From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Sat, 31 Jan 2015 11:11:54 +0000 (+0100)
Subject: ARM: sun4i: olinuxino lime: Convert to DT label based syntax
X-Git-Tag: firefly_0821_release~176^2~1556^2~14^2~81
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=a86d26c85a414d4ec69ff1b1fb66b14d5c3046bd;p=firefly-linux-kernel-4.4.55.git

ARM: sun4i: olinuxino lime: Convert to DT label based syntax

In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---

diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 75742f8f96f3..03350dff42b1 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -56,136 +56,131 @@
 	model = "Olimex A10-OLinuXino-LIME";
 	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
 
-	cpus {
-		cpu0: cpu@0 {
-			/*
-			 * The A10-Lime is known to be unstable
-			 * when running at 1008 MHz
-			 */
-			operating-points = <
-				/* kHz    uV */
-				912000  1350000
-				864000  1300000
-				624000  1250000
-				>;
-			cooling-max-level = <2>;
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
+};
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
-		mdio@01c0b080 {
-			status = "okay";
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points = <
+		/* kHz    uV */
+		912000  1350000
+		864000  1300000
+		624000  1250000
+		>;
+	cooling-max-level = <2>;
+};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+&ehci1 {
+	status = "okay";
+};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
 
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
 
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
 
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
+&mdio {
+	status = "okay";
 
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
 
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+&ohci0 {
+	status = "okay";
+};
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
+&ohci1 {
+	status = "okay";
+};
 
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinolime>;
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
 
-		green {
-			label = "a10-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
+&reg_usb1_vbus {
+	status = "okay";
+};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
+&reg_usb2_vbus {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };