From: Claudio Scordino Date: Wed, 9 Nov 2011 14:51:49 +0000 (+0100) Subject: RS485: fix inconsistencies in the meaning of some variables X-Git-Tag: firefly_0821_release~3680^2~4065^2~4 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=93f3350c46fa5dfcc9650eb19b186e71ffc924c3;p=firefly-linux-kernel-4.4.55.git RS485: fix inconsistencies in the meaning of some variables The crisv10.c and the atmel_serial.c serial drivers intepret the fields of the serial_rs485 structure in a different way. In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c, instead, uses these values to know if a delay must be set before and after sending. This patch makes the usage of these variables consistent across all drivers and fixes the Documentation as well. From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be used to set the voltage of the RTS pin (as in the crisv10.c driver); the delay will be understood by looking only at the value of delay_rts_before_send and delay_rts_after_send. Signed-off-by: Claudio Scordino Signed-off-by: Darron Black Acked-by: Jesper Nilsson Acked-by: Nicolas Ferre Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 079cb3df62cf..41c8378c0b2f 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt @@ -97,15 +97,23 @@ struct serial_rs485 rs485conf; - /* Set RS485 mode: */ + /* Enable RS485 mode: */ rs485conf.flags |= SER_RS485_ENABLED; + /* Set logical level for RTS pin equal to 1 when sending: */ + rs485conf.flags |= SER_RS485_RTS_ON_SEND; + /* or, set logical level for RTS pin equal to 0 when sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND); + + /* Set logical level for RTS pin equal to 1 after sending: */ + rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; + /* or, set logical level for RTS pin equal to 0 after sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); + /* Set rts delay before send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND; rs485conf.delay_rts_before_send = ...; /* Set rts delay after send, if needed: */ - rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; rs485conf.delay_rts_after_send = ...; /* Set this flag if you want to receive data even whilst sending data */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4a0f86fa1e90..4c823f341d98 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -228,7 +228,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + if ((rs485conf->delay_rts_after_send) > 0) UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { @@ -304,7 +304,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1228,7 +1228,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (atmel_port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + if ((atmel_port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -1447,16 +1447,6 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port, rs485conf->delay_rts_after_send = rs485_delay[1]; rs485conf->flags = 0; - if (rs485conf->delay_rts_before_send == 0 && - rs485conf->delay_rts_after_send == 0) { - rs485conf->flags |= SER_RS485_RTS_ON_SEND; - } else { - if (rs485conf->delay_rts_before_send) - rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND; - if (rs485conf->delay_rts_after_send) - rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) rs485conf->flags |= SER_RS485_RX_DURING_TX; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index b7435043f2fe..1dfba7b779c8 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3234,9 +3234,8 @@ rs_write(struct tty_struct *tty, e100_disable_rx(info); e100_enable_rx_irq(info); #endif - if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && - (info->rs485.delay_rts_before_send > 0)) - msleep(info->rs485.delay_rts_before_send); + if (info->rs485.delay_rts_before_send > 0) + msleep(info->rs485.delay_rts_before_send); } #endif /* CONFIG_ETRAX_RS485 */ @@ -3693,10 +3692,6 @@ rs_ioctl(struct tty_struct *tty, rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; rs485data.flags = 0; - if (rs485data.delay_rts_before_send != 0) - rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); if (rs485ctrl.enabled) rs485data.flags |= SER_RS485_ENABLED; @@ -4531,7 +4526,6 @@ static int __init rs_init(void) /* Set sane defaults */ info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); info->rs485.delay_rts_before_send = 0; info->rs485.flags &= ~(SER_RS485_ENABLED); #endif diff --git a/include/linux/serial.h b/include/linux/serial.h index 97ff8e27a6cc..3d86517fe7d5 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -207,13 +207,15 @@ struct serial_icounter_struct { struct serial_rs485 { __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) -#define SER_RS485_RTS_ON_SEND (1 << 1) -#define SER_RS485_RTS_AFTER_SEND (1 << 2) -#define SER_RS485_RTS_BEFORE_SEND (1 << 3) +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Milliseconds */ - __u32 delay_rts_after_send; /* Milliseconds */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ };