAX_CHNL_NUM 83 - -typedef struct _CHNL_TXPOWER_TRIPLE { - u8 FirstChnl; - u8 NumChnls; - u8 MaxTxPowerInDbm; -}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE; - -typedef enum _DOT11D_STATE { - DOT11D_STATE_NONE = 0, - DOT11D_STATE_LEARNED, - DOT11D_STATE_DONE, -}DOT11D_STATE; - -typedef struct _RT_DOT11D_INFO { - //DECLARE_RT_OBJECT(RT_DOT11D_INFO); - - bool bEnabled; // dot11MultiDomainCapabilityEnabled - - u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element. - u8 CountryIeBuf[MAX_IE_LEN]; - u8 CountryIeSrcAddr[6]; // Source AP of the country IE. - u8 CountryIeWatchdog; - - u8 channel_map[MAX_CHANNEL_NUMBER+1]; //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) - //u8 ChnlListLen; // #Bytes valid in ChnlList[]. - //u8 ChnlList[DOT11D_MAX_CHNL_NUM]; - u8 MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1]; - - DOT11D_STATE State; -}RT_DOT11D_INFO, *PRT_DOT11D_INFO; -#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 ) -#define cpMacAddr(des,src) ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5]) -#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo)) - -#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled -#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0) - -#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) -#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) - -#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \ - (((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \ - FALSE : \ - (!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length))) - -#define CIE_WATCHDOG_TH 1 -#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog -#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 -#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev) - -#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE) - - -void -Dot11d_Init( - struct ieee80211_device *dev - ); - -void -Dot11d_Reset( - struct ieee80211_device *dev - ); - -void -Dot11d_UpdateCountryIe( - struct ieee80211_device *dev, - u8 * pTaddr, - u16 CoutryIeLen, - u8 * pCoutryIe - ); - -u8 -DOT11D_GetMaxTxPwrInDbm( - struct ieee80211_device *dev, - u8 Channel - ); - -void -DOT11D_ScanComplete( - struct ieee80211_device * dev - ); - -int IsLegalChannel( - struct ieee80211_device * dev, - u8 channel -); - -int ToLegalChannel( - struct ieee80211_device * dev, - u8 channel -); - -#endif // #ifndef __INC_DOT11D_H +#ifndef __INC_DOT11D_H +#define __INC_DOT11D_H + +#include "ieee80211.h" + +//#define ENABLE_DOT11D + +//#define DOT11D_MAX_CHNL_NUM 83 + +typedef struct _CHNL_TXPOWER_TRIPLE { + u8 FirstChnl; + u8 NumChnls; + u8 MaxTxPowerInDbm; +}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE; + +typedef enum _DOT11D_STATE { + DOT11D_STATE_NONE = 0, + DOT11D_STATE_LEARNED, + DOT11D_STATE_DONE, +}DOT11D_STATE; + +typedef struct _RT_DOT11D_INFO { + //DECLARE_RT_OBJECT(RT_DOT11D_INFO); + + bool bEnabled; // dot11MultiDomainCapabilityEnabled + + u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element. + u8 CountryIeBuf[MAX_IE_LEN]; + u8 CountryIeSrcAddr[6]; // Source AP of the country IE. + u8 CountryIeWatchdog; + + u8 channel_map[MAX_CHANNEL_NUMBER+1]; //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) + //u8 ChnlListLen; // #Bytes valid in ChnlList[]. + //u8 ChnlList[DOT11D_MAX_CHNL_NUM]; + u8 MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1]; + + DOT11D_STATE State; +}RT_DOT11D_INFO, *PRT_DOT11D_INFO; +#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 ) +#define cpMacAddr(des,src) ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5]) +#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo)) + +#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled +#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0) + +#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) +#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) + +#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \ + (((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \ + FALSE : \ + (!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length))) + +#define CIE_WATCHDOG_TH 1 +#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog +#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 +#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev) + +#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE) + + +void +Dot11d_Init( + struct ieee80211_device *dev + ); + +void +Dot11d_Reset( + struct ieee80211_device *dev + ); + +void +Dot11d_UpdateCountryIe( + struct ieee80211_device *dev, + u8 * pTaddr, + u16 CoutryIeLen, + u8 * pCoutryIe + ); + +u8 +DOT11D_GetMaxTxPwrInDbm( + struct ieee80211_device *dev, + u8 Channel + ); + +void +DOT11D_ScanComplete( + struct ieee80211_device * dev + ); + +int IsLegalChannel( + struct ieee80211_device * dev, + u8 channel +); + +int ToLegalChannel( + struct ieee80211_device * dev, + u8 channel +); + +#endif // #ifndef __INC_DOT11D_H diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c index 5d8b752fc0fb..54bcdcf1d330 100644 --- a/drivers/staging/rtl8187se/ieee80211/dot11d.c +++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c @@ -1,246 +1,246 @@ -#ifdef ENABLE_DOT11D -//----------------------------------------------------------------------------- -// File: -// Dot11d.c -// -// Description: -// Implement 802.11d. -// -//----------------------------------------------------------------------------- - -#include "dot11d.h" - -void -Dot11d_Init(struct ieee80211_device *ieee) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee); - - pDot11dInfo->bEnabled = 0; - - pDot11dInfo->State = DOT11D_STATE_NONE; - pDot11dInfo->CountryIeLen = 0; - memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); - memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); - RESET_CIE_WATCHDOG(ieee); - - printk("Dot11d_Init()\n"); -} - -// -// Description: -// Reset to the state as we are just entering a regulatory domain. -// -void -Dot11d_Reset(struct ieee80211_device *ieee) -{ - u32 i; - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee); - - // Clear old channel map - memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); - memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); - // Set new channel map - for (i=1; i<=11; i++) { - (pDot11dInfo->channel_map)[i] = 1; - } - for (i=12; i<=14; i++) { - (pDot11dInfo->channel_map)[i] = 2; - } - - pDot11dInfo->State = DOT11D_STATE_NONE; - pDot11dInfo->CountryIeLen = 0; - RESET_CIE_WATCHDOG(ieee); - - //printk("Dot11d_Reset()\n"); -} - -// -// Description: -// Update country IE from Beacon or Probe Resopnse -// and configure PHY for operation in the regulatory domain. -// -// TODO: -// Configure Tx power. -// -// Assumption: -// 1. IS_DOT11D_ENABLE() is TRUE. -// 2. Input IE is an valid one. -// -void -Dot11d_UpdateCountryIe( - struct ieee80211_device *dev, - u8 * pTaddr, - u16 CoutryIeLen, - u8 * pCoutryIe - ) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - u8 i, j, NumTriples, MaxChnlNum; - PCHNL_TXPOWER_TRIPLE pTriple; - - if((CoutryIeLen - 3)%3 != 0) - { - printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n"); - Dot11d_Reset(dev); - return; - } - - memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); - memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); - MaxChnlNum = 0; - NumTriples = (CoutryIeLen - 3) / 3; // skip 3-byte country string. - pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3); - for(i = 0; i < NumTriples; i++) - { - if(MaxChnlNum >= pTriple->FirstChnl) - { // It is not in a monotonically increasing order, so stop processing. - printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n"); - Dot11d_Reset(dev); - return; - } - if(MAX_CHANNEL_NUMBER < (pTriple->FirstChnl + pTriple->NumChnls)) - { // It is not a valid set of channel id, so stop processing. - printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n"); - Dot11d_Reset(dev); - return; - } - - for(j = 0 ; j < pTriple->NumChnls; j++) - { - pDot11dInfo->channel_map[pTriple->FirstChnl + j] = 1; - pDot11dInfo->MaxTxPwrDbmList[pTriple->FirstChnl + j] = pTriple->MaxTxPowerInDbm; - MaxChnlNum = pTriple->FirstChnl + j; - } - - pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3); - } -#if 1 - //printk("Dot11d_UpdateCountryIe(): Channel List:\n"); - printk("Channel List:"); - for(i=1; i<= MAX_CHANNEL_NUMBER; i++) - if(pDot11dInfo->channel_map[i] > 0) - printk(" %d", i); - printk("\n"); -#endif - - UPDATE_CIE_SRC(dev, pTaddr); - - pDot11dInfo->CountryIeLen = CoutryIeLen; - memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe,CoutryIeLen); - pDot11dInfo->State = DOT11D_STATE_LEARNED; -} - -void dump_chnl_map(u8 * channel_map) -{ - int i; - printk("Channel List:"); - for(i=1; i<= MAX_CHANNEL_NUMBER; i++) - if(channel_map[i] > 0) - printk(" %d(%d)", i, channel_map[i]); - printk("\n"); -} - -u8 -DOT11D_GetMaxTxPwrInDbm( - struct ieee80211_device *dev, - u8 Channel - ) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - u8 MaxTxPwrInDbm = 255; - - if(MAX_CHANNEL_NUMBER < Channel) - { - printk("DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n"); - return MaxTxPwrInDbm; - } - if(pDot11dInfo->channel_map[Channel]) - { - MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel]; - } - - return MaxTxPwrInDbm; -} - - -void -DOT11D_ScanComplete( - struct ieee80211_device * dev - ) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - - switch(pDot11dInfo->State) - { - case DOT11D_STATE_LEARNED: - pDot11dInfo->State = DOT11D_STATE_DONE; - break; - - case DOT11D_STATE_DONE: - if( GET_CIE_WATCHDOG(dev) == 0 ) - { // Reset country IE if previous one is gone. - Dot11d_Reset(dev); - } - break; - case DOT11D_STATE_NONE: - break; - } -} - -int IsLegalChannel( - struct ieee80211_device * dev, - u8 channel -) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - - if(MAX_CHANNEL_NUMBER < channel) - { - printk("IsLegalChannel(): Invalid Channel\n"); - return 0; - } - if(pDot11dInfo->channel_map[channel] > 0) - return 1; - return 0; -} - -int ToLegalChannel( - struct ieee80211_device * dev, - u8 channel -) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - u8 default_chn = 0; - u32 i = 0; - - for (i=1; i<= MAX_CHANNEL_NUMBER; i++) - { - if(pDot11dInfo->channel_map[i] > 0) - { - default_chn = i; - break; - } - } - - if(MAX_CHANNEL_NUMBER < channel) - { - printk("IsLegalChannel(): Invalid Channel\n"); - return default_chn; - } - - if(pDot11dInfo->channel_map[channel] > 0) - return channel; - - return default_chn; -} - -#if 0 -EXPORT_SYMBOL(Dot11d_Init); -EXPORT_SYMBOL(Dot11d_Reset); -EXPORT_SYMBOL(Dot11d_UpdateCountryIe); -EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm); -EXPORT_SYMBOL(DOT11D_ScanComplete); -EXPORT_SYMBOL(IsLegalChannel); -EXPORT_SYMBOL(ToLegalChannel); -#endif -#endif +#ifdef ENABLE_DOT11D +//----------------------------------------------------------------------------- +// File: +// Dot11d.c +// +// Description: +// Implement 802.11d. +// +//----------------------------------------------------------------------------- + +#include "dot11d.h" + +void +Dot11d_Init(struct ieee80211_device *ieee) +{ + PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee); + + pDot11dInfo->bEnabled = 0; + + pDot11dInfo->State = DOT11D_STATE_NONE; + pDot11dInfo->CountryIeLen = 0; + memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); + memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); + RESET_CIE_WATCHDOG(ieee); + + printk("Dot11d_Init()\n"); +} + +// +// Description: +// Reset to the state as we are just entering a regulatory domain. +// +void +Dot11d_Reset(struct ieee80211_device *ieee) +{ + u32 i; + PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee); + + // Clear old channel map + memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); + memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); + // Set new channel map + for (i=1; i<=11; i++) { + (pDot11dInfo->channel_map)[i] = 1; + } + for (i=12; i<=14; i++) { + (pDot11dInfo->channel_map)[i] = 2; + } + + pDot11dInfo->State = DOT11D_STATE_NONE; + pDot11dInfo->CountryIeLen = 0; + RESET_CIE_WATCHDOG(ieee); + + //printk("Dot11d_Reset()\n"); +} + +// +// Description: +// Update country IE from Beacon or Probe Resopnse +// and configure PHY for operation in the regulatory domain. +// +// TODO: +// Configure Tx power. +// +// Assumption: +// 1. IS_DOT11D_ENABLE() is TRUE. +// 2. Input IE is an valid one. +// +void +Dot11d_UpdateCountryIe( + struct ieee80211_device *dev, + u8 * pTaddr, + u16 CoutryIeLen, + u8 * pCoutryIe + ) +{ + PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); + u8 i, j, NumTriples, MaxChnlNum; + PCHNL_TXPOWER_TRIPLE pTriple; + + if((CoutryIeLen - 3)%3 != 0) + { + printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n"); + Dot11d_Reset(dev); + return; + } + + memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); + memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); + MaxChnlNum = 0; + NumTriples = (CoutryIeLen - 3) / 3; // skip 3-byte country string. + pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3); + for(i = 0; i < NumTriples; i++) + { + if(MaxChnlNum >= pTriple->FirstChnl) + { // It is not in a monotonically increasing order, so stop processing. + printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n"); + Dot11d_Reset(dev); + return; + } + if(MAX_CHANNEL_NUMBER < (pTriple->FirstChnl + pTriple->NumChnls)) + { // It is not a valid set of channel id, so stop processing. + printk("Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n"); + Dot11d_Reset(dev); + return; + } + + for(j = 0 ; j < pTriple->NumChnls; j++) + { + pDot11dInfo->channel_map[pTriple->FirstChnl + j] = 1; + pDot11dInfo->MaxTxPwrDbmList[pTriple->FirstChnl + j] = pTriple->MaxTxPowerInDbm; + MaxChnlNum = pTriple->FirstChnl + j; + } + + pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3); + } +#if 1 + //printk("Dot11d_UpdateCountryIe(): Channel List:\n"); + printk("Channel List:"); + for(i=1; i<= MAX_CHANNEL_NUMBER; i++) + if(pDot11dInfo->channel_map[i] > 0) + printk(" %d", i); + printk("\n"); +#endif + + UPDATE_CIE_SRC(dev, pTaddr); + + pDot11dInfo->CountryIeLen = CoutryIeLen; + memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe,CoutryIeLen); + pDot11dInfo->State = DOT11D_STATE_LEARNED; +} + +void dump_chnl_map(u8 * channel_map) +{ + int i; + printk("Channel List:"); + for(i=1; i<= MAX_CHANNEL_NUMBER; i++) + if(channel_map[i] > 0) + printk(" %d(%d)", i, channel_map[i]); + printk("\n"); +} + +u8 +DOT11D_GetMaxTxPwrInDbm( + struct ieee80211_device *dev, + u8 Channel + ) +{ + PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); + u8 MaxTxPwrInDbm = 255; + + if(MAX_CHANNEL_NUMBER < Channel) + { + printk("DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n"); + return MaxTxPwrInDbm; + } + if(pDot11dInfo->channel_map[Channel]) + { + MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel]; + } + + return MaxTxPwrInDbm; +} + + +void +DOT11D_ScanComplete( + struct ieee80211_device * dev + ) +{ + PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); + + switch(pDot11dInfo->State) + { + case