From: Alan Nisota Date: Sun, 14 May 2006 16:23:56 +0000 (-0300) Subject: V4L/DVB (4029): [PATCH] Genpix 8PSK->USB driver (Take 2) X-Git-Tag: firefly_0821_release~35239^2~108 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=9bbe076f364aa7ba8c2e49e417a76d628ffb164c;p=firefly-linux-kernel-4.4.55.git V4L/DVB (4029): [PATCH] Genpix 8PSK->USB driver (Take 2) This is a patch which includes support for the GENPIX 8PSK->USB module. The board supports QPSK, BPSK and 8PSK decoding (though I don't think it will be DVB-S2 compliant) With the following patch, the boad is equivalent to a budget card (no CA Module) The patch which adds 8psk suppot will follow, but is seperate, as it requires DVB-S2 support More info on the board can be found at www.genpix-electronics.com (and they host the requisite firmwares there as well) Signed off by: Alan Nisota Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index e388fb1567d6..5350e963c17b 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -130,6 +130,15 @@ config DVB_USB_VP702X DVB-S USB2.0 receivers. +config DVB_USB_GP8PSK + tristate "GENPIX 8PSK->USB module support" + depends on DVB_USB + help + Say Y here to support the + GENPIX 8psk module + + DVB-S USB2.0 receivers. + config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 2dc9aad9681e..9643f56c7fe9 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -7,6 +7,9 @@ obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o dvb-usb-vp702x-objs = vp702x.o vp702x-fe.o obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o +dvb-usb-gp8psk-objs = gp8psk.o gp8psk-fe.o +obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o + dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index cb239049b098..95698918bc11 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -31,6 +31,7 @@ #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 +#define USB_VID_GENPIX 0x09c0 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 @@ -104,5 +105,6 @@ #define USB_PID_KYE_DVB_T_WARM 0x701f #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f - +#define USB_PID_GENPIX_8PSK_COLD 0x0200 +#define USB_PID_GENPIX_8PSK_WARM 0x0201 #endif diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c new file mode 100644 index 000000000000..6ccbdc9cd772 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c @@ -0,0 +1,272 @@ +/* DVB USB compliant Linux driver for the + * - GENPIX 8pks/qpsk USB2.0 DVB-S module + * + * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * + * Thanks to GENPIX for the sample code used to implement this module. + * + * This module is based off the vp7045 and vp702x modules + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "gp8psk.h" + +struct gp8psk_fe_state { + struct dvb_frontend fe; + + struct dvb_usb_device *d; + + u16 snr; + + unsigned long next_snr_check; +}; + +static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 lock; + + if (gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0, 0, &lock,1)) + return -EINVAL; + + if (lock) + *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; + else + *status = 0; + + return 0; +} + +/* not supported by this Frontend */ +static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + (void) fe; + *ber = 0; + return 0; +} + +/* not supported by this Frontend */ +static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + (void) fe; + *unc = 0; + return 0; +} + +static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 buf[2]; + + if (time_after(jiffies,st->next_snr_check)) { + gp8psk_usb_in_op(st->d,GET_SIGNAL_STRENGTH,0,0,buf,2); + *snr = (int)(buf[1]) << 8 | buf[0]; + /* snr is reported in dBu*256 */ + /* snr / 38.4 ~= 100% strength */ + /* snr * 17 returns 100% strength as 65535 */ + if (*snr <= 3855) + *snr = (*snr<<4) + *snr; // snr * 17 + else + *snr = 65535; + st->next_snr_check = jiffies + (10*HZ)/1000; + } else { + *snr = st->snr; + } + return 0; +} + +static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + return gp8psk_fe_read_snr(fe, strength); +} + +static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int gp8psk_fe_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + struct gp8psk_fe_state *state = fe->demodulator_priv; + u8 cmd[10]; + u32 freq = fep->frequency * 1000; + + cmd[4] = freq & 0xff; + cmd[5] = (freq >> 8) & 0xff; + cmd[6] = (freq >> 16) & 0xff; + cmd[7] = (freq >> 24) & 0xff; + + switch(fe->ops.info.type) { + case FE_QPSK: + cmd[0] = fep->u.qpsk.symbol_rate & 0xff; + cmd[1] = (fep->u.qpsk.symbol_rate >> 8) & 0xff; + cmd[2] = (fep->u.qpsk.symbol_rate >> 16) & 0xff; + cmd[3] = (fep->u.qpsk.symbol_rate >> 24) & 0xff; + cmd[8] = ADV_MOD_DVB_QPSK; + cmd[9] = 0x03; /*ADV_MOD_FEC_XXX*/ + break; + default: + // other modes are unsuported right now + cmd[0] = 0; + cmd[1] = 0; + cmd[2] = 0; + cmd[3] = 0; + cmd[8] = 0; + cmd[9] = 0; + break; + } + + gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10); + + state->next_snr_check = jiffies; + + return 0; +} + +static int gp8psk_fe_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + return 0; +} + + +static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd *m) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + deb_fe("%s\n",__FUNCTION__); + + if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, + m->msg, m->msg_len)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe, + fe_sec_mini_cmd_t burst) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 cmd; + + deb_fe("%s\n",__FUNCTION__); + + /* These commands are certainly wrong */ + cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; + + if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0, + &cmd, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + + if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE, + (tone == SEC_TONE_ON), 0, NULL, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + + if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, + voltage == SEC_VOLTAGE_18, 0, NULL, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + u8 cmd = sw_cmd & 0x7f; + + if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0, + NULL, 0)) { + return -EINVAL; + } + if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), + 0, NULL, 0)) { + return -EINVAL; + } + + return 0; +} + +static void gp8psk_fe_release(struct dvb_frontend* fe) +{ + struct gp8psk_fe_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops gp8psk_fe_ops; + +struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d) +{ + struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); + if (s == NULL) + goto error; + + s->d = d; + memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); + s->fe.demodulator_priv = s; + + goto success; +error: + return NULL; +success: + return &s->fe; +} + + +static struct dvb_frontend_ops gp8psk_fe_ops = { + .info = { + .name = "Genpix 8psk-USB DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 100, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = gp8psk_fe_release, + + .init = NULL, + .sleep = NULL, + + .set_frontend = gp8psk_fe_set_frontend, + .get_frontend = gp8psk_fe_get_frontend, + .get_tune_settings = gp8psk_fe_get_tune_settings, + + .read_status = gp8psk_fe_read_status, + .read_ber = gp8psk_fe_read_ber, + .read_signal_strength = gp8psk_fe_read_signal_strength, + .read_snr = gp8psk_fe_read_snr, + .read_ucblocks = gp8psk_fe_read_unc_blocks, + + .diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg, + .diseqc_send_burst = gp8psk_fe_send_diseqc_burst, + .set_tone = gp8psk_fe_set_tone, + .set_voltage = gp8psk_fe_set_voltage, + .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, +}; diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c new file mode 100644 index 000000000000..d6771cbd262d --- /dev/null +++ b/drivers/media/dvb/dvb-usb/gp8psk.c @@ -0,0 +1,254 @@ +/* DVB USB compliant Linux driver for the + * - GENPIX 8pks/qpsk USB2.0 DVB-S module + * + * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * + * Thanks to GENPIX for the sample code used to implement this module. + * + * This module is based off the vp7045 and vp702x modules + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "gp8psk.h" + +/* debug */ +static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw"; +int dvb_usb_gp8psk_debug; +module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) +{ + int ret = 0,try = 0; + + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) + return ret; + + while (ret >= 0 && ret != blen && try < 3) { + ret = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev,0), + req, + USB_TYPE_VENDOR | USB_DIR_IN, + value,index,b,blen, + 2000); + deb_info("reading number %d (ret: %d)\n",try,ret); + try++; + } + + if (ret < 0 || ret != blen) { + warn("usb in operation failed."); + ret = -EIO; + } else + ret = 0; + + deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); + debug_dump(b,blen,deb_xfer); + + mutex_unlock(&d->usb_mutex); + + return ret; +} + +int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); + debug_dump(b,blen,deb_xfer); + + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) + return ret; + + if (usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev,0), + req, + USB_TYPE_VENDOR | USB_DIR_OUT, + value,index,b,blen, + 2000) != blen) { + warn("usb out operation failed."); + ret = -EIO; + } else + ret = 0; + mutex_unlock(&d->usb_mutex); + + return ret; +} + +static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) +{ + int ret; + const struct firmware *fw = NULL; + u8 *ptr, *buf; + if ((ret = request_firmware(&fw, bcm4500_firmware, + &d->udev->dev)) != 0) { + err("did not find the bcm4500 firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + bcm4500_firmware,ret); + return ret; + } + + if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) { + release_firmware(fw); + return -EINVAL; + } + + info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware); + + ptr = fw->data; + buf = (u8 *) kmalloc(512, GFP_KERNEL | GFP_DMA); + + while (ptr[0] != 0xff) { + u16 buflen = ptr[0] + 4; + if (ptr + buflen >= fw->data + fw->size) { + err("failed to load bcm4500 firmware."); + release_firmware(fw); + kfree(buf); + return -EINVAL; + } + memcpy(buf, ptr, buflen); + if (dvb_usb_generic_write(d, buf, buflen)) { + err("failed to load bcm4500 