From: Arnd Bergmann Date: Sun, 23 Sep 2012 18:04:40 +0000 (+0000) Subject: ARM: Remove mach-bcmring X-Git-Tag: firefly_0821_release~3680^2~1956^2~1^2~1 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=abbb0db2bd9d0bbfad3219604045168c50180539;p=firefly-linux-kernel-4.4.55.git ARM: Remove mach-bcmring Remove mach-bcmring as this is no longer maintained or used. Signed-off-by: Christian Daudt Reviewed-by: Jiandong Zheng Acked-by: Will Deacon Signed-off-by: Arnd Bergmann --- diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f71e94..c908a8c73b51 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -658,22 +658,6 @@ W: http://www.linux4sam.org S: Supported F: arch/arm/mach-at91/ -ARM/BCMRING ARM ARCHITECTURE -M: Jiandong Zheng -M: Scott Branden -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: arch/arm/mach-bcmring - -ARM/BCMRING MTD NAND DRIVER -M: Jiandong Zheng -M: Scott Branden -L: linux-mtd@lists.infradead.org -S: Maintained -F: drivers/mtd/nand/bcm_umi_nand.c -F: drivers/mtd/nand/bcm_umi_bch.c -F: drivers/mtd/nand/nand_bcm_umi.h - ARM/CALXEDA HIGHBANK ARCHITECTURE M: Rob Herring L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5..ce61f4a6fc4a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -356,18 +356,6 @@ config ARCH_AT91 This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. -config ARCH_BCMRING - bool "Broadcom BCMRING" - depends on MMU - select CPU_V6 - select ARM_AMBA - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - help - Support for Broadcom's BCMRing platform. - config ARCH_HIGHBANK bool "Calxeda Highbank-based" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -1037,8 +1025,6 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" -source "arch/arm/mach-bcmring/Kconfig" - source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6d..8383e2ed6906 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -136,7 +136,6 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) := at91 -machine-$(CONFIG_ARCH_BCMRING) := bcmring machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx machine-$(CONFIG_ARCH_DAVINCI) := davinci diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig deleted file mode 100644 index 9e6a8fe13164..000000000000 --- a/arch/arm/configs/bcmring_defconfig +++ /dev/null @@ -1,79 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set -# CONFIG_ELF_CORE is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_TIMERFD is not set -# CONFIG_EVENTFD is not set -# CONFIG_AIO is not set -CONFIG_PERF_EVENTS=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_BCMRING=y -CONFIG_BCM_ZRELADDR=0x8000 -CONFIG_CPU_32v6K=y -CONFIG_NO_HZ=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_UACCESS_WITH_MEMCPY=y -CONFIG_ZBOOT_ROM_TEXT=0x0e000000 -CONFIG_ZBOOT_ROM_BSS=0x0ea00000 -CONFIG_ZBOOT_ROM=y -CONFIG_NET=y -# CONFIG_WIRELESS is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_BCM_UMI=y -CONFIG_MTD_NAND_BCM_UMI_HWCS=y -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_CONSOLE_TRANSLATIONS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=64 -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_FILE_LOCKING is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -# CONFIG_JFFS2_FS_SECURITY is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_HEADERS_CHECK=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig deleted file mode 100644 index 9170d16dca50..000000000000 --- a/arch/arm/mach-bcmring/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -choice - prompt "Processor selection in BCMRING family of devices" - depends on ARCH_BCMRING - default ARCH_BCM11107 - -config ARCH_FPGA11107 - bool "FPGA11107" - -config ARCH_BCM11107 - bool "BCM11107" -endchoice - -menu "BCMRING Options" - depends on ARCH_BCMRING - -config BCM_ZRELADDR - hex "Compressed ZREL ADDR" - -endmenu diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile deleted file mode 100644 index f8d9fcedf917..000000000000 --- a/arch/arm/mach-bcmring/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o -obj-y += csp/ diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot deleted file mode 100644 index aef2467757fa..000000000000 --- a/arch/arm/mach-bcmring/Makefile.boot +++ /dev/null @@ -1,6 +0,0 @@ -# Address where decompressor will be written and eventually executed. -# -# default to SDRAM -zreladdr-y += $(CONFIG_BCM_ZRELADDR) -params_phys-y := 0x00000800 - diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c deleted file mode 100644 index 45c97b1ee9b1..000000000000 --- a/arch/arm/mach-bcmring/arch.c +++ /dev/null @@ -1,199 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -#include "core.h" - -HW_DECLARE_SPINLOCK(arch) -HW_DECLARE_SPINLOCK(gpio) -#if defined(CONFIG_DEBUG_SPINLOCK) - EXPORT_SYMBOL(bcmring_gpio_reg_lock); -#endif - -/* sysctl */ -static int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */ - -static void bcmring_restart(char mode, const char *cmd) -{ - printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot); - - if (mode == 'h') { - /* Reboot configured in proc entry */ - if (bcmring_arch_warm_reboot) { - printk("warm reset\n"); - /* Issue Warm reset (do not reset ethernet switch, keep alive) */ - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM); - } else { - /* Force reset of everything */ - printk("force reset\n"); - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } - } else { - /* Force reset of everything */ - printk("force reset\n"); - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } -} - -static struct ctl_table_header *bcmring_sysctl_header; - -static struct ctl_table bcmring_sysctl_warm_reboot[] = { - { - .procname = "warm", - .data = &bcmring_arch_warm_reboot, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec}, - {} -}; - -static struct ctl_table bcmring_sysctl_reboot[] = { - { - .procname = "reboot", - .mode = 0555, - .child = bcmring_sysctl_warm_reboot}, - {} -}; - -static struct resource nand_resource[] = { - [0] = { - .start = MM_ADDR_IO_NAND, - .end = MM_ADDR_IO_NAND + 0x1000 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nand_device = { - .name = "bcm-nand", - .id = -1, - .resource = nand_resource, - .num_resources = ARRAY_SIZE(nand_resource), -}; - -static struct resource pmu_resource = { - .start = IRQ_PMUIRQ, - .end = IRQ_PMUIRQ, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .resource = &pmu_resource, - .num_resources = 1, -}; - - -static struct platform_device *devices[] __initdata = { - &nand_device, - &pmu_device, -}; - -/**************************************************************************** -* -* Called from the customize_machine function in arch/arm/kernel/setup.c -* -* The customize_machine function is tagged as an arch_initcall -* (see include/linux/init.h for the order that the various init sections -* are called in. -* -*****************************************************************************/ -static void __init bcmring_init_machine(void) -{ - - bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot); - - /* Enable spread spectrum */ - chipcHw_enableSpreadSpectrum(); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - bcmring_amba_init(); - - dma_init(); -} - -/**************************************************************************** -* -* Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags -* passed in by the boot loader. -* -*****************************************************************************/ - -static void __init bcmring_fixup(struct tag *t, char **cmdline, - struct meminfo *mi) { -#ifdef CONFIG_BLK_DEV_INITRD - printk(KERN_NOTICE "bcmring_fixup\n"); - t->hdr.tag = ATAG_CORE; - t->hdr.size = tag_size(tag_core); - t->u.core.flags = 0; - t->u.core.pagesize = PAGE_SIZE; - t->u.core.rootdev = 31 << 8 | 0; - t = tag_next(t); - - t->hdr.tag = ATAG_MEM; - t->hdr.size = tag_size(tag_mem32); - t->u.mem.start = CFG_GLOBAL_RAM_BASE; - t->u.mem.size = CFG_GLOBAL_RAM_SIZE; - - t = tag_next(t); - - t->hdr.tag = ATAG_NONE; - t->hdr.size = 0; -#endif -} - -/**************************************************************************** -* -* Machine Description -* -*****************************************************************************/ - -MACHINE_START(BCMRING, "BCMRING") - /* Maintainer: Broadcom Corporation */ - .fixup = bcmring_fixup, - .map_io = bcmring_map_io, - .init_early = bcmring_init_early, - .init_irq = bcmring_init_irq, - .timer = &bcmring_timer, - .init_machine = bcmring_init_machine, - .restart = bcmring_restart, -MACHINE_END diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c deleted file mode 100644 index ad237a42d265..000000000000 --- a/arch/arm/mach-bcmring/clock.c +++ /dev/null @@ -1,223 +0,0 @@ -/***************************************************************************** -* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "clock.h" - -#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) -#define clk_is_pll1(x) ((x)->type & CLK_TYPE_PLL1) -#define clk_is_pll2(x) ((x)->type & CLK_TYPE_PLL2) -#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) -#define clk_is_bypassable(x) ((x)->type & CLK_TYPE_BYPASSABLE) - -#define clk_is_using_xtal(x) ((x)->mode & CLK_MODE_XTAL) - -static DEFINE_SPINLOCK(clk_lock); - -static void __clk_enable(struct clk *clk) -{ - if (!clk) - return; - - /* enable parent clock first */ - if (clk->parent) - __clk_enable(clk->parent); - - if (clk->use_cnt++ == 0) { - if (clk_is_pll1(clk)) { /* PLL1 */ - chipcHw_pll1Enable(clk->rate_hz, 0); - } else if (clk_is_pll2(clk)) { /* PLL2 */ - chipcHw_pll2Enable(clk->rate_hz); - } else if (clk_is_using_xtal(clk)) { /* source is crystal */ - if (!clk_is_primary(clk)) - chipcHw_bypassClockEnable(clk->csp_id); - } else { /* source is PLL */ - chipcHw_setClockEnable(clk->csp_id); - } - } -} - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (!clk) - return -EINVAL; - - spin_lock_irqsave(&clk_lock, flags); - __clk_enable(clk); - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -static void __clk_disable(struct clk *clk) -{ - if (!clk) - return; - - BUG_ON(clk->use_cnt == 0); - - if (--clk->use_cnt == 0) { - if (clk_is_pll1(clk)) { /* PLL1 */ - chipcHw_pll1Disable(); - } else if (clk_is_pll2(clk)) { /* PLL2 */ - chipcHw_pll2Disable(); - } else if (clk_is_using_xtal(clk)) { /* source is crystal */ - if (!clk_is_primary(clk)) - chipcHw_bypassClockDisable(clk->csp_id); - } else { /* source is PLL */ - chipcHw_setClockDisable(clk->csp_id); - } - } - - if (clk->parent) - __clk_disable(clk->parent); -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (!clk) - return; - - spin_lock_irqsave(&clk_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clk_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (!clk) - return 0; - - return clk->rate_hz; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned long actual; - unsigned long rate_hz; - - if (!clk) - return -EINVAL; - - if (!clk_is_programmable(clk)) - return -EINVAL; - - if (clk->use_cnt) - return -EBUSY; - - spin_lock_irqsave(&clk_lock, flags); - actual = clk->parent->rate_hz; - rate_hz = min(actual, rate); - spin_unlock_irqrestore(&clk_lock, flags); - - return rate_hz; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned long actual; - unsigned long rate_hz; - - if (!clk) - return -EINVAL; - - if (!clk_is_programmable(clk)) - return -EINVAL; - - if (clk->use_cnt) - return -EBUSY; - - spin_lock_irqsave(&clk_lock, flags); - actual = clk->parent->rate_hz; - rate_hz = min(actual, rate); - rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz); - clk->rate_hz = rate_hz; - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -struct clk *clk_get_parent(struct clk *clk) -{ - if (!clk) - return NULL; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - struct clk *old_parent; - - if (!clk || !parent) - return -EINVAL; - - if (!clk_is_primary(parent) || !clk_is_bypassable(clk)) - return -EINVAL; - - /* if more than one user, parent is not allowed */ - if (clk->use_cnt > 1) - return -EBUSY; - - if (clk->parent == parent) - return 0; - - spin_lock_irqsave(&clk_lock, flags); - old_parent = clk->parent; - clk->parent = parent; - if (clk_is_using_xtal(parent)) - clk->mode |= CLK_MODE_XTAL; - else - clk->mode &= (~CLK_MODE_XTAL); - - /* if clock is active */ - if (clk->use_cnt != 0) { - clk->use_cnt--; - /* enable clock with the new parent */ - __clk_enable(clk); - /* disable the old parent */ - __clk_disable(old_parent); - } - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_set_parent); diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h deleted file mode 100644 index 5e0b98138973..000000000000 --- a/arch/arm/mach-bcmring/clock.h +++ /dev/null @@ -1,33 +0,0 @@ -/***************************************************************************** -* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ -#include - -#define CLK_TYPE_PRIMARY 1 /* primary clock must NOT have a parent */ -#define CLK_TYPE_PLL1 2 /* PPL1 */ -#define CLK_TYPE_PLL2 4 /* PPL2 */ -#define CLK_TYPE_PROGRAMMABLE 8 /* programmable clock rate */ -#define CLK_TYPE_BYPASSABLE 16 /* parent can be changed */ - -#define CLK_MODE_XTAL 1 /* clock source is from crystal */ - -struct clk { - const char *name; /* clock name */ - unsigned int type; /* clock type */ - unsigned int mode; /* current mode */ - volatile int use_bypass; /* indicate if it's in bypass mode */ - chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */ - unsigned long rate_hz; /* clock rate in Hz */ - unsigned int use_cnt; /* usage count */ - struct clk *parent; /* parent clock */ -}; diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c deleted file mode 100644 index adbfb1994582..000000000000 --- a/arch/arm/mach-bcmring/core.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * derived from linux/arch/arm/mach-versatile/core.c - * linux/arch/arm/mach-bcmring/core.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Portions copyright Broadcom 2008 */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#include "clock.h" - -#include -#include -#include -#include - -static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); -static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); - -static struct clk pll1_clk = { - .name = "PLL1", - .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1, - .rate_hz = 2000000000, - .use_cnt = 7, -}; - -static struct clk uart_clk = { - .name = "UART", - .type = CLK_TYPE_PROGRAMMABLE, - .csp_id = chipcHw_CLOCK_UART, - .rate_hz = HW_CFG_UART_CLK_HZ, - .parent = &pll1_clk, -}; - -static struct clk dummy_apb_pclk = { - .name = "BUSCLK", - .type = CLK_TYPE_PRIMARY, - .mode = CLK_MODE_XTAL, -}; - -/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */ -#if defined(CONFIG_ARCH_FPGA11107) -/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */ -/* slow down Linux's sense of time */ -#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) -#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) -#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30) -#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30) -#else -#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ -#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ -#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ -#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000) -#endif - -static struct clk sp804_timer012_clk = { - .name = "sp804-timer-0,1,2", - .type = CLK_TYPE_PRIMARY, - .mode = CLK_MODE_XTAL, - .rate_hz = TIMER1_FREQUENCY_MHZ * 1000000, -}; - -static struct clk sp804_timer3_clk = { - .name = "sp804-timer-3", - .type = CLK_TYPE_PRIMARY, - .mode = CLK_MODE_XTAL, - .rate_hz = TIMER3_FREQUENCY_KHZ * 1000, -}; - -static struct clk_lookup lookups[] = { - { /* Bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* UART0 */ - .dev_id = "uarta", - .clk = &uart_clk, - }, { /* UART1 */ - .dev_id = "uartb", - .clk = &uart_clk, - }, { /* SP804 timer 0 */ - .dev_id = "sp804", - .con_id = "timer0", - .clk = &sp804_timer012_clk, - }, { /* SP804 timer 1 */ - .dev_id = "sp804", - .con_id = "timer1", - .clk = &sp804_timer012_clk, - }, { /* SP804 timer 3 */ - .dev_id = "sp804", - .con_id = "timer3", - .clk = &sp804_timer3_clk, - } -}; - -static struct amba_device *amba_devs[] __initdata = { - &uartA_device, - &uartB_device, -}; - -void __init bcmring_amba_init(void) -{ - int i; - u32 bus_clock; - -/* Linux is run initially in non-secure mode. Secure peripherals */ -/* generate FIQ, and must be handled in secure mode. Until we have */ -/* a linux security monitor implementation, keep everything in */ -/* non-secure mode. */ - chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU); - secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL | - secHw_BLK_MASK_KEY_SCAN | - secHw_BLK_MASK_TOUCH_SCREEN | - secHw_BLK_MASK_UART0 | - secHw_BLK_MASK_UART1 | - secHw_BLK_MASK_WATCHDOG | - secHw_BLK_MASK_SPUM | - secHw_BLK_MASK_DDR2 | - secHw_BLK_MASK_SPU | - secHw_BLK_MASK_PKA | - secHw_BLK_MASK_RNG | - secHw_BLK_MASK_RTC | - secHw_BLK_MASK_OTP | - secHw_BLK_MASK_BOOT | - secHw_BLK_MASK_MPU | - secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR); - - /* Only the devices attached to the AMBA bus are enabled just before the bus is */ - /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */ - /* driver to access these blocks. The bus is probed, and the drivers are loaded. */ - /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */ - bus_clock = chipcHw_REG_BUS_CLOCK_GE - | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1; - - chipcHw_busInterfaceClockEnable(bus_clock); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -/* - * Where is the timer (VA)? - */ -#define TIMER0_VA_BASE ((void __iomem *)MM_IO_BASE_TMR) -#define TIMER1_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x20)) -#define TIMER2_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x40)) -#define TIMER3_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x60)) - -static int __init bcmring_clocksource_init(void) -{ - /* setup timer1 as free-running clocksource */ - sp804_clocksource_init(TIMER1_VA_BASE, "timer1"); - - /* setup timer3 as free-running clocksource */ - sp804_clocksource_init(TIMER3_VA_BASE, "timer3"); - - return 0; -} - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init bcmring_init_timer(void) -{ - printk(KERN_INFO "bcmring_init_timer\n"); - /* - * Initialise to a known state (all timers off) - */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - - /* - * Make irqs happen for the system timer - */ - bcmring_clocksource_init(); - - sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0"); -} - -struct sys_timer bcmring_timer = { - .init = bcmring_init_timer, -}; - -void __init bcmring_init_early(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h deleted file mode 100644 index e0e02c48f9b1..000000000000 --- a/arch/arm/mach-bcmring/core.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/core.h - * - * Copyright (C) 2004 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Portions copyright Broadcom 2008 */ -#ifndef __ASM_ARCH_BCMRING_H -#define __ASM_ARCH_BCMRING_H - -void __init bcmring_amba_init(void); -void __init bcmring_map_io(void); -void __init bcmring_init_irq(void); -void __init bcmring_init_early(void); - -extern struct sys_timer bcmring_timer; -#endif diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile deleted file mode 100644 index 648c0377530e..000000000000 --- a/arch/arm/mach-bcmring/csp/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-y += dmac/ -obj-y += tmr/ -obj-y += chipc/ diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile deleted file mode 100644 index 673952768ee5..000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c deleted file mode 100644 index 96273ff34956..000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c +++ /dev/null @@ -1,776 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file chipcHw.c -* -* @brief Low level Various CHIP clock controlling routines -* -* @note -* -* These routines provide basic clock controlling functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include - -#include -#include - -#include -#include - -/* ---- Private Constants and Types --------------------------------------- */ - -/* VPM alignment algorithm uses this */ -#define MAX_PHASE_ADJUST_COUNT 0xFFFF /* Max number of times allowed to adjust the phase */ -#define MAX_PHASE_ALIGN_ATTEMPTS 10 /* Max number of attempt to align the phase */ - -/* Local definition of clock type */ -#define PLL_CLOCK 1 /* PLL Clock */ -#define NON_PLL_CLOCK 2 /* Divider clock */ - -static int chipcHw_divide(int num, int denom) - __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in hertz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; - uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ - uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ - uint32_t dependentClockType = 0; - uint32_t vcoHz = 0; - - /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - uint64_t adjustFreq = 0; - - vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ - adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz * - (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC)); - vcoFreqPll1Hz += (uint32_t) adjustFreq; - } else { - vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - } - vcoFreqPll2Hz = - chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - switch (clock) { - case chipcHw_CLOCK_DDR: - pPLLReg = &pChipcHw->DDRClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ARM: - pPLLReg = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW: - pPLLReg = &pChipcHw->ESWClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_VPM: - pPLLReg = &pChipcHw->VPMClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW125: - pPLLReg = &pChipcHw->ESW125Clock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_UART: - pPLLReg = &pChipcHw->UARTClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO0: - pPLLReg = &pChipcHw->SDIO0Clock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO1: - pPLLReg = &pChipcHw->SDIO1Clock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SPI: - pPLLReg = &pChipcHw->SPIClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ETM: - pPLLReg = &pChipcHw->ETMClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_USB: - pPLLReg = &pChipcHw->USBClock; - vcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_LCD: - pPLLReg = &pChipcHw->LCDClock; - vcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_APM: - pPLLReg = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_BUS: - pClockCtrl = &pChipcHw->ACLKClock; - pDependentClock = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_OTP: - pClockCtrl = &pChipcHw->OTPClock; - break; - case chipcHw_CLOCK_I2C: - pClockCtrl = &pChipcHw->I2CClock; - break; - case chipcHw_CLOCK_I2S0: - pClockCtrl = &pChipcHw->I2S0Clock; - break; - case chipcHw_CLOCK_RTBUS: - pClockCtrl = &pChipcHw->RTBUSClock; - pDependentClock = &pChipcHw->ACLKClock; - dependentClockType = NON_PLL_CLOCK; - break; - case chipcHw_CLOCK_APM100: - pClockCtrl = &pChipcHw->APM100Clock; - pDependentClock = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_TSC: - pClockCtrl = &pChipcHw->TSCClock; - break; - case chipcHw_CLOCK_LED: - pClockCtrl = &pChipcHw->LEDClock; - break; - case chipcHw_CLOCK_I2S1: - pClockCtrl = &pChipcHw->I2S1Clock; - break; - } - - if (pPLLReg) { - /* Obtain PLL clock frequency */ - if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { - /* Return crystal clock frequency when bypassed */ - return chipcHw_XTAL_FREQ_Hz; - } else if (clock == chipcHw_CLOCK_DDR) { - /* DDR frequency is configured in PLLDivider register */ - return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); - } else { - /* From chip revision number B0, LCD clock is internally divided by 2 */ - if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { - vcoHz >>= 1; - } - /* Obtain PLL clock frequency using VCO dividers */ - return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); - } - } else if (pClockCtrl) { - /* Obtain divider clock frequency */ - uint32_t div; - uint32_t freq = 0; - - if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { - /* Return crystal clock frequency when bypassed */ - return chipcHw_XTAL_FREQ_Hz; - } else if (pDependentClock) { - /* Identify the dependent clock frequency */ - switch (dependentClockType) { - case PLL_CLOCK: - if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { - /* Use crystal clock frequency when dependent PLL clock is bypassed */ - freq = chipcHw_XTAL_FREQ_Hz; - } else { - /* Obtain PLL clock frequency using VCO dividers */ - div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK; - freq = div ? chipcHw_divide(vcoHz, div) : 0; - } - break; - case NON_PLL_CLOCK: - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { - freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); - } else { - if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { - /* Use crystal clock frequency when dependent divider clock is bypassed */ - freq = chipcHw_XTAL_FREQ_Hz; - } else { - /* Obtain divider clock frequency using XTAL dividers */ - div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; - freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256)); - } - } - break; - } - } else { - /* Dependent on crystal clock */ - freq = chipcHw_XTAL_FREQ_Hz; - } - - div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK; - return chipcHw_divide(freq, (div ? div : 256)); - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in Hz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */ - uint32_t freq /* [ IN ] Clock frequency in Hz */ - ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; - uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ - uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */ - uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ - uint32_t dependentClockType = 0; - uint32_t vcoHz = 0; - uint32_t desVcoHz = 0; - - /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - uint64_t adjustFreq = 0; - - vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ - adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz * - (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC)); - vcoFreqPll1Hz += (uint32_t) adjustFreq; - - /* Desired VCO frequency */ - desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1); - } else { - vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - } - vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - switch (clock) { - case chipcHw_CLOCK_DDR: - /* Configure the DDR_ctrl:BUS ratio settings */ - { - REG_LOCAL_IRQ_SAVE; - /* Dvide DDR_phy by two to obtain DDR_ctrl clock */ - pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); - REG_LOCAL_IRQ_RESTORE; - } - pPLLReg = &pChipcHw->DDRClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ARM: - pPLLReg = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW: - pPLLReg = &pChipcHw->ESWClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_VPM: - /* Configure the VPM:BUS ratio settings */ - { - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); - REG_LOCAL_IRQ_RESTORE; - } - pPLLReg = &pChipcHw->VPMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW125: - pPLLReg = &pChipcHw->ESW125Clock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_UART: - pPLLReg = &pChipcHw->UARTClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO0: - pPLLReg = &pChipcHw->SDIO0Clock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO1: - pPLLReg = &pChipcHw->SDIO1Clock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SPI: - pPLLReg = &pChipcHw->SPIClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ETM: - pPLLReg = &pChipcHw->ETMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_USB: - pPLLReg = &pChipcHw->USBClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_LCD: - pPLLReg = &pChipcHw->LCDClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_APM: - pPLLReg = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_BUS: - pClockCtrl = &pChipcHw->ACLKClock; - pDependentClock = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_OTP: - pClockCtrl = &pChipcHw->OTPClock; - break; - case chipcHw_CLOCK_I2C: - pClockCtrl = &pChipcHw->I2CClock; - break; - case chipcHw_CLOCK_I2S0: - pClockCtrl = &pChipcHw->I2S0Clock; - break; - case chipcHw_CLOCK_RTBUS: - pClockCtrl = &pChipcHw->RTBUSClock; - pDependentClock = &pChipcHw->ACLKClock; - dependentClockType = NON_PLL_CLOCK; - break; - case chipcHw_CLOCK_APM100: - pClockCtrl = &pChipcHw->APM100Clock; - pDependentClock = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_TSC: - pClockCtrl = &pChipcHw->TSCClock; - break; - case chipcHw_CLOCK_LED: - pClockCtrl = &pChipcHw->LEDClock; - break; - case chipcHw_CLOCK_I2S1: - pClockCtrl = &pChipcHw->I2S1Clock; - break; - } - - if (pPLLReg) { - /* Select XTAL as bypass source */ - reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO); - reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - /* For DDR settings use only the PLL divider clock */ - if (pPLLReg == &pChipcHw->DDRClock) { - /* Set M1DIV for PLL1, which controls the DDR clock */ - reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); - /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); - } else { - /* From chip revision number B0, LCD clock is internally divided by 2 */ - if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { - desVcoHz >>= 1; - vcoHz >>= 1; - } - /* Set MDIV to change the frequency */ - reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK)); - reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq)); - /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); - } - /* Wait for for atleast 200ns as per the protocol to change frequency */ - udelay(1); - /* Do not bypass */ - reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - /* Return the configured frequency */ - return freq; - } else if (pClockCtrl) { - uint32_t divider = 0; - - /* Divider clock should not be bypassed */ - reg32_modify_and(pClockCtrl, - ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT); - - /* Identify the clock source */ - if (pDependentClock) { - switch (dependentClockType) { - case PLL_CLOCK: - divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); - break; - case NON_PLL_CLOCK: - { - uint32_t sourceClock = 0; - - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { - sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); - } else { - uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; - sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256)); - } - divider = chipcHw_divide(sourceClock, freq); - } - break; - } - } else { - divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq); - } - - if (divider) { - REG_LOCAL_IRQ_SAVE; - /* Set the divider to obtain the required frequency */ - *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK); - REG_LOCAL_IRQ_RESTORE; - return freq; - } - } - - return 0; -} - -EXPORT_SYMBOL(chipcHw_setClockFrequency); - -/****************************************************************************/ -/** -* @brief Set VPM clock in sync with BUS clock for Chip Rev #A0 -* -* This function does the phase adjustment between VPM and BUS clock -* -* @return >= 0 : On success (# of adjustment required) -* -1 : On failure -* -*/ -/****************************************************************************/ -static int vpmPhaseAlignA0(void) -{ - uint32_t phaseControl; - uint32_t phaseValue; - uint32_t prevPhaseComp; - int iter = 0; - int adjustCount = 0; - int count = 0; - - for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) { - phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; - phaseValue = 0; - prevPhaseComp = 0; - - /* Step 1: Look for falling PH_COMP transition */ - - /* Read the contents of VPM Clock resgister */ - phaseValue = pChipcHw->VPMClock; - do { - /* Store previous value of phase comparator */ - prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP; - /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; - - if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { - phaseControl = (0x3F & (phaseControl - 1)); - } else { - /* Increment to the Phase count value for next write, if Phase is not stable. */ - phaseControl = (0x3F & (phaseControl + 1)); - } - /* Count number of adjustment made */ - adjustCount++; - } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || /* Look for a transition */ - ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && /* Look for a falling edge */ - (adjustCount < MAX_PHASE_ADJUST_COUNT) /* Do not exceed the limit while trying */ - ); - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - /* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */ - - for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { - phaseControl = (0x3F & (phaseControl + 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; - /* Count number of adjustment made */ - adjustCount++; - } - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - if (count != 5) { - /* Detected false transition */ - continue; - } - - /* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */ - - for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { - phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; - /* Count number of adjustment made */ - adjustCount++; - } - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - if (count != 3) { - /* Detected noisy transition */ - continue; - } - - /* Step 4: Keep moving backward before the original transition took place. */ - - for (count = 0; (count < 5); count++) { - phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; - /* Count number of adjustment made */ - adjustCount++; - } - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) { - /* Detected false transition */ - continue; - } - - /* Step 5: Re discover the valid transition */ - - do { - /* Store previous value of phase comparator */ - prevPhaseComp = phaseValue; - /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= - chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; - - if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { - phaseControl = (0x3F & (phaseControl - 1)); - } else { - /* Increment to the Phase count value for next write, if Phase is not stable. */ - phaseControl = (0x3F & (phaseControl + 1)); - } - - /* Count number of adjustment made */ - adjustCount++; - } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT)); - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } else { - /* Valid phase must have detected */ - break; - } - } - - /* For VPM Phase should be perfectly aligned. */ - phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT); - /* Load new phase value */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - - REG_LOCAL_IRQ_RESTORE; - } - /* Return the status */ - return (int)adjustCount; -} - -/****************************************************************************/ -/** -* @brief Set VPM clock in sync with BUS clock -* -* This function does the phase adjustment between VPM and BUS clock -* -* @return >= 0 : On success (# of adjustment required) -* -1 : On failure -* -*/ -/****************************************************************************/ -int chipcHw_vpmPhaseAlign(void) -{ - - if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) { - return vpmPhaseAlignA0(); - } else { - uint32_t phaseControl = chipcHw_getVpmPhaseControl(); - uint32_t phaseValue = 0; - int adjustCount = 0; - - /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; - /* Disable HW VPM phase alignment */ - chipcHw_vpmHwPhaseAlignDisable(); - /* Enable SW VPM phase alignment */ - chipcHw_vpmSwPhaseAlignEnable(); - /* Adjust VPM phase */ - while (adjustCount < MAX_PHASE_ADJUST_COUNT) { - phaseValue = chipcHw_getVpmHwPhaseAlignStatus(); - - /* Adjust phase control value */ - if (phaseValue > 0xF) { - /* Increment phase control value */ - phaseControl++; - } else if (phaseValue < 0xF) { - /* Decrement phase control value */ - phaseControl--; - } else { - /* Enable VPM access */ - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; - /* Return adjust count */ - return adjustCount; - } - /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - /* Count adjustment */ - adjustCount++; - } - } - - /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; - return -1; -} - -/****************************************************************************/ -/** -* @brief Local Divide function -* -* This function does the divide -* -* @return divide value -* -*/ -/****************************************************************************/ -static int chipcHw_divide(int num, int denom) -{ - int r; - int t = 1; - - /* Shift denom and t up to the largest value to optimize algorithm */ - /* t contains the units of each divide */ - while ((denom & 0x40000000) == 0) { /* fails if denom=0 */ - denom = denom << 1; - t = t << 1; - } - - /* Initialize the result */ - r = 0; - - do { - /* Determine if there exists a positive remainder */ - if ((num - denom) >= 0) { - /* Accumlate t to the result and calculate a new remainder */ - num = num - denom; - r = r + t; - } - /* Continue to shift denom and shift t down to 0 */ - denom = denom >> 1; - t = t >> 1; - } while (t != 0); - - return r; -} diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c deleted file mode 100644 index 367df75d4bb3..000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c +++ /dev/null @@ -1,293 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file chipcHw_init.c -* -* @brief Low level CHIPC PLL configuration functions -* -* @note -* -* These routines provide basic PLL controlling functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include - -#include -#include - -#include -#include -/* ---- Private Constants and Types --------------------------------------- */ - -/* - Calculation for NDIV_i to obtain VCO frequency - ----------------------------------------------- - - Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f) - for Freq_vco = VCO_FREQ_MHz - Freq_ref = chipcHw_XTAL_FREQ_Hz - PLL_P1 = PLL_P2 = 1 - and - PLL_NDIV_f = 0 - - We get: - PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz - - Calculation for PLL MDIV to obtain frequency Freq_x for channel x - ----------------------------------------------------------------- - Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x - - PLL_MDIV_x = VCO_FREQ_MHz / Freq_x -*/ - -/* ---- Private Variables ------------------------------------------------- */ -/****************************************************************************/ -/** -* @brief Initializes the PLL2 -* -* This function initializes the PLL2 -* -*/ -/****************************************************************************/ -void chipcHw_pll2Enable(uint32_t vcoFreqHz) -{ - uint32_t pllPreDivider2 = 0; - - { - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; - - pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN | - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER | - (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) << - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P1 << - chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P2 << - chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); - - /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; - - /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider2 = pllPreDivider2; - /* Set NDIV Frac */ - pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f; - - /* This has to be removed once the default values are fixed for PLL2. */ - pChipcHw->PLLControl12 = 0x38000700; - pChipcHw->PLLControl22 = 0x00000015; - - /* Reset PLL2 */ - if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } else { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } - REG_LOCAL_IRQ_RESTORE; - } - - /* Insert certain amount of delay before deasserting ARESET. */ - udelay(1); - - { - REG_LOCAL_IRQ_SAVE; - /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig2 &= - ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); - - REG_LOCAL_IRQ_RESTORE; - - } - - /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) - ; - - { - REG_LOCAL_IRQ_SAVE; - /* Remove digital reset */ - pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET; - - REG_LOCAL_IRQ_RESTORE; - } -} - -EXPORT_SYMBOL(chipcHw_pll2Enable); - -/****************************************************************************/ -/** -* @brief Initializes the PLL1 -* -* This function initializes the PLL1 -* -*/ -/****************************************************************************/ -void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) -{ - uint32_t pllPreDivider = 0; - - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->PLLConfig = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; - /* Setting VCO frequency */ - if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { - pllPreDivider = - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 | - ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) - - 1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P1 << - chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P2 << - chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); - } else { - pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN | - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER | - (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) << - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P1 << - chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P2 << - chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); - } - - /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; - - /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider = pllPreDivider; - /* Set NDIV Frac */ - if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f_SS; - } else { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f; - } - - /* Reset PLL1 */ - if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } else { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } - - REG_LOCAL_IRQ_RESTORE; - - /* Insert certain amount of delay before deasserting ARESET. */ - udelay(1); - - { - REG_LOCAL_IRQ_SAVE; - /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig &= - ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); - REG_LOCAL_IRQ_RESTORE; - } - - /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED) - || !(pChipcHw-> - PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) - ; - - /* Remove digital reset */ - { - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET; - REG_LOCAL_IRQ_RESTORE; - } - } -} - -EXPORT_SYMBOL(chipcHw_pll1Enable); - -/****************************************************************************/ -/** -* @brief Initializes the chipc module -* -* This function initializes the PLLs and core system clocks -* -*/ -/****************************************************************************/ - -void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */ - ) { -#if !(defined(__KERNEL__) && !defined(STANDALONE)) - delay_init(); -#endif - - /* Do not program PLL, when warm reset */ - if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) { - chipcHw_pll1Enable(initParam->pllVcoFreqHz, - initParam->ssSupport); - chipcHw_pll2Enable(initParam->pll2VcoFreqHz); - } else { - /* Clear sticky bits */ - chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET); - } - /* Clear sticky bits */ - chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET); - - /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */ - pChipcHw->ACLKClock = - (pChipcHw-> - ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> - armBusRatio & - chipcHw_REG_ACLKClock_CLK_DIV_MASK); - - /* Set various core component frequencies. The order in which this is done is important for some. */ - /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */ - /* frequency to find its ratio with the BUS. Hence we must set the ARM first, followed by the BUS, */ - /* then VPM and RTBUS. */ - - chipcHw_setClockFrequency(chipcHw_CLOCK_ARM, - initParam->busClockFreqHz * - initParam->armBusRatio); - chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz); - chipcHw_setClockFrequency(chipcHw_CLOCK_VPM, - initParam->busClockFreqHz * - initParam->vpmBusRatio); - chipcHw_setClockFrequency(chipcHw_CLOCK_DDR, - initParam->busClockFreqHz * - initParam->ddrBusRatio); - chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS, - initParam->busClockFreqHz / 2); -} diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c deleted file mode 100644 index 2671d8896bbb..000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c +++ /dev/null @@ -1,124 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include -#include -#include -#include - -/* ---- Private Constants and Types --------------------------------------- */ -/* ---- Private Variables ------------------------------------------------- */ -void chipcHw_reset_run_from_aram(void); - -typedef void (*RUNFUNC) (void); - -/****************************************************************************/ -/** -* @brief warmReset -* -* @note warmReset configures the clocks which are not reset back to the state -* required to execute on reset. To do so we need to copy the code into internal -* memory to change the ARM clock while we are not executing from DDR. -*/ -/****************************************************************************/ -void chipcHw_reset(uint32_t mask) -{ - int i = 0; - RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM; - - /* Disable all interrupts */ - intcHw_irq_disable(INTCHW_INTC0, 0xffffffff); - intcHw_irq_disable(INTCHW_INTC1, 0xffffffff); - intcHw_irq_disable(INTCHW_SINTC, 0xffffffff); - - { - REG_LOCAL_IRQ_SAVE; - if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) { - chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } - /* Bypass the PLL clocks before reboot */ - pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; - pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; - - /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */ - do { - ((uint32_t *) MM_IO_BASE_ARAM)[i] = - ((uint32_t *) &chipcHw_reset_run_from_aram)[i]; - i++; - } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ - - CSP_CACHE_FLUSH_ALL; - - /* run the function from ARAM */ - runFunc(); - - /* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */ - REG_LOCAL_IRQ_RESTORE; - } -} - -/* This function must run from internal memory */ -void chipcHw_reset_run_from_aram(void) -{ -/* Make sure, pipeline is filled with instructions coming from ARAM */ -__asm (" nop \n\t" - " nop \n\t" -#if defined(__KERNEL__) && !defined(STANDALONE) - " MRC p15,#0x0,r0,c1,c0,#0 \n\t" - " BIC r0,r0,#0xd \n\t" - " MCR p15,#0x0,r0,c1,c0,#0 \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" -#endif - " nop \n\t" - " nop \n\t" -/* Bypass the ARM clock and switch to XTAL clock */ - " MOV r2,#0x80000000 \n\t" - " LDR r3,[r2,#8] \n\t" - " ORR r3,r3,#0x20000 \n\t" - " STR r3,[r2,#8] \n\t" - - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" -/* Issue reset */ - " MOV r3,#0x2 \n\t" - " STR r3,[r2,#0x80] \n\t" -/* End here */ - " MOV pc,pc \n\t"); -/* 0xe1a0f00f == asm ("mov r15, r15"); */ -} diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c deleted file mode 100644 index 54ad964fe94c..000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c +++ /dev/null @@ -1,64 +0,0 @@ -/***************************************************************************** -* Copyright 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ -/****************************************************************************/ -/** -* @file chipcHw_str.c -* -* @brief Contains strings which are useful to linux and csp -* -* @note -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include - -/* ---- Private Constants and Types --------------------------------------- */ - -static const char *gMuxStr[] = { - "GPIO", /* 0 */ - "KeyPad", /* 1 */ - "I2C-Host", /* 2 */ - "SPI", /* 3 */ - "Uart", /* 4 */ - "LED-Mtx-P", /* 5 */ - "LED-Mtx-S", /* 6 */ - "SDIO-0", /* 7 */ - "SDIO-1", /* 8 */ - "PCM", /* 9 */ - "I2S", /* 10 */ - "ETM", /* 11 */ - "Debug", /* 12 */ - "Misc", /* 13 */ - "0xE", /* 14 */ - "0xF", /* 15 */ -}; - -/****************************************************************************/ -/** -* @brief Retrieves a string representation of the mux setting for a pin. -* -* @return Pointer to a character string. -*/ -/****************************************************************************/ - -const char *chipcHw_getGpioPinFunctionStr(int pin) -{ - if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) { - return ""; - } - - return gMuxStr[chipcHw_getGpioPinFunction(pin)]; -} diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile deleted file mode 100644 index fb1104fe56b2..000000000000 --- a/arch/arm/mach-bcmring/csp/dmac/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += dmacHw.o dmacHw_extra.o \ No newline at end of file diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c deleted file mode 100644 index 6b9be2e98e51..000000000000 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c +++ /dev/null @@ -1,917 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw.c -* -* @brief Low level DMA controller driver routines -* -* @note -* -* These routines provide basic DMA functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include -#include - -#include -#include -#include -#include - -/* ---- External Function Prototypes ------------------------------------- */ - -/* Allocate DMA control blocks */ -dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; - -uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2; -uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2; - -/****************************************************************************/ -/** -* @brief Get maximum FIFO for a DMA channel -* -* @return Maximum allowable FIFO size -* -* -*/ -/****************************************************************************/ -static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - uint32_t val = 0; - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_MISC_t *pMiscReg = - (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module); - - switch (pCblk->channel) { - case 0: - val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28; - break; - case 1: - val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28; - break; - case 2: - val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28; - break; - case 3: - val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28; - break; - case 4: - val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28; - break; - case 5: - val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28; - break; - case 6: - val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28; - break; - case 7: - val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28; - break; - } - - if (val <= 0x4) { - return 8 << val; - } else { - dmacHw_ASSERT(0); - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Program channel register to initiate transfer -* -* @return void -* -* -* @note -* - Descriptor buffer MUST ALWAYS be flushed before calling this function -* - This function should also be called from ISR to program the channel with -* pending descriptors -*/ -/****************************************************************************/ -void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - dmacHw_DESC_RING_t *pRing; - dmacHw_DESC_t *pProg; - dmacHw_CBLK_t *pCblk; - - pCblk = dmacHw_HANDLE_TO_CBLK(handle); - pRing = dmacHw_GET_DESC_RING(pDescriptor); - - if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) { - /* Not safe yet to program the channel */ - return; - } - - if (pCblk->varDataStarted) { - if (pCblk->descUpdated) { - pCblk->descUpdated = 0; - pProg = - (dmacHw_DESC_t *) ((uint32_t) - dmacHw_REG_LLP(pCblk->module, - pCblk->channel) + - pRing->virt2PhyOffset); - - /* Load descriptor if not loaded */ - if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) { - dmacHw_SET_SAR(pCblk->module, pCblk->channel, - pProg->sar); - dmacHw_SET_DAR(pCblk->module, pCblk->channel, - pProg->dar); - dmacHw_REG_CTL_LO(pCblk->module, - pCblk->channel) = - pProg->ctl.lo; - dmacHw_REG_CTL_HI(pCblk->module, - pCblk->channel) = - pProg->ctl.hi; - } else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) { - /* Return as end descriptor is processed */ - return; - } else { - dmacHw_ASSERT(0); - } - } else { - return; - } - } else { - if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) { - /* Do not make a single chain, rather process one descriptor at a time */ - pProg = pRing->pHead; - /* Point to the next descriptor for next iteration */ - dmacHw_NEXT_DESC(pRing, pHead); - } else { - /* Return if no more pending descriptor */ - if (pRing->pEnd == NULL) { - return; - } - - pProg = pRing->pProg; - if (pConfig->transferMode == - dmacHw_TRANSFER_MODE_CONTINUOUS) { - /* Make sure a complete ring can be formed */ - dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd-> - llp == pRing->pProg); - /* Make sure pProg pointing to the pHead */ - dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg == - pRing->pHead); - /* Make a complete ring */ - do { - pRing->pProg->ctl.lo |= - (dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN); - pRing->pProg = - (dmacHw_DESC_t *) pRing->pProg->llp; - } while (pRing->pProg != pRing->pHead); - } else { - /* Make a single long chain */ - while (pRing->pProg != pRing->pEnd) { - pRing->pProg->ctl.lo |= - (dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN); - pRing->pProg = - (dmacHw_DESC_t *) pRing->pProg->llp; - } - } - } - - /* Program the channel registers */ - dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar); - dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar); - dmacHw_SET_LLP(pCblk->module, pCblk->channel, - (uint32_t) pProg - pRing->virt2PhyOffset); - dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) = - pProg->ctl.lo; - dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) = - pProg->ctl.hi; - if (pRing->pEnd) { - /* Remember the descriptor to use next */ - pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp; - } - /* Indicate no more pending descriptor */ - pRing->pEnd = (dmacHw_DESC_t *) NULL; - } - /* Start DMA operation */ - dmacHw_DMA_START(pCblk->module, pCblk->channel); -} - -/****************************************************************************/ -/** -* @brief Initializes DMA -* -* This function initializes DMA CSP driver -* -* @note -* Must be called before using any DMA channel -*/ -/****************************************************************************/ -void dmacHw_initDma(void) -{ - - uint32_t i = 0; - - dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0); - dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1); - - /* Enable access to the DMA block */ - chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0); - chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1); - - if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) { - dmacHw_ASSERT(0); - } - - memset((void *)dmacHw_gCblk, 0, - sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1)); - for (i = 0; i < dmaChannelCount_0; i++) { - dmacHw_gCblk[i].module = 0; - dmacHw_gCblk[i].channel = i; - } - for (i = 0; i < dmaChannelCount_1; i++) { - dmacHw_gCblk[i + dmaChannelCount_0].module = 1; - dmacHw_gCblk[i + dmaChannelCount_0].channel = i; - } -} - -/****************************************************************************/ -/** -* @brief Exit function for DMA -* -* This function isolates DMA from the system -* -*/ -/****************************************************************************/ -void dmacHw_exitDma(void) -{ - /* Disable access to the DMA block */ - chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0); - chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1); -} - -/****************************************************************************/ -/** -* @brief Gets a handle to a DMA channel -* -* This function returns a handle, representing a control block of a particular DMA channel -* -* @return -1 - On Failure -* handle - On Success, representing a channel control block -* -* @note -* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */ - ) { - int idx; - - switch ((channelId >> 8)) { - case 0: - dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0); - idx = (channelId & 0xff); - break; - case 1: - dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1); - idx = dmaChannelCount_0 + (channelId & 0xff); - break; - default: - dmacHw_ASSERT(0); - return (dmacHw_HANDLE_t) -1; - } - - return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]); -} - -/****************************************************************************/ -/** -* @brief Initializes a DMA channel for use -* -* This function initializes and resets a DMA channel for use -* -* @return -1 - On Failure -* 0 - On Success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - int module = pCblk->module; - int channel = pCblk->channel; - - /* Reinitialize the control block */ - memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t)); - pCblk->module = module; - pCblk->channel = channel; - - /* Enable DMA controller */ - dmacHw_DMA_ENABLE(pCblk->module); - /* Reset DMA channel */ - dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel); - dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel); - dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel); - dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel); - - /* Clear all raw interrupt status */ - dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel); - - /* Mask event specific interrupts */ - dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel); - - return 0; -} - -/****************************************************************************/ -/** -* @brief Finds amount of memory required to form a descriptor ring -* -* -* @return Number of bytes required to form a descriptor ring -* -* -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */ - ) { - /* Need extra 4 byte to ensure 32 bit alignment */ - return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) + - sizeof(uint32_t); -} - -/****************************************************************************/ -/** -* @brief Initializes descriptor ring -* -* This function will initializes the descriptor ring of a DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* @note -* - "len" parameter should be obtained from "dmacHw_descriptorLen" -* - Descriptor buffer MUST be 32 bit aligned and uncached as it is -* accessed by ARM and DMA -*/ -/****************************************************************************/ -int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */ - uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */ - uint32_t len, /* [ IN ] Size of the pBuf */ - uint32_t num /* [ IN ] Number of descriptor in the ring */ - ) { - uint32_t i; - dmacHw_DESC_RING_t *pRing; - dmacHw_DESC_t *pDesc; - - /* Check the alignment of the descriptor */ - if ((uint32_t) pDescriptorVirt & 0x00000003) { - dmacHw_ASSERT(0); - return -1; - } - - /* Check if enough space has been allocated for descriptor ring */ - if (len < dmacHw_descriptorLen(num)) { - return -1; - } - - pRing = dmacHw_GET_DESC_RING(pDescriptorVirt); - pRing->pHead = - (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t)); - pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead; - pRing->pProg = dmacHw_DESC_INIT; - /* Initialize link item chain, starting from the head */ - pDesc = pRing->pHead; - /* Find the offset between virtual to physical address */ - pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr; - - /* Form the descriptor ring */ - for (i = 0; i < num - 1; i++) { - /* Clear link list item */ - memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t)); - /* Point to the next item in the physical address */ - pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset; - /* Point to the next item in the virtual address */ - pDesc->llp = (uint32_t) (pDesc + 1); - /* Mark descriptor is ready to use */ - pDesc->ctl.hi = dmacHw_DESC_FREE; - /* Look into next link list item */ - pDesc++; - } - - /* Clear last link list item */ - memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t)); - /* Last item pointing to the first item in the - physical address to complete the ring */ - pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset; - /* Last item pointing to the first item in the - virtual address to complete the ring - */ - pDesc->llp = (uint32_t) pRing->pHead; - /* Mark descriptor is ready to use */ - pDesc->ctl.hi = dmacHw_DESC_FREE; - /* Set the number of descriptors in the ring */ - pRing->num = num; - return 0; -} - -/****************************************************************************/ -/** -* @brief Configure DMA channel -* -* @return 0 : On success -* -1 : On failure -*/ -/****************************************************************************/ -int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - uint32_t cfgHigh = 0; - int srcTrSize; - int dstTrSize; - - pCblk->varDataStarted = 0; - pCblk->userData = NULL; - - /* Configure - - Burst transaction when enough data in available in FIFO - - AHB Access protection 1 - - Source and destination peripheral ports - */ - cfgHigh = - dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 | - dmacHw_SRC_PERI_INTF(pConfig-> - srcPeripheralPort) | - dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort); - /* Set priority */ - dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel, - pConfig->channelPriority); - - if (pConfig->dstStatusRegisterAddress != 0) { - /* Destination status update enable */ - cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT; - /* Configure status registers */ - dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel, - pConfig->dstStatusRegisterAddress); - } - - if (pConfig->srcStatusRegisterAddress != 0) { - /* Source status update enable */ - cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT; - /* Source status update enable */ - dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel, - pConfig->srcStatusRegisterAddress); - } - /* Configure the config high register */ - dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh; - - /* Clear all raw interrupt status */ - dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel); - - /* Configure block interrupt */ - if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) { - dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel); - } else { - dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel); - } - /* Configure complete transfer interrupt */ - if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) { - dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel); - } else { - dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel); - } - /* Configure error interrupt */ - if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) { - dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel); - } else { - dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel); - } - /* Configure gather register */ - if (pConfig->srcGatherWidth) { - srcTrSize = - dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - if (! - ((pConfig->srcGatherWidth % srcTrSize) - && (pConfig->srcGatherJump % srcTrSize))) { - dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) = - ((pConfig->srcGatherWidth / - srcTrSize) << 20) | (pConfig->srcGatherJump / - srcTrSize); - } else { - return -1; - } - } - /* Configure scatter register */ - if (pConfig->dstScatterWidth) { - dstTrSize = - dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth); - if (! - ((pConfig->dstScatterWidth % dstTrSize) - && (pConfig->dstScatterJump % dstTrSize))) { - dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) = - ((pConfig->dstScatterWidth / - dstTrSize) << 20) | (pConfig->dstScatterJump / - dstTrSize); - } else { - return -1; - } - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Indicates whether DMA transfer is in progress or completed -* -* @return DMA transfer status -* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing -* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed -* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error -* -*/ -/****************************************************************************/ -dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) { - return dmacHw_TRANSFER_STATUS_BUSY; - } else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) & - (0x00000001 << pCblk->channel)) { - return dmacHw_TRANSFER_STATUS_ERROR; - } - - return dmacHw_TRANSFER_STATUS_DONE; -} - -/****************************************************************************/ -/** -* @brief Set descriptors for known data length -* -* When DMA has to work as a flow controller, this function prepares the -* descriptor chain to transfer data -* -* from: -* - Memory to memory -* - Peripheral to memory -* - Memory to Peripheral -* - Peripheral to Peripheral -* -* @return -1 - On failure -* 0 - On success -* -*/ -/****************************************************************************/ -int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Data length in bytes */ - ) { - dmacHw_TRANSACTION_WIDTH_e dstTrWidth; - dmacHw_TRANSACTION_WIDTH_e srcTrWidth; - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - dmacHw_DESC_t *pStart; - dmacHw_DESC_t *pProg; - int srcTs = 0; - int blkTs = 0; - int oddSize = 0; - int descCount = 0; - int count = 0; - int dstTrSize = 0; - int srcTrSize = 0; - uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE; - - dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - - /* Skip Tx if buffer is NULL or length is unknown */ - if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) { - /* Do not initiate transfer */ - return -1; - } - - /* Ensure scatter and gather are transaction aligned */ - if ((pConfig->srcGatherWidth % srcTrSize) - || (pConfig->dstScatterWidth % dstTrSize)) { - return -2; - } - - /* - Background 1: DMAC can not perform DMA if source and destination addresses are - not properly aligned with the channel's transaction width. So, for successful - DMA transfer, transaction width must be set according to the alignment of the - source and destination address. - */ - - /* Adjust destination transaction width if destination address is not aligned properly */ - dstTrWidth = pConfig->dstMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) { - dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth); - dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth); - } - - /* Adjust source transaction width if source address is not aligned properly */ - srcTrWidth = pConfig->srcMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) { - srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth); - } - - /* Find the maximum transaction per descriptor */ - if (pConfig->maxDataPerBlock - && ((pConfig->maxDataPerBlock / srcTrSize) < - dmacHw_MAX_BLOCKSIZE)) { - maxBlockSize = pConfig->maxDataPerBlock / srcTrSize; - } - - /* Find number of source transactions needed to complete the DMA transfer */ - srcTs = dataLen / srcTrSize; - /* Find the odd number of bytes that need to be transferred as single byte transaction width */ - if (srcTs && (dstTrSize > srcTrSize)) { - oddSize = dataLen % dstTrSize; - /* Adjust source transaction count due to "oddSize" */ - srcTs = srcTs - (oddSize / srcTrSize); - } else { - oddSize = dataLen % srcTrSize; - } - /* Adjust "descCount" due to "oddSize" */ - if (oddSize) { - descCount++; - } - /* Find the number of descriptor needed for total "srcTs" */ - if (srcTs) { - descCount += ((srcTs - 1) / maxBlockSize) + 1; - } - - /* Check the availability of "descCount" discriptors in the ring */ - pProg = pRing->pHead; - for (count = 0; (descCount <= pRing->num) && (count < descCount); - count++) { - if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) { - /* Sufficient descriptors are not available */ - return -3; - } - pProg = (dmacHw_DESC_t *) pProg->llp; - } - - /* Remember the link list item to program the channel registers */ - pStart = pProg = pRing->pHead; - /* Make a link list with "descCount(=count)" number of descriptors */ - while (count) { - /* Reset channel control information */ - pProg->ctl.lo = 0; - /* Enable source gather if configured */ - if (pConfig->srcGatherWidth) { - pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE; - } - /* Enable destination scatter if configured */ - if (pConfig->dstScatterWidth) { - pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE; - } - /* Set source and destination address */ - pProg->sar = (uint32_t) pSrcAddr; - pProg->dar = (uint32_t) pDstAddr; - /* Use "devCtl" to mark that user memory need to be freed later if needed */ - if (pProg == pRing->pHead) { - pProg->devCtl = dmacHw_FREE_USER_MEMORY; - } else { - pProg->devCtl = 0; - } - - blkTs = srcTs; - - /* Special treatmeant for last descriptor */ - if (count == 1) { - /* Mark the last descriptor */ - pProg->ctl.lo &= - ~(dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN); - /* Treatment for odd data bytes */ - if (oddSize) { - /* Adjust for single byte transaction width */ - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - dstTrWidth = - dmacHw_DST_TRANSACTION_WIDTH_8; - blkTs = - (oddSize / srcTrSize) + - ((oddSize % srcTrSize) ? 1 : 0); - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - srcTrWidth = - dmacHw_SRC_TRANSACTION_WIDTH_8; - blkTs = oddSize; - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_MEM: - srcTrWidth = - dmacHw_SRC_TRANSACTION_WIDTH_8; - dstTrWidth = - dmacHw_DST_TRANSACTION_WIDTH_8; - blkTs = oddSize; - break; - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL: - /* Do not adjust the transaction width */ - break; - } - } else { - srcTs -= blkTs; - } - } else { - if (srcTs / maxBlockSize) { - blkTs = maxBlockSize; - } - /* Remaining source transactions for next iteration */ - srcTs -= blkTs; - } - /* Must have a valid source transactions */ - dmacHw_ASSERT(blkTs > 0); - /* Set control information */ - if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) { - pProg->ctl.lo |= pConfig->transferType | - pConfig->srcUpdate | - pConfig->dstUpdate | - srcTrWidth | - dstTrWidth | - pConfig->srcMaxBurstWidth | - pConfig->dstMaxBurstWidth | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN; - } else { - uint32_t transferType = 0; - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - transferType = dmacHw_REG_CTL_TTFC_PM_PERI; - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - transferType = dmacHw_REG_CTL_TTFC_MP_PERI; - break; - default: - dmacHw_ASSERT(0); - } - pProg->ctl.lo |= transferType | - pConfig->srcUpdate | - pConfig->dstUpdate | - srcTrWidth | - dstTrWidth | - pConfig->srcMaxBurstWidth | - pConfig->dstMaxBurstWidth | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN; - } - - /* Set block transaction size */ - pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK; - /* Look for next descriptor */ - if (count > 1) { - /* Point to the next descriptor */ - pProg = (dmacHw_DESC_t *) pProg->llp; - - /* Update source and destination address for next iteration */ - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - if (pConfig->dstScatterWidth) { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->dstScatterWidth) * - pConfig->dstScatterJump); - } else { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize; - } - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - if (pConfig->srcGatherWidth) { - pSrcAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->srcGatherWidth) * - pConfig->srcGatherJump); - } else { - pSrcAddr = - (char *)pSrcAddr + - blkTs * srcTrSize; - } - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_MEM: - if (pConfig->dstScatterWidth) { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->dstScatterWidth) * - pConfig->dstScatterJump); - } else { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize; - } - - if (pConfig->srcGatherWidth) { - pSrcAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->srcGatherWidth) * - pConfig->srcGatherJump); - } else { - pSrcAddr = - (char *)pSrcAddr + - blkTs * srcTrSize; - } - break; - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL: - /* Do not adjust the address */ - break; - default: - dmacHw_ASSERT(0); - } - } else { - /* At the end of transfer "srcTs" must be zero */ - dmacHw_ASSERT(srcTs == 0); - } - count--; - } - - /* Remember the descriptor to initialize the registers */ - if (pRing->pProg == dmacHw_DESC_INIT) { - pRing->pProg = pStart; - } - /* Indicate that the descriptor is updated */ - pRing->pEnd = pProg; - /* Head pointing to the next descriptor */ - pRing->pHead = (dmacHw_DESC_t *) pProg->llp; - /* Update Tail pointer if destination is a peripheral, - because no one is going to read from the pTail - */ - if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) { - pRing->pTail = pRing->pHead; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Provides DMA controller attributes -* -* -* @return DMA controller attributes -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - switch (attr) { - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM: - return dmacHw_GET_NUM_CHANNEL(pCblk->module); - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE: - return (1 << - (dmacHw_GET_MAX_BLOCK_SIZE - (pCblk->module, pCblk->module) + 2)) - 8; - case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM: - return dmacHw_GET_NUM_INTERFACE(pCblk->module); - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH: - return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module, - pCblk->channel); - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE: - return GetFifoSize(handle); - } - dmacHw_ASSERT(0); - return 0; -} diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c deleted file mode 100644 index a1f328357aa4..000000000000 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ /dev/null @@ -1,1017 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw_extra.c -* -* @brief Extra Low level DMA controller driver routines -* -* @note -* -* These routines provide basic DMA functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#include -#include -#include - -extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; /* Declared in dmacHw.c */ - -/* ---- External Function Prototypes ------------------------------------- */ - -/* ---- Internal Use Function Prototypes --------------------------------- */ -/****************************************************************************/ -/** -* @brief Overwrites data length in the descriptor -* -* This function overwrites data length in the descriptor -* -* -* @return void -* -* @note -* This is only used for PCM channel -*/ -/****************************************************************************/ -void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - size_t dataLen /* [ IN ] Data length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Helper function to display DMA registers -* -* @return void -* -* -* @note -* None -*/ -/****************************************************************************/ -static void DisplayRegisterContents(int module, /* [ IN ] DMA Controller unit (0-1) */ - int channel, /* [ IN ] DMA Channel (0-7) / -1(all) */ - int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */ - ) { - int chan; - - (*fpPrint) ("Displaying register content \n\n"); - (*fpPrint) ("Module %d: Interrupt raw transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt raw block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt raw src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt raw dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt raw error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: Interrupt stat transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt stat block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt stat src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt stat dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt stat error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: Interrupt mask transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt mask block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt mask src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt mask dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt mask error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: Interrupt clear transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt clear block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt clear src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt clear dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt clear error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: SW source req 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module))); - (*fpPrint) ("Module %d: SW dest req 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module))); - (*fpPrint) ("Module %d: SW source signal 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module))); - (*fpPrint) ("Module %d: SW dest signal 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module))); - (*fpPrint) ("Module %d: SW source last 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module))); - (*fpPrint) ("Module %d: SW dest last 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: misc config 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_CFG(module))); - (*fpPrint) ("Module %d: misc channel enable 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module))); - (*fpPrint) ("Module %d: misc ID 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_ID(module))); - (*fpPrint) ("Module %d: misc test 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_TEST(module))); - - if (channel == -1) { - for (chan = 0; chan < 8; chan++) { - (*fpPrint) - ("--------------------------------------------------\n"); - (*fpPrint) - ("Module %d: Channel %d Source 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Destination 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d LLP 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_LLP(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_HI(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_HI(module, chan))); - } - } else { - chan = channel; - (*fpPrint) - ("--------------------------------------------------\n"); - (*fpPrint) - ("Module %d: Channel %d Source 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Destination 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d LLP 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_HI(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_HI(module, chan))); - } -} - -/****************************************************************************/ -/** -* @brief Helper function to display descriptor ring -* -* @return void -* -* -* @note -* None -*/ -/****************************************************************************/ -static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */ - int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - dmacHw_DESC_t *pStart; - - if (pRing->pHead == NULL) { - return; - } - - pStart = pRing->pHead; - - while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) { - if (pStart == pRing->pHead) { - (*fpPrint) ("Head\n"); - } - if (pStart == pRing->pTail) { - (*fpPrint) ("Tail\n"); - } - if (pStart == pRing->pProg) { - (*fpPrint) ("Prog\n"); - } - if (pStart == pRing->pEnd) { - (*fpPrint) ("End\n"); - } - if (pStart == pRing->pFree) { - (*fpPrint) ("Free\n"); - } - (*fpPrint) ("0x%X:\n", (uint32_t) pStart); - (*fpPrint) ("sar 0x%0X\n", pStart->sar); - (*fpPrint) ("dar 0x%0X\n", pStart->dar); - (*fpPrint) ("llp 0x%0X\n", pStart->llp); - (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo); - (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi); - (*fpPrint) ("sstat 0x%0X\n", pStart->sstat); - (*fpPrint) ("dstat 0x%0X\n", pStart->dstat); - (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl); - - pStart = (dmacHw_DESC_t *) pStart->llp; - } - if (pStart == pRing->pHead) { - (*fpPrint) ("Head\n"); - } - if (pStart == pRing->pTail) { - (*fpPrint) ("Tail\n"); - } - if (pStart == pRing->pProg) { - (*fpPrint) ("Prog\n"); - } - if (pStart == pRing->pEnd) { - (*fpPrint) ("End\n"); - } - if (pStart == pRing->pFree) { - (*fpPrint) ("Free\n"); - } - (*fpPrint) ("0x%X:\n", (uint32_t) pStart); - (*fpPrint) ("sar 0x%0X\n", pStart->sar); - (*fpPrint) ("dar 0x%0X\n", pStart->dar); - (*fpPrint) ("llp 0x%0X\n", pStart->llp); - (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo); - (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi); - (*fpPrint) ("sstat 0x%0X\n", pStart->sstat); - (*fpPrint) ("dstat 0x%0X\n", pStart->dstat); - (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl); -} - -/****************************************************************************/ -/** -* @brief Check if DMA channel is the flow controller -* -* @return 1 : If DMA is a flow controller -* 0 : Peripheral is the flow controller -* -* @note -* None -*/ -/****************************************************************************/ -static inline int DmaIsFlowController(void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - uint32_t ttfc = - (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl. - lo & dmacHw_REG_CTL_TTFC_MASK; - - switch (ttfc) { - case dmacHw_REG_CTL_TTFC_MM_DMAC: - case dmacHw_REG_CTL_TTFC_MP_DMAC: - case dmacHw_REG_CTL_TTFC_PM_DMAC: - case dmacHw_REG_CTL_TTFC_PP_DMAC: - return 1; - } - - return 0; -} - -/****************************************************************************/ -/** -* @brief Overwrites data length in the descriptor -* -* This function overwrites data length in the descriptor -* -* -* @return void -* -* @note -* This is only used for PCM channel -*/ -/****************************************************************************/ -void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - size_t dataLen /* [ IN ] Data length in bytes */ - ) { - dmacHw_DESC_t *pProg; - dmacHw_DESC_t *pHead; - int srcTs = 0; - int srcTrSize = 0; - - pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead; - pProg = pHead; - - srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - srcTs = dataLen / srcTrSize; - do { - pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK; - pProg = (dmacHw_DESC_t *) pProg->llp; - } while (pProg != pHead); -} - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the DMA channel specific interrupt -* -* -* @return void -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel); -} - -/****************************************************************************/ -/** -* @brief Returns the cause of channel specific DMA interrupt -* -* This function returns the cause of interrupt -* -* @return Interrupt status, each bit representing a specific type of interrupt -* -* @note -* Should be called under the context of ISR -*/ -/****************************************************************************/ -dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE; - - if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) & - ((0x00000001 << pCblk->channel))) { - status |= dmacHw_INTERRUPT_STATUS_TRANS; - } - if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) & - ((0x00000001 << pCblk->channel))) { - status |= dmacHw_INTERRUPT_STATUS_BLOCK; - } - if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) & - ((0x00000001 << pCblk->channel))) { - status |= dmacHw_INTERRUPT_STATUS_ERROR; - } - - return status; -} - -/****************************************************************************/ -/** -* @brief Indentifies a DMA channel causing interrupt -* -* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e -* -* @return NULL : No channel causing DMA interrupt -* ! NULL : Handle to a channel causing DMA interrupt -* @note -* dmacHw_clearInterrupt() must be called with a valid handle after calling this function -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getInterruptSource(void) -{ - uint32_t i; - - for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) { - if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) & - ((0x00000001 << dmacHw_gCblk[i].channel))) - || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) & - ((0x00000001 << dmacHw_gCblk[i].channel))) - || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) & - ((0x00000001 << dmacHw_gCblk[i].channel))) - ) { - return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]); - } - } - return dmacHw_CBLK_TO_HANDLE(NULL); -} - -/****************************************************************************/ -/** -* @brief Estimates number of descriptor needed to perform certain DMA transfer -* -* -* @return On failure : -1 -* On success : Number of descriptor count -* -* -*/ -/****************************************************************************/ -int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Data length in bytes */ - ) { - int srcTs = 0; - int oddSize = 0; - int descCount = 0; - int dstTrSize = 0; - int srcTrSize = 0; - uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE; - dmacHw_TRANSACTION_WIDTH_e dstTrWidth; - dmacHw_TRANSACTION_WIDTH_e srcTrWidth; - - dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - - /* Skip Tx if buffer is NULL or length is unknown */ - if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) { - /* Do not initiate transfer */ - return -1; - } - - /* Ensure scatter and gather are transaction aligned */ - if (pConfig->srcGatherWidth % srcTrSize - || pConfig->dstScatterWidth % dstTrSize) { - return -1; - } - - /* - Background 1: DMAC can not perform DMA if source and destination addresses are - not properly aligned with the channel's transaction width. So, for successful - DMA transfer, transaction width must be set according to the alignment of the - source and destination address. - */ - - /* Adjust destination transaction width if destination address is not aligned properly */ - dstTrWidth = pConfig->dstMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) { - dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth); - dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth); - } - - /* Adjust source transaction width if source address is not aligned properly */ - srcTrWidth = pConfig->srcMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) { - srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth); - } - - /* Find the maximum transaction per descriptor */ - if (pConfig->maxDataPerBlock - && ((pConfig->maxDataPerBlock / srcTrSize) < - dmacHw_MAX_BLOCKSIZE)) { - maxBlockSize = pConfig->maxDataPerBlock / srcTrSize; - } - - /* Find number of source transactions needed to complete the DMA transfer */ - srcTs = dataLen / srcTrSize; - /* Find the odd number of bytes that need to be transferred as single byte transaction width */ - if (srcTs && (dstTrSize > srcTrSize)) { - oddSize = dataLen % dstTrSize; - /* Adjust source transaction count due to "oddSize" */ - srcTs = srcTs - (oddSize / srcTrSize); - } else { - oddSize = dataLen % srcTrSize; - } - /* Adjust "descCount" due to "oddSize" */ - if (oddSize) { - descCount++; - } - - /* Find the number of descriptor needed for total "srcTs" */ - if (srcTs) { - descCount += ((srcTs - 1) / maxBlockSize) + 1; - } - - return descCount; -} - -/****************************************************************************/ -/** -* @brief Check the existence of pending descriptor -* -* This function confirmes if there is any pending descriptor in the chain -* to program the channel -* -* @return 1 : Channel need to be programmed with pending descriptor -* 0 : No more pending descriptor to programe the channel -* -* @note -* - This function should be called from ISR in case there are pending -* descriptor to program the channel. -* -* Example: -* -* dmac_isr () -* { -* ... -* if (dmacHw_descriptorPending (handle)) -* { -* dmacHw_initiateTransfer (handle); -* } -* } -* -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - - /* Make sure channel is not busy */ - if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) { - /* Check if pEnd is not processed */ - if (pRing->pEnd) { - /* Something left for processing */ - return 1; - } - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Program channel register to stop transfer -* -* Ensures the channel is not doing any transfer after calling this function -* -* @return void -* -*/ -/****************************************************************************/ -void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk; - - pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - /* Stop the channel */ - dmacHw_DMA_STOP(pCblk->module, pCblk->channel); -} - -/****************************************************************************/ -/** -* @brief Deallocates source or destination memory, allocated -* -* This function can be called to deallocate data memory that was DMAed successfully -* -* @return On failure : -1 -* On success : Number of buffer freed -* -* @note -* This function will be called ONLY, when source OR destination address is pointing -* to dynamic memory -*/ -/****************************************************************************/ -int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - uint32_t count = 0; - - if (fpFree == NULL) { - return -1; - } - - while ((pRing->pFree != pRing->pTail) - && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) { - if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) { - /* Identify, which memory to free */ - if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) { - (*fpFree) ((void *)pRing->pFree->dar); - } else { - /* Destination was a peripheral */ - (*fpFree) ((void *)pRing->pFree->sar); - } - /* Unmark user memory to indicate it is freed */ - pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY; - } - dmacHw_NEXT_DESC(pRing, pFree); - - count++; - } - - return count; -} - -/****************************************************************************/ -/** -* @brief Prepares descriptor ring, when source peripheral working as a flow controller -* -* This function will update the discriptor ring by allocating buffers, when source peripheral -* has to work as a flow controller to transfer data from: -* - Peripheral to memory. -* -* @return On failure : -1 -* On success : Number of descriptor updated -* -* -* @note -* Channel must be configured for peripheral to memory transfer -* -*/ -/****************************************************************************/ -int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t srcAddr, /* [ IN ] Source peripheral address */ - void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */ - int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */ - int num /* [ IN ] Number of descriptor to set */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_DESC_t *pProg = NULL; - dmacHw_DESC_t *pLast = NULL; - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - uint32_t dstAddr; - uint32_t controlParam; - int i; - - dmacHw_ASSERT(pConfig->transferType == - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM); - - if (num > pRing->num) { - return -1; - } - - pLast = pRing->pEnd; /* Last descriptor updated */ - pProg = pRing->pHead; /* First descriptor in the new list */ - - controlParam = pConfig->srcUpdate | - pConfig->dstUpdate | - pConfig->srcMaxTransactionWidth | - pConfig->dstMaxTransactionWidth | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | - pConfig->srcMaxBurstWidth | - pConfig->dstMaxBurstWidth | - dmacHw_REG_CTL_TTFC_PM_PERI | - dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN; - - for (i = 0; i < num; i++) { - /* Allocate Rx buffer only for idle descriptor */ - if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) || - ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail) - ) { - /* Rx descriptor is not idle */ - break; - } - /* Set source address */ - pRing->pHead->sar = srcAddr; - if (fpAlloc) { - /* Allocate memory for buffer in descriptor */ - dstAddr = (uint32_t) (*fpAlloc) (len); - /* Check the destination address */ - if (dstAddr == 0) { - if (i == 0) { - /* Not a single descriptor is available */ - return -1; - } - break; - } - /* Set destination address */ - pRing->pHead->dar = dstAddr; - } - /* Set control information */ - pRing->pHead->ctl.lo = controlParam; - /* Use "devCtl" to mark the memory that need to be freed later */ - pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY; - /* Descriptor is now owned by the channel */ - pRing->pHead->ctl.hi = 0; - /* Remember the descriptor last updated */ - pRing->pEnd = pRing->pHead; - /* Update next descriptor */ - dmacHw_NEXT_DESC(pRing, pHead); - } - - /* Mark the end of the list */ - pRing->pEnd->ctl.lo &= - ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN); - /* Connect the list */ - if (pLast != pProg) { - pLast->ctl.lo |= - dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN; - } - /* Mark the descriptors are updated */ - pCblk->descUpdated = 1; - if (!pCblk->varDataStarted) { - /* LLP must be pointing to the first descriptor */ - dmacHw_SET_LLP(pCblk->module, pCblk->channel, - (uint32_t) pProg - pRing->virt2PhyOffset); - /* Channel, handling variable data started */ - pCblk->varDataStarted = 1; - } - - return i; -} - -/****************************************************************************/ -/** -* @brief Read data DMAed to memory -* -* This function will read data that has been DMAed to memory while transferring from: -* - Memory to memory -* - Peripheral to memory -* -* @param handle - -* @param ppBbuf - -* @param pLen - -* -* @return 0 - No more data is available to read -* 1 - More data might be available to read -* -*/ -/****************************************************************************/ -int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void **ppBbuf, /* [ OUT ] Data received */ - size_t *pLlen /* [ OUT ] Length of the data received */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - - (void)handle; - - if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) { - if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) || - (pRing->pTail == pRing->pHead) - ) { - /* No receive data available */ - *ppBbuf = (char *)NULL; - *pLlen = 0; - - return 0; - } - } - - /* Return read buffer and length */ - *ppBbuf = (char *)pRing->pTail->dar; - - /* Extract length of the received data */ - if (DmaIsFlowController(pDescriptor)) { - uint32_t srcTrSize = 0; - - switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) { - case dmacHw_REG_CTL_SRC_TR_WIDTH_8: - srcTrSize = 1; - break; - case dmacHw_REG_CTL_SRC_TR_WIDTH_16: - srcTrSize = 2; - break; - case dmacHw_REG_CTL_SRC_TR_WIDTH_32: - srcTrSize = 4; - break; - case dmacHw_REG_CTL_SRC_TR_WIDTH_64: - srcTrSize = 8; - break; - default: - dmacHw_ASSERT(0); - } - /* Calculate length from the block size */ - *pLlen = - (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) * - srcTrSize; - } else { - /* Extract length from the source peripheral */ - *pLlen = pRing->pTail->sstat; - } - - /* Advance tail to next descriptor */ - dmacHw_NEXT_DESC(pRing, pTail); - - return 1; -} - -/****************************************************************************/ -/** -* @brief Set descriptor carrying control information -* -* This function will be used to send specific control information to the device -* using the DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t ctlAddress, /* [ IN ] Address of the device control register */ - uint32_t control /* [ IN ] Device control information */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - - if (ctlAddress == 0) { - return -1; - } - - /* Check the availability of descriptors in the ring */ - if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) { - return -1; - } - /* Set control information */ - pRing->pHead->devCtl = control; - /* Set source and destination address */ - pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl; - pRing->pHead->dar = ctlAddress; - /* Set control parameters */ - if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) { - pRing->pHead->ctl.lo = pConfig->transferType | - dmacHw_SRC_ADDRESS_UPDATE_MODE_INC | - dmacHw_DST_ADDRESS_UPDATE_MODE_INC | - dmacHw_SRC_TRANSACTION_WIDTH_32 | - pConfig->dstMaxTransactionWidth | - dmacHw_SRC_BURST_WIDTH_0 | - dmacHw_DST_BURST_WIDTH_0 | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN; - } else { - uint32_t transferType = 0; - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - transferType = dmacHw_REG_CTL_TTFC_PM_PERI; - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - transferType = dmacHw_REG_CTL_TTFC_MP_PERI; - break; - default: - dmacHw_ASSERT(0); - } - pRing->pHead->ctl.lo = transferType | - dmacHw_SRC_ADDRESS_UPDATE_MODE_INC | - dmacHw_DST_ADDRESS_UPDATE_MODE_INC | - dmacHw_SRC_TRANSACTION_WIDTH_32 | - pConfig->dstMaxTransactionWidth | - dmacHw_SRC_BURST_WIDTH_0 | - dmacHw_DST_BURST_WIDTH_0 | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | - pConfig->flowControler | dmacHw_REG_CTL_INT_EN; - } - - /* Set block transaction size to one 32 bit transaction */ - pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1; - - /* Remember the descriptor to initialize the registers */ - if (pRing->pProg == dmacHw_DESC_INIT) { - pRing->pProg = pRing->pHead; - } - pRing->pEnd = pRing->pHead; - - /* Advance the descriptor */ - dmacHw_NEXT_DESC(pRing, pHead); - - /* Update Tail pointer if destination is a peripheral */ - if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) { - pRing->pTail = pRing->pHead; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Sets channel specific user data -* -* This function associates user data to a specific DMA channel -* -*/ -/****************************************************************************/ -void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *userData /* [ IN ] User data */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - pCblk->userData = userData; -} - -/****************************************************************************/ -/** -* @brief Gets channel specific user data -* -* This function returns user data specific to a DMA channel -* -* @return user data -*/ -/****************************************************************************/ -void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - return pCblk->userData; -} - -/****************************************************************************/ -/** -* @brief Resets descriptor control information -* -* @return void -*/ -/****************************************************************************/ -void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - int i; - dmacHw_DESC_RING_t *pRing; - dmacHw_DESC_t *pDesc; - - pRing = dmacHw_GET_DESC_RING(pDescriptor); - pDesc = pRing->pHead; - - for (i = 0; i < pRing->num; i++) { - /* Mark descriptor is ready to use */ - pDesc->ctl.hi = dmacHw_DESC_FREE; - /* Look into next link list item */ - pDesc++; - } - pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead; - pRing->pProg = dmacHw_DESC_INIT; -} - -/****************************************************************************/ -/** -* @brief Displays channel specific registers and other control parameters -* -* @return void -* -* -* @note -* None -*/ -/****************************************************************************/ -void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint); - DisplayDescRing(pDescriptor, fpPrint); -} diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile deleted file mode 100644 index 244a61ab7697..000000000000 --- a/arch/arm/mach-bcmring/csp/tmr/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += tmrHw.o diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c deleted file mode 100644 index 16225e43f3c3..000000000000 --- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c +++ /dev/null @@ -1,576 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file tmrHw.c -* -* @brief Low level Timer driver routines -* -* @note -* -* These routines provide basic timer functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#include -#include - -#define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0 -#define tmrHw_MILLISEC_PER_SEC (1000) - -#define tmrHw_LOW_1_RESOLUTION_COUNT (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC) -#define tmrHw_LOW_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT) -#define tmrHw_LOW_16_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 16) -#define tmrHw_LOW_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT) -#define tmrHw_LOW_256_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 256) -#define tmrHw_LOW_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT) - -#define tmrHw_HIGH_1_RESOLUTION_COUNT (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC) -#define tmrHw_HIGH_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT) -#define tmrHw_HIGH_16_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 16) -#define tmrHw_HIGH_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT) -#define tmrHw_HIGH_256_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 256) -#define tmrHw_HIGH_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT) - -static void ResetTimer(tmrHw_ID_t timerId) - __attribute__ ((section(".aramtext"))); -static int tmrHw_divide(int num, int denom) - __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Get timer capability -* -* This function returns various capabilities/attributes of a timer -* -* @return Capability -* -*/ -/****************************************************************************/ -uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */ -) { - switch (capability) { - case tmrHw_CAPABILITY_CLOCK: - return (timerId <= - 1) ? tmrHw_LOW_RESOLUTION_CLOCK : - tmrHw_HIGH_RESOLUTION_CLOCK; - case tmrHw_CAPABILITY_RESOLUTION: - return 32; - default: - return 0; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Resets a timer -* -* This function initializes timer -* -* @return void -* -*/ -/****************************************************************************/ -static void ResetTimer(tmrHw_ID_t timerId /* [ IN ] Timer Id */ -) { - /* Reset timer */ - pTmrHw[timerId].LoadValue = 0; - pTmrHw[timerId].CurrentValue = 0xFFFFFFFF; - pTmrHw[timerId].Control = 0; - pTmrHw[timerId].BackgroundLoad = 0; - /* Always configure as a 32 bit timer */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT; - /* Clear interrupt only if raw status interrupt is set */ - if (pTmrHw[timerId].RawInterruptStatus) { - pTmrHw[timerId].InterruptClear = 0xFFFFFFFF; - } -} - -/****************************************************************************/ -/** -* @brief Sets counter value for an interval in ms -* -* @return On success: Effective counter value set -* On failure: 0 -* -*/ -/****************************************************************************/ -static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */ -) { - uint32_t scale = 0; - uint32_t count = 0; - - if (timerId == 0 || timerId == 1) { - if (msec <= tmrHw_LOW_1_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - scale = tmrHw_LOW_1_RESOLUTION_COUNT; - } else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16; - scale = tmrHw_LOW_16_RESOLUTION_COUNT; - } else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256; - scale = tmrHw_LOW_256_RESOLUTION_COUNT; - } else { - return 0; - } - - count = msec * scale; - /* Set counter value */ - pTmrHw[timerId].LoadValue = count; - pTmrHw[timerId].BackgroundLoad = count; - - } else if (timerId == 2 || timerId == 3) { - if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - scale = tmrHw_HIGH_1_RESOLUTION_COUNT; - } else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16; - scale = tmrHw_HIGH_16_RESOLUTION_COUNT; - } else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256; - scale = tmrHw_HIGH_256_RESOLUTION_COUNT; - } else { - return 0; - } - - count = msec * scale; - /* Set counter value */ - pTmrHw[timerId].LoadValue = count; - pTmrHw[timerId].BackgroundLoad = count; - } - return count / scale; -} - -/****************************************************************************/ -/** -* @brief Configures a periodic timer in terms of timer interrupt rate -* -* This function initializes a periodic timer to generate specific number of -* timer interrupt per second -* -* @return On success: Effective timer frequency -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */ -) { - uint32_t resolution = 0; - uint32_t count = 0; - ResetTimer(timerId); - - /* Set timer mode periodic */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT; - /* Set timer in highest resolution */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - - if (rate && (timerId == 0 || timerId == 1)) { - if (rate > tmrHw_LOW_RESOLUTION_CLOCK) { - return 0; - } - resolution = tmrHw_LOW_RESOLUTION_CLOCK; - } else if (rate && (timerId == 2 || timerId == 3)) { - if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) { - return 0; - } else { - resolution = tmrHw_HIGH_RESOLUTION_CLOCK; - } - } else { - return 0; - } - /* Find the counter value */ - count = resolution / rate; - /* Set counter value */ - pTmrHw[timerId].LoadValue = count; - pTmrHw[timerId].BackgroundLoad = count; - - return resolution / count; -} - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt after -* certain time interval -* -* This function initializes a periodic timer to generate timer interrupt -* after every time interval in millisecond -* -* @return On success: Effective interval set in milli-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */ -) { - ResetTimer(timerId); - - /* Set timer mode periodic */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT; - - return SetTimerPeriod(timerId, msec); -} - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt just once -* after certain time interval -* -* This function initializes a periodic timer to generate a single ticks after -* certain time interval in millisecond -* -* @return On success: Effective interval set in milli-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */ -) { - ResetTimer(timerId); - - /* Set timer mode oneshot */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT; - - return SetTimerPeriod(timerId, msec); -} - -/****************************************************************************/ -/** -* @brief Configures a timer to run as a free running timer -* -* This function initializes a timer to run as a free running timer -* -* @return Timer resolution (count / sec) -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - uint32_t divider /* [ IN ] Dividing the clock frequency */ -) { - uint32_t scale = 0; - - ResetTimer(timerId); - /* Set timer as free running mode */ - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT; - - if (divider >= 64) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256; - scale = 256; - } else if (divider >= 8) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16; - scale = 16; - } else { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - scale = 1; - } - - if (timerId == 0 || timerId == 1) { - return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale); - } else if (timerId == 2 || timerId == 3) { - return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale); - } - - return 0; -} - -/****************************************************************************/ -/** -* @brief Starts a timer -* -* This function starts a preconfigured timer -* -* @return -1 - On Failure -* 0 - On Success -* -*/ -/****************************************************************************/ -int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE; - return 0; -} - -/****************************************************************************/ -/** -* @brief Stops a timer -* -* This function stops a running timer -* -* @return -1 - On Failure -* 0 - On Success -* -*/ -/****************************************************************************/ -int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE; - return 0; -} - -/****************************************************************************/ -/** -* @brief Gets current timer count -* -* This function returns the current timer value -* -* @return Current downcounting timer value -* -*/ -/****************************************************************************/ -uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - /* return 32 bit timer value */ - switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) { - case tmrHw_CONTROL_FREE_RUNNING: - if (pTmrHw[timerId].CurrentValue) { - return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue; - } - break; - case tmrHw_CONTROL_PERIODIC: - case tmrHw_CONTROL_ONESHOT: - return pTmrHw[timerId].BackgroundLoad - - pTmrHw[timerId].CurrentValue; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Gets timer count rate -* -* This function returns the number of counts per second -* -* @return Count rate -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - uint32_t divider = 0; - - switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) { - case tmrHw_CONTROL_PRESCALE_1: - divider = 1; - break; - case tmrHw_CONTROL_PRESCALE_16: - divider = 16; - break; - case tmrHw_CONTROL_PRESCALE_256: - divider = 256; - break; - default: - tmrHw_ASSERT(0); - } - - if (timerId == 0 || timerId == 1) { - return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider); - } else { - return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider); - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Enables timer interrupt -* -* This function enables the timer interrupt -* -* @return N/A -* -*/ -/****************************************************************************/ -void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE; -} - -/****************************************************************************/ -/** -* @brief Disables timer interrupt -* -* This function disable the timer interrupt -* -* @return N/A -* -*/ -/****************************************************************************/ -void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE; -} - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the timer interrupt -* -* @return N/A -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].InterruptClear = 0x1; -} - -/****************************************************************************/ -/** -* @brief Gets the interrupt status -* -* This function returns timer interrupt status -* -* @return Interrupt status -*/ -/****************************************************************************/ -tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - if (pTmrHw[timerId].InterruptStatus) { - return tmrHw_INTERRUPT_STATUS_SET; - } else { - return tmrHw_INTERRUPT_STATUS_UNSET; - } -} - -/****************************************************************************/ -/** -* @brief Indentifies a timer causing interrupt -* -* This functions returns a timer causing interrupt -* -* @return 0xFFFFFFFF : No timer causing an interrupt -* ! 0xFFFFFFFF : timer causing an interrupt -* @note -* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function -*/ -/****************************************************************************/ -tmrHw_ID_t tmrHw_getInterruptSource(void /* void */ -) { - int i; - - for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) { - if (pTmrHw[i].InterruptStatus) { - return i; - } - } - - return 0xFFFFFFFF; -} - -/****************************************************************************/ -/** -* @brief Displays specific timer registers -* -* -* @return void -* -*/ -/****************************************************************************/ -void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ -) { - (*fpPrint) ("Displaying register contents \n\n"); - (*fpPrint) ("Timer %d: Load value 0x%X\n", timerId, - pTmrHw[timerId].LoadValue); - (*fpPrint) ("Timer %d: Background load value 0x%X\n", timerId, - pTmrHw[timerId].BackgroundLoad); - (*fpPrint) ("Timer %d: Control 0x%X\n", timerId, - pTmrHw[timerId].Control); - (*fpPrint) ("Timer %d: Interrupt clear 0x%X\n", timerId, - pTmrHw[timerId].InterruptClear); - (*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId, - pTmrHw[timerId].RawInterruptStatus); - (*fpPrint) ("Timer %d: Interrupt status 0x%X\n", timerId, - pTmrHw[timerId].InterruptStatus); -} - -/****************************************************************************/ -/** -* @brief Use a timer to perform a busy wait delay for a number of usecs. -* -* @return N/A -*/ -/****************************************************************************/ -void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - unsigned long usecs /* [ IN ] usec to delay */ -) { - tmrHw_RATE_t usec_tick_rate; - tmrHw_COUNT_t start_time; - tmrHw_COUNT_t delta_time; - - start_time = tmrHw_GetCurrentCount(timerId); - usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000); - delta_time = usecs * usec_tick_rate; - - /* Busy wait */ - while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time)) - ; -} - -/****************************************************************************/ -/** -* @brief Local Divide function -* -* This function does the divide -* -* @return divide value -* -*/ -/****************************************************************************/ -static int tmrHw_divide(int num, int denom) -{ - int r; - int t = 1; - - /* Shift denom and t up to the largest value to optimize algorithm */ - /* t contains the units of each divide */ - while ((denom & 0x40000000) == 0) { /* fails if denom=0 */ - denom = denom << 1; - t = t << 1; - } - - /* Initialize the result */ - r = 0; - - do { - /* Determine if there exists a positive remainder */ - if ((num - denom) >= 0) { - /* Accumlate t to the result and calculate a new remainder */ - num = num - denom; - r = r + t; - } - /* Continue to shift denom and shift t down to 0 */ - denom = denom >> 1; - t = t >> 1; - } while (t != 0); - return r; -} diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c deleted file mode 100644 index e5fd241fccdc..000000000000 --- a/arch/arm/mach-bcmring/dma.c +++ /dev/null @@ -1,1518 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dma.c -* -* @brief Implements the DMA interface. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -/* ---- Public Variables ------------------------------------------------- */ - -/* ---- Private Constants and Types -------------------------------------- */ - -#define MAKE_HANDLE(controllerIdx, channelIdx) (((controllerIdx) << 4) | (channelIdx)) - -#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) -#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) - - -/* ---- Private Variables ------------------------------------------------ */ - -static DMA_Global_t gDMA; -static struct proc_dir_entry *gDmaDir; - -#include "dma_device.c" - -/* ---- Private Function Prototypes -------------------------------------- */ - -/* ---- Functions ------------------------------------------------------- */ - -/****************************************************************************/ -/** -* Displays information for /proc/dma/channels -*/ -/****************************************************************************/ - -static int dma_proc_read_channels(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int controllerIdx; - int channelIdx; - int limit = count - 200; - int len = 0; - DMA_Channel_t *channel; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS; - controllerIdx++) { - for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - if (len >= limit) { - break; - } - - channel = - &gDMA.controller[controllerIdx].channel[channelIdx]; - - len += - sprintf(buf + len, "%d:%d ", controllerIdx, - channelIdx); - - if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) != - 0) { - len += - sprintf(buf + len, "Dedicated for %s ", - DMA_gDeviceAttribute[channel-> - devType].name); - } else { - len += sprintf(buf + len, "Shared "); - } - - if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) { - len += sprintf(buf + len, "No ISR "); - } - - if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) { - len += sprintf(buf + len, "Fifo: 128 "); - } else { - len += sprintf(buf + len, "Fifo: 64 "); - } - - if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) { - len += - sprintf(buf + len, "InUse by %s", - DMA_gDeviceAttribute[channel-> - devType].name); -#if (DMA_DEBUG_TRACK_RESERVATION) - len += - sprintf(buf + len, " (%s:%d)", - channel->fileName, - channel->lineNum); -#endif - } else { - len += sprintf(buf + len, "Avail "); - } - - if (channel->lastDevType != DMA_DEVICE_NONE) { - len += - sprintf(buf + len, "Last use: %s ", - DMA_gDeviceAttribute[channel-> - lastDevType]. - name); - } - - len += sprintf(buf + len, "\n"); - } - } - up(&gDMA.lock); - *eof = 1; - - return len; -} - -/****************************************************************************/ -/** -* Displays information for /proc/dma/devices -*/ -/****************************************************************************/ - -static int dma_proc_read_devices(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int limit = count - 200; - int len = 0; - int devIdx; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) { - DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx]; - - if (devAttr->name == NULL) { - continue; - } - - if (len >= limit) { - break; - } - - len += sprintf(buf + len, "%-12s ", devAttr->name); - - if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) { - len += - sprintf(buf + len, "Dedicated %d:%d ", - devAttr->dedicatedController, - devAttr->dedicatedChannel); - } else { - len += sprintf(buf + len, "Shared DMA:"); - if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) { - len += sprintf(buf + len, "0"); - } - if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) { - len += sprintf(buf + len, "1"); - } - len += sprintf(buf + len, " "); - } - if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) { - len += sprintf(buf + len, "NoISR "); - } - if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) { - len += sprintf(buf + len, "Allow-128 "); - } - - len += - sprintf(buf + len, - "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n", - devAttr->numTransfers, devAttr->transferTicks, - devAttr->transferBytes, - devAttr->ring.bytesAllocated); - - } - - up(&gDMA.lock); - *eof = 1; - - return len; -} - -/****************************************************************************/ -/** -* Determines if a DMA_Device_t is "valid". -* -* @return -* TRUE - dma device is valid -* FALSE - dma device isn't valid -*/ -/****************************************************************************/ - -static inline int IsDeviceValid(DMA_Device_t device) -{ - return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES); -} - -/****************************************************************************/ -/** -* Translates a DMA handle into a pointer to a channel. -* -* @return -* non-NULL - pointer to DMA_Channel_t -* NULL - DMA Handle was invalid -*/ -/****************************************************************************/ - -static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle) -{ - int controllerIdx; - int channelIdx; - - controllerIdx = CONTROLLER_FROM_HANDLE(handle); - channelIdx = CHANNEL_FROM_HANDLE(handle); - - if ((controllerIdx > DMA_NUM_CONTROLLERS) - || (channelIdx > DMA_NUM_CHANNELS)) { - return NULL; - } - return &gDMA.controller[controllerIdx].channel[channelIdx]; -} - -/****************************************************************************/ -/** -* Interrupt handler which is called to process DMA interrupts. -*/ -/****************************************************************************/ - -static irqreturn_t dma_interrupt_handler(int irq, void *dev_id) -{ - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int irqStatus; - - channel = (DMA_Channel_t *) dev_id; - - /* Figure out why we were called, and knock down the interrupt */ - - irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle); - dmacHw_clearInterrupt(channel->dmacHwHandle); - - if ((channel->devType < 0) - || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) { - printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n", - channel->devType); - return IRQ_NONE; - } - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - /* Update stats */ - - if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) { - devAttr->transferTicks += - (timer_get_tick_count() - devAttr->transferStartTime); - } - - if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) { - printk(KERN_ERR - "dma_interrupt_handler: devType :%d DMA error (%s)\n", - channel->devType, devAttr->name); - } else { - devAttr->numTransfers++; - devAttr->transferBytes += devAttr->numBytes; - } - - /* Call any installed handler */ - - if (devAttr->devHandler != NULL) { - devAttr->devHandler(channel->devType, irqStatus, - devAttr->userData); - } - - return IRQ_HANDLED; -} - -/****************************************************************************/ -/** -* Allocates memory to hold a descriptor ring. The descriptor ring then -* needs to be populated by making one or more calls to -* dna_add_descriptors. -* -* The returned descriptor ring will be automatically initialized. -* -* @return -* 0 Descriptor ring was allocated successfully -* -EINVAL Invalid parameters passed in -* -ENOMEM Unable to allocate memory for the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */ - int numDescriptors /* Number of descriptors that need to be allocated. */ - ) { - size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors); - - if ((ring == NULL) || (numDescriptors <= 0)) { - return -EINVAL; - } - - ring->physAddr = 0; - ring->descriptorsAllocated = 0; - ring->bytesAllocated = 0; - - ring->virtAddr = dma_alloc_writecombine(NULL, - bytesToAlloc, - &ring->physAddr, - GFP_KERNEL); - if (ring->virtAddr == NULL) { - return -ENOMEM; - } - - ring->bytesAllocated = bytesToAlloc; - ring->descriptorsAllocated = numDescriptors; - - return dma_init_descriptor_ring(ring, numDescriptors); -} - -EXPORT_SYMBOL(dma_alloc_descriptor_ring); - -/****************************************************************************/ -/** -* Releases the memory which was previously allocated for a descriptor ring. -*/ -/****************************************************************************/ - -void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */ - ) { - if (ring->virtAddr != NULL) { - dma_free_writecombine(NULL, - ring->bytesAllocated, - ring->virtAddr, ring->physAddr); - } - - ring->bytesAllocated = 0; - ring->descriptorsAllocated = 0; - ring->virtAddr = NULL; - ring->physAddr = 0; -} - -EXPORT_SYMBOL(dma_free_descriptor_ring); - -/****************************************************************************/ -/** -* Initializes a descriptor ring, so that descriptors can be added to it. -* Once a descriptor ring has been allocated, it may be reinitialized for -* use with additional/different regions of memory. -* -* Note that if 7 descriptors are allocated, it's perfectly acceptable to -* initialize the ring with a smaller number of descriptors. The amount -* of memory allocated for the descriptor ring will not be reduced, and -* the descriptor ring may be reinitialized later -* -* @return -* 0 Descriptor ring was initialized successfully -* -ENOMEM The descriptor which was passed in has insufficient space -* to hold the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */ - int numDescriptors /* Number of descriptors to initialize. */ - ) { - if (ring->virtAddr == NULL) { - return -EINVAL; - } - if (dmacHw_initDescriptor(ring->virtAddr, - ring->physAddr, - ring->bytesAllocated, numDescriptors) < 0) { - printk(KERN_ERR - "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n"); - return -ENOMEM; - } - - return 0; -} - -EXPORT_SYMBOL(dma_init_descriptor_ring); - -/****************************************************************************/ -/** -* Determines the number of descriptors which would be required for a -* transfer of the indicated memory region. -* -* This function also needs to know which DMA device this transfer will -* be destined for, so that the appropriate DMA configuration can be retrieved. -* DMA parameters such as transfer width, and whether this is a memory-to-memory -* or memory-to-peripheral, etc can all affect the actual number of descriptors -* required. -* -* @return -* > 0 Returns the number of descriptors required for the indicated transfer -* -ENODEV - Device handed in is invalid. -* -EINVAL Invalid parameters -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - int numDescriptors; - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config, - (void *)srcData, - (void *)dstData, - numBytes); - if (numDescriptors < 0) { - printk(KERN_ERR - "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n"); - return -EINVAL; - } - - return numDescriptors; -} - -EXPORT_SYMBOL(dma_calculate_descriptor_count); - -/****************************************************************************/ -/** -* Adds a region of memory to the descriptor ring. Note that it may take -* multiple descriptors for each region of memory. It is the callers -* responsibility to allocate a sufficiently large descriptor ring. -* -* @return -* 0 Descriptors were added successfully -* -ENODEV Device handed in is invalid. -* -EINVAL Invalid parameters -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */ - DMA_Device_t device, /* DMA Device that descriptors are for */ - dma_addr_t srcData, /* Place to get data (memory or device) */ - dma_addr_t dstData, /* Place to put data (memory or device) */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - int rc; - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - rc = dmacHw_setDataDescriptor(&devAttr->config, - ring->virtAddr, - (void *)srcData, - (void *)dstData, numBytes); - if (rc < 0) { - printk(KERN_ERR - "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n", - rc); - return -ENOMEM; - } - - return 0; -} - -EXPORT_SYMBOL(dma_add_descriptors); - -/****************************************************************************/ -/** -* Sets the descriptor ring associated with a device. -* -* Once set, the descriptor ring will be associated with the device, even -* across channel request/free calls. Passing in a NULL descriptor ring -* will release any descriptor ring currently associated with the device. -* -* Note: If you call dma_transfer, or one of the other dma_alloc_ functions -* the descriptor ring may be released and reallocated. -* -* Note: This function will release the descriptor memory for any current -* descriptor ring associated with this device. -* -* @return -* 0 Descriptors were added successfully -* -ENODEV Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */ - ) { - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - /* Free the previously allocated descriptor ring */ - - dma_free_descriptor_ring(&devAttr->ring); - - if (ring != NULL) { - /* Copy in the new one */ - - devAttr->ring = *ring; - } - - /* Set things up so that if dma_transfer is called then this descriptor */ - /* ring will get freed. */ - - devAttr->prevSrcData = 0; - devAttr->prevDstData = 0; - devAttr->prevNumBytes = 0; - - return 0; -} - -EXPORT_SYMBOL(dma_set_device_descriptor_ring); - -/****************************************************************************/ -/** -* Retrieves the descriptor ring associated with a device. -* -* @return -* 0 Descriptors were added successfully -* -ENODEV Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Place to store retrieved ring */ - ) { - DMA_DeviceAttribute_t *devAttr; - - memset(ring, 0, sizeof(*ring)); - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - *ring = devAttr->ring; - - return 0; -} - -EXPORT_SYMBOL(dma_get_device_descriptor_ring); - -/****************************************************************************/ -/** -* Configures a DMA channel. -* -* @return -* >= 0 - Initialization was successful. -* -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -static int ConfigChannel(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int controllerIdx; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[channel->devType]; - controllerIdx = CONTROLLER_FROM_HANDLE(handle); - - if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) { - if (devAttr->config.transferType == - dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) { - devAttr->config.dstPeripheralPort = - devAttr->dmacPort[controllerIdx]; - } else if (devAttr->config.transferType == - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) { - devAttr->config.srcPeripheralPort = - devAttr->dmacPort[controllerIdx]; - } - } - - if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) { - printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n"); - return -EIO; - } - - return 0; -} - -/****************************************************************************/ -/** -* Initializes all of the data structures associated with the DMA. -* @return -* >= 0 - Initialization was successful. -* -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_init(void) -{ - int rc = 0; - int controllerIdx; - int channelIdx; - DMA_Device_t devIdx; - DMA_Channel_t *channel; - DMA_Handle_t dedicatedHandle; - - memset(&gDMA, 0, sizeof(gDMA)); - - sema_init(&gDMA.lock, 0); - init_waitqueue_head(&gDMA.freeChannelQ); - - /* Initialize the Hardware */ - - dmacHw_initDma(); - - /* Start off by marking all of the DMA channels as shared. */ - - for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS; - controllerIdx++) { - for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - channel = - &gDMA.controller[controllerIdx].channel[channelIdx]; - - channel->flags = 0; - channel->devType = DMA_DEVICE_NONE; - channel->lastDevType = DMA_DEVICE_NONE; - -#if (DMA_DEBUG_TRACK_RESERVATION) - channel->fileName = ""; - channel->lineNum = 0; -#endif - - channel->dmacHwHandle = - dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID - (controllerIdx, - channelIdx)); - dmacHw_initChannel(channel->dmacHwHandle); - } - } - - /* Record any special attributes that channels may have */ - - gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - - /* Now walk through and record the dedicated channels. */ - - for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) { - DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx]; - - if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) - && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) { - printk(KERN_ERR - "DMA Device: %s Can only request NO_ISR for dedicated devices\n", - devAttr->name); - rc = -EINVAL; - goto out; - } - - if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) { - /* This is a dedicated device. Mark the channel as being reserved. */ - - if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) { - printk(KERN_ERR - "DMA Device: %s DMA Controller %d is out of range\n", - devAttr->name, - devAttr->dedicatedController); - rc = -EINVAL; - goto out; - } - - if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) { - printk(KERN_ERR - "DMA Device: %s DMA Channel %d is out of range\n", - devAttr->name, - devAttr->dedicatedChannel); - rc = -EINVAL; - goto out; - } - - dedicatedHandle = - MAKE_HANDLE(devAttr->dedicatedController, - devAttr->dedicatedChannel); - channel = HandleToChannel(dedicatedHandle); - - if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) != - 0) { - printk - ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n", - devAttr->name, - devAttr->dedicatedController, - devAttr->dedicatedChannel, - DMA_gDeviceAttribute[channel->devType]. - name); - rc = -EBUSY; - goto out; - } - - channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED; - channel->devType = devIdx; - - if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) { - channel->flags |= DMA_CHANNEL_FLAG_NO_ISR; - } - - /* For dedicated channels, we can go ahead and configure the DMA channel now */ - /* as well. */ - - ConfigChannel(dedicatedHandle); - } - } - - /* Go through and register the interrupt handlers */ - - for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS; - controllerIdx++) { - for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - channel = - &gDMA.controller[controllerIdx].channel[channelIdx]; - - if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) { - snprintf(channel->name, sizeof(channel->name), - "dma %d:%d %s", controllerIdx, - channelIdx, - channel->devType == - DMA_DEVICE_NONE ? "" : - DMA_gDeviceAttribute[channel->devType]. - name); - - rc = - request_irq(IRQ_DMA0C0 + - (controllerIdx * - DMA_NUM_CHANNELS) + - channelIdx, - dma_interrupt_handler, - IRQF_DISABLED, channel->name, - channel); - if (rc != 0) { - printk(KERN_ERR - "request_irq for IRQ_DMA%dC%d failed\n", - controllerIdx, channelIdx); - } - } - } - } - - /* Create /proc/dma/channels and /proc/dma/devices */ - - gDmaDir = proc_mkdir("dma", NULL); - - if (gDmaDir == NULL) { - printk(KERN_ERR "Unable to create /proc/dma\n"); - } else { - create_proc_read_entry("channels", 0, gDmaDir, - dma_proc_read_channels, NULL); - create_proc_read_entry("devices", 0, gDmaDir, - dma_proc_read_devices, NULL); - } - -out: - - up(&gDMA.lock); - - return rc; -} - -/****************************************************************************/ -/** -* Reserves a channel for use with @a dev. If the device is setup to use -* a shared channel, then this function will block until a free channel -* becomes available. -* -* @return -* >= 0 - A valid DMA Handle. -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -#if (DMA_DEBUG_TRACK_RESERVATION) -DMA_Handle_t dma_request_channel_dbg - (DMA_Device_t dev, const char *fileName, int lineNum) -#else -DMA_Handle_t dma_request_channel(DMA_Device_t dev) -#endif -{ - DMA_Handle_t handle; - DMA_DeviceAttribute_t *devAttr; - DMA_Channel_t *channel; - int controllerIdx; - int controllerIdx2; - int channelIdx; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) { - handle = -ENODEV; - goto out; - } - devAttr = &DMA_gDeviceAttribute[dev]; - -#if (DMA_DEBUG_TRACK_RESERVATION) - { - char *s; - - s = strrchr(fileName, '/'); - if (s != NULL) { - fileName = s + 1; - } - } -#endif - if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) { - /* This device has already been requested and not been freed */ - - printk(KERN_ERR "%s: device %s is already requested\n", - __func__, devAttr->name); - handle = -EBUSY; - goto out; - } - - if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) { - /* This device has a dedicated channel. */ - - channel = - &gDMA.controller[devAttr->dedicatedController]. - channel[devAttr->dedicatedChannel]; - if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) { - handle = -EBUSY; - goto out; - } - - channel->flags |= DMA_CHANNEL_FLAG_IN_USE; - devAttr->flags |= DMA_DEVICE_FLAG_IN_USE; - -#if (DMA_DEBUG_TRACK_RESERVATION) - channel->fileName = fileName; - channel->lineNum = lineNum; -#endif - handle = - MAKE_HANDLE(devAttr->dedicatedController, - devAttr->dedicatedChannel); - goto out; - } - - /* This device needs to use one of the shared channels. */ - - handle = DMA_INVALID_HANDLE; - while (handle == DMA_INVALID_HANDLE) { - /* Scan through the shared channels and see if one is available */ - - for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS; - controllerIdx2++) { - /* Check to see if we should try on controller 1 first. */ - - controllerIdx = controllerIdx2; - if ((devAttr-> - flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) { - controllerIdx = 1 - controllerIdx; - } - - /* See if the device is available on the controller being tested */ - - if ((devAttr-> - flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx)) - != 0) { - for (channelIdx = 0; - channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - channel = - &gDMA.controller[controllerIdx]. - channel[channelIdx]; - - if (((channel-> - flags & - DMA_CHANNEL_FLAG_IS_DEDICATED) == - 0) - && - ((channel-> - flags & DMA_CHANNEL_FLAG_IN_USE) - == 0)) { - if (((channel-> - flags & - DMA_CHANNEL_FLAG_LARGE_FIFO) - != 0) - && - ((devAttr-> - flags & - DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) - == 0)) { - /* This channel is a large fifo - don't tie it up */ - /* with devices that we don't want using it. */ - - continue; - } - - channel->flags |= - DMA_CHANNEL_FLAG_IN_USE; - channel->devType = dev; - devAttr->flags |= - DMA_DEVICE_FLAG_IN_USE; - -#if (DMA_DEBUG_TRACK_RESERVATION) - channel->fileName = fileName; - channel->lineNum = lineNum; -#endif - handle = - MAKE_HANDLE(controllerIdx, - channelIdx); - - /* Now that we've reserved the channel - we can go ahead and configure it */ - - if (ConfigChannel(handle) != 0) { - handle = -EIO; - printk(KERN_ERR - "dma_request_channel: ConfigChannel failed\n"); - } - goto out; - } - } - } - } - - /* No channels are currently available. Let's wait for one to free up. */ - - { - DEFINE_WAIT(wait); - - prepare_to_wait(&gDMA.freeChannelQ, &wait, - TASK_INTERRUPTIBLE); - up(&gDMA.lock); - schedule(); - finish_wait(&gDMA.freeChannelQ, &wait); - - if (signal_pending(current)) { - /* We don't currently hold gDMA.lock, so we return directly */ - - return -ERESTARTSYS; - } - } - - if (down_interruptible(&gDMA.lock)) { - return -ERESTARTSYS; - } - } - -out: - up(&gDMA.lock); - - return handle; -} - -/* Create both _dbg and non _dbg functions for modules. */ - -#if (DMA_DEBUG_TRACK_RESERVATION) -#undef dma_request_channel -DMA_Handle_t dma_request_channel(DMA_Device_t dev) -{ - return dma_request_channel_dbg(dev, __FILE__, __LINE__); -} - -EXPORT_SYMBOL(dma_request_channel_dbg); -#endif -EXPORT_SYMBOL(dma_request_channel); - -/****************************************************************************/ -/** -* Frees a previously allocated DMA Handle. -*/ -/****************************************************************************/ - -int dma_free_channel(DMA_Handle_t handle /* DMA handle. */ - ) { - int rc = 0; - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - channel = HandleToChannel(handle); - if (channel == NULL) { - rc = -EINVAL; - goto out; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) { - channel->lastDevType = channel->devType; - channel->devType = DMA_DEVICE_NONE; - } - channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE; - devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE; - -out: - up(&gDMA.lock); - - wake_up_interruptible(&gDMA.freeChannelQ); - - return rc; -} - -EXPORT_SYMBOL(dma_free_channel); - -/****************************************************************************/ -/** -* Determines if a given device has been configured as using a shared -* channel. -* -* @return -* 0 Device uses a dedicated channel -* > zero Device uses a shared channel -* < zero Error code -*/ -/****************************************************************************/ - -int dma_device_is_channel_shared(DMA_Device_t device /* Device to check. */ - ) { - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0); -} - -EXPORT_SYMBOL(dma_device_is_channel_shared); - -/****************************************************************************/ -/** -* Allocates buffers for the descriptors. This is normally done automatically -* but needs to be done explicitly when initiating a dma from interrupt -* context. -* -* @return -* 0 Descriptors were allocated successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int numDescriptors; - size_t ringBytesRequired; - int rc = 0; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - if (devAttr->config.transferType != transferType) { - return -EINVAL; - } - - /* Figure out how many descriptors we need. */ - - /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */ - /* srcData, dstData, numBytes); */ - - numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config, - (void *)srcData, - (void *)dstData, - numBytes); - if (numDescriptors < 0) { - printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n", - __func__); - return -EINVAL; - } - - /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */ - /* a new one. */ - - ringBytesRequired = dmacHw_descriptorLen(numDescriptors); - - /* printk("ringBytesRequired: %d\n", ringBytesRequired); */ - - if (ringBytesRequired > devAttr->ring.bytesAllocated) { - /* Make sure that this code path is never taken from interrupt context. */ - /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */ - /* allocation needs to have already been done. */ - - might_sleep(); - - /* Free the old descriptor ring and allocate a new one. */ - - dma_free_descriptor_ring(&devAttr->ring); - - /* And allocate a new one. */ - - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring(%d) failed\n", - __func__, numDescriptors); - return rc; - } - /* Setup the descriptor for this transfer */ - - if (dmacHw_initDescriptor(devAttr->ring.virtAddr, - devAttr->ring.physAddr, - devAttr->ring.bytesAllocated, - numDescriptors) < 0) { - printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", - __func__); - return -EINVAL; - } - } else { - /* We've already got enough ring buffer allocated. All we need to do is reset */ - /* any control information, just in case the previous DMA was stopped. */ - - dmacHw_resetDescriptorControl(devAttr->ring.virtAddr); - } - - /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */ - /* as last time, then we don't need to call setDataDescriptor again. */ - - if (dmacHw_setDataDescriptor(&devAttr->config, - devAttr->ring.virtAddr, - (void *)srcData, - (void *)dstData, numBytes) < 0) { - printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n", - __func__); - return -EINVAL; - } - - /* Remember the critical information for this transfer so that we can eliminate */ - /* another call to dma_alloc_descriptors if the caller reuses the same buffers */ - - devAttr->prevSrcData = srcData; - devAttr->prevDstData = dstData; - devAttr->prevNumBytes = numBytes; - - return 0; -} - -EXPORT_SYMBOL(dma_alloc_descriptors); - -/****************************************************************************/ -/** -* Allocates and sets up descriptors for a double buffered circular buffer. -* -* This is primarily intended to be used for things like the ingress samples -* from a microphone. -* -* @return -* > 0 Number of descriptors actually allocated. -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Physical address of source data */ - dma_addr_t dstData1, /* Physical address of first destination buffer */ - dma_addr_t dstData2, /* Physical address of second destination buffer */ - size_t numBytes /* Number of bytes in each destination buffer */ - ) { - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int numDst1Descriptors; - int numDst2Descriptors; - int numDescriptors; - size_t ringBytesRequired; - int rc = 0; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - /* Figure out how many descriptors we need. */ - - /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */ - /* srcData, dstData, numBytes); */ - - numDst1Descriptors = - dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData, - (void *)dstData1, numBytes); - if (numDst1Descriptors < 0) { - return -EINVAL; - } - numDst2Descriptors = - dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData, - (void *)dstData2, numBytes); - if (numDst2Descriptors < 0) { - return -EINVAL; - } - numDescriptors = numDst1Descriptors + numDst2Descriptors; - /* printk("numDescriptors: %d\n", numDescriptors); */ - - /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */ - /* a new one. */ - - ringBytesRequired = dmacHw_descriptorLen(numDescriptors); - - /* printk("ringBytesRequired: %d\n", ringBytesRequired); */ - - if (ringBytesRequired > devAttr->ring.bytesAllocated) { - /* Make sure that this code path is never taken from interrupt context. */ - /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */ - /* allocation needs to have already been done. */ - - might_sleep(); - - /* Free the old descriptor ring and allocate a new one. */ - - dma_free_descriptor_ring(&devAttr->ring); - - /* And allocate a new one. */ - - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring(%d) failed\n", - __func__, ringBytesRequired); - return rc; - } - } - - /* Setup the descriptor for this transfer. Since this function is used with */ - /* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */ - /* setDataDescriptor will keep trying to append onto the end. */ - - if (dmacHw_initDescriptor(devAttr->ring.virtAddr, - devAttr->ring.physAddr, - devAttr->ring.bytesAllocated, - numDescriptors) < 0) { - printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__); - return -EINVAL; - } - - /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */ - /* as last time, then we don't need to call setDataDescriptor again. */ - - if (dmacHw_setDataDescriptor(&devAttr->config, - devAttr->ring.virtAddr, - (void *)srcData, - (void *)dstData1, numBytes) < 0) { - printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n", - __func__); - return -EINVAL; - } - if (dmacHw_setDataDescriptor(&devAttr->config, - devAttr->ring.virtAddr, - (void *)srcData, - (void *)dstData2, numBytes) < 0) { - printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n", - __func__); - return -EINVAL; - } - - /* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */ - /* try to make the 'prev' variables right. */ - - devAttr->prevSrcData = 0; - devAttr->prevDstData = 0; - devAttr->prevNumBytes = 0; - - return numDescriptors; -} - -EXPORT_SYMBOL(dma_alloc_double_dst_descriptors); - -/****************************************************************************/ -/** -* Initiates a transfer when the descriptors have already been setup. -* -* This is a special case, and normally, the dma_transfer_xxx functions should -* be used. -* -* @return -* 0 Transfer was started successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_start_transfer(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config, - devAttr->ring.virtAddr); - - /* Since we got this far, everything went successfully */ - - return 0; -} - -EXPORT_SYMBOL(dma_start_transfer); - -/****************************************************************************/ -/** -* Stops a previously started DMA transfer. -* -* @return -* 0 Transfer was stopped successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_stop_transfer(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - dmacHw_stopTransfer(channel->dmacHwHandle); - - return 0; -} - -EXPORT_SYMBOL(dma_stop_transfer); - -/****************************************************************************/ -/** -* Waits for a DMA to complete by polling. This function is only intended -* to be used for testing. Interrupts should be used for most DMA operations. -*/ -/****************************************************************************/ - -int dma_wait_transfer_done(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - dmacHw_TRANSFER_STATUS_e status; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - while ((status = - dmacHw_transferCompleted(channel->dmacHwHandle)) == - dmacHw_TRANSFER_STATUS_BUSY) { - ; - } - - if (status == dmacHw_TRANSFER_STATUS_ERROR) { - printk(KERN_ERR "%s: DMA transfer failed\n", __func__); - return -EIO; - } - return 0; -} - -EXPORT_SYMBOL(dma_wait_transfer_done); - -/****************************************************************************/ -/** -* Initiates a DMA, allocating the descriptors as required. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV) -*/ -/****************************************************************************/ - -int dma_transfer(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int rc = 0; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - if (devAttr->config.transferType != transferType) { - return -EINVAL; - } - - /* We keep track of the information about the previous request for this */ - /* device, and if the attributes match, then we can use the descriptors we setup */ - /* the last time, and not have to reinitialize everything. */ - - { - rc = - dma_alloc_descriptors(handle, transferType, srcData, - dstData, numBytes); - if (rc != 0) { - return rc; - } - } - - /* And kick off the transfer */ - - devAttr->numBytes = numBytes; - devAttr->transferStartTime = timer_get_tick_count(); - - dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config, - devAttr->ring.virtAddr); - - /* Since we got this far, everything went successfully */ - - return 0; -} - -EXPORT_SYMBOL(dma_transfer); - -/****************************************************************************/ -/** -* Set the callback function which will be called when a transfer completes. -* If a NULL callback function is set, then no callback will occur. -* -* @note @a devHandler will be called from IRQ context. -* -* @return -* 0 - Success -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */ - DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */ - void *userData /* Pointer which will be passed to devHandler. */ - ) { - DMA_DeviceAttribute_t *devAttr; - unsigned long flags; - - if (!IsDeviceValid(dev)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[dev]; - - local_irq_save(flags); - - devAttr->userData = userData; - devAttr->devHandler = devHandler; - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(dma_set_device_handler); diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c deleted file mode 100644 index ca0ad736870b..000000000000 --- a/arch/arm/mach-bcmring/dma_device.c +++ /dev/null @@ -1,593 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dma_device.c -* -* @brief private array of DMA_DeviceAttribute_t -*/ -/****************************************************************************/ - -DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = { - [DMA_DEVICE_MEM_TO_MEM] = /* MEM 2 MEM */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "mem-to-mem", - .config = { - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - - }, - }, - [DMA_DEVICE_VPM_MEM_TO_MEM] = /* VPM */ - { - .