DOT11D_STATE_LEARNED: + pDot11dInfo->State = DOT11D_STATE_DONE; + break; + + case DOT11D_STATE_DONE: + if( GET_CIE_WATCHDOG(dev) == 0 ) + { // Reset country IE if previous one is gone. + Dot11d_Reset(dev); + } + break; + case DOT11D_STATE_NONE: + break; + } +} + +int IsLegalChannel( + struct ieee80211_device * dev, + u8 channel +) +{ + PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); + + if(MAX_CHANNEL_NUMBER < channel) + { + printk("IsLegalChannel(): Invalid Channel\n"); + return 0; + } + if(pDot11dInfo->channel_map[channel] > 0) + return 1; + return 0; +} + +int ToLegalChannel( + struct ieee80211_device * dev, + u8 channel +) +{ + PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); + u8 default_chn = 0; + u32 i = 0; + + for (i=1; i<= MAX_CHANNEL_NUMBER; i++) + { + if(pDot11dInfo->channel_map[i] > 0) + { + default_chn = i; + break; + } + } + + if(MAX_CHANNEL_NUMBER < channel) + { + printk("IsLegalChannel(): Invalid Channel\n"); + return default_chn; + } + + if(pDot11dInfo->channel_map[channel] > 0) + return channel; + + return default_chn; +} + +#if 0 +EXPORT_SYMBOL(Dot11d_Init); +EXPORT_SYMBOL(Dot11d_Reset); +EXPORT_SYMBOL(Dot11d_UpdateCountryIe); +EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm); +EXPORT_SYMBOL(DOT11D_ScanComplete); +EXPORT_SYMBOL(IsLegalChannel); +EXPORT_SYMBOL(ToLegalChannel); +#endif +#endif diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.h b/drivers/staging/rtl8187se/ieee80211/dot11d.h index 64bcf15bd219..82576b519cc5 100644 --- a/drivers/staging/rtl8187se/ieee80211/dot11d.h +++ b/drivers/staging/rtl8187se/ieee80211/dot11d.h @@ -1,102 +1,102 @@ -#ifndef __INC_DOT11D_H -#define __INC_DOT11D_H - -#include "ieee80211.h" - -//#define ENABLE_DOT11D - -//#define DOT11D_MAX_CHNL_NUM 83 - -typedef struct _CHNL_TXPOWER_TRIPLE { - u8 FirstChnl; - u8 NumChnls; - u8 MaxTxPowerInDbm; -}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE; - -typedef enum _DOT11D_STATE { - DOT11D_STATE_NONE = 0, - DOT11D_STATE_LEARNED, - DOT11D_STATE_DONE, -}DOT11D_STATE; - -typedef struct _RT_DOT11D_INFO { - //DECLARE_RT_OBJECT(RT_DOT11D_INFO); - - bool bEnabled; // dot11MultiDomainCapabilityEnabled - - u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element. - u8 CountryIeBuf[MAX_IE_LEN]; - u8 CountryIeSrcAddr[6]; // Source AP of the country IE. - u8 CountryIeWatchdog; - - u8 channel_map[MAX_CHANNEL_NUMBER+1]; //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) - //u8 ChnlListLen; // #Bytes valid in ChnlList[]. - //u8 ChnlList[DOT11D_MAX_CHNL_NUM]; - u8 MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1]; - - DOT11D_STATE State; -}RT_DOT11D_INFO, *PRT_DOT11D_INFO; -#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 ) -#define cpMacAddr(des,src) ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5]) -#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo)) - -#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled -#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0) - -#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) -#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) - -#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \ - (((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \ - FALSE : \ - (!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length))) - -#define CIE_WATCHDOG_TH 1 -#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog -#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 -#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev) - -#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE) - - -void -Dot11d_Init( - struct ieee80211_device *dev - ); - -void -Dot11d_Reset( - struct ieee80211_device *dev - ); - -void -Dot11d_UpdateCountryIe( - struct ieee80211_device *dev, - u8 * pTaddr, - u16 CoutryIeLen, - u8 * pCoutryIe - ); - -u8 -DOT11D_GetMaxTxPwrInDbm( - struct ieee80211_device *dev, - u8 Channel - ); - -void -DOT11D_ScanComplete( - struct ieee80211_device * dev - ); - -int IsLegalChannel( - struct ieee80211_device * dev, - u8 channel -); - -int ToLegalChannel( - struct ieee80211_device * dev, - u8 channel -); - -void dump_chnl_map(u8 * channel_map); -#endif // #ifndef __INC_DOT11D_H +#ifndef __INC_DOT11D_H +#define __INC_DOT11D_H + +#include "ieee80211.h" + +//#define ENABLE_DOT11D + +//#define DOT11D_MAX_CHNL_NUM 83 + +typedef struct _CHNL_TXPOWER_TRIPLE { + u8 FirstChnl; + u8 NumChnls; + u8 MaxTxPowerInDbm; +}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE; + +typedef enum _DOT11D_STATE { + DOT11D_STATE_NONE = 0, + DOT11D_STATE_LEARNED, + DOT11D_STATE_DONE, +}DOT11D_STATE; + +typedef struct _RT_DOT11D_INFO { + //DECLARE_RT_OBJECT(RT_DOT11D_INFO); + + bool bEnabled; // dot11MultiDomainCapabilityEnabled + + u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element. + u8 CountryIeBuf[MAX_IE_LEN]; + u8 CountryIeSrcAddr[6]; // Source AP of the country IE. + u8 CountryIeWatchdog; + + u8 channel_map[MAX_CHANNEL_NUMBER+1]; //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) + //u8 ChnlListLen; // #Bytes valid in ChnlList[]. + //u8 ChnlList[DOT11D_MAX_CHNL_NUM]; + u8 MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1]; + + DOT11D_STATE State; +}RT_DOT11D_INFO, *PRT_DOT11D_INFO; +#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 ) +#define cpMacAddr(des,src) ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5]) +#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo)) + +#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled +#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0) + +#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) +#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) + +#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \ + (((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \ + FALSE : \ + (!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length))) + +#define CIE_WATCHDOG_TH 1 +#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog +#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 +#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev) + +#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE) + + +void +Dot11d_Init( + struct ieee80211_device *dev + ); + +void +Dot11d_Reset( + struct ieee80211_device *dev + ); + +void +Dot11d_UpdateCountryIe( + struct ieee80211_device *dev, + u8 * pTaddr, + u16 CoutryIeLen, + u8 * pCoutryIe + ); + +u8 +DOT11D_GetMaxTxPwrInDbm( + struct ieee80211_device *dev, + u8 Channel + ); + +void +DOT11D_ScanComplete( + struct ieee80211_device * dev + ); + +int IsLegalChannel( + struct ieee80211_device * dev, + u8 channel +); + +int ToLegalChannel( + struct ieee80211_device * dev, + u8 channel +); + +void dump_chnl_map(u8 * channel_map); +#endif // #ifndef __INC_DOT11D_H diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c index 742dc11fcac9..93b5a7bb2559 100644 --- a/drivers/staging/rtl8187se/r8180_dm.c +++ b/drivers/staging/rtl8187se/r8180_dm.c @@ -1,1725 +1,1725 @@ -//#include "r8180.h" -#include "r8180_dm.h" -#include "r8180_hw.h" -#include "r8180_93cx6.h" -//{by amy 080312 - -// -// Description: -// Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. -// -//+by amy 080312 -#define RATE_ADAPTIVE_TIMER_PERIOD 300 - -bool CheckHighPower(struct net_device *dev) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - struct ieee80211_device *ieee = priv->ieee80211; - - if(!priv->bRegHighPowerMechanism) - { - return false; - } - - if(ieee->state == IEEE80211_LINKED_SCANNING) - { - return false; - } - - return true; -} - -// -// Description: -// Update Tx power level if necessary. -// See also DoRxHighPower() and SetTxPowerLevel8185() for reference. -// -// Note: -// The reason why we udpate Tx power level here instead of DoRxHighPower() -// is the number of IO to change Tx power is much more than chane TR switch -// and they are related to OFDM and MAC registers. -// So, we don't want to update it so frequently in per-Rx packet base. -// -void -DoTxHighPower( - struct net_device *dev - ) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - u16 HiPwrUpperTh = 0; - u16 HiPwrLowerTh = 0; - u8 RSSIHiPwrUpperTh; - u8 RSSIHiPwrLowerTh; - u8 u1bTmp; - char OfdmTxPwrIdx, CckTxPwrIdx; - - //printk("----> DoTxHighPower()\n"); - - HiPwrUpperTh = priv->RegHiPwrUpperTh; - HiPwrLowerTh = priv->RegHiPwrLowerTh; - - HiPwrUpperTh = HiPwrUpperTh * 10; - HiPwrLowerTh = HiPwrLowerTh * 10; - RSSIHiPwrUpperTh = priv->RegRSSIHiPwrUpperTh; - RSSIHiPwrLowerTh = priv->RegRSSIHiPwrLowerTh; - - //lzm add 080826 - OfdmTxPwrIdx = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel]; - CckTxPwrIdx = priv->chtxpwr[priv->ieee80211->current_network.channel]; - - // printk("DoTxHighPower() - UndecoratedSmoothedSS:%d, CurCCKRSSI = %d , bCurCCKPkt= %d \n", priv->UndecoratedSmoothedSS, priv->CurCCKRSSI, priv->bCurCCKPkt ); - - if((priv->UndecoratedSmoothedSS > HiPwrUpperTh) || - (priv->bCurCCKPkt && (priv->CurCCKRSSI > RSSIHiPwrUpperTh))) - { - // Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah - - // printk("=====>DoTxHighPower() - High Power - UndecoratedSmoothedSS:%d, HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrUpperTh ); - priv->bToUpdateTxPwr = true; - u1bTmp= read_nic_byte(dev, CCK_TXAGC); - - // If it never enter High Power. - if( CckTxPwrIdx == u1bTmp) - { - u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0; // 8dbm - write_nic_byte(dev, CCK_TXAGC, u1bTmp); - - u1bTmp= read_nic_byte(dev, OFDM_TXAGC); - u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0; // 8dbm - write_nic_byte(dev, OFDM_TXAGC, u1bTmp); - } - - } - else if((priv->UndecoratedSmoothedSS < HiPwrLowerTh) && - (!priv->bCurCCKPkt || priv->CurCCKRSSI < RSSIHiPwrLowerTh)) - { - // printk("DoTxHighPower() - lower Power - UndecoratedSmoothedSS:%d, HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrLowerTh ); - if(priv->bToUpdateTxPwr) - { - priv->bToUpdateTxPwr = false; - //SD3 required. - u1bTmp= read_nic_byte(dev, CCK_TXAGC); - if(u1bTmp < CckTxPwrIdx) - { - //u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16); // 8dbm - //write_nic_byte(dev, CCK_TXAGC, u1bTmp); - write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx); - } - - u1bTmp= read_nic_byte(dev, OFDM_TXAGC); - if(u1bTmp < OfdmTxPwrIdx) - { - //u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16); // 8dbm - //write_nic_byte(dev, OFDM_TXAGC, u1bTmp); - write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx); - } - } - } - - //printk("<---- DoTxHighPower()\n"); -} - - -// -// Description: -// Callback function of UpdateTxPowerWorkItem. -// Because of some event happend, e.g. CCX TPC, High Power Mechanism, -// We update Tx power of current channel again. -// -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) -void rtl8180_tx_pw_wq (struct work_struct *work) -{ -// struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq); -// struct ieee80211_device * ieee = (struct ieee80211_device*) -// container_of(work, struct ieee80211_device, watch_dog_wq); - struct delayed_work *dwork = container_of(work,struct delayed_work,work); - struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,tx_pw_wq); - struct net_device *dev = ieee->dev; -#else -void rtl8180_tx_pw_wq(struct net_device *dev) -{ - // struct r8180_priv *priv = ieee80211_priv(dev); -#endif - -// printk("----> UpdateTxPowerWorkItemCallback()\n"); - - DoTxHighPower(dev); - -// printk("<---- UpdateTxPowerWorkItemCallback()\n"); -} - - -// -// Description: -// Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise. -// -bool -CheckDig( - struct net_device *dev - ) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - struct ieee80211_device *ieee = priv->ieee80211; - - if(!priv->bDigMechanism) - return false; - - if(ieee->state != IEEE80211_LINKED) - return false; - - //if(priv->CurrentOperaRate < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01. - if((priv->ieee80211->rate/5) < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01. - return false; - return true; -} -// -// Description: -// Implementation of DIG for Zebra and Zebra2. -// -void -DIG_Zebra( - struct net_device *dev - ) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - u16 CCKFalseAlarm, OFDMFalseAlarm; - u16 OfdmFA1, OfdmFA2; - int InitialGainStep = 7; // The number of initial gain stages. - int LowestGainStage = 4; // The capable lowest stage of performing dig workitem. - u32 AwakePeriodIn2Sec=0; - - //printk("---------> DIG_Zebra()\n"); - - CCKFalseAlarm = (u16)(priv->FalseAlarmRegValue & 0x0000ffff); - OFDMFalseAlarm = (u16)((priv->FalseAlarmRegValue >> 16) & 0x0000ffff); - OfdmFA1 = 0x15; - OfdmFA2 = ((u16)(priv->RegDigOfdmFaUpTh)) << 8; - -// printk("DIG**********CCK False Alarm: %#X \n",CCKFalseAlarm); -// printk("DIG**********OFDM False Alarm: %#X \n",OFDMFalseAlarm); - - // The number of initial gain steps is different, by Bruce, 2007-04-13. - if (priv->InitialGain == 0 ) //autoDIG - { // Advised from SD3 DZ - priv->InitialGain = 4; // In 87B, m74dBm means State 4 (m82dBm) - } - //if(pHalData->VersionID != VERSION_8187B_B) - { // Advised from SD3 DZ - OfdmFA1 = 0x20; - } - -#if 1 //lzm reserved 080826 - AwakePeriodIn2Sec = (2000-priv ->DozePeriodInPast2Sec); - //printk("&&& DozePeriod=%d AwakePeriod=%d\n", priv->DozePeriodInPast2Sec, AwakePeriodIn2Sec); - priv ->DozePeriodInPast2Sec=0; - - if(AwakePeriodIn2Sec) - { - //RT_TRACE(COMP_DIG, DBG_TRACE, ("DIG: AwakePeriodIn2Sec(%d) - FATh(0x%X , 0x%X) ->",AwakePeriodIn2Sec, OfdmFA1, OfdmFA2)); - // adjuest DIG threshold. - OfdmFA1 = (u16)((OfdmFA1*AwakePeriodIn2Sec) / 2000) ; - OfdmFA2 = (u16)((OfdmFA2*AwakePeriodIn2Sec) / 2000) ; - //RT_TRACE(COMP_DIG, DBG_TRACE, ("( 0x%X , 0x%X)\n", OfdmFA1, OfdmFA2)); - } - else - { - ;//RT_TRACE(COMP_DIG, DBG_WARNING, ("ERROR!! AwakePeriodIn2Sec should not be ZERO!!\n")); - } -#endif - - InitialGainStep = 8; - LowestGainStage = priv->RegBModeGainStage; // Lowest gain stage. - - if (OFDMFalseAlarm > OfdmFA1) - { - if (OFDMFalseAlarm > OfdmFA2) - { - priv->DIG_NumberFallbackVote++; - if (priv->DIG_NumberFallbackVote >1) - { - //serious OFDM False Alarm, need fallback - if (priv->InitialGain < InitialGainStep) - { - priv->InitialGainBackUp= priv->InitialGain; - - priv->InitialGain = (priv->InitialGain + 1); -// printk("DIG**********OFDM False Alarm: %#X, OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2); -// printk("DIG+++++++ fallback OFDM:%d \n", priv->InitialGain); - UpdateInitialGain(dev); - } - priv->DIG_NumberFallbackVote = 0; - priv->DIG_NumberUpgradeVote=0; - } - } - else - { - if (priv->DIG_NumberFallbackVote) - priv->DIG_NumberFallbackVote--; - } - priv->DIG_NumberUpgradeVote=0; - } - else - { - if (priv->DIG_NumberFallbackVote) - priv->DIG_NumberFallbackVote--; - priv->DIG_NumberUpgradeVote++; - - if (priv->DIG_NumberUpgradeVote>9) - { - if (priv->InitialGain > LowestGainStage) // In 87B, m78dBm means State 4 (m864dBm) - { - priv->InitialGainBackUp= priv->InitialGain; - - priv->InitialGain = (priv->InitialGain - 1); -// printk("DIG**********OFDM False Alarm: %#X, OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2); -// printk("DIG--------- Upgrade OFDM:%d \n", priv->InitialGain); - UpdateInitialGain(dev); - } - priv->DIG_NumberFallbackVote = 0; - priv->DIG_NumberUpgradeVote=0; - } - } - -// printk("DIG+++++++ OFDM:%d\n", priv->InitialGain); - //printk("<--------- DIG_Zebra()\n"); -} - -// -// Description: -// Dispatch DIG implementation according to RF. -// -void -DynamicInitGain( - struct net_device *dev - ) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - - switch(priv->rf_chip) - { - case RF_ZEBRA2: // [AnnieWorkaround] For Zebra2, 2005-08-01. - case RF_ZEBRA4: - DIG_Zebra( dev ); - break; - - default: - printk("DynamicInitGain(): unknown RFChipID(%d) !!!\n", priv->rf_chip); - break; - } -} - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) -void rtl8180_hw_dig_wq (struct work_struct *work) -{ -// struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq); -// struct ieee80211_device * ieee = (struct ieee80211_device*) -// container_of(work, struct ieee80211_device, watch_dog_wq); - struct delayed_work *dwork = container_of(work,struct delayed_work,work); - struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_dig_wq); - struct net_device *dev = ieee->dev; -#else -void rtl8180_hw_dig_wq(struct net_device *dev) -{ - -#endif - struct r8180_priv *priv = ieee80211_priv(dev); - - // Read CCK and OFDM False Alarm. - priv->FalseAlarmRegValue = read_nic_dword(dev, CCK_FALSE_ALARM); - - - // Adjust Initial Gain dynamically. - DynamicInitGain(dev); - -} - -int -IncludedInSupportedRates( - struct r8180_priv *priv, - u8 TxRate ) -{ - u8 rate_len; - u8 rate_ex_len; - u8 RateMask = 0x7F; - u8 idx; - unsigned short Found = 0; - u8 NaiveTxRate = TxRate&RateMask; - - rate_len = priv->ieee80211->current_network.rates_len; - rate_ex_len = priv->ieee80211->current_network.rates_ex_len; - for( idx=0; idx< rate_len; idx++ ) - { - if( (priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate ) - { - Found = 1; - goto found_rate; - } - } - for( idx=0; idx< rate_ex_len; idx++ ) - { - if( (priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate ) - { - Found = 1; - goto found_rate; - } - } - return Found; - found_rate: - return Found; -} - -// -// Description: -// Get the Tx rate one degree up form the input rate in the supported rates. -// Return the upgrade rate if it is successed, otherwise return the input rate. -// By Bruce, 2007-06-05. -// -u8 -GetUpgradeTxRate( - struct net_device *dev, - u8 rate - ) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - u8 UpRate; - - // Upgrade 1 degree. - switch(rate) - { - case 108: // Up to 54Mbps. - UpRate = 108; - break; - - case 96: // Up to 54Mbps. - UpRate = 108; - break; - - case 72: // Up to 48Mbps. - UpRate = 96; - break; - - case 48: // Up to 36Mbps. - UpRate = 72; - break; - - case 36: // Up to 24Mbps. - UpRate = 48; - break; - - case 22: // Up to 18Mbps. - UpRate = 36; - break; - - case 11: // Up to 11Mbps. - UpRate = 22; - break; - - case 4: // Up to 5.5Mbps. - UpRate = 11; - break; - - case 2: // Up to 2Mbps. - UpRate = 4; - break; - - default: - printk("GetUpgradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate); - return rate; - } - // Check if the rate is valid. - if(IncludedInSupportedRates(priv, UpRate)) - { -// printk("GetUpgradeTxRate(): GetUpgrade Tx rate(%d) from %d !\n", UpRate, priv->CurrentOperaRate); - return UpRate; - } - else - { - //printk("GetUpgradeTxRate(): Tx rate (%d) is not in supported rates\n", UpRate); - return rate; - } - return rate; -} -// -// Description: -// Get the Tx rate one degree down form the input rate in the supported rates. -// Return the degrade rate if it is successed, otherwise return the input rate. -// By Bruce, 2007-06-05. -// -u8 -GetDegradeTxRate( - struct net_device *dev, - u8 rate - ) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - u8 DownRate; - - // Upgrade 1 degree. - switch(rate) - { - case 108: // Down to 48Mbps. - DownRate = 96; - break; - - case 96: // Down to 36Mbps. - DownRate = 72; - break; - - case 72: // Down to 24Mbps. - DownRate = 48; - break; - - case 48: // Down to 18Mbps. - DownRate = 36; - break; - - case 36: // Down to 11Mbps. - DownRate = 22; - break; - - case 22: // Down to 5.5Mbps. - DownRate = 11; - break; - - case 11: // Down to 2Mbps. - DownRate = 4; - break; - - case 4: // Down to 1Mbps. - DownRate = 2; - break; - - case 2: // Down to 1Mbps. - DownRate = 2; - break; - - default: - printk("GetDegradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate); - return rate; - } - // Check if the rate is valid. - if(IncludedInSupportedRates(priv, DownRate)) - { -// printk("GetDegradeTxRate(): GetDegrade Tx rate(%d) from %d!\n", DownRate, priv->CurrentOperaRate); - return DownRate; - } - else - { - //printk("GetDegradeTxRate(): Tx rate (%d) is not in supported rates\n", DownRate); - return rate; - } - return rate; -} -// -// Helper function to determine if specified data rate is -// CCK rate. -// 2005.01.25, by rcnjko. -// -bool -MgntIsCckRate( - u16 rate - ) -{ - bool bReturn = false; - - if((rate <= 22) && (rate != 12) && (rate != 18)) - { - bReturn = true; - } - - return bReturn; -} -#ifdef CONFIG_RTL818X_S -// -// Description: -// Tx Power tracking mechanism routine on 87SE. -// Created by Roger, 2007.12.11. -// -void -TxPwrTracking87SE( - struct net_device *dev -) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - u8 tmpu1Byte, CurrentThermal, Idx; - char CckTxPwrIdx, OfdmTxPwrIdx; - //u32 u4bRfReg; - - tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL); - CurrentThermal = (tmpu1Byte & 0xf0)>>4; //[ 7:4]: thermal meter indication. - CurrentThermal = (CurrentThermal>0x0c)? 0x0c:CurrentThermal;//lzm add 080826 - - //printk("TxPwrTracking87SE(): CurrentThermal(%d)\n", CurrentThermal); - - if( CurrentThermal != priv->ThermalMeter) - { -// printk("TxPwrTracking87SE(): Thermal meter changed!!!\n"); - - // Update Tx Power level on each channel. - for(Idx = 1; Idx<15; Idx++) - { - CckTxPwrIdx = priv->chtxpwr[Idx]; - OfdmTxPwrIdx = priv->chtxpwr_ofdm[Idx]; - - if( CurrentThermal > priv->ThermalMeter ) - { // higher thermal meter. - CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2; - OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2; - - if(CckTxPwrIdx >35) - CckTxPwrIdx = 35; // Force TxPower to maximal index. - if(OfdmTxPwrIdx >35) - OfdmTxPwrIdx = 35; - } - else - { // lower thermal meter. - CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2; - OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2; - - if(CckTxPwrIdx <0) - CckTxPwrIdx = 0; - if(OfdmTxPwrIdx <0) - OfdmTxPwrIdx = 0; - } - - // Update TxPower level on CCK and OFDM resp. - priv->chtxpwr[Idx] = CckTxPwrIdx; - priv->chtxpwr_ofdm[Idx] = OfdmTxPwrIdx; - } - - // Update TxPower level immediately. - rtl8225z2_SetTXPowerLevel(dev, priv->ieee80211->current_network.channel); - } - priv->ThermalMeter = CurrentThermal; -} -void -StaRateAdaptive87SE( - struct net_device *dev - ) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - unsigned long CurrTxokCnt; - u16 CurrRetryCnt; - u16 CurrRetryRate; - //u16 i,idx; - unsigned long CurrRxokCnt; - bool bTryUp = false; - bool bTryDown = false; - u8 TryUpTh = 1; - u8 TryDownTh = 2; - u32 TxThroughput; - long CurrSignalStrength; - bool bUpdateInitialGain = false; - u8 u1bOfdm=0, u1bCck = 0; - char OfdmTxPwrIdx, CckTxPwrIdx; - - priv->RateAdaptivePeriod= RATE_ADAPTIVE_TIMER_PERIOD; - - - CurrRetryCnt = priv->CurrRetryCnt; - CurrTxokCnt = priv->NumTxOkTotal - priv->LastTxokCnt; - CurrRxokCnt = priv->ieee80211->NumRxOkTotal - priv->LastRxokCnt; - CurrSignalStrength = priv->Stats_RecvSignalPower; - TxThroughput = (u32)(priv->NumTxOkBytesTotal - priv->LastTxOKBytes); - priv->LastTxOKBytes = priv->NumTxOkBytesTotal; - priv->CurrentOperaRate = priv->ieee80211->rate/5; - //printk("priv->CurrentOperaRate is %d\n",priv->CurrentOperaRate); - //2 Compute retry ratio. - if (CurrTxokCnt>0) - { - CurrRetryRate = (u16)(CurrRetryCnt*100/CurrTxokCnt); - } - else - { // It may be serious retry. To distinguish serious retry or no packets modified by Bruce - CurrRetryRate = (u16)(CurrRetryCnt*100/1); - } - - - // - // Added by Roger, 2007.01.02. - // For debug information. - // - //printk("\n(1) pHalData->LastRetryRate: %d \n",priv->LastRetryRate); - //printk("(2) RetryCnt = %d \n", CurrRetryCnt); - //printk("(3) TxokCnt = %d \n", CurrTxokCnt); - //printk("(4) CurrRetryRate = %d \n", CurrRetryRate); - //printk("(5) CurrSignalStrength = %d \n",CurrSignalStrength); - //printk("(6) TxThroughput is %d\n",TxThroughput); - //printk("priv->NumTxOkBytesTotal is %d\n",priv->NumTxOkBytesTotal); - - priv->LastRetryCnt = priv->CurrRetryCnt; - priv->LastTxokCnt = priv->NumTxOkTotal; - priv->LastRxokCnt = priv->ieee80211->NumRxOkTotal; - priv->CurrRetryCnt = 0; - - //2No Tx packets, return to init_rate or not? - if (CurrRetryRate==0 && CurrTxokCnt == 0) - { - // - //After 9 (30*300ms) seconds in this condition, we try to raise rate. - // - priv->TryupingCountNoData++; - -// printk("No Tx packets, TryupingCountNoData(%d)\n", priv->TryupingCountNoData); - //[TRC Dell Lab] Extend raised period from 4.5sec to 9sec, Isaiah 2008-02-15 18:00 - if (priv->TryupingCountNoData>30) - { - priv->TryupingCountNoData = 0; - priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate); - // Reset Fail Record - priv->LastFailTxRate = 0; - priv->LastFailTxRateSS = -200; - priv->FailTxRateCount = 0; - } - goto SetInitialGain; - } - else - { - priv->TryupingCountNoData=0; //Reset trying up times. - } - - - // - // For Netgear case, I comment out the following signal strength estimation, - // which can results in lower rate to transmit when sample is NOT enough (e.g. PING request). - // 2007.04.09, by Roger. - // - - // - // Restructure rate adaptive as the following main stages: - // (1) Add retry threshold in 54M upgrading condition with signal strength. - // (2) Add the mechanism to degrade to CCK rate according to signal strength - // and retry rate. - // (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated - // situation, Initial Gain Update is upon on DIG mechanism except CCK rate. - // (4) Add the mehanism of trying to upgrade tx rate. - // (5) Record the information of upping tx rate to avoid trying upping tx rate constantly. - // By Bruce, 2007-06-05. - // - // - - // 11Mbps or 36Mbps - // Check more times in these rate(key rates). - // - if(priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72) - { - TryUpTh += 9; - } - // - // Let these rates down more difficult. - // - if(MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36) - { - TryDownTh += 1; - } - - //1 Adjust Rate. - if (priv->bTryuping == true) - { - //2 For Test Upgrading mechanism - // Note: - // Sometimes the throughput is upon on the capability bwtween the AP and NIC, - // thus the low data rate does not improve the performance. - // We randomly upgrade the data rate and check if the retry rate is improved. - - // Upgrading rate did not improve the retry rate, fallback to the original rate. - if ( (CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput) - { - //Not necessary raising rate, fall back rate. - bTryDown = true; - //printk("case1-1: Not necessary raising rate, fall back rate....\n"); - //printk("case1-1: pMgntInfo->CurrentOperaRate =%d, TxThroughput = %d, LastThroughput = %d\n", - // priv->CurrentOperaRate, TxThroughput, priv->LastTxThroughput); - } - else - { - priv->bTryuping = false; - } - } - else if (CurrSignalStrength > -47 && (CurrRetryRate < 50)) - { - //2For High Power - // - // Added by Roger, 2007.04.09. - // Return to highest data rate, if signal strength is good enough. - // SignalStrength threshold(-50dbm) is for RTL8186. - // Revise SignalStrength threshold to -51dbm. - // - // Also need to check retry rate for safety, by Bruce, 2007-06-05. - if(priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate ) - { - bTryUp = true; - // Upgrade Tx Rate directly. - priv->TryupingCount += TryUpTh; - } -// printk("case2: StaRateAdaptive87SE: Power(%d) is high enough!!. \n", CurrSignalStrength); - - } - else if(CurrTxokCnt > 9 && CurrTxokCnt< 100 && CurrRetryRate >= 600) - { - //2 For Serious Retry - // - // Traffic is not busy but our Tx retry is serious. - // - bTryDown = true; - // Let Rate Mechanism to degrade tx rate directly. - priv->TryDownCountLowData += TryDownTh; -// printk("case3: RA: Tx Retry is serious. Degrade Tx Rate to %d directly...\n", priv->CurrentOperaRate); - } - else if ( priv->CurrentOperaRate == 108 ) - { - //2For 54Mbps - // Air Link - if ( (CurrRetryRate>26)&&(priv->LastRetryRate>25)) -// if ( (CurrRetryRate>40)&&(priv->LastRetryRate>39)) - { - //Down to rate 48Mbps. - bTryDown = true; - } - // Cable Link - else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72)) -// else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72)) - { - //Down to rate 48Mbps. - bTryDown = true; - } - - if(bTryDown && (CurrSignalStrength < -75)) //cable link - { - priv->TryDownCountLowData += TryDownTh; - } - //printk("case4---54M \n"); - - } - else if ( priv->CurrentOperaRate == 96 ) - { - //2For 48Mbps - //Air Link - if ( ((CurrRetryRate>48) && (priv->LastRetryRate>47))) -// if ( ((CurrRetryRate>65) && (priv->LastRetryRate>64))) - - { - //Down to rate 36Mbps. - bTryDown = true; - } - //Cable Link - else if ( ((CurrRetryRate>21) && (priv->LastRetryRate>20)) && (CurrSignalStrength > -74)) - { - //Down to rate 36Mbps. - bTryDown = true; - } - else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) -// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) - { - bTryDown = true; - priv->TryDownCountLowData += TryDownTh; - } - else if ( (CurrRetryRate<8) && (priv->LastRetryRate<8) ) //TO DO: need to consider (RSSI) -// else if ( (CurrRetryRate<28) && (priv->LastRetryRate<8) ) - { - bTryUp = true; - } - - if(bTryDown && (CurrSignalStrength < -75)) - { - priv->TryDownCountLowData += TryDownTh; - } - //printk("case5---48M \n"); - } - else if ( priv->CurrentOperaRate == 72 ) - { - //2For 36Mbps - if ( (CurrRetryRate>43) && (priv->LastRetryRate>41)) -// if ( (CurrRetryRate>60) && (priv->LastRetryRate>59)) - { - //Down to rate 24Mbps. - bTryDown = true; - } - else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) -// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) - { - bTryDown = true; - priv->TryDownCountLowData += TryDownTh; - } - else if ( (CurrRetryRate<15) && (priv->LastRetryRate<16)) //TO DO: need to consider (RSSI) -// else if ( (CurrRetryRate<35) && (priv->LastRetryRate<36)) - { - bTryUp = true; - } - - if(bTryDown && (CurrSignalStrength < -80)) - { - priv->TryDownCountLowData += TryDownTh; - } - //printk("case6---36M \n"); - } - else if ( priv->CurrentOperaRate == 48 ) - { - //2For 24Mbps - // Air Link - if ( ((CurrRetryRate>63) && (priv->LastRetryRate>62))) -// if ( ((CurrRetryRate>83) && (priv->LastRetryRate>82))) - { - //Down to rate 18Mbps. - bTryDown = true; - } - //Cable Link - else if ( ((CurrRetryRate>33) && (priv->LastRetryRate>32)) && (CurrSignalStrength > -82) ) -// else if ( ((CurrRetryRate>50) && (priv->LastRetryRate>49)) && (CurrSignalStrength > -82) ) - { - //Down to rate 18Mbps. - bTryDown = true; - } - else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) -// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) - - { - bTryDown = true; - priv->TryDownCountLowData += TryDownTh; - } - else if ( (CurrRetryRate<20) && (priv->LastRetryRate<21)) //TO DO: need to consider (RSSI) -// else if ( (CurrRetryRate<40) && (priv->LastRetryRate<41)) - { - bTryUp = true; - } - - if(bTryDown && (CurrSignalStrength < -82)) - { - priv->TryDownCountLowData += TryDownTh; - } - //printk("case7---24M \n"); - } - else if ( priv->CurrentOperaRate == 36 ) - { - //2For 18Mbps - // original (109, 109) - //[TRC Dell Lab] (90, 91), Isaiah 2008-02-18 23:24 - // (85, 86), Isaiah 2008-02-18 24:00 - if ( ((CurrRetryRate>85) && (priv->LastRetryRate>86))) -// if ( ((CurrRetryRate>115) && (priv->LastRetryRate>116))) - { - //Down to rate 11Mbps. - bTryDown = true; - } - //[TRC Dell Lab] Isaiah 2008-02-18 23:24 - else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) -// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) - { - bTryDown = true; - priv->TryDownCountLowData += TryDownTh; - } - else if ( (CurrRetryRate<22) && (priv->LastRetryRate<23)) //TO DO: need to consider (RSSI) -// else if ( (CurrRetryRate<42) && (priv->LastRetryRate<43)) - { - bTryUp = true; - } - //printk("case8---18M \n"); - } - else if ( priv->CurrentOperaRate == 22 ) - { - //2For 11Mbps - if (CurrRetryRate>95) -// if (CurrRetryRate>155) - { - bTryDown = true; - } - else if ( (CurrRetryRate<29) && (priv->LastRetryRate <30) )//TO DO: need to consider (RSSI) -// else if ( (CurrRetryRate<49) && (priv->LastRetryRate <50) ) - { - bTryUp = true; - } - //printk("case9---11M \n"); - } - else if ( priv->CurrentOperaRate == 11 ) - { - //2For 5.5Mbps - if (CurrRetryRate>149) -// if (CurrRetryRate>189) - { - bTryDown = true; - } - else if ( (CurrRetryRate<60) && (priv->LastRetryRate < 65)) -// else if ( (CurrRetryRate<80) && (priv->LastRetryRate < 85)) - - { - bTryUp = true; - } - //printk("case10---5.5M \n"); - } - else if ( priv->CurrentOperaRate == 4 ) - { - //2For 2 Mbps - if((CurrRetryRate>99) && (priv->LastRetryRate>99)) -// if((CurrRetryRate>199) && (priv->LastRetryRate>199)) - { - bTryDown = true; - } - else if ( (CurrRetryRate < 65) && (priv->LastRetryRate < 70)) -// else if ( (CurrRetryRate < 85) && (priv->LastRetryRate < 90)) - { - bTryUp = true; - } - //printk("case11---2M \n"); - } - else if ( priv->CurrentOperaRate == 2 ) - { - //2For 1 Mbps - if( (CurrRetryRate<70) && (priv->LastRetryRate<75)) -// if( (CurrRetryRate<90) && (priv->LastRetryRate<95)) - { - bTryUp = true; - } - //printk("case12---1M \n"); - } - - if(bTryUp && bTryDown) - printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n"); - - //1 Test Upgrading Tx Rate - // Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC. - // To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate. - if(!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0) - && priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2) - { - if(jiffies% (CurrRetryRate + 101) == 0) - { - bTryUp = true; - priv->bTryuping = true; - //printk("StaRateAdaptive87SE(): Randomly try upgrading...\n"); - } - } - - //1 Rate Mechanism - if(bTryUp) - { - priv->TryupingCount++; - priv->TryDownCountLowData = 0; - - { -// printk("UP: pHalData->TryupingCount = %d\n", priv->TryupingCount); -// printk("UP: TryUpTh(%d)+ (FailTxRateCount(%d))^2 =%d\n", -// TryUpTh, priv->FailTxRateCount, (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount) ); -// printk("UP: pHalData->bTryuping=%d\n", priv->bTryuping); - - } - - // - // Check more times if we need to upgrade indeed. - // Because the largest value of pHalData->TryupingCount is 0xFFFF and - // the largest value of pHalData->FailTxRateCount is 0x14, - // this condition will be satisfied at most every 2 min. - // - - if((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) || - (CurrSignalStrength > priv->LastFailTxRateSS) || priv->bTryuping) - { - priv->TryupingCount = 0; - // - // When transfering from CCK to OFDM, DIG is an important issue. - // - if(priv->CurrentOperaRate == 22) - bUpdateInitialGain = true; - - // The difference in throughput between 48Mbps and 36Mbps is 8M. - // So, we must be carefully in this rate scale. Isaiah 2008-02-15. - // - if( ((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) && - (priv->FailTxRateCount > 2) ) - priv->RateAdaptivePeriod= (RATE_ADAPTIVE_TIMER_PERIOD/2); - - // (1)To avoid upgrade frequently to the fail tx rate, add the FailTxRateCount into the threshold. - // (2)If the signal strength is increased, it may be able to upgrade. - - priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate); -// printk("StaRateAdaptive87SE(): Upgrade Tx Rate to %d\n", priv->CurrentOperaRate); - - //[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00 - if(priv->CurrentOperaRate ==36) - { - priv->bUpdateARFR=true; - write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6 -// printk("UP: ARFR=0xF8F\n"); - } - else if(priv->bUpdateARFR) - { - priv->bUpdateARFR=false; - write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps. -// printk("UP: ARFR=0xFFF\n"); - } - - // Update Fail Tx rate and count. - if(priv->LastFailTxRate != priv->CurrentOperaRate) - { - priv->LastFailTxRate = priv->CurrentOperaRate; - priv->FailTxRateCount = 0; - priv->LastFailTxRateSS = -200; // Set lowest power. - } - } - } - else - { - if(priv->TryupingCount > 0) - priv->TryupingCount --; - } - - if(bTryDown) - { - priv->TryDownCountLowData++; - priv->TryupingCount = 0; - { -// printk("DN: pHalData->TryDownCountLowData = %d\n",priv->TryDownCountLowData); -// printk("DN: TryDownTh =%d\n", TryDownTh); -// printk("DN: pHalData->bTryuping=%d\n", priv->bTryuping); - } - - //Check if Tx rate can be degraded or Test trying upgrading should fallback. - if(priv->TryDownCountLowData > TryDownTh || priv->bTryuping) - { - priv->TryDownCountLowData = 0; - priv->bTryuping = false; - // Update fail information. - if(priv->LastFailTxRate == priv->CurrentOperaRate) - { - priv->FailTxRateCount ++; - // Record the Tx fail rate signal strength. - if(CurrSignalStrength > priv->LastFailTxRateSS) - { - priv->LastFailTxRateSS = CurrSignalStrength; - } - } - else - { - priv->LastFailTxRate = priv->CurrentOperaRate; - priv->FailTxRateCount = 1; - priv->LastFailTxRateSS = CurrSignalStrength; - } - priv->CurrentOperaRate = GetDegradeTxRate(dev, priv->CurrentOperaRate); - - // Reduce chariot training time at weak signal strength situation. SD3 ED demand. - //[TRC Dell Lab] Revise Signal Threshold from -75 to -80 , Isaiah 2008-02-18 20:00 - if( (CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72 )) - { - priv->CurrentOperaRate = 72; -// printk("DN: weak signal strength (%d), degrade to 36Mbps\n", CurrSignalStrength); - } - - //[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00 - if(priv->CurrentOperaRate ==36) - { - priv->bUpdateARFR=true; - write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6 -// printk("DN: ARFR=0xF8F\n"); - } - else if(priv->bUpdateARFR) - { - priv->bUpdateARFR=false; - write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps. -// printk("DN: ARFR=0xFFF\n"); - } - - // - // When it is CCK rate, it may need to update initial gain to receive lower power packets. - // - if(MgntIsCckRate(priv->CurrentOperaRate)) - { - bUpdateInitialGain = true; - } -// printk("StaRateAdaptive87SE(): Degrade Tx Rate to %d\n", priv->CurrentOperaRate); - } - } - else - { - if(priv->TryDownCountLowData > 0) - priv->TryDownCountLowData --; - } - - // Keep the Tx fail rate count to equal to 0x15 at most. - // Reduce the fail count at least to 10 sec if tx rate is tending stable. - if(priv->FailTxRateCount >= 0x15 || - (!bTryUp && !bTryDown && priv->TryDownCountLowData == 0 && priv->TryupingCount && priv->FailTxRateCount > 0x6)) - { - priv->FailTxRateCount --; - } - - - OfdmTxPwrIdx = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel]; - CckTxPwrIdx = priv->chtxpwr[priv->ieee80211->current_network.channel]; - - //[TRC Dell Lab] Mac0x9e increase 2 level in 36M~18M situation, Isaiah 2008-02-18 24:00 - if((priv->CurrentOperaRate < 96) &&(priv->CurrentOperaRate > 22)) - { - u1bCck = read_nic_byte(dev, CCK_TXAGC); - u1bOfdm = read_nic_byte(dev, OFDM_TXAGC); - - // case 1: Never enter High power - if(u1bCck == CckTxPwrIdx ) - { - if(u1bOfdm != (OfdmTxPwrIdx+2) ) - { - priv->bEnhanceTxPwr= true; - u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2); - write_nic_byte(dev, OFDM_TXAGC, u1bOfdm); -// printk("Enhance OFDM_TXAGC : +++++ u1bOfdm= 0x%x\n", u1bOfdm); - } - } - // case 2: enter high power - else if(u1bCck < CckTxPwrIdx) - { - if(!priv->bEnhanceTxPwr) - { - priv->bEnhanceTxPwr= true; - u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2); - write_nic_byte(dev, OFDM_TXAGC, u1bOfdm); - //RT_TRACE(COMP_RATE, DBG_TRACE, ("Enhance OFDM_TXAGC(2) : +++++ u1bOfdm= 0x%x\n", u1bOfdm)); - } - } - } - else if(priv->bEnhanceTxPwr) //54/48/11/5.5/2/1 - { - u1bCck = read_nic_byte(dev, CCK_TXAGC); - u1bOfdm = read_nic_byte(dev, OFDM_TXAGC); - - // case 1: Never enter High power - if(u1bCck == CckTxPwrIdx ) - { - priv->bEnhanceTxPwr= false; - write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx); - //printk("Recover OFDM_TXAGC : ===== u1bOfdm= 0x%x\n", OfdmTxPwrIdx); - } - // case 2: enter high power - else if(u1bCck < CckTxPwrIdx) - { - priv->bEnhanceTxPwr= false; - u1bOfdm = ((u1bOfdm-2) > 0) ? (u1bOfdm-2): 0; - write_nic_byte(dev, OFDM_TXAGC, u1bOfdm); - //RT_TRACE(COMP_RATE, DBG_TRACE, ("Recover OFDM_TXAGC(2): ===== u1bOfdm= 0x%x\n", u1bOfdm)); - - } - } - - // - // We need update initial gain when we set tx rate "from OFDM to CCK" or - // "from CCK to OFDM". - // -SetInitialGain: - if(bUpdateInitialGain) - { - if(MgntIsCckRate(priv->CurrentOperaRate)) // CCK - { - if(priv->InitialGain > priv->RegBModeGainStage) - { - priv->InitialGainBackUp= priv->InitialGain; - - if(CurrSignalStrength < -85) // Low power, OFDM [0x17] = 26. - { - //SD3 SYs suggest that CurrSignalStrength < -65, ofdm 0x17=26. - priv->InitialGain = priv->RegBModeGainStage; - } - else if(priv->InitialGain > priv->RegBModeGainStage + 1) - { - priv->InitialGain -= 2; - } - else - { - priv->InitialGain --; - } - printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate); - UpdateInitialGain(dev); - } - } - else // OFDM - { - if(priv->InitialGain < 4) - { - priv->InitialGainBackUp= priv->InitialGain; - - priv->InitialGain ++; - printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate); - UpdateInitialGain(dev); - } - } - } - - //Record the related info - priv->LastRetryRate = CurrRetryRate; - priv->LastTxThroughput = TxThroughput; - priv->ieee80211->rate = priv->CurrentOperaRate * 5; -} - -#endif -#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20) -void rtl8180_rate_adapter(struct work_struct * work) -{ - struct delayed_work *dwork = container_of(work,struct delayed_work,work); - struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,rate_adapter_wq); - struct net_device *dev = ieee->dev; -#else -void rtl8180_rate_adapter(struct net_device *dev) -{ - -#endif - //struct r8180_priv *priv = ieee80211_priv(dev); -// DMESG("---->rtl8180_rate_adapter"); - StaRateAdaptive87SE(dev); -// DMESG("<----rtl8180_rate_adapter"); -} -void timer_rate_adaptive(unsigned long data) -{ - struct r8180_priv* priv = ieee80211_priv((struct net_device *)data); - //DMESG("---->timer_rate_adaptive()\n"); - if(!priv->up) - { -// DMESG("<----timer_rate_adaptive():driver is not up!\n"); - return; - } - if((priv->ieee80211->iw_mode != IW_MODE_MASTER) - && (priv->ieee80211->state == IEEE80211_LINKED) && - (priv->ForcedDataRate == 0) ) - { -// DMESG("timer_rate_adaptive():schedule rate_adapter_wq\n"); -#ifdef CONFIG_RTL818X_S - queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq); -// StaRateAdaptive87SE((struct net_device *)data); -#endif - } - priv->rateadapter_timer.expires = jiffies + MSECS(priv->RateAdaptivePeriod); - add_timer(&priv->rateadapter_timer); - //DMESG("<----timer_rate_adaptive()\n"); -} -//by amy 080312} -void -SwAntennaDiversityRxOk8185( - struct net_device *dev, - u8 SignalStrength - ) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - -// printk("+SwAntennaDiversityRxOk8185: RxSs: %d\n", SignalStrength); - - priv->AdRxOkCnt++; - - if( priv->AdRxSignalStrength != -1) - { - priv->AdRxSignalStrength = ((priv->AdRxSignalStrength*7) + (SignalStrength*3)) / 10; - } - else - { // Initialization case. - priv->AdRxSignalStrength = SignalStrength; - } -//{+by amy 080312 - if( priv->LastRxPktAntenna ) //Main antenna. - priv->AdMainAntennaRxOkCnt++; - else // Aux antenna. - priv->AdAuxAntennaRxOkCnt++; -//+by amy 080312 -// printk("-SwAntennaDiversityRxOk8185: AdRxOkCnt: %d AdRxSignalStrength: %d\n", priv->AdRxOkCnt, priv->AdRxSignalStrength); -} -// -// Description: -// Change Antenna Switch. -// -bool -SetAntenna8185( - struct net_device *dev, - u8 u1bAntennaIndex - ) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - bool bAntennaSwitched = false; - -// printk("+SetAntenna8185(): Antenna is switching to: %d \n", u1bAntennaIndex); - - switch(u1bAntennaIndex) - { - case 0: - switch(priv->rf_chip) - { - case RF_ZEBRA2: - case RF_ZEBRA4: -#ifdef CONFIG_RTL8185B -#ifdef CONFIG_RTL818X_S - // Mac register, main antenna - write_nic_byte(dev, ANTSEL, 0x03); - //base band - write_phy_cck(dev,0x11, 0x9b); // Config CCK RX antenna. - write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna. - -#else - // Mac register, main antenna - write_nic_byte(dev, ANTSEL, 0x03); - //base band - write_phy_cck(dev, 0x10, 0x9b); // Config CCK RX antenna. - write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna. -#endif -#endif - - bAntennaSwitched = true; - break; - - default: - printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip); - break; - } - break; - - case 1: - switch(priv->rf_chip) - { - case RF_ZEBRA2: - case RF_ZEBRA4: -#ifdef CONFIG_RTL8185B -#ifdef CONFIG_RTL818X_S - // Mac register, aux antenna - write_nic_byte(dev, ANTSEL, 0x00); - //base band - write_phy_cck(dev, 0x11, 0xbb); // Config CCK RX antenna. - write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna. -#else - // Mac register, aux antenna - write_nic_byte(dev, ANTSEL, 0x00); - //base band - write_phy_cck(dev, 0x10, 0xbb); // Config CCK RX antenna. - write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna. -#endif -#endif - - bAntennaSwitched = true; - break; - - default: - printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip); - break; - } - break; - - default: - printk("SetAntenna8185: unkown u1bAntennaIndex(%d)\n", u1bAntennaIndex); - break; - } - - if(bAntennaSwitched) - { - priv->CurrAntennaIndex = u1bAntennaIndex; - } - -// printk("-SetAntenna8185(): return (%#X)\n", bAntennaSwitched); - - return bAntennaSwitched; -} -// -// Description: -// Toggle Antenna switch. -// -bool -SwitchAntenna( - struct net_device *dev - ) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - - bool bResult; - - if(priv->CurrAntennaIndex == 0) - { -#if 0//lzm del 080826 -//by amy 080312 -#ifdef CONFIG_RTL818X_S - if(priv->bSwAntennaDiverity) - bResult = SetAntennaConfig87SE(dev, 1, true); - else -#endif -#endif - bResult = SetAntenna8185(dev, 1); -//by amy 080312 -// printk("SwitchAntenna(): switching to antenna 1 ......