From: wangyuhang Date: Sun, 1 Sep 2013 09:36:21 +0000 (+0800) Subject: spi: quad: fix the name of DT property X-Git-Tag: firefly_0821_release~176^2~5480^2~10^2 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=a110f93d8b4672c4ad18d911f62b9e861010e83b;p=firefly-linux-kernel-4.4.55.git spi: quad: fix the name of DT property spi: quad: fix the name of DT property in patch The previous property name spi-tx-nbits and spi-rx-nbits looks not human-readable. To make it consistent with other devices, using property name spi-tx-bus-width and spi-rx-bus-width instead of the previous one specify the number of data wires that spi controller will work in. Add the specification in spi-bus.txt. Signed-off-by: wangyuhang Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index 296015e3c632..800dafe5b01b 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -55,6 +55,16 @@ contain the following properties. chip select active high - spi-3wire - (optional) Empty property indicating device requires 3-wire mode. +- spi-tx-bus-width - (optional) The bus width(number of data wires) that + used for MOSI. Defaults to 1 if not present. +- spi-rx-bus-width - (optional) The bus width(number of data wires) that + used for MISO. Defaults to 1 if not present. + +Some SPI controllers and devices support Dual and Quad SPI transfer mode. +It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD). +Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is +only 1(SINGLE), 2(DUAL) and 4(QUAD). +Dual/Quad mode is not allowed when 3-wire mode is used. If a gpio chipselect is used for the SPI slave the gpio number will be passed via the cs_gpio diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 7557f611457f..0075318f4fa1 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -870,7 +870,7 @@ static void of_register_spi_devices(struct spi_master *master) spi->mode |= SPI_3WIRE; /* Device DUAL/QUAD mode */ - prop = of_get_property(nc, "spi-tx-nbits", &len); + prop = of_get_property(nc, "spi-tx-bus-width", &len); if (prop && len == sizeof(*prop)) { switch (be32_to_cpup(prop)) { case SPI_NBITS_SINGLE: @@ -883,14 +883,14 @@ static void of_register_spi_devices(struct spi_master *master) break; default: dev_err(&master->dev, - "spi-tx-nbits %d not supported\n", + "spi-tx-bus-width %d not supported\n", be32_to_cpup(prop)); spi_dev_put(spi); continue; } } - prop = of_get_property(nc, "spi-rx-nbits", &len); + prop = of_get_property(nc, "spi-rx-bus-width", &len); if (prop && len == sizeof(*prop)) { switch (be32_to_cpup(prop)) { case SPI_NBITS_SINGLE: @@ -903,7 +903,7 @@ static void of_register_spi_devices(struct spi_master *master) break; default: dev_err(&master->dev, - "spi-rx-nbits %d not supported\n", + "spi-rx-bus-width %d not supported\n", be32_to_cpup(prop)); spi_dev_put(spi); continue;