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR, - .name = "vpm", - .dedicatedController = 0, - .dedicatedChannel = 0, - /* reserve DMA0:0 for VPM */ - }, - [DMA_DEVICE_NAND_MEM_TO_MEM] = /* NAND */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "nand", - .config = { - .srcPeripheralPort = 0, - .dstPeripheralPort = 0, - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_6, - }, - }, - [DMA_DEVICE_PIF_MEM_TO_DEV] = /* PIF TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1 - | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO - | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC, - .name = "pif_tx", - .dmacPort = {14, 5}, - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - /* dstPeripheralPort = 5 or 14 */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .maxDataPerBlock = 16256, - }, - }, - [DMA_DEVICE_PIF_DEV_TO_MEM] = /* PIF RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1 - | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO - /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */ - | DMA_DEVICE_FLAG_PORT_PER_DMAC, - .name = "pif_rx", - .dmacPort = {14, 5}, - .config = { - /* srcPeripheralPort = 5 or 14 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .maxDataPerBlock = 16256, - }, - }, - [DMA_DEVICE_I2S0_DEV_TO_MEM] = /* I2S RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "i2s0_rx", - .config = { - .srcPeripheralPort = 0, /* SRC: I2S0 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_I2S0_MEM_TO_DEV] = /* I2S TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "i2s0_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 1, /* DST: I2S0 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_I2S1_DEV_TO_MEM] = /* I2S1 RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "i2s1_rx", - .config = { - .srcPeripheralPort = 2, /* SRC: I2S1 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_I2S1_MEM_TO_DEV] = /* I2S1 TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "i2s1_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 3, /* DST: I2S1 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_ESW_MEM_TO_DEV] = /* ESW TX */ - { - .name = "esw_tx", - .flags = DMA_DEVICE_FLAG_IS_DEDICATED, - .dedicatedController = 1, - .dedicatedChannel = 3, - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 1, /* DST: ESW (MTP) */ - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_DISABLE, - /* DMAx_AHB_SSTATARy */ - .srcStatusRegisterAddress = 0x00000000, - /* DMAx_AHB_DSTATARy */ - .dstStatusRegisterAddress = 0x30490010, - /* DMAx_AHB_CFGy */ - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - /* DMAx_AHB_CTLy */ - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - }, - }, - [DMA_DEVICE_ESW_DEV_TO_MEM] = /* ESW RX */ - { - .name = "esw_rx", - .flags = DMA_DEVICE_FLAG_IS_DEDICATED, - .dedicatedController = 1, - .dedicatedChannel = 2, - .config = { - .srcPeripheralPort = 0, /* SRC: ESW (PTM) */ - .dstPeripheralPort = 0, /* DST: memory */ - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_DISABLE, - /* DMAx_AHB_SSTATARy */ - .srcStatusRegisterAddress = 0x30480010, - /* DMAx_AHB_DSTATARy */ - .dstStatusRegisterAddress = 0x00000000, - /* DMAx_AHB_CFGy */ - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - /* DMAx_AHB_CTLy */ - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - }, - }, - [DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] = /* APM Codec A Ingress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_a_rx", - .config = { - .srcPeripheralPort = 2, /* SRC: Codec A Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] = /* APM Codec A Egress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_a_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 3, /* DST: Codec A Egress FIFO */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] = /* APM Codec B Ingress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_b_rx", - .config = { - .srcPeripheralPort = 4, /* SRC: Codec B Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] = /* APM Codec B Egress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_b_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 5, /* DST: Codec B Egress FIFO */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] = /* APM Codec C Ingress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "apm_c_rx", - .config = { - .srcPeripheralPort = 4, /* SRC: Codec C Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_PCM0_DEV_TO_MEM] = /* PCM0 RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "pcm0_rx", - .config = { - .srcPeripheralPort = 12, /* SRC: PCM0 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_PCM0_MEM_TO_DEV] = /* PCM0 TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "pcm0_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 13, /* DST: PCM0 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_APM_PCM1_DEV_TO_MEM] = /* PCM1 RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "pcm1_rx", - .config = { - .srcPeripheralPort = 14, /* SRC: PCM1 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_PCM1_MEM_TO_DEV] = /* PCM1 TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "pcm1_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 15, /* DST: PCM1 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_SPUM_DEV_TO_MEM] = /* SPUM RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "spum_rx", - .config = { - .srcPeripheralPort = 6, /* SRC: Codec A Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - /* Busrt size **MUST** be 16 for SPUM to work */ - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - /* on the RX side, SPU needs to be the flow controller */ - .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL, - }, - }, - [DMA_DEVICE_SPUM_MEM_TO_DEV] = /* SPUM TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "spum_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 7, /* DST: SPUM */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - /* Busrt size **MUST** be 16 for SPUM to work */ - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_MEM_TO_VRAM] = /* MEM 2 VRAM */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "mem-to-vram", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - }, - }, - [DMA_DEVICE_VRAM_TO_MEM] = /* VRAM 2 MEM */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "vram-to-mem", - .config = { - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - }, - }, -}; -EXPORT_SYMBOL(DMA_gDeviceAttribute); /* primarily for dma-test.c */ diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h deleted file mode 100644 index b5beb0b30734..000000000000 --- a/arch/arm/mach-bcmring/include/cfg_global_defines.h +++ /dev/null @@ -1,40 +0,0 @@ -/***************************************************************************** -* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CFG_GLOBAL_DEFINES_H -#define CFG_GLOBAL_DEFINES_H - -/* CHIP */ -#define BCM1103 1 - -#define BCM1191 4 -#define BCM2153 5 -#define BCM2820 6 - -#define BCM2826 8 -#define FPGA11107 9 -#define BCM11107 10 -#define BCM11109 11 -#define BCM11170 12 -#define BCM11110 13 -#define BCM11211 14 - -/* CFG_GLOBAL_CHIP_FAMILY types */ -#define CFG_GLOBAL_CHIP_FAMILY_NONE 0 -#define CFG_GLOBAL_CHIP_FAMILY_BCM116X 2 -#define CFG_GLOBAL_CHIP_FAMILY_BCMRING 4 -#define CFG_GLOBAL_CHIP_FAMILY_BCM1103 8 - -#define IMAGE_HEADER_SIZE_CHECKSUM 4 -#endif diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h deleted file mode 100644 index e6a1dc484ca7..000000000000 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ /dev/null @@ -1,596 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw.h -* -* @brief API definitions for low level DMA controller driver -* -*/ -/****************************************************************************/ -#ifndef _DMACHW_H -#define _DMACHW_H - -#include - -#include -#include - -/* Define DMA Channel ID using DMA controller number (m) and channel number (c). - - System specific channel ID should be defined as follows - - For example: - - #include - ... - #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5) - #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0) - #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1) - #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3) - #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4) - ... - #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4) - #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5) - #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6) - ... -*/ -#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c) - -typedef enum { - dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */ - dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */ - dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */ - dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */ - dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */ - dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */ - dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */ - dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */ -} dmacHw_CHANNEL_PRIORITY_e; - -/* Source destination master interface */ -typedef enum { - dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */ - dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */ - dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */ - dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */ -} dmacHw_MASTER_INTERFACE_e; - -typedef enum { - dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */ -} dmacHw_TRANSACTION_WIDTH_e; - -typedef enum { - dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */ - dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */ - dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ -} dmacHw_BURST_WIDTH_e; - -typedef enum { - dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */ - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */ - dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */ - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */ -} dmacHw_TRANSFER_TYPE_e; - -typedef enum { - dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */ - dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */ - dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */ -} dmacHw_TRANSFER_MODE_e; - -typedef enum { - dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */ - dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */ - dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */ -} dmacHw_ADDRESS_UPDATE_MODE_e; - -typedef enum { - dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */ - dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */ -} dmacHw_FLOW_CONTROL_e; - -typedef enum { - dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */ - dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */ - dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */ -} dmacHw_TRANSFER_STATUS_e; - -typedef enum { - dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */ - dmacHw_INTERRUPT_ENABLE /* Interrupt enable */ -} dmacHw_INTERRUPT_e; - -typedef enum { - dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */ - dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */ - dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */ - dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */ -} dmacHw_INTERRUPT_STATUS_e; - -typedef enum { - dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */ - dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */ -} dmacHw_CONTROLLER_ATTRIB_e; - -typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */ -typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using - "dmacHw_MAKE_CHANNEL_ID" macro - */ -/* DMA channel configuration parameters */ -typedef struct { - uint32_t srcPeripheralPort; /* Source peripheral port */ - uint32_t dstPeripheralPort; /* Destination peripheral port */ - uint32_t srcStatusRegisterAddress; /* Source status register address */ - uint32_t dstStatusRegisterAddress; /* Destination status register address of type */ - - uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */ - uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */ - uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */ - uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */ - uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor. - 0 = Maximum possible. - */ - - dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */ - dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */ - dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */ - dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */ - dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */ - dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */ - dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */ - dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */ - dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */ - dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */ - dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */ - dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */ - dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */ - dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */ - dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */ -} dmacHw_CONFIG_t; - -/****************************************************************************/ -/** -* @brief Initializes DMA -* -* This function initializes DMA CSP driver -* -* @note -* Must be called before using any DMA channel -*/ -/****************************************************************************/ -void dmacHw_initDma(void); - -/****************************************************************************/ -/** -* @brief Exit function for DMA -* -* This function isolates DMA from the system -* -*/ -/****************************************************************************/ -void dmacHw_exitDma(void); - -/****************************************************************************/ -/** -* @brief Gets a handle to a DMA channel -* -* This function returns a handle, representing a control block of a particular DMA channel -* -* @return -1 - On Failure -* handle - On Success, representing a channel control block -* -* @note -* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */ - ); - -/****************************************************************************/ -/** -* @brief Initializes a DMA channel for use -* -* This function initializes and resets a DMA channel for use -* -* @return -1 - On Failure -* 0 - On Success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Estimates number of descriptor needed to perform certain DMA transfer -* -* -* @return On failure : -1 -* On success : Number of descriptor count -* -* -*/ -/****************************************************************************/ -int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Data length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Initializes descriptor ring -* -* This function will initializes the descriptor ring of a DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* @note -* - "len" parameter should be obtained from "dmacHw_descriptorLen" -* - Descriptor buffer MUST be 32 bit aligned and uncached as it -* is accessed by ARM and DMA -*/ -/****************************************************************************/ -int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */ - uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */ - uint32_t len, /* [ IN ] Size of the pBuf */ - uint32_t num /* [ IN ] Number of descriptor in the ring */ - ); - -/****************************************************************************/ -/** -* @brief Finds amount of memory required to form a descriptor ring -* -* -* @return Number of bytes required to form a descriptor ring -* -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */ - ); - -/****************************************************************************/ -/** -* @brief Configure DMA channel -* -* @return 0 : On success -* -1 : On failure -*/ -/****************************************************************************/ -int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */ - ); - -/****************************************************************************/ -/** -* @brief Set descriptors for known data length -* -* When DMA has to work as a flow controller, this function prepares the -* descriptor chain to transfer data -* -* from: -* - Memory to memory -* - Peripheral to memory -* - Memory to Peripheral -* - Peripheral to Peripheral -* -* @return -1 - On failure -* 0 - On success -* -*/ -/****************************************************************************/ -int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Indicates whether DMA transfer is in progress or completed -* -* @return DMA transfer status -* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing -* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed -* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error -* -*/ -/****************************************************************************/ -dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Set descriptor carrying control information -* -* This function will be used to send specific control information to the device -* using the DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t ctlAddress, /* [ IN ] Address of the device control register */ - uint32_t control /* [ IN ] Device control information */ - ); - -/****************************************************************************/ -/** -* @brief Read data DMA transferred to memory -* -* This function will read data that has been DMAed to memory while transferring from: -* - Memory to memory -* - Peripheral to memory -* -* @return 0 - No more data is available to read -* 1 - More data might be available to read -* -*/ -/****************************************************************************/ -int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void **ppBbuf, /* [ OUT ] Data received */ - size_t *pLlen /* [ OUT ] Length of the data received */ - ); - -/****************************************************************************/ -/** -* @brief Prepares descriptor ring, when source peripheral working as a flow controller -* -* This function will form the descriptor ring by allocating buffers, when source peripheral -* has to work as a flow controller to transfer data from: -* - Peripheral to memory. -* -* @return -1 - On failure -* 0 - On success -* -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t srcAddr, /* [ IN ] Source peripheral address */ - void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */ - int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */ - int num /* [ IN ] Number of descriptor to set */ - ); - -/****************************************************************************/ -/** -* @brief Program channel register to initiate transfer -* -* @return void -* -* -* @note -* - Descriptor buffer MUST ALWAYS be flushed before calling this function -* - This function should also be called from ISR to program the channel with -* pending descriptors -*/ -/****************************************************************************/ -void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Resets descriptor control information -* -* @return void -*/ -/****************************************************************************/ -void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Program channel register to stop transfer -* -* Ensures the channel is not doing any transfer after calling this function -* -* @return void -* -*/ -/****************************************************************************/ -void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Check the existence of pending descriptor -* -* This function confirmes if there is any pending descriptor in the chain -* to program the channel -* -* @return 1 : Channel need to be programmed with pending descriptor -* 0 : No more pending descriptor to programe the channel -* -* @note -* - This function should be called from ISR in case there are pending -* descriptor to program the channel. -* -* Example: -* -* dmac_isr () -* { -* ... -* if (dmacHw_descriptorPending (handle)) -* { -* dmacHw_initiateTransfer (handle); -* } -* } -* -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Deallocates source or destination memory, allocated -* -* This function can be called to deallocate data memory that was DMAed successfully -* -* @return -1 - On failure -* 0 - On success -* -* @note -* This function will be called ONLY, when source OR destination address is pointing -* to dynamic memory -*/ -/****************************************************************************/ -int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */ - ); - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the DMA channel specific interrupt -* -* @return N/A -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Returns the cause of channel specific DMA interrupt -* -* This function returns the cause of interrupt -* -* @return Interrupt status, each bit representing a specific type of interrupt -* of type dmacHw_INTERRUPT_STATUS_e -* @note -* This function should be called under the context of ISR -*/ -/****************************************************************************/ -dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Indentifies a DMA channel causing interrupt -* -* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e -* -* @return NULL : No channel causing DMA interrupt -* ! NULL : Handle to a channel causing DMA interrupt -* @note -* dmacHw_clearInterrupt() must be called with a valid handle after calling this function -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getInterruptSource(void); - -/****************************************************************************/ -/** -* @brief Sets channel specific user data -* -* This function associates user data to a specific DMA channel -* -*/ -/****************************************************************************/ -void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *userData /* [ IN ] User data */ - ); - -/****************************************************************************/ -/** -* @brief Gets channel specific user data -* -* This function returns user data specific to a DMA channel -* -* @return user data -*/ -/****************************************************************************/ -void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Displays channel specific registers and other control parameters -* -* -* @return void -* -* @note -* None -*/ -/****************************************************************************/ -void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ - ); - -/****************************************************************************/ -/** -* @brief Provides DMA controller attributes -* -* -* @return DMA controller attributes -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */ - ); - -#endif /* _DMACHW_H */ diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h deleted file mode 100644 index 56654d23c3d7..000000000000 --- a/arch/arm/mach-bcmring/include/csp/reg.h +++ /dev/null @@ -1,114 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file reg.h -* -* @brief Generic register definitions used in CSP -*/ -/****************************************************************************/ - -#ifndef CSP_REG_H -#define CSP_REG_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include - -/* ---- Public Constants and Types --------------------------------------- */ - -#define __REG32(x) (*((volatile uint32_t *)(x))) -#define __REG16(x) (*((volatile uint16_t *)(x))) -#define __REG8(x) (*((volatile uint8_t *) (x))) - -/* Macros used to define a sequence of reserved registers. The start / end */ -/* are byte offsets in the particular register definition, with the "end" */ -/* being the offset of the next un-reserved register. E.g. if offsets */ -/* 0x10 through to 0x1f are reserved, then this reserved area could be */ -/* specified as follows. */ -/* typedef struct */ -/* { */ -/* uint32_t reg1; offset 0x00 */ -/* uint32_t reg2; offset 0x04 */ -/* uint32_t reg3; offset 0x08 */ -/* uint32_t reg4; offset 0x0c */ -/* REG32_RSVD(0x10, 0x20); */ -/* uint32_t reg5; offset 0x20 */ -/* ... */ -/* } EXAMPLE_REG_t; */ -#define REG8_RSVD(start, end) uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)] -#define REG16_RSVD(start, end) uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)] -#define REG32_RSVD(start, end) uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)] - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */ -/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the */ -/* flags variable to be declared locally. */ -/* e.g. */ -/* statement1; */ -/* { */ -/* REG_LOCAL_IRQ_SAVE; */ -/* */ -/* REG_LOCAL_IRQ_RESTORE; */ -/* } */ -/* statement2; */ -/* */ - -#if defined(__KERNEL__) && !defined(STANDALONE) -#include -#include - -#define REG_LOCAL_IRQ_SAVE HW_DECLARE_SPINLOCK(reg32) \ - unsigned long flags; HW_IRQ_SAVE(reg32, flags) - -#define REG_LOCAL_IRQ_RESTORE HW_IRQ_RESTORE(reg32, flags) - -#else - -#define REG_LOCAL_IRQ_SAVE -#define REG_LOCAL_IRQ_RESTORE - -#endif - -static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value) -{ - REG_LOCAL_IRQ_SAVE; - *reg &= value; - REG_LOCAL_IRQ_RESTORE; -} - -static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value) -{ - REG_LOCAL_IRQ_SAVE; - *reg |= value; - REG_LOCAL_IRQ_RESTORE; -} - -static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask, - uint32_t value) -{ - REG_LOCAL_IRQ_SAVE; - *reg = (*reg & mask) | value; - REG_LOCAL_IRQ_RESTORE; -} - -static inline void reg32_write(volatile uint32_t *reg, uint32_t value) -{ - *reg = value; -} - -#endif /* CSP_REG_H */ diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h deleted file mode 100644 index 2cbb530db8ea..000000000000 --- a/arch/arm/mach-bcmring/include/csp/tmrHw.h +++ /dev/null @@ -1,263 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file tmrHw.h -* -* @brief API definitions for low level Timer driver -* -*/ -/****************************************************************************/ -#ifndef _TMRHW_H -#define _TMRHW_H - -#include - -typedef uint32_t tmrHw_ID_t; /* Timer ID */ -typedef uint32_t tmrHw_COUNT_t; /* Timer count */ -typedef uint32_t tmrHw_INTERVAL_t; /* Timer interval */ -typedef uint32_t tmrHw_RATE_t; /* Timer event (count/interrupt) rate */ - -typedef enum { - tmrHw_INTERRUPT_STATUS_SET, /* Interrupted */ - tmrHw_INTERRUPT_STATUS_UNSET /* No Interrupt */ -} tmrHw_INTERRUPT_STATUS_e; - -typedef enum { - tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */ - tmrHw_CAPABILITY_RESOLUTION /* Timer resolution in bits */ -} tmrHw_CAPABILITY_e; - -/****************************************************************************/ -/** -* @brief Get timer capability -* -* This function returns various capabilities/attributes of a timer -* -* @return Numeric capability -* -*/ -/****************************************************************************/ -uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */ -); - -/****************************************************************************/ -/** -* @brief Configures a periodic timer in terms of timer interrupt rate -* -* This function initializes a periodic timer to generate specific number of -* timer interrupt per second -* -* @return On success: Effective timer frequency -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */ -); - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt after -* certain time interval -* -* This function initializes a periodic timer to generate timer interrupt -* after every time interval in millisecond -* -* @return On success: Effective interval set in mili-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */ -); - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt just once -* after certain time interval -* -* This function initializes a periodic timer to generate a single ticks after -* certain time interval in millisecond -* -* @return On success: Effective interval set in mili-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */ -); - -/****************************************************************************/ -/** -* @brief Configures a timer to run as a free running timer -* -* This function initializes a timer to run as a free running timer -* -* @return Timer resolution (count / sec) -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - uint32_t divider /* [ IN ] Dividing the clock frequency */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Starts a timer -* -* This function starts a preconfigured timer -* -* @return -1 - On Failure -* 0 - On Success -*/ -/****************************************************************************/ -int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Stops a timer -* -* This function stops a running timer -* -* @return -1 - On Failure -* 0 - On Success -*/ -/****************************************************************************/ -int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Gets current timer count -* -* This function returns the current timer value -* -* @return Current downcounting timer value -* -*/ -/****************************************************************************/ -tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Gets timer count rate -* -* This function returns the number of counts per second -* -* @return Count rate -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Enables timer interrupt -* -* This function enables the timer interrupt -* -* @return N/A -* -*/ -/****************************************************************************/ -void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Disables timer interrupt -* -* This function disable the timer interrupt -* -* @return N/A -*/ -/****************************************************************************/ -void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the timer interrupt -* -* @return N/A -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Gets the interrupt status -* -* This function returns timer interrupt status -* -* @return Interrupt status -*/ -/****************************************************************************/ -tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Indentifies a timer causing interrupt -* -* This functions returns a timer causing interrupt -* -* @return 0xFFFFFFFF : No timer causing an interrupt -* ! 