\n"); -// bResult = SetAntenna8185(dev, 1);//-by amy 080312 - } - else - { -#if 0//lzm del 080826 -//by amy 080312 -#ifdef CONFIG_RTL818X_S - if(priv->bSwAntennaDiverity) - bResult = SetAntennaConfig87SE(dev, 0, true); - else -#endif -#endif - bResult = SetAntenna8185(dev, 0); -//by amy 080312 -// printk("SwitchAntenna(): switching to antenna 0 ......\n"); -// bResult = SetAntenna8185(dev, 0);//-by amy 080312 - } - - return bResult; -} -// -// Description: -// Engine of SW Antenna Diversity mechanism. -// Since 8187 has no Tx part information, -// this implementation is only dependend on Rx part information. -// -// 2006.04.17, by rcnjko. -// -void -SwAntennaDiversity( - struct net_device *dev - ) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - bool bSwCheckSS=false; -// printk("+SwAntennaDiversity(): CurrAntennaIndex: %d\n", priv->CurrAntennaIndex); -// printk("AdTickCount is %d\n",priv->AdTickCount); -//by amy 080312 - if(bSwCheckSS) - { - priv->AdTickCount++; - - printk("(1) AdTickCount: %d, AdCheckPeriod: %d\n", - priv->AdTickCount, priv->AdCheckPeriod); - printk("(2) AdRxSignalStrength: %ld, AdRxSsThreshold: %ld\n", - priv->AdRxSignalStrength, priv->AdRxSsThreshold); - } -// priv->AdTickCount++;//-by amy 080312 - - // Case 1. No Link. - if(priv->ieee80211->state != IEEE80211_LINKED) - { - // printk("SwAntennaDiversity(): Case 1. No Link.\n"); - - priv->bAdSwitchedChecking = false; - // I switch antenna here to prevent any one of antenna is broken before link established, 2006.04.18, by rcnjko.. - SwitchAntenna(dev); - } - // Case 2. Linked but no packet received. - else if(priv->AdRxOkCnt == 0) - { - // printk("SwAntennaDiversity(): Case 2. Linked but no packet received.\n"); - - priv->bAdSwitchedChecking = false; - SwitchAntenna(dev); - } - // Case 3. Evaluate last antenna switch action and undo it if necessary. - else if(priv->bAdSwitchedChecking == true) - { - // printk("SwAntennaDiversity(): Case 3. Evaluate last antenna switch action.\n"); - - priv->bAdSwitchedChecking = false; - - // Adjust Rx signal strength threashold. - priv->AdRxSsThreshold = (priv->AdRxSignalStrength + priv->AdRxSsBeforeSwitched) / 2; - - priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ? - priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold; - if(priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched) - { // Rx signal strength is not improved after we swtiched antenna. => Swich back. -// printk("SwAntennaDiversity(): Rx Signal Strength is not improved, CurrRxSs: %d, LastRxSs: %d\n", -// priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched); -//by amy 080312 - // Increase Antenna Diversity checking period due to bad decision. - priv->AdCheckPeriod *= 2; -//by amy 080312 - // Increase Antenna Diversity checking period. - if(priv->AdCheckPeriod > priv->AdMaxCheckPeriod) - priv->AdCheckPeriod = priv->AdMaxCheckPeriod; - - // Wrong deceision => switch back. - SwitchAntenna(dev); - } - else - { // Rx Signal Strength is improved. -// printk("SwAntennaDiversity(): Rx Signal Strength is improved, CurrRxSs: %d, LastRxSs: %d\n", -// priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched); - - // Reset Antenna Diversity checking period to its min value. - priv->AdCheckPeriod = priv->AdMinCheckPeriod; - } - -// printk("SwAntennaDiversity(): AdRxSsThreshold: %d, AdCheckPeriod: %d\n", -// priv->AdRxSsThreshold, priv->AdCheckPeriod); - } - // Case 4. Evaluate if we shall switch antenna now. - // Cause Table Speed is very fast in TRC Dell Lab, we check it every time. - else// if(priv->AdTickCount >= priv->AdCheckPeriod)//-by amy 080312 - { -// printk("SwAntennaDiversity(): Case 4. Evaluate if we shall switch antenna now.\n"); - - priv->AdTickCount = 0; - - // - // We evaluate RxOk counts for each antenna first and than - // evaluate signal strength. - // The following operation can overcome the disability of CCA on both two antennas - // When signal strength was extremely low or high. - // 2008.01.30. - // - - // - // Evaluate RxOk count from each antenna if we shall switch default antenna now. - // Added by Roger, 2008.02.21. -//{by amy 080312 - if((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt) - && (priv->CurrAntennaIndex == 0)) - { // We set Main antenna as default but RxOk count was less than Aux ones. - - // printk("SwAntennaDiversity(): Main antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", - // priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt); - - // Switch to Aux antenna. - SwitchAntenna(dev); - priv->bHWAdSwitched = true; - } - else if((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt) - && (priv->CurrAntennaIndex == 1)) - { // We set Aux antenna as default but RxOk count was less than Main ones. - - // printk("SwAntennaDiversity(): Aux antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", - // priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt); - - // Switch to Main antenna. - SwitchAntenna(dev); - priv->bHWAdSwitched = true; - } - else - {// Default antenna is better. - - // printk("SwAntennaDiversity(): Default antenna is better., AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", - // priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt); - - // Still need to check current signal strength. - priv->bHWAdSwitched = false; - } - // - // We evaluate Rx signal strength ONLY when default antenna - // didn't changed by HW evaluation. - // 2008.02.27. - // - // [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05 - // For example, Throughput of aux is better than main antenna(about 10M v.s 2M), - // but AdRxSignalStrength is less than main. - // Our guess is that main antenna have lower throughput and get many change - // to receive more CCK packets(ex.Beacon) which have stronger SignalStrength. - // - if( (!priv->bHWAdSwitched) && (bSwCheckSS)) - { -//by amy 080312} - // Evaluate Rx signal strength if we shall switch antenna now. - if(priv->AdRxSignalStrength < priv->AdRxSsThreshold) - { // Rx signal strength is weak => Switch Antenna. -// printk("SwAntennaDiversity(): Rx Signal Strength is weak, CurrRxSs: %d, RxSsThreshold: %d\n", -// priv->AdRxSignalStrength, priv->AdRxSsThreshold); - - priv->AdRxSsBeforeSwitched = priv->AdRxSignalStrength; - priv->bAdSwitchedChecking = true; - - SwitchAntenna(dev); - } - else - { // Rx signal strength is OK. -// printk("SwAntennaDiversity(): Rx Signal Strength is OK, CurrRxSs: %d, RxSsThreshold: %d\n", -// priv->AdRxSignalStrength, priv->AdRxSsThreshold); - - priv->bAdSwitchedChecking = false; - // Increase Rx signal strength threashold if necessary. - if( (priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && // Signal is much stronger than current threshold - priv->AdRxSsThreshold <= priv->AdMaxRxSsThreshold) // Current threhold is not yet reach upper limit. - { - priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2; - priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ? - priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;//+by amy 080312 - } - - // Reduce Antenna Diversity checking period if possible. - if( priv->AdCheckPeriod > priv->AdMinCheckPeriod ) - { - priv->AdCheckPeriod /= 2; - } - } - } - } -//by amy 080312 - // Reset antenna diversity Rx related statistics. - priv->AdRxOkCnt = 0; - priv->AdMainAntennaRxOkCnt = 0; - priv->AdAuxAntennaRxOkCnt = 0; -//by amy 080312 - -// priv->AdRxOkCnt = 0;//-by amy 080312 - -// printk("-SwAntennaDiversity()\n"); -} - -// -// Description: -// Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. -// -bool -CheckTxPwrTracking( struct net_device *dev) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - - if(!priv->bTxPowerTrack) - { - return false; - } - -//lzm reserved 080826 - //if(priv->bScanInProgress) - //{ - // return false; - //} - - //if 87SE is in High Power , don't do Tx Power Tracking. asked by SD3 ED. 2008-08-08 Isaiah - if(priv->bToUpdateTxPwr) - { - return false; - } - - return true; -} - - -// -// Description: -// Timer callback function of SW Antenna Diversity. -// -void -SwAntennaDiversityTimerCallback( - struct net_device *dev - ) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - RT_RF_POWER_STATE rtState; - - //printk("+SwAntennaDiversityTimerCallback()\n"); - - // - // We do NOT need to switch antenna while RF is off. - // 2007.05.09, added by Roger. - // - rtState = priv->eRFPowerState; - do{ - if (rtState == eRfOff) - { -// printk("SwAntennaDiversityTimer - RF is OFF.\n"); - break; - } - else if (rtState == eRfSleep) - { - // Don't access BB/RF under Disable PLL situation. - //RT_TRACE((COMP_RF|COMP_ANTENNA), DBG_LOUD, ("SwAntennaDiversityTimerCallback(): RF is Sleep => skip it\n")); - break; - } - SwAntennaDiversity(dev); - - }while(false); - - if(priv->up) - { - priv->SwAntennaDiversityTimer.expires = jiffies + MSECS(ANTENNA_DIVERSITY_TIMER_PERIOD); - add_timer(&priv->SwAntennaDiversityTimer); - } - - //printk("-SwAntennaDiversityTimerCallback()\n"); -} - +//#include "r8180.h" +#include "r8180_dm.h" +#include "r8180_hw.h" +#include "r8180_93cx6.h" +//{by amy 080312 + +// +// Description: +// Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. +// +//+by amy 080312 +#define RATE_ADAPTIVE_TIMER_PERIOD 300 + +bool CheckHighPower(struct net_device *dev) +{ + struct r8180_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; + + if(!priv->bRegHighPowerMechanism) + { + return false; + } + + if(ieee->state == IEEE80211_LINKED_SCANNING) + { + return false; + } + + return true; +} + +// +// Description: +// Update Tx power level if necessary. +// See also DoRxHighPower() and SetTxPowerLevel8185() for reference. +// +// Note: +// The reason why we udpate Tx power level here instead of DoRxHighPower() +// is the number of IO to change Tx power is much more than chane TR switch +// and they are related to OFDM and MAC registers. +// So, we don't want to update it so frequently in per-Rx packet base. +// +void +DoTxHighPower( + struct net_device *dev + ) +{ + struct r8180_priv *priv = ieee80211_priv(dev); + u16 HiPwrUpperTh = 0; + u16 HiPwrLowerTh = 0; + u8 RSSIHiPwrUpperTh; + u8 RSSIHiPwrLowerTh; + u8 u1bTmp; + char OfdmTxPwrIdx, CckTxPwrIdx; + + //printk("----> DoTxHighPower()\n"); + + HiPwrUpperTh = priv->RegHiPwrUpperTh; + HiPwrLowerTh = priv->RegHiPwrLowerTh; + + HiPwrUpperTh = HiPwrUpperTh * 10; + HiPwrLowerTh = HiPwrLowerTh * 10; + RSSIHiPwrUpperTh = priv->RegRSSIHiPwrUpperTh; + RSSIHiPwrLowerTh = priv->RegRSSIHiPwrLowerTh; + + //lzm add 080826 + OfdmTxPwrIdx = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel]; + CckTxPwrIdx = priv->chtxpwr[priv->ieee80211->current_network.channel]; + + // printk("DoTxHighPower() - UndecoratedSmoothedSS:%d, CurCCKRSSI = %d , bCurCCKPkt= %d \n", priv->UndecoratedSmoothedSS, priv->CurCCKRSSI, priv->bCurCCKPkt ); + + if((priv->UndecoratedSmoothedSS > HiPwrUpperTh) || + (priv->bCurCCKPkt && (priv->CurCCKRSSI > RSSIHiPwrUpperTh))) + { + // Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah + + // printk("=====>DoTxHighPower() - High Power - UndecoratedSmoothedSS:%d, HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrUpperTh ); + priv->bToUpdateTxPwr = true; + u1bTmp= read_nic_byte(dev, CCK_TXAGC); + + // If it never enter High Power. + if( CckTxPwrIdx == u1bTmp) + { + u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0; // 8dbm + write_nic_byte(dev, CCK_TXAGC, u1bTmp); + + u1bTmp= read_nic_byte(dev, OFDM_TXAGC); + u1bTmp = (u1bTmp > 16) ? (u1bTmp -16): 0; // 8dbm + write_nic_byte(dev, OFDM_TXAGC, u1bTmp); + } + + } + else if((priv->UndecoratedSmoothedSS < HiPwrLowerTh) && + (!priv->bCurCCKPkt || priv->CurCCKRSSI < RSSIHiPwrLowerTh)) + { + // printk("DoTxHighPower() - lower Power - UndecoratedSmoothedSS:%d, HiPwrUpperTh = %d \n", priv->UndecoratedSmoothedSS, HiPwrLowerTh ); + if(priv->bToUpdateTxPwr) + { + priv->bToUpdateTxPwr = false; + //SD3 required. + u1bTmp= read_nic_byte(dev, CCK_TXAGC); + if(u1bTmp < CckTxPwrIdx) + { + //u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16); // 8dbm + //write_nic_byte(dev, CCK_TXAGC, u1bTmp); + write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx); + } + + u1bTmp= read_nic_byte(dev, OFDM_TXAGC); + if(u1bTmp < OfdmTxPwrIdx) + { + //u1bTmp = ((u1bTmp+16) > 35) ? 35: (u1bTmp+16); // 8dbm + //write_nic_byte(dev, OFDM_TXAGC, u1bTmp); + write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx); + } + } + } + + //printk("<---- DoTxHighPower()\n"); +} + + +// +// Description: +// Callback function of UpdateTxPowerWorkItem. +// Because of some event happend, e.g. CCX TPC, High Power Mechanism, +// We update Tx power of current channel again. +// +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) +void rtl8180_tx_pw_wq (struct work_struct *work) +{ +// struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq); +// struct ieee80211_device * ieee = (struct ieee80211_device*) +// container_of(work, struct ieee80211_device, watch_dog_wq); + struct delayed_work *dwork = container_of(work,struct delayed_work,work); + struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,tx_pw_wq); + struct net_device *dev = ieee->dev; +#else +void rtl8180_tx_pw_wq(struct net_device *dev) +{ + // struct r8180_priv *priv = ieee80211_priv(dev); +#endif + +// printk("----> UpdateTxPowerWorkItemCallback()\n"); + + DoTxHighPower(dev); + +// printk("<---- UpdateTxPowerWorkItemCallback()\n"); +} + + +// +// Description: +// Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise. +// +bool +CheckDig( + struct net_device *dev + ) +{ + struct r8180_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; + + if(!priv->bDigMechanism) + return false; + + if(ieee->state != IEEE80211_LINKED) + return false; + + //if(priv->CurrentOperaRate < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01. + if((priv->ieee80211->rate/5) < 36) // Schedule Dig under all OFDM rates. By Bruce, 2007-06-01. + return false; + return true; +} +// +// Description: +// Implementation of DIG for Zebra and Zebra2. +// +void +DIG_Zebra( + struct net_device *dev + ) +{ + struct r8180_priv *priv = ieee80211_priv(dev); + u16 CCKFalseAlarm, OFDMFalseAlarm; + u16 OfdmFA1, OfdmFA2; + int InitialGainStep = 7; // The number of initial gain stages. + int LowestGainStage = 4; // The capable lowest stage of performing dig workitem. + u32 AwakePeriodIn2Sec=0; + + //printk("---------> DIG_Zebra()\n"); + + CCKFalseAlarm = (u16)(priv->FalseAlarmRegValue & 0x0000ffff); + OFDMFalseAlarm = (u16)((priv->FalseAlarmRegValue >> 16) & 0x0000ffff); + OfdmFA1 = 0x15; + OfdmFA2 = ((u16)(priv->RegDigOfdmFaUpTh)) << 8; + +// printk("DIG**********CCK False Alarm: %#X \n",CCKFalseAlarm); +// printk("DIG**********OFDM False Alarm: %#X \n",OFDMFalseAlarm); + + // The number of initial gain steps is different, by Bruce, 2007-04-13. + if (priv->InitialGain == 0 ) //autoDIG + { // Advised from SD3 DZ + priv->InitialGain = 4; // In 87B, m74dBm means State 4 (m82dBm) + } + //if(pHalData->VersionID != VERSION_8187B_B) + { // Advised from SD3 DZ + OfdmFA1 = 0x20; + } + +#if 1 //lzm reserved 080826 + AwakePeriodIn2Sec = (2000-priv ->DozePeriodInPast2Sec); + //printk("&&& DozePeriod=%d AwakePeriod=%d\n", priv->DozePeriodInPast2Sec, AwakePeriodIn2Sec); + priv ->DozePeriodInPast2Sec=0; + + if(AwakePeriodIn2Sec) + { + //RT_TRACE(COMP_DIG, DBG_TRACE, ("DIG: AwakePeriodIn2Sec(%d) - FATh(0x%X , 0x%X) ->",AwakePeriodIn2Sec, OfdmFA1, OfdmFA2)); + // adjuest DIG threshold. + OfdmFA1 = (u16)((OfdmFA1*AwakePeriodIn2Sec) / 2000) ; + OfdmFA2 = (u16)((OfdmFA2*AwakePeriodIn2Sec) / 2000) ; + //RT_TRACE(COMP_DIG, DBG_TRACE, ("( 0x%X , 0x%X)\n", OfdmFA1, OfdmFA2)); + } + else + { + ;//RT_TRACE(COMP_DIG, DBG_WARNING, ("ERROR!! AwakePeriodIn2Sec should not be ZERO!!