firmware."); + release_firmware(fw); + kfree(buf); + return -EIO; + } + ptr += buflen; + } + release_firmware(fw); + kfree(buf); + return 0; +} + +static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 status, buf; + if (onoff) { + gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); + if (! (status & 0x01)) /* started */ + if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) + return -EINVAL; + + if (! (status & 0x02)) /* BCM4500 firmware loaded */ + if(gp8psk_load_bcm4500fw(d)) + return EINVAL; + + if (! (status & 0x04)) /* LNB Power */ + if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, + &buf, 1)) + return EINVAL; + + /* Set DVB mode */ + if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) + return -EINVAL; + gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); + } else { + /* Turn off LNB power */ + if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) + return EINVAL; + /* Turn off 8psk power */ + if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) + return -EINVAL; + + } + return 0; +} + + +static int gp8psk_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + return gp8psk_usb_out_op(d, ARM_TRANSFER, onoff, 0 , NULL, 0); +} + +static int gp8psk_frontend_attach(struct dvb_usb_device *d) +{ + d->fe = gp8psk_fe_attach(d); + + return 0; +} + +static struct dvb_usb_properties gp8psk_properties; + +static int gp8psk_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL); +} + +static struct usb_device_id gp8psk_usb_table [] = { + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, gp8psk_usb_table); + +static struct dvb_usb_properties gp8psk_properties = { + .caps = 0, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-gp8psk-01.fw", + + .streaming_ctrl = gp8psk_streaming_ctrl, + .power_ctrl = gp8psk_power_ctrl, + .frontend_attach = gp8psk_frontend_attach, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + + .num_device_descs = 1, + .devices = { + { .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver", + .cold_ids = { &gp8psk_usb_table[0], NULL }, + .warm_ids = { &gp8psk_usb_table[1], NULL }, + }, + { 0 }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver gp8psk_usb_driver = { + .name = "dvb_usb_gp8psk", + .probe = gp8psk_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = gp8psk_usb_table, +}; + +/* module stuff */ +static int __init gp8psk_usb_module_init(void) +{ + int result; + if ((result = usb_register(&gp8psk_usb_driver))) { + err("usb_register failed. (%d)",result); + return result; + } + + return 0; +} + +static void __exit gp8psk_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&gp8psk_usb_driver); +} + +module_init(gp8psk_usb_module_init); +module_exit(gp8psk_usb_module_exit); + +MODULE_AUTHOR("Alan Nisota "); +MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h new file mode 100644 index 000000000000..3eba7061011c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/gp8psk.h @@ -0,0 +1,79 @@ +/* DVB USB compliant Linux driver for the + * - GENPIX 8pks/qpsk USB2.0 DVB-S module + * + * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * + * Thanks to GENPIX for the sample code used to implement this module. + * + * This module is based off the vp7045 and vp702x modules + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_GP8PSK_H_ +#define _DVB_USB_GP8PSK_H_ + +#define DVB_USB_LOG_PREFIX "gp8psk" +#include "dvb-usb.h" + +extern int dvb_usb_gp8psk_debug; +#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args) +#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args) +/* gp8psk commands */ + +/* Twinhan Vendor requests */ +#define TH_COMMAND_IN 0xC0 +#define TH_COMMAND_OUT 0xC1 + +/* command bytes */ +#define GET_8PSK_CONFIG 0x80 +#define SET_8PSK_CONFIG 0x81 +#define ARM_TRANSFER 0x85 +#define TUNE_8PSK 0x86 +#define GET_SIGNAL_STRENGTH 0x87 +#define LOAD_BCM4500 0x88 +#define BOOT_8PSK 0x89 +#define START_INTERSIL 0x8A +#define SET_LNB_VOLTAGE 0x8B +#define SET_22KHZ_TONE 0x8C +#define SEND_DISEQC_COMMAND 0x8D +#define SET_DVB_MODE 0x8E +#define SET_DN_SWITCH 0x8F +#define GET_SIGNAL_LOCK 0x90 + +/* Satellite modulation modes */ +#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ +#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ +#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ +#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ + +#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ +#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ +#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ +#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ +#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ +#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ + +#define GET_USB_SPEED 0x07 + #define USB_SPEED_LOW 0 + #define USB_SPEED_FULL 1 + #define USB_SPEED_HIGH 2 + +#define RESET_FX2 0x13 + +#define FW_VERSION_READ 0x0B +#define VENDOR_STRING_READ 0x0C +#define PRODUCT_STRING_READ 0x0D +#define FW_BCD_VERSION_READ 0x14 + +extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); +extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); +extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen); + +#endif