0xFFFFFFFF : timer causing an interrupt -* @note -* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function -*/ -/****************************************************************************/ -tmrHw_ID_t tmrHw_getInterruptSource(void); - -/****************************************************************************/ -/** -* @brief Displays specific timer registers -* -* -* @return void -* -*/ -/****************************************************************************/ -void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ -); - -/****************************************************************************/ -/** -* @brief Use a timer to perform a busy wait delay for a number of usecs. -* -* @return N/A -*/ -/****************************************************************************/ -void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - unsigned long usecs /* [ IN ] usec to delay */ -) __attribute__ ((section(".aramtext"))); - -#endif /* _TMRHW_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h deleted file mode 100644 index 30fa2d540630..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/cap.h +++ /dev/null @@ -1,63 +0,0 @@ -/***************************************************************************** -* Copyright 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CAP_H -#define CAP_H - -/* ---- Include Files ---------------------------------------------------- */ -/* ---- Public Constants and Types --------------------------------------- */ -typedef enum { - CAP_NOT_PRESENT = 0, - CAP_PRESENT -} CAP_RC_T; - -typedef enum { - CAP_VPM, - CAP_ETH_PHY, - CAP_ETH_GMII, - CAP_ETH_SGMII, - CAP_USB, - CAP_TSC, - CAP_EHSS, - CAP_SDIO, - CAP_UARTB, - CAP_KEYPAD, - CAP_CLCD, - CAP_GE, - CAP_LEDM, - CAP_BBL, - CAP_VDEC, - CAP_PIF, - CAP_APM, - CAP_SPU, - CAP_PKA, - CAP_RNG, -} CAP_CAPABILITY_T; - -typedef enum { - CAP_LCD_WVGA = 0, - CAP_LCD_VGA = 0x1, - CAP_LCD_WQVGA = 0x2, - CAP_LCD_QVGA = 0x3 -} CAP_LCD_RES_T; - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index); -static inline uint32_t cap_getMaxArmSpeedHz(void); -static inline uint32_t cap_getMaxVpmSpeedHz(void); -static inline CAP_LCD_RES_T cap_getMaxLcdRes(void); - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h deleted file mode 100644 index 933ce68ed90b..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h +++ /dev/null @@ -1,409 +0,0 @@ -/***************************************************************************** -* Copyright 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CAP_INLINE_H -#define CAP_INLINE_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include - -/* ---- Public Constants and Types --------------------------------------- */ -#define CAP_CONFIG0_VPM_DIS 0x00000001 -#define CAP_CONFIG0_ETH_PHY0_DIS 0x00000002 -#define CAP_CONFIG0_ETH_PHY1_DIS 0x00000004 -#define CAP_CONFIG0_ETH_GMII0_DIS 0x00000008 -#define CAP_CONFIG0_ETH_GMII1_DIS 0x00000010 -#define CAP_CONFIG0_ETH_SGMII0_DIS 0x00000020 -#define CAP_CONFIG0_ETH_SGMII1_DIS 0x00000040 -#define CAP_CONFIG0_USB0_DIS 0x00000080 -#define CAP_CONFIG0_USB1_DIS 0x00000100 -#define CAP_CONFIG0_TSC_DIS 0x00000200 -#define CAP_CONFIG0_EHSS0_DIS 0x00000400 -#define CAP_CONFIG0_EHSS1_DIS 0x00000800 -#define CAP_CONFIG0_SDIO0_DIS 0x00001000 -#define CAP_CONFIG0_SDIO1_DIS 0x00002000 -#define CAP_CONFIG0_UARTB_DIS 0x00004000 -#define CAP_CONFIG0_KEYPAD_DIS 0x00008000 -#define CAP_CONFIG0_CLCD_DIS 0x00010000 -#define CAP_CONFIG0_GE_DIS 0x00020000 -#define CAP_CONFIG0_LEDM_DIS 0x00040000 -#define CAP_CONFIG0_BBL_DIS 0x00080000 -#define CAP_CONFIG0_VDEC_DIS 0x00100000 -#define CAP_CONFIG0_PIF_DIS 0x00200000 -#define CAP_CONFIG0_RESERVED1_DIS 0x00400000 -#define CAP_CONFIG0_RESERVED2_DIS 0x00800000 - -#define CAP_CONFIG1_APMA_DIS 0x00000001 -#define CAP_CONFIG1_APMB_DIS 0x00000002 -#define CAP_CONFIG1_APMC_DIS 0x00000004 -#define CAP_CONFIG1_CLCD_RES_MASK 0x00000600 -#define CAP_CONFIG1_CLCD_RES_SHIFT 9 -#define CAP_CONFIG1_CLCD_RES_WVGA (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT) -#define CAP_CONFIG1_CLCD_RES_VGA (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT) -#define CAP_CONFIG1_CLCD_RES_WQVGA (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT) -#define CAP_CONFIG1_CLCD_RES_QVGA (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT) - -#define CAP_CONFIG2_SPU_DIS 0x00000010 -#define CAP_CONFIG2_PKA_DIS 0x00000020 -#define CAP_CONFIG2_RNG_DIS 0x00000080 - -#if (CFG_GLOBAL_CHIP == BCM11107) -#define capConfig0 0 -#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA -#define capConfig2 0 -#define CAP_APM_MAX_NUM_CHANS 3 -#elif (CFG_GLOBAL_CHIP == FPGA11107) -#define capConfig0 0 -#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA -#define capConfig2 0 -#define CAP_APM_MAX_NUM_CHANS 3 -#elif (CFG_GLOBAL_CHIP == BCM11109) -#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS) -#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA) -#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS) -#define CAP_APM_MAX_NUM_CHANS 2 -#elif (CFG_GLOBAL_CHIP == BCM11170) -#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS) -#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA) -#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS) -#define CAP_APM_MAX_NUM_CHANS 2 -#elif (CFG_GLOBAL_CHIP == BCM11110) -#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS) -#define capConfig1 CAP_CONFIG1_APMC_DIS -#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS) -#define CAP_APM_MAX_NUM_CHANS 2 -#elif (CFG_GLOBAL_CHIP == BCM11211) -#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS) -#define capConfig1 CAP_CONFIG1_APMC_DIS -#define capConfig2 0 -#define CAP_APM_MAX_NUM_CHANS 2 -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif - -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107)) -#define CAP_HW_CFG_ARM_CLK_HZ 500000000 -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) -#define CAP_HW_CFG_ARM_CLK_HZ 300000000 -#elif (CFG_GLOBAL_CHIP == BCM11211) -#define CAP_HW_CFG_ARM_CLK_HZ 666666666 -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif - -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107)) -#define CAP_HW_CFG_VPM_CLK_HZ 333333333 -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) -#define CAP_HW_CFG_VPM_CLK_HZ 200000000 -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -/**************************************************************************** -* cap_isPresent - -* -* PURPOSE: -* Determines if the chip has a certain capability present -* -* PARAMETERS: -* capability - type of capability to determine if present -* -* RETURNS: -* CAP_PRESENT or CAP_NOT_PRESENT -****************************************************************************/ -static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index) -{ - CAP_RC_T returnVal = CAP_NOT_PRESENT; - - switch (capability) { - case CAP_VPM: - { - if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_ETH_PHY: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_ETH_GMII: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_ETH_SGMII: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_USB: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_TSC: - { - if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_EHSS: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_SDIO: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_UARTB: - { - if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_KEYPAD: - { - if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_CLCD: - { - if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_GE: - { - if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_LEDM: - { - if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_BBL: - { - if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_VDEC: - { - if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_PIF: - { - if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_APM: - { - if ((index == 0) - && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 2) - && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_SPU: - { - if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_PKA: - { - if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_RNG: - { - if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - default: - { - } - break; - } - return returnVal; -} - -/**************************************************************************** -* cap_getMaxArmSpeedHz - -* -* PURPOSE: -* Determines the maximum speed of the ARM CPU -* -* PARAMETERS: -* none -* -* RETURNS: -* clock speed in Hz that the ARM processor is able to run at -****************************************************************************/ -static inline uint32_t cap_getMaxArmSpeedHz(void) -{ -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107)) - return 500000000; -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) - return 300000000; -#elif (CFG_GLOBAL_CHIP == BCM11211) - return 666666666; -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif -} - -/**************************************************************************** -* cap_getMaxVpmSpeedHz - -* -* PURPOSE: -* Determines the maximum speed of the VPM -* -* PARAMETERS: -* none -* -* RETURNS: -* clock speed in Hz that the VPM is able to run at -****************************************************************************/ -static inline uint32_t cap_getMaxVpmSpeedHz(void) -{ -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107)) - return 333333333; -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) - return 200000000; -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif -} - -/**************************************************************************** -* cap_getMaxLcdRes - -* -* PURPOSE: -* Determines the maximum LCD resolution capabilities -* -* PARAMETERS: -* none -* -* RETURNS: -* CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA -* -****************************************************************************/ -static inline CAP_LCD_RES_T cap_getMaxLcdRes(void) -{ - return (CAP_LCD_RES_T) - ((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >> - CAP_CONFIG1_CLCD_RES_SHIFT); -} - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h deleted file mode 100644 index 161973385faf..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ /dev/null @@ -1,1123 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CHIPC_DEF_H -#define CHIPC_DEF_H - -/* ---- Include Files ----------------------------------------------------- */ - -#include -#include -#include -#include - -/* ---- Public Constants and Types ---------------------------------------- */ - -/* Set 1 to configure DDR/VPM phase alignment by HW */ -#define chipcHw_DDR_HW_PHASE_ALIGN 0 -#define chipcHw_VPM_HW_PHASE_ALIGN 0 - -typedef uint32_t chipcHw_freq; - -/* Configurable miscellaneous clocks */ -typedef enum { - chipcHw_CLOCK_DDR, /* DDR PHY Clock */ - chipcHw_CLOCK_ARM, /* ARM Clock */ - chipcHw_CLOCK_ESW, /* Ethernet Switch Clock */ - chipcHw_CLOCK_VPM, /* VPM Clock */ - chipcHw_CLOCK_ESW125, /* Ethernet MII Clock */ - chipcHw_CLOCK_UART, /* UART Clock */ - chipcHw_CLOCK_SDIO0, /* SDIO 0 Clock */ - chipcHw_CLOCK_SDIO1, /* SDIO 1 Clock */ - chipcHw_CLOCK_SPI, /* SPI Clock */ - chipcHw_CLOCK_ETM, /* ARM ETM Clock */ - - chipcHw_CLOCK_BUS, /* BUS Clock */ - chipcHw_CLOCK_OTP, /* OTP Clock */ - chipcHw_CLOCK_I2C, /* I2C Host Clock */ - chipcHw_CLOCK_I2S0, /* I2S 0 Host Clock */ - chipcHw_CLOCK_RTBUS, /* DDR PHY Configuration Clock */ - chipcHw_CLOCK_APM100, /* APM100 Clock */ - chipcHw_CLOCK_TSC, /* Touch screen Clock */ - chipcHw_CLOCK_LED, /* LED Clock */ - - chipcHw_CLOCK_USB, /* USB Clock */ - chipcHw_CLOCK_LCD, /* LCD CLock */ - chipcHw_CLOCK_APM, /* APM Clock */ - - chipcHw_CLOCK_I2S1, /* I2S 1 Host Clock */ -} chipcHw_CLOCK_e; - -/* System booting strap options */ -typedef enum { - chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART, - chipcHw_BOOT_DEVICE_SERIAL_FLASH = - chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH, - chipcHw_BOOT_DEVICE_NOR_FLASH_16 = - chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16, - chipcHw_BOOT_DEVICE_NAND_FLASH_8 = - chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8, - chipcHw_BOOT_DEVICE_NAND_FLASH_16 = - chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 -} chipcHw_BOOT_DEVICE_e; - -/* System booting modes */ -typedef enum { - chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL, - chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW, - chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT, - chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET -} chipcHw_BOOT_MODE_e; - -/* NAND Flash page size strap options */ -typedef enum { - chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512, - chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048, - chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096, - chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT -} chipcHw_NAND_PAGESIZE_e; - -/* GPIO Pin function */ -typedef enum { - chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD, - chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH, - chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI, - chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART, - chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP, - chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS, - chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0, - chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1, - chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM, - chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S, - chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM, - chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG, - chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC, - chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO -} chipcHw_GPIO_FUNCTION_e; - -/* PIN Output slew rate */ -typedef enum { - chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH, - chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL -} chipcHw_PIN_SLEW_RATE_e; - -/* PIN Current drive strength */ -typedef enum { - chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA, - chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA, - chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA, - chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA, - chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA, - chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA -} chipcHw_PIN_CURRENT_STRENGTH_e; - -/* PIN Pull up register settings */ -typedef enum { - chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE, - chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP, - chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN -} chipcHw_PIN_PULL_e; - -/* PIN input type settings */ -typedef enum { - chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS, - chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST -} chipcHw_PIN_INPUTTYPE_e; - -/* Allow/Disalow the support of spread spectrum */ -typedef enum { - chipcHw_SPREAD_SPECTRUM_DISALLOW, /* Spread spectrum support is not allowed */ - chipcHw_SPREAD_SPECTRUM_ALLOW /* Spread spectrum support is allowed */ -} chipcHw_SPREAD_SPECTRUM_e; - -typedef struct { - chipcHw_SPREAD_SPECTRUM_e ssSupport; /* Allow/Disalow to support spread spectrum. - If supported, call chipcHw_enableSpreadSpectrum () - to activate the spread spectrum with desired spread. */ - uint32_t pllVcoFreqHz; /* PLL VCO frequency in Hz */ - uint32_t pll2VcoFreqHz; /* PLL2 VCO frequency in Hz */ - uint32_t busClockFreqHz; /* Bus clock frequency in Hz */ - uint32_t armBusRatio; /* ARM clock : Bus clock */ - uint32_t vpmBusRatio; /* VPM clock : Bus clock */ - uint32_t ddrBusRatio; /* DDR clock : Bus clock */ -} chipcHw_INIT_PARAM_t; - -/* CHIP revision number */ -typedef enum { - chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0, - chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0 -} chipcHw_REV_NUMBER_e; - -typedef enum { - chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE, - chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST, - chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM, - chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW -} chipcHw_VPM_HW_PHASE_INTR_e; - -typedef enum { - chipcHw_DDR_HW_PHASE_MARGIN_STRICT, /* Strict margin for DDR phase align condition */ - chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for DDR phase align condition */ - chipcHw_DDR_HW_PHASE_MARGIN_WIDE /* Wider margin for DDR phase align condition */ -} chipcHw_DDR_HW_PHASE_MARGIN_e; - -typedef enum { - chipcHw_VPM_HW_PHASE_MARGIN_STRICT, /* Strict margin for VPM phase align condition */ - chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for VPM phase align condition */ - chipcHw_VPM_HW_PHASE_MARGIN_WIDE /* Wider margin for VPM phase align condition */ -} chipcHw_VPM_HW_PHASE_MARGIN_e; - -#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */ - -/* Programmable pin defines */ -#define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF) - /* GPIO pin 0 - 60 */ -#define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */ -#define chipcHw_PIN_NVI_A (chipcHw_GPIO_COUNT + 1) /* NVI Interface */ -#define chipcHw_PIN_NVI_D (chipcHw_GPIO_COUNT + 2) /* NVI Interface */ -#define chipcHw_PIN_NVI_OEB (chipcHw_GPIO_COUNT + 3) /* NVI Interface */ -#define chipcHw_PIN_NVI_WEB (chipcHw_GPIO_COUNT + 4) /* NVI Interface */ -#define chipcHw_PIN_NVI_CS (chipcHw_GPIO_COUNT + 5) /* NVI Interface */ -#define chipcHw_PIN_NVI_NAND_CSB (chipcHw_GPIO_COUNT + 6) /* NVI Interface */ -#define chipcHw_PIN_NVI_FLASHWP (chipcHw_GPIO_COUNT + 7) /* NVI Interface */ -#define chipcHw_PIN_NVI_NAND_RDYB (chipcHw_GPIO_COUNT + 8) /* NVI Interface */ -#define chipcHw_PIN_CL_DATA_0_17 (chipcHw_GPIO_COUNT + 9) /* LCD Data 0 - 17 */ -#define chipcHw_PIN_CL_DATA_18_20 (chipcHw_GPIO_COUNT + 10) /* LCD Data 18 - 20 */ -#define chipcHw_PIN_CL_DATA_21_23 (chipcHw_GPIO_COUNT + 11) /* LCD Data 21 - 23 */ -#define chipcHw_PIN_CL_POWER (chipcHw_GPIO_COUNT + 12) /* LCD Power */ -#define chipcHw_PIN_CL_ACK (chipcHw_GPIO_COUNT + 13) /* LCD Ack */ -#define chipcHw_PIN_CL_FP (chipcHw_GPIO_COUNT + 14) /* LCD FP */ -#define chipcHw_PIN_CL_LP (chipcHw_GPIO_COUNT + 15) /* LCD LP */ -#define chipcHw_PIN_UARTRXD (chipcHw_GPIO_COUNT + 16) /* UART Receive */ - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -/****************************************************************************/ -/** -* @brief Initializes the clock module -* -*/ -/****************************************************************************/ -void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Enables the PLL1 -* -* This function enables the PLL1 -* -*/ -/****************************************************************************/ -void chipcHw_pll1Enable(uint32_t vcoFreqHz, /* [ IN ] VCO frequency in Hz */ - chipcHw_SPREAD_SPECTRUM_e ssSupport /* [ IN ] SS status */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Enables the PLL2 -* -* This function enables the PLL2 -* -*/ -/****************************************************************************/ -void chipcHw_pll2Enable(uint32_t vcoFreqHz /* [ IN ] VCO frequency in Hz */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Disable the PLL1 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll1Disable(void); - -/****************************************************************************/ -/** -* @brief Disable the PLL2 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll2Disable(void); - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in KHz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in Hz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */ - uint32_t freq /* [ IN ] Clock frequency in Hz */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Set VPM clock in sync with BUS clock -* -* This function does the phase adjustment between VPM and BUS clock -* -* @return >= 0 : On success ( # of adjustment required ) -* -1 : On failure -*/ -/****************************************************************************/ -int chipcHw_vpmPhaseAlign(void); - -/****************************************************************************/ -/** -* @brief Enables core a clock of a certain device -* -* This function enables a core clock -* -* @return void -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Disabled a core clock of a certain device -* -* This function disables a core clock -* -* @return void -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Enables bypass clock of a certain device -* -* This function enables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Disabled bypass clock of a certain device -* -* This function disables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Get Numeric Chip ID -* -* This function returns Chip ID that includes the revison number -* -* @return Complete numeric Chip ID -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipId(void); - -/****************************************************************************/ -/** -* @brief Get Chip Product ID -* -* This function returns Chip Product ID -* -* @return Chip Product ID -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipProductId(void); - -/****************************************************************************/ -/** -* @brief Get revision number -* -* This function returns revision number of the chip -* -* @return Revision number -*/ -/****************************************************************************/ -static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void); - -/****************************************************************************/ -/** -* @brief Enables bus interface clock -* -* Enables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Disables bus interface clock -* -* Disables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Enables various audio channels -* -* Enables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Disables various audio channels -* -* Disables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Soft resets devices -* -* Soft resets various devices -* -* @return void -* -* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines -*/ -/****************************************************************************/ -static inline void chipcHw_softReset(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */ - ); - -static inline void chipcHw_softResetDisable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */ - ); - -static inline void chipcHw_softResetEnable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Configures misc CHIP functionality -* -* Configures CHIP functionality -* -* @return void -* -* @note use chipcHw_REG_MISC_CTRL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_miscControl(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */ - ); - -static inline void chipcHw_miscControlDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */ - ); - -static inline void chipcHw_miscControlEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Set OTP options -* -* Set OTP options -* -* @return void -* -* @note use chipcHw_REG_OTP_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setOTPOption(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Get sticky bits -* -* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getStickyBits(void); - -/****************************************************************************/ -/** -* @brief Set sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Clear sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_clearStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Get software override strap options -* -* Retrieves software override strap options -* -* @return Software override strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getSoftStraps(void); - -/****************************************************************************/ -/** -* @brief Set software override strap options -* -* set software override strap options -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_setSoftStraps(uint32_t strapOptions); - -/****************************************************************************/ -/** -* @brief Get pin strap options -* -* Retrieves pin strap options -* -* @return Pin strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getPinStraps(void); - -/****************************************************************************/ -/** -* @brief Get valid pin strap options -* -* Retrieves valid pin strap options -* -* @return valid Pin strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getValidStraps(void); - -/****************************************************************************/ -/** -* @brief Initialize valid pin strap options -* -* Retrieves valid pin strap options by copying HW strap options to soft register -* (if chipcHw_STRAPS_SOFT_OVERRIDE not set) -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_initValidStraps(void); - -/****************************************************************************/ -/** -* @brief Get status (enabled/disabled) of bus interface clock -* -* This function returns the status of devices' bus interface clock -* -* @return Bus interface clock -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getBusInterfaceClockStatus(void); - -/****************************************************************************/ -/** -* @brief Get boot device -* -* This function returns the device type used in booting the system -* -* @return Boot device of type chipcHw_BOOT_DEVICE_e -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void); - -/****************************************************************************/ -/** -* @brief Get boot mode -* -* This function returns the way the system was booted -* -* @return Boot mode of type chipcHw_BOOT_MODE_e -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void); - -/****************************************************************************/ -/** -* @brief Get NAND flash page size -* -* This function returns the NAND device page size -* -* @return Boot NAND device page size -* -*/ -/****************************************************************************/ -static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void); - -/****************************************************************************/ -/** -* @brief Get NAND flash address cycle configuration -* -* This function returns the NAND flash address cycle configuration -* -* @return 0 = Do not extra address cycle, 1 = Add extra cycle -* -*/ -/****************************************************************************/ -static inline int chipcHw_getNandExtraCycle(void); - -/****************************************************************************/ -/** -* @brief Activates PIF interface -* -* This function activates PIF interface by taking control of LCD pins -* -* @note -* When activated, LCD pins will be defined as follows for PIF operation -* -* CLD[17:0] = pif_data[17:0] -* CLD[23:18] = pif_address[5:0] -* CLPOWER = pif_wr_str -* CLCP = pif_rd_str -* CLAC = pif_hat1 -* CLFP = pif_hrdy1 -* CLLP = pif_hat2 -* GPIO[42] = pif_hrdy2 -* -* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_activatePifInterface(void); - -/****************************************************************************/ -/** -* @brief Activates LCD interface -* -* This function activates LCD interface -* -* @note -* When activated, LCD pins will be defined as follows -* -* CLD[17:0] = LCD data -* CLD[23:18] = LCD data -* CLPOWER = LCD power -* CLCP = -* CLAC = LCD ack -* CLFP = -* CLLP = -*/ -/****************************************************************************/ -static inline void chipcHw_activateLcdInterface(void); - -/****************************************************************************/ -/** -* @brief Deactivates PIF/LCD interface -* -* This function deactivates PIF/LCD interface -* -* @note -* When deactivated LCD pins will be in rti-stated -* -*/ -/****************************************************************************/ -static inline void chipcHw_deactivatePifLcdInterface(void); - -/****************************************************************************/ -/** -* @brief Get to know the configuration of GPIO pin -* -*/ -/****************************************************************************/ -static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin /* GPIO Pin number */ - ); - -/****************************************************************************/ -/** -* @brief Configure GPIO pin function -* -*/ -/****************************************************************************/ -static inline void chipcHw_setGpioPinFunction(int pin, /* GPIO Pin number */ - chipcHw_GPIO_FUNCTION_e func /* Configuration function */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin slew rate -* -* This