\n")); + } +#endif + + InitialGainStep = 8; + LowestGainStage = priv->RegBModeGainStage; // Lowest gain stage. + + if (OFDMFalseAlarm > OfdmFA1) + { + if (OFDMFalseAlarm > OfdmFA2) + { + priv->DIG_NumberFallbackVote++; + if (priv->DIG_NumberFallbackVote >1) + { + //serious OFDM False Alarm, need fallback + if (priv->InitialGain < InitialGainStep) + { + priv->InitialGainBackUp= priv->InitialGain; + + priv->InitialGain = (priv->InitialGain + 1); +// printk("DIG**********OFDM False Alarm: %#X, OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2); +// printk("DIG+++++++ fallback OFDM:%d \n", priv->InitialGain); + UpdateInitialGain(dev); + } + priv->DIG_NumberFallbackVote = 0; + priv->DIG_NumberUpgradeVote=0; + } + } + else + { + if (priv->DIG_NumberFallbackVote) + priv->DIG_NumberFallbackVote--; + } + priv->DIG_NumberUpgradeVote=0; + } + else + { + if (priv->DIG_NumberFallbackVote) + priv->DIG_NumberFallbackVote--; + priv->DIG_NumberUpgradeVote++; + + if (priv->DIG_NumberUpgradeVote>9) + { + if (priv->InitialGain > LowestGainStage) // In 87B, m78dBm means State 4 (m864dBm) + { + priv->InitialGainBackUp= priv->InitialGain; + + priv->InitialGain = (priv->InitialGain - 1); +// printk("DIG**********OFDM False Alarm: %#X, OfdmFA1: %#X, OfdmFA2: %#X\n", OFDMFalseAlarm, OfdmFA1, OfdmFA2); +// printk("DIG--------- Upgrade OFDM:%d \n", priv->InitialGain); + UpdateInitialGain(dev); + } + priv->DIG_NumberFallbackVote = 0; + priv->DIG_NumberUpgradeVote=0; + } + } + +// printk("DIG+++++++ OFDM:%d\n", priv->InitialGain); + //printk("<--------- DIG_Zebra()\n"); +} + +// +// Description: +// Dispatch DIG implementation according to RF. +// +void +DynamicInitGain( + struct net_device *dev + ) +{ + struct r8180_priv *priv = ieee80211_priv(dev); + + switch(priv->rf_chip) + { + case RF_ZEBRA2: // [AnnieWorkaround] For Zebra2, 2005-08-01. + case RF_ZEBRA4: + DIG_Zebra( dev ); + break; + + default: + printk("DynamicInitGain(): unknown RFChipID(%d) !!!\n", priv->rf_chip); + break; + } +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) +void rtl8180_hw_dig_wq (struct work_struct *work) +{ +// struct r8180_priv *priv = container_of(work, struct r8180_priv, watch_dog_wq); +// struct ieee80211_device * ieee = (struct ieee80211_device*) +// container_of(work, struct ieee80211_device, watch_dog_wq); + struct delayed_work *dwork = container_of(work,struct delayed_work,work); + struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,hw_dig_wq); + struct net_device *dev = ieee->dev; +#else +void rtl8180_hw_dig_wq(struct net_device *dev) +{ + +#endif + struct r8180_priv *priv = ieee80211_priv(dev); + + // Read CCK and OFDM False Alarm. + priv->FalseAlarmRegValue = read_nic_dword(dev, CCK_FALSE_ALARM); + + + // Adjust Initial Gain dynamically. + DynamicInitGain(dev); + +} + +int +IncludedInSupportedRates( + struct r8180_priv *priv, + u8 TxRate ) +{ + u8 rate_len; + u8 rate_ex_len; + u8 RateMask = 0x7F; + u8 idx; + unsigned short Found = 0; + u8 NaiveTxRate = TxRate&RateMask; + + rate_len = priv->ieee80211->current_network.rates_len; + rate_ex_len = priv->ieee80211->current_network.rates_ex_len; + for( idx=0; idx< rate_len; idx++ ) + { + if( (priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate ) + { + Found = 1; + goto found_rate; + } + } + for( idx=0; idx< rate_ex_len; idx++ ) + { + if( (priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate ) + { + Found = 1; + goto found_rate; + } + } + return Found; + found_rate: + return Found; +} + +// +// Description: +// Get the Tx rate one degree up form the input rate in the supported rates. +// Return the upgrade rate if it is successed, otherwise return the input rate. +// By Bruce, 2007-06-05. +// +u8 +GetUpgradeTxRate( + struct net_device *dev, + u8 rate + ) +{ + struct r8180_priv *priv = ieee80211_priv(dev); + u8 UpRate; + + // Upgrade 1 degree. + switch(rate) + { + case 108: // Up to 54Mbps. + UpRate = 108; + break; + + case 96: // Up to 54Mbps. + UpRate = 108; + break; + + case 72: // Up to 48Mbps. + UpRate = 96; + break; + + case 48: // Up to 36Mbps. + UpRate = 72; + break; + + case 36: // Up to 24Mbps. + UpRate = 48; + break; + + case 22: // Up to 18Mbps. + UpRate = 36; + break; + + case 11: // Up to 11Mbps. + UpRate = 22; + break; + + case 4: // Up to 5.5Mbps. + UpRate = 11; + break; + + case 2: // Up to 2Mbps. + UpRate = 4; + break; + + default: + printk("GetUpgradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate); + return rate; + } + // Check if the rate is valid. + if(IncludedInSupportedRates(priv, UpRate)) + { +// printk("GetUpgradeTxRate(): GetUpgrade Tx rate(%d) from %d !\n", UpRate, priv->CurrentOperaRate); + return UpRate; + } + else + { + //printk("GetUpgradeTxRate(): Tx rate (%d) is not in supported rates\n", UpRate); + return rate; + } + return rate; +} +// +// Description: +// Get the Tx rate one degree down form the input rate in the supported rates. +// Return the degrade rate if it is successed, otherwise return the input rate. +// By Bruce, 2007-06-05. +// +u8 +GetDegradeTxRate( + struct net_device *dev, + u8 rate + ) +{ + struct r8180_priv *priv = ieee80211_priv(dev); + u8 DownRate; + + // Upgrade 1 degree. + switch(rate) + { + case 108: // Down to 48Mbps. + DownRate = 96; + break; + + case 96: // Down to 36Mbps. + DownRate = 72; + break; + + case 72: // Down to 24Mbps. + DownRate = 48; + break; + + case 48: // Down to 18Mbps. + DownRate = 36; + break; + + case 36: // Down to 11Mbps. + DownRate = 22; + break; + + case 22: // Down to 5.5Mbps. + DownRate = 11; + break; + + case 11: // Down to 2Mbps. + DownRate = 4; + break; + + case 4: // Down to 1Mbps. + DownRate = 2; + break; + + case 2: // Down to 1Mbps. + DownRate = 2; + break; + + default: + printk("GetDegradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate); + return rate; + } + // Check if the rate is valid. + if(IncludedInSupportedRates(priv, DownRate)) + { +// printk("GetDegradeTxRate(): GetDegrade Tx rate(%d) from %d!\n", DownRate, priv->CurrentOperaRate); + return DownRate; + } + else + { + //printk("GetDegradeTxRate(): Tx rate (%d) is not in supported rates\n", DownRate); + return rate; + } + return rate; +} +// +// Helper function to determine if specified data rate is +// CCK rate. +// 2005.01.25, by rcnjko. +// +bool +MgntIsCckRate( + u16 rate + ) +{ + bool bReturn = false; + + if((rate <= 22) && (rate != 12) && (rate != 18)) + { + bReturn = true; + } + + return bReturn; +} +#ifdef CONFIG_RTL818X_S +// +// Description: +// Tx Power tracking mechanism routine on 87SE. +// Created by Roger, 2007.12.11. +// +void +TxPwrTracking87SE( + struct net_device *dev +) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + u8 tmpu1Byte, CurrentThermal, Idx; + char CckTxPwrIdx, OfdmTxPwrIdx; + //u32 u4bRfReg; + + tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL); + CurrentThermal = (tmpu1Byte & 0xf0)>>4; //[ 7:4]: thermal meter indication. + CurrentThermal = (CurrentThermal>0x0c)? 0x0c:CurrentThermal;//lzm add 080826 + + //printk("TxPwrTracking87SE(): CurrentThermal(%d)\n", CurrentThermal); + + if( CurrentThermal != priv->ThermalMeter) + { +// printk("TxPwrTracking87SE(): Thermal meter changed!!!\n"); + + // Update Tx Power level on each channel. + for(Idx = 1; Idx<15; Idx++) + { + CckTxPwrIdx = priv->chtxpwr[Idx]; + OfdmTxPwrIdx = priv->chtxpwr_ofdm[Idx]; + + if( CurrentThermal > priv->ThermalMeter ) + { // higher thermal meter. + CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2; + OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter)*2; + + if(CckTxPwrIdx >35) + CckTxPwrIdx = 35; // Force TxPower to maximal index. + if(OfdmTxPwrIdx >35) + OfdmTxPwrIdx = 35; + } + else + { // lower thermal meter. + CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2; + OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal)*2; + + if(CckTxPwrIdx <0) + CckTxPwrIdx = 0; + if(OfdmTxPwrIdx <0) + OfdmTxPwrIdx = 0; + } + + // Update TxPower level on CCK and OFDM resp. + priv->chtxpwr[Idx] = CckTxPwrIdx; + priv->chtxpwr_ofdm[Idx] = OfdmTxPwrIdx; + } + + // Update TxPower level immediately. + rtl8225z2_SetTXPowerLevel(dev, priv->ieee80211->current_network.channel); + } + priv->ThermalMeter = CurrentThermal; +} +void +StaRateAdaptive87SE( + struct net_device *dev + ) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + unsigned long CurrTxokCnt; + u16 CurrRetryCnt; + u16 CurrRetryRate; + //u16 i,idx; + unsigned long CurrRxokCnt; + bool bTryUp = false; + bool bTryDown = false; + u8 TryUpTh = 1; + u8 TryDownTh = 2; + u32 TxThroughput; + long CurrSignalStrength; + bool bUpdateInitialGain = false; + u8 u1bOfdm=0, u1bCck = 0; + char OfdmTxPwrIdx, CckTxPwrIdx; + + priv->RateAdaptivePeriod= RATE_ADAPTIVE_TIMER_PERIOD; + + + CurrRetryCnt = priv->CurrRetryCnt; + CurrTxokCnt = priv->NumTxOkTotal - priv->LastTxokCnt; + CurrRxokCnt = priv->ieee80211->NumRxOkTotal - priv->LastRxokCnt; + CurrSignalStrength = priv->Stats_RecvSignalPower; + TxThroughput = (u32)(priv->NumTxOkBytesTotal - priv->LastTxOKBytes); + priv->LastTxOKBytes = priv->NumTxOkBytesTotal; + priv->CurrentOperaRate = priv->ieee80211->rate/5; + //printk("priv->CurrentOperaRate is %d\n",priv->CurrentOperaRate); + //2 Compute retry ratio. + if (CurrTxokCnt>0) + { + CurrRetryRate = (u16)(CurrRetryCnt*100/CurrTxokCnt); + } + else + { // It may be serious retry. To distinguish serious retry or no packets modified by Bruce + CurrRetryRate = (u16)(CurrRetryCnt*100/1); + } + + + // + // Added by Roger, 2007.01.02. + // For debug information. + // + //printk("\n(1) pHalData->LastRetryRate: %d \n",priv->LastRetryRate); + //printk("(2) RetryCnt = %d \n", CurrRetryCnt); + //printk("(3) TxokCnt = %d \n", CurrTxokCnt); + //printk("(4) CurrRetryRate = %d \n", CurrRetryRate); + //printk("(5) CurrSignalStrength = %d \n",CurrSignalStrength); + //printk("(6) TxThroughput is %d\n",TxThroughput); + //printk("priv->NumTxOkBytesTotal is %d\n",priv->NumTxOkBytesTotal); + + priv->LastRetryCnt = priv->CurrRetryCnt; + priv->LastTxokCnt = priv->NumTxOkTotal; + priv->LastRxokCnt = priv->ieee80211->NumRxOkTotal; + priv->CurrRetryCnt = 0; + + //2No Tx packets, return to init_rate or not? + if (CurrRetryRate==0 && CurrTxokCnt == 0) + { + // + //After 9 (30*300ms) seconds in this condition, we try to raise rate. + // + priv->TryupingCountNoData++; + +// printk("No Tx packets, TryupingCountNoData(%d)\n", priv->TryupingCountNoData); + //[TRC Dell Lab] Extend raised period from 4.5sec to 9sec, Isaiah 2008-02-15 18:00 + if (priv->TryupingCountNoData>30) + { + priv->TryupingCountNoData = 0; + priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate); + // Reset Fail Record + priv->LastFailTxRate = 0; + priv->LastFailTxRateSS = -200; + priv->FailTxRateCount = 0; + } + goto SetInitialGain; + } + else + { + priv->TryupingCountNoData=0; //Reset trying up times. + } + + + // + // For Netgear case, I comment out the following signal strength estimation, + // which can results in lower rate to transmit when sample is NOT enough (e.g. PING request). + // 2007.04.09, by Roger. + // + + // + // Restructure rate adaptive as the following main stages: + // (1) Add retry threshold in 54M upgrading condition with signal strength. + // (2) Add the mechanism to degrade to CCK rate according to signal strength + // and retry rate. + // (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated + // situation, Initial Gain Update is upon on DIG mechanism except CCK rate. + // (4) Add the mehanism of trying to upgrade tx rate. + // (5) Record the information of upping tx rate to avoid trying upping tx rate constantly. + // By Bruce, 2007-06-05. + // + // + + // 11Mbps or 36Mbps + // Check more times in these rate(key rates). + // + if(priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72) + { + TryUpTh += 9; + } + // + // Let these rates down more difficult. + // + if(MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36) + { + TryDownTh += 1; + } + + //1 Adjust Rate. + if (priv->bTryuping == true) + { + //2 For Test Upgrading mechanism + // Note: + // Sometimes the throughput is upon on the capability bwtween the AP and NIC, + // thus the low data rate does not improve the performance. + // We randomly upgrade the data rate and check if the retry rate is improved. + + // Upgrading rate did not improve the retry rate, fallback to the original rate. + if ( (CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput) + { + //Not necessary raising rate, fall back rate. + bTryDown = true; + //printk("case1-1: Not necessary raising rate, fall back rate....\n"); + //printk("case1-1: pMgntInfo->CurrentOperaRate =%d, TxThroughput = %d, LastThroughput = %d\n", + // priv->CurrentOperaRate, TxThroughput, priv->LastTxThroughput); + } + else + { + priv->bTryuping = false; + } + } + else if (CurrSignalStrength > -47 && (CurrRetryRate < 50)) + { + //2For High Power + // + // Added by Roger, 2007.04.09. + // Return to highest data rate, if signal strength is good enough. + // SignalStrength threshold(-50dbm) is for RTL8186. + // Revise SignalStrength threshold to -51dbm. + // + // Also need to check retry rate for safety, by Bruce, 2007-06-05. + if(priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate ) + { + bTryUp = true; + // Upgrade Tx Rate directly. + priv->TryupingCount += TryUpTh; + } +// printk("case2: StaRateAdaptive87SE: Power(%d) is high enough!!. \n", CurrSignalStrength); + + } + else if(CurrTxokCnt > 9 && CurrTxokCnt< 100 && CurrRetryRate >= 600) + { + //2 For Serious Retry + // + // Traffic is not busy but our Tx retry is serious. + // + bTryDown = true; + // Let Rate Mechanism to degrade tx rate directly. + priv->TryDownCountLowData += TryDownTh; +// printk("case3: RA: Tx Retry is serious. Degrade Tx Rate to %d directly...