From: Yuri Tikhonov Date: Sun, 30 Aug 2009 02:13:12 +0000 (-0700) Subject: md/raid6: asynchronous handle_stripe_dirtying6 X-Git-Tag: firefly_0821_release~12340^2^2~33^2~4 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=a9b39a741a7e3b262b9f51fefb68e17b32756999;p=firefly-linux-kernel-4.4.55.git md/raid6: asynchronous handle_stripe_dirtying6 In the synchronous implementation of stripe dirtying we processed a degraded stripe with one call to handle_stripe_dirtying6(). I.e. compute the missing blocks from the other drives, then copy in the new data and reconstruct the parities. In the asynchronous case we do not perform stripe operations directly. Instead, operations are scheduled with flags to be later serviced by raid_run_ops. So, for the degraded case the final reconstruction step can only be carried out after all blocks have been brought up to date by being read, or computed. Like the raid5 case schedule_reconstruction() sets STRIPE_OP_RECONSTRUCT to request a parity generation pass and through operation chaining can handle compute and reconstruct in a single raid_run_ops pass. [dan.j.williams@intel.com: fixup handle_stripe_dirtying6 gating] Signed-off-by: Yuri Tikhonov Signed-off-by: Ilya Yanok Signed-off-by: Dan Williams --- diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 49da6f74d6d6..08f806379b07 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2766,99 +2766,46 @@ static void handle_stripe_dirtying6(raid5_conf_t *conf, struct stripe_head *sh, struct stripe_head_state *s, struct r6_state *r6s, int disks) { - int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i; + int rcw = 0, pd_idx = sh->pd_idx, i; int qd_idx = sh->qd_idx; + + set_bit(STRIPE_HANDLE, &sh->state); for (i = disks; i--; ) { struct r5dev *dev = &sh->dev[i]; - /* Would I have to read this buffer for reconstruct_write */ - if (!test_bit(R5_OVERWRITE, &dev->flags) - && i != pd_idx && i != qd_idx - && (!test_bit(R5_LOCKED, &dev->flags) - ) && - !test_bit(R5_UPTODATE, &dev->flags)) { - if (test_bit(R5_Insync, &dev->flags)) rcw++; - else { - pr_debug("raid6: must_compute: " - "disk %d flags=%#lx\n", i, dev->flags); - must_compute++; + /* check if we haven't enough data */ + if (!test_bit(R5_OVERWRITE, &dev->flags) && + i != pd_idx && i != qd_idx && + !test_bit(R5_LOCKED, &dev->flags) && + !(test_bit(R5_UPTODATE, &dev->flags) || + test_bit(R5_Wantcompute, &dev->flags))) { + rcw++; + if (!test_bit(R5_Insync, &dev->flags)) + continue; /* it's a failed drive */ + + if ( + test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + pr_debug("Read_old stripe %llu " + "block %d for Reconstruct\n", + (unsigned long long)sh->sector, i); + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + } else { + pr_debug("Request delayed stripe %llu " + "block %d for Reconstruct\n", + (unsigned long long)sh->sector, i); + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); } } } - pr_debug("for sector %llu, rcw=%d, must_compute=%d\n", - (unsigned long long)sh->sector, rcw, must_compute); - set_bit(STRIPE_HANDLE, &sh->state); - - if (rcw > 0) - /* want reconstruct write, but need to get some data */ - for (i = disks; i--; ) { - struct r5dev *dev = &sh->dev[i]; - if (!test_bit(R5_OVERWRITE, &dev->flags) - && !(s->failed == 0 && (i == pd_idx || i == qd_idx)) - && !test_bit(R5_LOCKED, &dev->flags) && - !test_bit(R5_UPTODATE, &dev->flags) && - test_bit(R5_Insync, &dev->flags)) { - if ( - test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { - pr_debug("Read_old stripe %llu " - "block %d for Reconstruct\n", - (unsigned long long)sh->sector, i); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - s->locked++; - } else { - pr_debug("Request delayed stripe %llu " - "block %d for Reconstruct\n", - (unsigned long long)sh->sector, i); - set_bit(STRIPE_DELAYED, &sh->state); - set_bit(STRIPE_HANDLE, &sh->state); - } - } - } /* now if nothing is locked, and if we have enough data, we can start a * write request */ - if (s->locked == 0 && rcw == 0 && + if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) && + s->locked == 0 && rcw == 0 && !test_bit(STRIPE_BIT_DELAY, &sh->state)) { - if (must_compute > 0) { - /* We have failed blocks and need to compute them */ - switch (s->failed) { - case 0: - BUG(); - case 1: - compute_block_1(sh, r6s->failed_num[0], 0); - break; - case 2: - compute_block_2(sh, r6s->failed_num[0], - r6s->failed_num[1]); - break; - default: /* This request should have been failed? */ - BUG(); - } - } - - pr_debug("Computing parity for stripe %llu\n", - (unsigned long long)sh->sector); - compute_parity6(sh, RECONSTRUCT_WRITE); - /* now every locked buffer is ready to be written */ - for (i = disks; i--; ) - if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { - pr_debug("Writing stripe %llu block %d\n", - (unsigned long long)sh->sector, i); - s->locked++; - set_bit(R5_Wantwrite, &sh->dev[i].flags); - } - if (s->locked == disks) - if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state)) - atomic_inc(&conf->pending_full_writes); - /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */ - set_bit(STRIPE_INSYNC, &sh->state); - - if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { - atomic_dec(&conf->preread_active_stripes); - if (atomic_read(&conf->preread_active_stripes) < - IO_THRESHOLD) - md_wakeup_thread(conf->mddev->thread); - } + schedule_reconstruction(sh, s, 1, 0); } } @@ -3539,8 +3486,13 @@ static bool handle_stripe6(struct stripe_head *sh) (s.syncing && (s.uptodate < disks)) || s.expanding) handle_stripe_fill6(sh, &s, &r6s, disks); - /* now to consider writing and what else, if anything should be read */ - if (s.to_write) + /* Now to consider new write requests and what else, if anything + * should be read. We do not handle new writes when: + * 1/ A 'write' operation (copy+gen_syndrome) is already in flight. + * 2/ A 'check' operation is in flight, as it may clobber the parity + * block. + */ + if (s.to_write && !sh->reconstruct_state && !sh->check_state) handle_stripe_dirtying6(conf, sh, &s, &r6s, disks); /* maybe we need to check and possibly fix the parity for this stripe