\n", priv->CurrentOperaRate); + } + else if ( priv->CurrentOperaRate == 108 ) + { + //2For 54Mbps + // Air Link + if ( (CurrRetryRate>26)&&(priv->LastRetryRate>25)) +// if ( (CurrRetryRate>40)&&(priv->LastRetryRate>39)) + { + //Down to rate 48Mbps. + bTryDown = true; + } + // Cable Link + else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72)) +// else if ( (CurrRetryRate>17)&&(priv->LastRetryRate>16) && (CurrSignalStrength > -72)) + { + //Down to rate 48Mbps. + bTryDown = true; + } + + if(bTryDown && (CurrSignalStrength < -75)) //cable link + { + priv->TryDownCountLowData += TryDownTh; + } + //printk("case4---54M \n"); + + } + else if ( priv->CurrentOperaRate == 96 ) + { + //2For 48Mbps + //Air Link + if ( ((CurrRetryRate>48) && (priv->LastRetryRate>47))) +// if ( ((CurrRetryRate>65) && (priv->LastRetryRate>64))) + + { + //Down to rate 36Mbps. + bTryDown = true; + } + //Cable Link + else if ( ((CurrRetryRate>21) && (priv->LastRetryRate>20)) && (CurrSignalStrength > -74)) + { + //Down to rate 36Mbps. + bTryDown = true; + } + else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) +// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) + { + bTryDown = true; + priv->TryDownCountLowData += TryDownTh; + } + else if ( (CurrRetryRate<8) && (priv->LastRetryRate<8) ) //TO DO: need to consider (RSSI) +// else if ( (CurrRetryRate<28) && (priv->LastRetryRate<8) ) + { + bTryUp = true; + } + + if(bTryDown && (CurrSignalStrength < -75)) + { + priv->TryDownCountLowData += TryDownTh; + } + //printk("case5---48M \n"); + } + else if ( priv->CurrentOperaRate == 72 ) + { + //2For 36Mbps + if ( (CurrRetryRate>43) && (priv->LastRetryRate>41)) +// if ( (CurrRetryRate>60) && (priv->LastRetryRate>59)) + { + //Down to rate 24Mbps. + bTryDown = true; + } + else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) +// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) + { + bTryDown = true; + priv->TryDownCountLowData += TryDownTh; + } + else if ( (CurrRetryRate<15) && (priv->LastRetryRate<16)) //TO DO: need to consider (RSSI) +// else if ( (CurrRetryRate<35) && (priv->LastRetryRate<36)) + { + bTryUp = true; + } + + if(bTryDown && (CurrSignalStrength < -80)) + { + priv->TryDownCountLowData += TryDownTh; + } + //printk("case6---36M \n"); + } + else if ( priv->CurrentOperaRate == 48 ) + { + //2For 24Mbps + // Air Link + if ( ((CurrRetryRate>63) && (priv->LastRetryRate>62))) +// if ( ((CurrRetryRate>83) && (priv->LastRetryRate>82))) + { + //Down to rate 18Mbps. + bTryDown = true; + } + //Cable Link + else if ( ((CurrRetryRate>33) && (priv->LastRetryRate>32)) && (CurrSignalStrength > -82) ) +// else if ( ((CurrRetryRate>50) && (priv->LastRetryRate>49)) && (CurrSignalStrength > -82) ) + { + //Down to rate 18Mbps. + bTryDown = true; + } + else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) +// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) + + { + bTryDown = true; + priv->TryDownCountLowData += TryDownTh; + } + else if ( (CurrRetryRate<20) && (priv->LastRetryRate<21)) //TO DO: need to consider (RSSI) +// else if ( (CurrRetryRate<40) && (priv->LastRetryRate<41)) + { + bTryUp = true; + } + + if(bTryDown && (CurrSignalStrength < -82)) + { + priv->TryDownCountLowData += TryDownTh; + } + //printk("case7---24M \n"); + } + else if ( priv->CurrentOperaRate == 36 ) + { + //2For 18Mbps + // original (109, 109) + //[TRC Dell Lab] (90, 91), Isaiah 2008-02-18 23:24 + // (85, 86), Isaiah 2008-02-18 24:00 + if ( ((CurrRetryRate>85) && (priv->LastRetryRate>86))) +// if ( ((CurrRetryRate>115) && (priv->LastRetryRate>116))) + { + //Down to rate 11Mbps. + bTryDown = true; + } + //[TRC Dell Lab] Isaiah 2008-02-18 23:24 + else if((CurrRetryRate> (priv->LastRetryRate + 50 )) && (priv->FailTxRateCount >2 )) +// else if((CurrRetryRate> (priv->LastRetryRate + 70 )) && (priv->FailTxRateCount >2 )) + { + bTryDown = true; + priv->TryDownCountLowData += TryDownTh; + } + else if ( (CurrRetryRate<22) && (priv->LastRetryRate<23)) //TO DO: need to consider (RSSI) +// else if ( (CurrRetryRate<42) && (priv->LastRetryRate<43)) + { + bTryUp = true; + } + //printk("case8---18M \n"); + } + else if ( priv->CurrentOperaRate == 22 ) + { + //2For 11Mbps + if (CurrRetryRate>95) +// if (CurrRetryRate>155) + { + bTryDown = true; + } + else if ( (CurrRetryRate<29) && (priv->LastRetryRate <30) )//TO DO: need to consider (RSSI) +// else if ( (CurrRetryRate<49) && (priv->LastRetryRate <50) ) + { + bTryUp = true; + } + //printk("case9---11M \n"); + } + else if ( priv->CurrentOperaRate == 11 ) + { + //2For 5.5Mbps + if (CurrRetryRate>149) +// if (CurrRetryRate>189) + { + bTryDown = true; + } + else if ( (CurrRetryRate<60) && (priv->LastRetryRate < 65)) +// else if ( (CurrRetryRate<80) && (priv->LastRetryRate < 85)) + + { + bTryUp = true; + } + //printk("case10---5.5M \n"); + } + else if ( priv->CurrentOperaRate == 4 ) + { + //2For 2 Mbps + if((CurrRetryRate>99) && (priv->LastRetryRate>99)) +// if((CurrRetryRate>199) && (priv->LastRetryRate>199)) + { + bTryDown = true; + } + else if ( (CurrRetryRate < 65) && (priv->LastRetryRate < 70)) +// else if ( (CurrRetryRate < 85) && (priv->LastRetryRate < 90)) + { + bTryUp = true; + } + //printk("case11---2M \n"); + } + else if ( priv->CurrentOperaRate == 2 ) + { + //2For 1 Mbps + if( (CurrRetryRate<70) && (priv->LastRetryRate<75)) +// if( (CurrRetryRate<90) && (priv->LastRetryRate<95)) + { + bTryUp = true; + } + //printk("case12---1M \n"); + } + + if(bTryUp && bTryDown) + printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n"); + + //1 Test Upgrading Tx Rate + // Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC. + // To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate. + if(!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0) + && priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2) + { + if(jiffies% (CurrRetryRate + 101) == 0) + { + bTryUp = true; + priv->bTryuping = true; + //printk("StaRateAdaptive87SE(): Randomly try upgrading...\n"); + } + } + + //1 Rate Mechanism + if(bTryUp) + { + priv->TryupingCount++; + priv->TryDownCountLowData = 0; + + { +// printk("UP: pHalData->TryupingCount = %d\n", priv->TryupingCount); +// printk("UP: TryUpTh(%d)+ (FailTxRateCount(%d))^2 =%d\n", +// TryUpTh, priv->FailTxRateCount, (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount) ); +// printk("UP: pHalData->bTryuping=%d\n", priv->bTryuping); + + } + + // + // Check more times if we need to upgrade indeed. + // Because the largest value of pHalData->TryupingCount is 0xFFFF and + // the largest value of pHalData->FailTxRateCount is 0x14, + // this condition will be satisfied at most every 2 min. + // + + if((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) || + (CurrSignalStrength > priv->LastFailTxRateSS) || priv->bTryuping) + { + priv->TryupingCount = 0; + // + // When transfering from CCK to OFDM, DIG is an important issue. + // + if(priv->CurrentOperaRate == 22) + bUpdateInitialGain = true; + + // The difference in throughput between 48Mbps and 36Mbps is 8M. + // So, we must be carefully in this rate scale. Isaiah 2008-02-15. + // + if( ((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) && + (priv->FailTxRateCount > 2) ) + priv->RateAdaptivePeriod= (RATE_ADAPTIVE_TIMER_PERIOD/2); + + // (1)To avoid upgrade frequently to the fail tx rate, add the FailTxRateCount into the threshold. + // (2)If the signal strength is increased, it may be able to upgrade. + + priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate); +// printk("StaRateAdaptive87SE(): Upgrade Tx Rate to %d\n", priv->CurrentOperaRate); + + //[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00 + if(priv->CurrentOperaRate ==36) + { + priv->bUpdateARFR=true; + write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6 +// printk("UP: ARFR=0xF8F\n"); + } + else if(priv->bUpdateARFR) + { + priv->bUpdateARFR=false; + write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps. +// printk("UP: ARFR=0xFFF\n"); + } + + // Update Fail Tx rate and count. + if(priv->LastFailTxRate != priv->CurrentOperaRate) + { + priv->LastFailTxRate = priv->CurrentOperaRate; + priv->FailTxRateCount = 0; + priv->LastFailTxRateSS = -200; // Set lowest power. + } + } + } + else + { + if(priv->TryupingCount > 0) + priv->TryupingCount --; + } + + if(bTryDown) + { + priv->TryDownCountLowData++; + priv->TryupingCount = 0; + { +// printk("DN: pHalData->TryDownCountLowData = %d\n",priv->TryDownCountLowData); +// printk("DN: TryDownTh =%d\n", TryDownTh); +// printk("DN: pHalData->bTryuping=%d\n", priv->bTryuping); + } + + //Check if Tx rate can be degraded or Test trying upgrading should fallback. + if(priv->TryDownCountLowData > TryDownTh || priv->bTryuping) + { + priv->TryDownCountLowData = 0; + priv->bTryuping = false; + // Update fail information. + if(priv->LastFailTxRate == priv->CurrentOperaRate) + { + priv->FailTxRateCount ++; + // Record the Tx fail rate signal strength. + if(CurrSignalStrength > priv->LastFailTxRateSS) + { + priv->LastFailTxRateSS = CurrSignalStrength; + } + } + else + { + priv->LastFailTxRate = priv->CurrentOperaRate; + priv->FailTxRateCount = 1; + priv->LastFailTxRateSS = CurrSignalStrength; + } + priv->CurrentOperaRate = GetDegradeTxRate(dev, priv->CurrentOperaRate); + + // Reduce chariot training time at weak signal strength situation. SD3 ED demand. + //[TRC Dell Lab] Revise Signal Threshold from -75 to -80 , Isaiah 2008-02-18 20:00 + if( (CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72 )) + { + priv->CurrentOperaRate = 72; +// printk("DN: weak signal strength (%d), degrade to 36Mbps\n", CurrSignalStrength); + } + + //[TRC Dell Lab] Bypass 12/9/6, Isaiah 2008-02-18 20:00 + if(priv->CurrentOperaRate ==36) + { + priv->bUpdateARFR=true; + write_nic_word(dev, ARFR, 0x0F8F); //bypass 12/9/6 +// printk("DN: ARFR=0xF8F\n"); + } + else if(priv->bUpdateARFR) + { + priv->bUpdateARFR=false; + write_nic_word(dev, ARFR, 0x0FFF); //set 1M ~ 54Mbps. +// printk("DN: ARFR=0xFFF\n"); + } + + // + // When it is CCK rate, it may need to update initial gain to receive lower power packets. + // + if(MgntIsCckRate(priv->CurrentOperaRate)) + { + bUpdateInitialGain = true; + } +// printk("StaRateAdaptive87SE(): Degrade Tx Rate to %d\n", priv->CurrentOperaRate); + } + } + else + { + if(priv->TryDownCountLowData > 0) + priv->TryDownCountLowData --; + } + + // Keep the Tx fail rate count to equal to 0x15 at most. + // Reduce the fail count at least to 10 sec if tx rate is tending stable. + if(priv->FailTxRateCount >= 0x15 || + (!bTryUp && !bTryDown && priv->TryDownCountLowData == 0 && priv->TryupingCount && priv->FailTxRateCount > 0x6)) + { + priv->FailTxRateCount --; + } + + + OfdmTxPwrIdx = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel]; + CckTxPwrIdx = priv->chtxpwr[priv->ieee80211->current_network.channel]; + + //[TRC Dell Lab] Mac0x9e increase 2 level in 36M~18M situation, Isaiah 2008-02-18 24:00 + if((priv->CurrentOperaRate < 96) &&(priv->CurrentOperaRate > 22)) + { + u1bCck = read_nic_byte(dev, CCK_TXAGC); + u1bOfdm = read_nic_byte(dev, OFDM_TXAGC); + + // case 1: Never enter High power + if(u1bCck == CckTxPwrIdx ) + { + if(u1bOfdm != (OfdmTxPwrIdx+2) ) + { + priv->bEnhanceTxPwr= true; + u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2); + write_nic_byte(dev, OFDM_TXAGC, u1bOfdm); +// printk("Enhance OFDM_TXAGC : +++++ u1bOfdm= 0x%x\n", u1bOfdm); + } + } + // case 2: enter high power + else if(u1bCck < CckTxPwrIdx) + { + if(!priv->bEnhanceTxPwr) + { + priv->bEnhanceTxPwr= true; + u1bOfdm = ((u1bOfdm+2) > 35) ? 35: (u1bOfdm+2); + write_nic_byte(dev, OFDM_TXAGC, u1bOfdm); + //RT_TRACE(COMP_RATE, DBG_TRACE, ("Enhance OFDM_TXAGC(2) : +++++ u1bOfdm= 0x%x\n", u1bOfdm)); + } + } + } + else if(priv->bEnhanceTxPwr) //54/48/11/5.5/2/1 + { + u1bCck = read_nic_byte(dev, CCK_TXAGC); + u1bOfdm = read_nic_byte(dev, OFDM_TXAGC); + + // case 1: Never enter High power + if(u1bCck == CckTxPwrIdx ) + { + priv->bEnhanceTxPwr= false; + write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx); + //printk("Recover OFDM_TXAGC : ===== u1bOfdm= 0x%x\n", OfdmTxPwrIdx); + } + // case 2: enter high power + else if(u1bCck < CckTxPwrIdx) + { + priv->bEnhanceTxPwr= false; + u1bOfdm = ((u1bOfdm-2) > 0) ? (u1bOfdm-2): 0; + write_nic_byte(dev, OFDM_TXAGC, u1bOfdm); + //RT_TRACE(COMP_RATE, DBG_TRACE, ("Recover OFDM_TXAGC(2): ===== u1bOfdm= 0x%x\n", u1bOfdm)); + + } + } + + // + // We need update initial gain when we set tx rate "from OFDM to CCK" or + // "from CCK to OFDM". + // +SetInitialGain: + if(bUpdateInitialGain) + { + if(MgntIsCckRate(priv->CurrentOperaRate)) // CCK + { + if(priv->InitialGain > priv->RegBModeGainStage) + { + priv->InitialGainBackUp= priv->InitialGain; + + if(CurrSignalStrength < -85) // Low power, OFDM [0x17] = 26. + { + //SD3 SYs suggest that CurrSignalStrength < -65, ofdm 0x17=26. + priv->InitialGain = priv->RegBModeGainStage; + } + else if(priv->InitialGain > priv->RegBModeGainStage + 1) + { + priv->InitialGain -= 2; + } + else + { + priv->InitialGain --; + } + printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate); + UpdateInitialGain(dev); + } + } + else // OFDM + { + if(priv->InitialGain < 4) + { + priv->InitialGainBackUp= priv->InitialGain; + + priv->InitialGain ++; + printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n",priv->InitialGain, priv->CurrentOperaRate); + UpdateInitialGain(dev); + } + } + } + + //Record the related info + priv->LastRetryRate = CurrRetryRate; + priv->LastTxThroughput = TxThroughput; + priv->ieee80211->rate = priv->CurrentOperaRate * 5; +} + +#endif +#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20) +void rtl8180_rate_adapter(struct work_struct * work) +{ + struct delayed_work *dwork = container_of(work,struct delayed_work,work); + struct ieee80211_device *ieee = container_of(dwork,struct ieee80211_device,rate_adapter_wq); + struct net_device *dev = ieee->dev; +#else +void rtl8180_rate_adapter(struct net_device *dev) +{ + +#endif + //struct r8180_priv *priv = ieee80211_priv(dev); +// DMESG("---->rtl8180_rate_adapter"); + StaRateAdaptive87SE(dev); +// DMESG("<----rtl8180_rate_adapter"); +} +void timer_rate_adaptive(unsigned long data) +{ + struct r8180_priv* priv = ieee80211_priv((struct net_device *)data); + //DMESG("---->timer_rate_adaptive()\n"); + if(!priv->up) + { +// DMESG("<----timer_rate_adaptive():driver is not up!\n"); + return; + } + if((priv->ieee80211->iw_mode != IW_MODE_MASTER) + && (priv->ieee80211->state == IEEE80211_LINKED) && + (priv->ForcedDataRate == 0) ) + { +// DMESG("timer_rate_adaptive():schedule rate_adapter_wq\n"); +#ifdef CONFIG_RTL818X_S + queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq); +// StaRateAdaptive87SE((struct net_device *)data); +#endif + } + priv->rateadapter_timer.expires = jiffies + MSECS(priv->RateAdaptivePeriod); + add_timer(&priv->rateadapter_timer); + //DMESG("<----timer_rate_adaptive()\n"); +} +//by amy 080312} +void +SwAntennaDiversityRxOk8185( + struct net_device *dev, + u8 SignalStrength + ) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + +// printk("+SwAntennaDiversityRxOk8185: RxSs: %d\n", SignalStrength); + + priv->AdRxOkCnt++; + + if( priv->AdRxSignalStrength != -1) + { + priv->AdRxSignalStrength = ((priv->AdRxSignalStrength*7) + (SignalStrength*3)) / 10; + } + else + { // Initialization case. + priv->AdRxSignalStrength = SignalStrength; + } +//{+by amy 080312 + if( priv->LastRxPktAntenna ) //Main antenna. + priv->AdMainAntennaRxOkCnt++; + else // Aux antenna. + priv->AdAuxAntennaRxOkCnt++; +//+by amy 080312 +// printk("-SwAntennaDiversityRxOk8185: AdRxOkCnt: %d AdRxSignalStrength: %d\n", priv->AdRxOkCnt, priv->AdRxSignalStrength); +} +// +// Description: +// Change Antenna Switch. +// +bool +SetAntenna8185( + struct net_device *dev, + u8 u1bAntennaIndex + ) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + bool bAntennaSwitched = false; + +// printk("+SetAntenna8185(): Antenna is switching to: %d \n", u1bAntennaIndex); + + switch(u1bAntennaIndex) + { + case 0: + switch(priv->rf_chip) + { + case RF_ZEBRA2: + case RF_ZEBRA4: +#ifdef CONFIG_RTL8185B +#ifdef CONFIG_RTL818X_S + // Mac register, main antenna + write_nic_byte(dev, ANTSEL, 0x03); + //base band + write_phy_cck(dev,0x11, 0x9b); // Config CCK RX antenna. + write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna. + +#else + // Mac register, main antenna + write_nic_byte(dev, ANTSEL, 0x03); + //base band + write_phy_cck(dev, 0x10, 0x9b); // Config CCK RX antenna. + write_phy_ofdm(dev, 0x0d, 0x5c); // Config OFDM RX antenna. +#endif +#endif + + bAntennaSwitched = true; + break; + + default: + printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip); + break; + } + break; + + case 1: + switch(priv->rf_chip) + { + case RF_ZEBRA2: + case RF_ZEBRA4: +#ifdef CONFIG_RTL8185B +#ifdef CONFIG_RTL818X_S + // Mac register, aux antenna + write_nic_byte(dev, ANTSEL, 0x00); + //base band + write_phy_cck(dev, 0x11, 0xbb); // Config CCK RX antenna. + write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna. +#else + // Mac register, aux antenna + write_nic_byte(dev, ANTSEL, 0x00); + //base band + write_phy_cck(dev, 0x10, 0xbb); // Config CCK RX antenna. + write_phy_ofdm(dev, 0x0d, 0x54); // Config OFDM RX antenna. +#endif +#endif + + bAntennaSwitched = true; + break; + + default: + printk("SetAntenna8185: unkown RFChipID(%d)\n", priv->rf_chip); + break; + } + break; + + default: + printk("SetAntenna8185: unkown u1bAntennaIndex(%d)\n", u1bAntennaIndex); + break; + } + + if(bAntennaSwitched) + { + priv->CurrAntennaIndex = u1bAntennaIndex; + } + +// printk("-SetAntenna8185(): return (%#X)\n", bAntennaSwitched); + + return bAntennaSwitched; +} +// +// Description: +// Toggle Antenna switch. +// +bool +SwitchAntenna( + struct net_device *dev + ) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + + bool bResult; + + if(priv->CurrAntennaIndex == 0) + { +#if 0//lzm del 080826 +//by amy 080312 +#ifdef CONFIG_RTL818X_S + if(priv->bSwAntennaDiverity) + bResult = SetAntennaConfig87SE(dev, 1, true); + else +#endif +#endif + bResult = SetAntenna8185(dev, 1); +//by amy 080312 +// printk("SwitchAntenna(): switching to antenna 1 ......\n"); +// bResult = SetAntenna8185(dev, 1);//-by amy 080312 + } + else + { +#if 0//lzm del 080826 +//by amy 080312 +#ifdef CONFIG_RTL818X_S + if(priv->bSwAntennaDiverity) + bResult = SetAntennaConfig87SE(dev, 0, true); + else +#endif +#endif + bResult = SetAntenna8185(dev, 0); +//by amy 080312 +// printk("SwitchAntenna(): switching to antenna 0 ......\n"); +// bResult = SetAntenna8185(dev, 0);//-by amy 080312 + } + + return bResult; +} +// +// Description: +// Engine of SW Antenna Diversity mechanism. +// Since 8187 has no Tx part information, +// this implementation is only dependend on Rx part information. +// +// 2006.04.17, by rcnjko. +// +void +SwAntennaDiversity( + struct net_device *dev + ) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + bool bSwCheckSS=false; +// printk("+SwAntennaDiversity(): CurrAntennaIndex: %d\n", priv->CurrAntennaIndex); +// printk("AdTickCount is %d\n",priv->AdTickCount); +//by amy 080312 + if(bSwCheckSS) + { + priv->AdTickCount++; + + printk("(1) AdTickCount: %d, AdCheckPeriod: %d\n", + priv->AdTickCount, priv->AdCheckPeriod); + printk("(2) AdRxSignalStrength: %ld, AdRxSsThreshold: %ld\n", + priv->AdRxSignalStrength, priv->AdRxSsThreshold); + } +// priv->AdTickCount++;//-by amy 080312 + + // Case 1. No Link. + if(priv->ieee80211->state != IEEE80211_LINKED) + { + // printk("SwAntennaDiversity(): Case 1. No Link.\n"); + + priv->bAdSwitchedChecking = false; + // I switch antenna here to prevent any one of antenna is broken before link established, 2006.04.18, by rcnjko.. + SwitchAntenna(dev); + } + // Case 2. Linked but no packet received. + else if(priv->AdRxOkCnt == 0) + { + // printk("SwAntennaDiversity(): Case 2. Linked but no packet received.\n"); + + priv->bAdSwitchedChecking = false; + SwitchAntenna(dev); + } + // Case 3. Evaluate last antenna switch action and undo it if necessary. + else if(priv->bAdSwitchedChecking == true) + { + // printk("SwAntennaDiversity(): Case 3. Evaluate last antenna switch action.\n"); + + priv->bAdSwitchedChecking = false; + + // Adjust Rx signal strength threashold. + priv->AdRxSsThreshold = (priv->AdRxSignalStrength + priv->AdRxSsBeforeSwitched) / 2; + + priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ? + priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold; + if(priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched) + { // Rx signal strength is not improved after we swtiched antenna. => Swich back. +// printk("SwAntennaDiversity(): Rx Signal Strength is not improved, CurrRxSs: %d, LastRxSs: %d\n", +// priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched); +//by amy 080312 + // Increase Antenna Diversity checking period due to bad decision. + priv->AdCheckPeriod *= 2; +//by amy 080312 + // Increase Antenna Diversity checking period. + if(priv->AdCheckPeriod > priv->AdMaxCheckPeriod) + priv->AdCheckPeriod = priv->AdMaxCheckPeriod; + + // Wrong deceision => switch back. + SwitchAntenna(dev); + } + else + { // Rx Signal Strength is improved. +// printk("SwAntennaDiversity(): Rx Signal Strength is improved, CurrRxSs: %d, LastRxSs: %d\n", +// priv->AdRxSignalStrength, priv->AdRxSsBeforeSwitched); + + // Reset Antenna Diversity checking period to its min value. + priv->AdCheckPeriod = priv->AdMinCheckPeriod; + } + +// printk("SwAntennaDiversity(): AdRxSsThreshold: %d, AdCheckPeriod: %d\n", +// priv->AdRxSsThreshold, priv->AdCheckPeriod); + } + // Case 4. Evaluate if we shall switch antenna now. + // Cause Table Speed is very fast in TRC Dell Lab, we check it every time. + else// if(priv->AdTickCount >= priv->AdCheckPeriod)//-by amy 080312 + { +// printk("SwAntennaDiversity(): Case 4. Evaluate if we shall switch antenna now.\n"); + + priv->AdTickCount = 0; + + // + // We evaluate RxOk counts for each antenna first and than + // evaluate signal strength. + // The following operation can overcome the disability of CCA on both two antennas + // When signal strength was extremely low or high. + // 2008.01.30. + // + + // + // Evaluate RxOk count from each antenna if we shall switch default antenna now. + // Added by Roger, 2008.02.21. +//{by amy 080312 + if((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt) + && (priv->CurrAntennaIndex == 0)) + { // We set Main antenna as default but RxOk count was less than Aux ones. + + // printk("SwAntennaDiversity(): Main antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", + // priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt); + + // Switch to Aux antenna. + SwitchAntenna(dev); + priv->bHWAdSwitched = true; + } + else if((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt) + && (priv->CurrAntennaIndex == 1)) + { // We set Aux antenna as default but RxOk count was less than Main ones. + + // printk("SwAntennaDiversity(): Aux antenna RxOK is poor, AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", + // priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt); + + // Switch to Main antenna. + SwitchAntenna(dev); + priv->bHWAdSwitched = true; + } + else + {// Default antenna is better. + + // printk("SwAntennaDiversity(): Default antenna is better., AdMainAntennaRxOkCnt: %d, AdAuxAntennaRxOkCnt: %d\n", + // priv->AdMainAntennaRxOkCnt, priv->AdAuxAntennaRxOkCnt); + + // Still need to check current signal strength. + priv->bHWAdSwitched = false; + } + // + // We evaluate Rx signal strength ONLY when default antenna + // didn't changed by HW evaluation. + // 2008.02.27. + // + // [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05 + // For example, Throughput of aux is better than main antenna(about 10M v.s 2M), + // but AdRxSignalStrength is less than main. + // Our guess is that main antenna have lower throughput and get many change + // to receive more CCK packets(ex.Beacon) which have stronger SignalStrength. + // + if( (!priv->bHWAdSwitched) && (bSwCheckSS)) + { +//by amy 080312} + // Evaluate Rx signal strength if we shall switch antenna now. + if(priv->AdRxSignalStrength < priv->AdRxSsThreshold) + { // Rx signal strength is weak => Switch Antenna. +// printk("SwAntennaDiversity(): Rx Signal Strength is weak, CurrRxSs: %d, RxSsThreshold: %d\n", +// priv->AdRxSignalStrength, priv->AdRxSsThreshold); + + priv->AdRxSsBeforeSwitched = priv->AdRxSignalStrength; + priv->bAdSwitchedChecking = true; + + SwitchAntenna(dev); + } + else + { // Rx signal strength is OK. +// printk("SwAntennaDiversity(): Rx Signal Strength is OK, CurrRxSs: %d, RxSsThreshold: %d\n", +// priv->AdRxSignalStrength, priv->AdRxSsThreshold); + + priv->bAdSwitchedChecking = false; + // Increase Rx signal strength threashold if necessary. + if( (priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && // Signal is much stronger than current threshold + priv->AdRxSsThreshold <= priv->AdMaxRxSsThreshold) // Current threhold is not yet reach upper limit. + { + priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2; + priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ? + priv->AdMaxRxSsThreshold: priv->AdRxSsThreshold;//+by amy 080312 + } + + // Reduce Antenna Diversity checking period if possible. + if( priv->AdCheckPeriod > priv->AdMinCheckPeriod ) + { + priv->AdCheckPeriod /= 2; + } + } + } + } +//by amy 080312 + // Reset antenna diversity Rx related statistics. + priv->AdRxOkCnt = 0; + priv->AdMainAntennaRxOkCnt = 0; + priv->AdAuxAntennaRxOkCnt = 0; +//by amy 080312 + +// priv->AdRxOkCnt = 0;//-by amy 080312 + +// printk("-SwAntennaDiversity()\n"); +} + +// +// Description: +// Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. +// +bool +CheckTxPwrTracking( struct net_device *dev) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + + if(!priv->bTxPowerTrack) + { + return false; + } + +//lzm reserved 080826 + //if(priv->bScanInProgress) + //{ + // return false; + //} + + //if 87SE is in High Power , don't do Tx Power Tracking. asked by SD3 ED. 2008-08-08 Isaiah + if(priv->bToUpdateTxPwr) + { + return false; + } + + return true; +} + + +// +// Description: +// Timer callback function of SW Antenna Diversity. +// +void +SwAntennaDiversityTimerCallback( + struct net_device *dev + ) +{ + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + RT_RF_POWER_STATE rtState; + + //printk("+SwAntennaDiversityTimerCallback()\n"); + + // + // We do NOT need to switch antenna while RF is off. + // 2007.05.09, added by Roger. + // + rtState = priv->eRFPowerState; + do{ + if (rtState == eRfOff) + { +// printk("SwAntennaDiversityTimer - RF is OFF.\n"); + break; + } + else if (rtState == eRfSleep) + { + // Don't access BB/RF under Disable PLL situation. + //RT_TRACE((COMP_RF|COMP_ANTENNA), DBG_LOUD, ("SwAntennaDiversityTimerCallback(): RF is Sleep => skip it\n")); + break; + } + SwAntennaDiversity(dev); + + }while(false); + + if(priv->up) + { + priv->SwAntennaDiversityTimer.expires = jiffies + MSECS(ANTENNA_DIVERSITY_TIMER_PERIOD); + add_timer(&priv->SwAntennaDiversityTimer); + } + + //printk("-SwAntennaDiversityTimerCallback()\n"); +} + diff --git a/drivers/staging/rtl8187se/r8180_dm.h b/drivers/staging/rtl8187se/r8180_dm.h index 3de92f040f99..b2736c8e521d 100644 --- a/drivers/staging/rtl8187se/r8180_dm.h +++ b/drivers/staging/rtl8187se/r8180_dm.h @@ -1,41 +1,41 @@ -#ifndef R8180_DM_H -#define R8180_DM_H - -#include "r8180.h" -//#include "r8180_hw.h" -//#include "r8180_93cx6.h" -void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength); -bool SetAntenna8185(struct net_device *dev, u8 u1bAntennaIndex); -bool SwitchAntenna( struct net_device *dev); -void SwAntennaDiversity(struct net_device *dev ); -void SwAntennaDiversityTimerCallback(struct net_device *dev); -bool CheckDig(struct net_device *dev); -bool CheckHighPower(struct net_device *dev); -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) -void rtl8180_hw_dig_wq (struct work_struct *work); -#else -void rtl8180_hw_dig_wq(struct net_device *dev); -#endif -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) -void rtl8180_tx_pw_wq (struct work_struct *work); -#else -void rtl8180_tx_pw_wq(struct net_device *dev); -#endif -#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20) -void rtl8180_rate_adapter(struct work_struct * work); - -#else -void rtl8180_rate_adapter(struct net_device *dev); - -#endif -void TxPwrTracking87SE(struct net_device *dev); -bool CheckTxPwrTracking(struct net_device *dev); -#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20) -void rtl8180_rate_adapter(struct work_struct * work); -#else -void rtl8180_rate_adapter(struct net_device *dev); -#endif -void timer_rate_adaptive(unsigned long data); - - -#endif +#ifndef R8180_DM_H +#define R8180_DM_H + +#include "r8180.h" +//#include "r8180_hw.h" +//#include "r8180_93cx6.h" +void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength); +bool SetAntenna8185(struct net_device *dev, u8 u1bAntennaIndex); +bool SwitchAntenna( struct net_device *dev); +void SwAntennaDiversity(struct net_device *dev ); +void SwAntennaDiversityTimerCallback(struct net_device *dev); +bool CheckDig(struct net_device *dev); +bool CheckHighPower(struct net_device *dev); +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) +void rtl8180_hw_dig_wq (struct work_struct *work); +#else +void rtl8180_hw_dig_wq(struct net_device *dev); +#endif +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) +void rtl8180_tx_pw_wq (struct work_struct *work); +#else +void rtl8180_tx_pw_wq(struct net_device *dev); +#endif +#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20) +void rtl8180_rate_adapter(struct work_struct * work); + +#else +void rtl8180_rate_adapter(struct net_device *dev); + +#endif +void TxPwrTracking87SE(struct net_device *dev); +bool CheckTxPwrTracking(struct net_device *dev); +#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20) +void rtl8180_rate_adapter(struct work_struct * work); +#else +void rtl8180_rate_adapter(struct net_device *dev); +#endif +void timer_rate_adaptive(unsigned long data); + + +#endif