function sets the slew of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinSlewRate(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_SLEW_RATE_e slewRate /* Pin slew rate */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin output drive current -* -* This function sets output drive current of individual pin -* -* Note: Avoid the use of the word 'current' since linux headers define this -* to be the current task. -*/ -/****************************************************************************/ -static inline void chipcHw_setPinOutputCurrent(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_CURRENT_STRENGTH_e curr /* Pin current rating */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin pullup register -* -* This function sets pullup register of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinPullup(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_PULL_e pullup /* Pullup register settings */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin input type -* -* This function sets input type of individual Pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinInputType(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_INPUTTYPE_e inputType /* Pin input type */ - ); - -/****************************************************************************/ -/** -* @brief Retrieves a string representation of the mux setting for a pin. -* -* @return Pointer to a character string. -*/ -/****************************************************************************/ - -const char *chipcHw_getGpioPinFunctionStr(int pin); - -/****************************************************************************/ -/** @brief issue warmReset - */ -/****************************************************************************/ -void chipcHw_reset(uint32_t mask); - -/****************************************************************************/ -/** @brief clock reconfigure - */ -/****************************************************************************/ -void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio, - uint32_t ddrRatio); - -/****************************************************************************/ -/** -* @brief Enable Spread Spectrum -* -* @note chipcHw_Init() must be called earlier -*/ -/****************************************************************************/ -static inline void chipcHw_enableSpreadSpectrum(void); - -/****************************************************************************/ -/** -* @brief Disable Spread Spectrum -* -*/ -/****************************************************************************/ -static inline void chipcHw_disableSpreadSpectrum(void); - -/****************************************************************************/ -/** @brief Checks if software strap is enabled - * - * @return 1 : When enable - * 0 : When disable - */ -/****************************************************************************/ -static inline int chipcHw_isSoftwareStrapsEnable(void); - -/****************************************************************************/ -/** @brief Enable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsEnable(void); - -/****************************************************************************/ -/** @brief Disable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsDisable(void); - -/****************************************************************************/ -/** @brief PLL test enable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestEnable(void); - -/****************************************************************************/ -/** @brief PLL2 test enable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestEnable(void); - -/****************************************************************************/ -/** @brief PLL test disable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestDisable(void); - -/****************************************************************************/ -/** @brief PLL2 test disable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestDisable(void); - -/****************************************************************************/ -/** @brief Get PLL test status - */ -/****************************************************************************/ -static inline int chipcHw_isPllTestEnable(void); - -/****************************************************************************/ -/** @brief Get PLL2 test status - */ -/****************************************************************************/ -static inline int chipcHw_isPll2TestEnable(void); - -/****************************************************************************/ -/** @brief PLL test select - */ -/****************************************************************************/ -static inline void chipcHw_pllTestSelect(uint32_t val); - -/****************************************************************************/ -/** @brief PLL2 test select - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestSelect(uint32_t val); - -/****************************************************************************/ -/** @brief Get PLL test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPllTestSelected(void); - -/****************************************************************************/ -/** @brief Get PLL2 test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPll2TestSelected(void); - -/****************************************************************************/ -/** -* @brief Enables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptEnable(void); - -/****************************************************************************/ -/** -* @brief Disables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptDisable(void); - -/****************************************************************************/ -/** -* @brief Set VPM SW phase alignment interrupt mode -* -* This function sets VPM phase alignment interrupt -* -*/ -/****************************************************************************/ -static inline void -chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode); - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Set DDR phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin /* Margin alinging DDR phase */ - ); - -/****************************************************************************/ -/** -* @brief Set VPM phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin /* Margin alinging VPM phase */ - ); - -/****************************************************************************/ -/** -* @brief Checks DDR phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isDdrHwPhaseAligned(void); - -/****************************************************************************/ -/** -* @brief Checks VPM phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isVpmHwPhaseAligned(void); - -/****************************************************************************/ -/** -* @brief Get DDR phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void); - -/****************************************************************************/ -/** -* @brief Get VPM phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void); - -/****************************************************************************/ -/** -* @brief Get DDR phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrPhaseControl(void); - -/****************************************************************************/ -/** -* @brief Get VPM phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmPhaseControl(void); - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a DDR phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */ - ); - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a VPM phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */ - ); - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void); - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void); - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void); - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void); - -/****************************************************************************/ -/** -* @brief Clear DDR phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void); - -/****************************************************************************/ -/** -* @brief Clear VPM phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void); - -/* ---- Private Constants and Types -------------------------------------- */ - -#endif /* CHIPC_DEF_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h deleted file mode 100644 index 03238c299001..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ /dev/null @@ -1,1673 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CHIPC_INLINE_H -#define CHIPC_INLINE_H - -/* ---- Include Files ----------------------------------------------------- */ - -#include -#include -#include -#include - -/* ---- Private Constants and Types --------------------------------------- */ -typedef enum { - chipcHw_OPTYPE_BYPASS, /* Bypass operation */ - chipcHw_OPTYPE_OUTPUT /* Output operation */ -} chipcHw_OPTYPE_e; - -/* ---- Public Constants and Types ---------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------- */ -/* ---- Public Function Prototypes ---------------------------------------- */ -/* ---- Private Function Prototypes --------------------------------------- */ -static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, - chipcHw_OPTYPE_e type, int mode); - -/****************************************************************************/ -/** -* @brief Get Numeric Chip ID -* -* This function returns Chip ID that includes the revison number -* -* @return Complete numeric Chip ID -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipId(void) -{ - return pChipcHw->ChipId; -} - -/****************************************************************************/ -/** -* @brief Enable Spread Spectrum -* -* @note chipcHw_Init() must be called earlier -*/ -/****************************************************************************/ -static inline void chipcHw_enableSpreadSpectrum(void) -{ - if ((pChipcHw-> - PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - ddrcReg_PHY_ADDR_CTL_REGP->ssCfg = - (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | - (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK << - ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT); - ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |= - ddrcReg_PHY_ADDR_SS_CTRL_ENABLE; - } -} - -/****************************************************************************/ -/** -* @brief Disable Spread Spectrum -* -*/ -/****************************************************************************/ -static inline void chipcHw_disableSpreadSpectrum(void) -{ - ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE; -} - -/****************************************************************************/ -/** -* @brief Get Chip Product ID -* -* This function returns Chip Product ID -* -* @return Chip Product ID -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipProductId(void) -{ - return (pChipcHw-> - ChipId & chipcHw_REG_CHIPID_BASE_MASK) >> - chipcHw_REG_CHIPID_BASE_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get revision number -* -* This function returns revision number of the chip -* -* @return Revision number -*/ -/****************************************************************************/ -static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void) -{ - return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK; -} - -/****************************************************************************/ -/** -* @brief Enables bus interface clock -* -* Enables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX for mask -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockEnable(uint32_t mask) -{ - reg32_modify_or(&pChipcHw->BusIntfClock, mask); -} - -/****************************************************************************/ -/** -* @brief Disables bus interface clock -* -* Disables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockDisable(uint32_t mask) -{ - reg32_modify_and(&pChipcHw->BusIntfClock, ~mask); -} - -/****************************************************************************/ -/** -* @brief Get status (enabled/disabled) of bus interface clock -* -* This function returns the status of devices' bus interface clock -* -* @return Bus interface clock -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getBusInterfaceClockStatus(void) -{ - return pChipcHw->BusIntfClock; -} - -/****************************************************************************/ -/** -* @brief Enables various audio channels -* -* Enables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelEnable(uint32_t mask) -{ - reg32_modify_or(&pChipcHw->AudioEnable, mask); -} - -/****************************************************************************/ -/** -* @brief Disables various audio channels -* -* Disables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelDisable(uint32_t mask) -{ - reg32_modify_and(&pChipcHw->AudioEnable, ~mask); -} - -/****************************************************************************/ -/** -* @brief Soft resets devices -* -* Soft resets various devices -* -* @return void -* -* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines -*/ -/****************************************************************************/ -static inline void chipcHw_softReset(uint64_t mask) -{ - chipcHw_softResetEnable(mask); - chipcHw_softResetDisable(mask); -} - -static inline void chipcHw_softResetDisable(uint64_t mask) -{ - uint32_t ctrl1 = (uint32_t) mask; - uint32_t ctrl2 = (uint32_t) (mask >> 32); - - /* Deassert module soft reset */ - REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 ^= ctrl1; - pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); - REG_LOCAL_IRQ_RESTORE; -} - -static inline void chipcHw_softResetEnable(uint64_t mask) -{ - uint32_t ctrl1 = (uint32_t) mask; - uint32_t ctrl2 = (uint32_t) (mask >> 32); - uint32_t unhold = 0; - - REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 |= ctrl1; - /* Mask out unhold request bits */ - pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); - - /* Process unhold requests */ - if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) { - unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD; - } - - if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) { - unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD; - } - - if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) { - unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD; - } - - if (unhold) { - /* Make sure unhold request is effective */ - pChipcHw->SoftReset1 &= ~unhold; - } - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Configures misc CHIP functionality -* -* Configures CHIP functionality -* -* @return void -* -* @note use chipcHw_REG_MISC_CTRL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_miscControl(uint32_t mask) -{ - reg32_write(&pChipcHw->MiscCtrl, mask); -} - -static inline void chipcHw_miscControlDisable(uint32_t mask) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, ~mask); -} - -static inline void chipcHw_miscControlEnable(uint32_t mask) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, mask); -} - -/****************************************************************************/ -/** -* @brief Set OTP options -* -* Set OTP options -* -* @return void -* -* @note use chipcHw_REG_OTP_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setOTPOption(uint64_t mask) -{ - uint32_t ctrl1 = (uint32_t) mask; - uint32_t ctrl2 = (uint32_t) (mask >> 32); - - reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1); - reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2); -} - -/****************************************************************************/ -/** -* @brief Get sticky bits -* -* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getStickyBits(void) -{ - return pChipcHw->Sticky; -} - -/****************************************************************************/ -/** -* @brief Set sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setStickyBits(uint32_t mask) -{ - uint32_t bits = 0; - - REG_LOCAL_IRQ_SAVE; - if (mask & chipcHw_REG_STICKY_POR_BROM) { - bits |= chipcHw_REG_STICKY_POR_BROM; - } else { - uint32_t sticky; - sticky = pChipcHw->Sticky; - - if ((mask & chipcHw_REG_STICKY_BOOT_DONE) - && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) { - bits |= chipcHw_REG_STICKY_BOOT_DONE; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_1) - && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_1; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_2) - && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_2; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_3) - && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_3; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_4) - && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_4; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_5) - && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_5; - } - } - pChipcHw->Sticky = bits; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Clear sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_clearStickyBits(uint32_t mask) -{ - uint32_t bits = 0; - - REG_LOCAL_IRQ_SAVE; - if (mask & - (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 | - chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 | - chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) { - uint32_t sticky = pChipcHw->Sticky; - - if ((mask & chipcHw_REG_STICKY_BOOT_DONE) - && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) { - bits = chipcHw_REG_STICKY_BOOT_DONE; - mask &= ~chipcHw_REG_STICKY_BOOT_DONE; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_1) - && (sticky & chipcHw_REG_STICKY_GENERAL_1)) { - bits |= chipcHw_REG_STICKY_GENERAL_1; - mask &= ~chipcHw_REG_STICKY_GENERAL_1; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_2) - && (sticky & chipcHw_REG_STICKY_GENERAL_2)) { - bits |= chipcHw_REG_STICKY_GENERAL_2; - mask &= ~chipcHw_REG_STICKY_GENERAL_2; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_3) - && (sticky & chipcHw_REG_STICKY_GENERAL_3)) { - bits |= chipcHw_REG_STICKY_GENERAL_3; - mask &= ~chipcHw_REG_STICKY_GENERAL_3; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_4) - && (sticky & chipcHw_REG_STICKY_GENERAL_4)) { - bits |= chipcHw_REG_STICKY_GENERAL_4; - mask &= ~chipcHw_REG_STICKY_GENERAL_4; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_5) - && (sticky & chipcHw_REG_STICKY_GENERAL_5)) { - bits |= chipcHw_REG_STICKY_GENERAL_5; - mask &= ~chipcHw_REG_STICKY_GENERAL_5; - } - } - pChipcHw->Sticky = bits | mask; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Get software strap value -* -* Retrieves software strap value -* -* @return Software strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getSoftStraps(void) -{ - return pChipcHw->SoftStraps; -} - -/****************************************************************************/ -/** -* @brief Set software override strap options -* -* set software override strap options -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_setSoftStraps(uint32_t strapOptions) -{ - reg32_write(&pChipcHw->SoftStraps, strapOptions); -} - -/****************************************************************************/ -/** -* @brief Get Pin Strap Options -* -* This function returns the raw boot strap options -* -* @return strap options -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getPinStraps(void) -{ - return pChipcHw->PinStraps; -} - -/****************************************************************************/ -/** -* @brief Get Valid Strap Options -* -* This function returns the valid raw boot strap options -* -* @return strap options -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getValidStraps(void) -{ - uint32_t softStraps; - - /* - ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps - ** which copies HW straps to soft straps if there is no override - */ - softStraps = chipcHw_getSoftStraps(); - - return softStraps; -} - -/****************************************************************************/ -/** -* @brief Initialize valid pin strap options -* -* Retrieves valid pin strap options by copying HW strap options to soft register -* (if chipcHw_STRAPS_SOFT_OVERRIDE not set) -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_initValidStraps(void) -{ - uint32_t softStraps; - - REG_LOCAL_IRQ_SAVE; - softStraps = chipcHw_getSoftStraps(); - - if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) { - /* Copy HW straps to software straps */ - chipcHw_setSoftStraps(chipcHw_getPinStraps()); - } - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Get boot device -* -* This function returns the device type used in booting the system -* -* @return Boot device of type chipcHw_BOOT_DEVICE -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void) -{ - return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK; -} - -/****************************************************************************/ -/** -* @brief Get boot mode -* -* This function returns the way the system was booted -* -* @return Boot mode of type chipcHw_BOOT_MODE -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void) -{ - return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK; -} - -/****************************************************************************/ -/** -* @brief Get NAND flash page size -* -* This function returns the NAND device page size -* -* @return Boot NAND device page size -* -*/ -/****************************************************************************/ -static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void) -{ - return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK; -} - -/****************************************************************************/ -/** -* @brief Get NAND flash address cycle configuration -* -* This function returns the NAND flash address cycle configuration -* -* @return 0 = Do not extra address cycle, 1 = Add extra cycle -* -*/ -/****************************************************************************/ -static inline int chipcHw_getNandExtraCycle(void) -{ - if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) { - return 1; - } else { - return 0; - } -} - -/****************************************************************************/ -/** -* @brief Activates PIF interface -* -* This function activates PIF interface by taking control of LCD pins -* -* @note -* When activated, LCD pins will be defined as follows for PIF operation -* -* CLD[17:0] = pif_data[17:0] -* CLD[23:18] = pif_address[5:0] -* CLPOWER = pif_wr_str -* CLCP = pif_rd_str -* CLAC = pif_hat1 -* CLFP = pif_hrdy1 -* CLLP = pif_hat2 -* GPIO[42] = pif_hrdy2 -* -* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_activatePifInterface(void) -{ - reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE); -} - -/****************************************************************************/ -/** -* @brief Activates LCD interface -* -* This function activates LCD interface -* -* @note -* When activated, LCD pins will be defined as follows -* -* CLD[17:0] = LCD data -* CLD[23:18] = LCD data -* CLPOWER = LCD power -* CLCP = -* CLAC = LCD ack -* CLFP = -* CLLP = -*/ -/****************************************************************************/ -static inline void chipcHw_activateLcdInterface(void) -{ - reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE); -} - -/****************************************************************************/ -/** -* @brief Deactivates PIF/LCD interface -* -* This function deactivates PIF/LCD interface -* -* @note -* When deactivated LCD pins will be in rti-stated -* -*/ -/****************************************************************************/ -static inline void chipcHw_deactivatePifLcdInterface(void) -{ - reg32_write(&pChipcHw->LcdPifMode, 0); -} - -/****************************************************************************/ -/** -* @brief Select GE2 -* -* This function select GE2 as the graphic engine -* -*/ -/****************************************************************************/ -static inline void chipcHw_selectGE2(void) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL); -} - -/****************************************************************************/ -/** -* @brief Select GE3 -* -* This function select GE3 as the graphic engine -* -*/ -/****************************************************************************/ -static inline void chipcHw_selectGE3(void) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL); -} - -/****************************************************************************/ -/** -* @brief Get to know the configuration of GPIO pin -* -*/ -/****************************************************************************/ -static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin) -{ - return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) & - (chipcHw_REG_GPIO_MUX_MASK << - chipcHw_REG_GPIO_MUX_POSITION(pin))) >> - chipcHw_REG_GPIO_MUX_POSITION(pin); -} - -/****************************************************************************/ -/** -* @brief Configure GPIO pin function -* -*/ -/****************************************************************************/ -static inline void chipcHw_setGpioPinFunction(int pin, - chipcHw_GPIO_FUNCTION_e func) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &= - ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin)); - *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |= - func << chipcHw_REG_GPIO_MUX_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin slew rate -* -* This function sets the slew of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinSlewRate(uint32_t pin, - chipcHw_PIN_SLEW_RATE_e slewRate) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &= - ~(chipcHw_REG_SLEW_RATE_MASK << - chipcHw_REG_SLEW_RATE_POSITION(pin)); - *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |= - (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin output drive current -* -* This function sets output drive current of individual pin -* -* Note: Avoid the use of the word 'current' since linux headers define this -* to be the current task. -*/ -/****************************************************************************/ -static inline void chipcHw_setPinOutputCurrent(uint32_t pin, - chipcHw_PIN_CURRENT_STRENGTH_e - curr) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_CURRENT(pin)) &= - ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin)); - *((uint32_t *) chipcHw_REG_CURRENT(pin)) |= - (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin pullup register -* -* This function sets pullup register of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_PULLUP(pin)) &= - ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin)); - *((uint32_t *) chipcHw_REG_PULLUP(pin)) |= - (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin input type -* -* This function sets input type of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinInputType(uint32_t pin, - chipcHw_PIN_INPUTTYPE_e inputType) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &= - ~(chipcHw_REG_INPUTTYPE_MASK << - chipcHw_REG_INPUTTYPE_POSITION(pin)); - *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |= - (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Power up the USB PHY -* -* This function powers up the USB PHY -* -*/ -/****************************************************************************/ -static inline void chipcHw_powerUpUsbPhy(void) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_POWERON); -} - -/****************************************************************************/ -/** -* @brief Power down the USB PHY -* -* This function powers down the USB PHY -* -*/ -/****************************************************************************/ -static inline void chipcHw_powerDownUsbPhy(void) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_POWEROFF); -} - -/****************************************************************************/ -/** -* @brief Set the 2nd USB as host -* -* This function sets the 2nd USB as host -* -*/ -/****************************************************************************/ -static inline void chipcHw_setUsbHost(void) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_MODE_HOST); -} - -/****************************************************************************/ -/** -* @brief Set the 2nd USB as device -* -* This function sets the 2nd USB as device -* -*/ -/****************************************************************************/ -static inline void chipcHw_setUsbDevice(void) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE); -} - -/****************************************************************************/ -/** -* @brief Lower layer function to enable/disable a clock of a certain device -* -* This function enables/disables a core clock -* -*/ -/****************************************************************************/ -static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, - chipcHw_OPTYPE_e type, int mode) -{ - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - - switch (clock) { - case chipcHw_CLOCK_DDR: - pPLLReg = &pChipcHw->DDRClock; - break; - case chipcHw_CLOCK_ARM: - pPLLReg = &pChipcHw->ARMClock; - break; - case chipcHw_CLOCK_ESW: - pPLLReg = &pChipcHw->ESWClock; - break; - case chipcHw_CLOCK_VPM: - pPLLReg = &pChipcHw->VPMClock; - break; - case chipcHw_CLOCK_ESW125: - pPLLReg = &pChipcHw->ESW125Clock; - break; - case chipcHw_CLOCK_UART: - pPLLReg = &pChipcHw->UARTClock; - break; - case chipcHw_CLOCK_SDIO0: - pPLLReg = &pChipcHw->SDIO0Clock; - break; - case chipcHw_CLOCK_SDIO1: - pPLLReg = &pChipcHw->SDIO1Clock; - break; - case chipcHw_CLOCK_SPI: - pPLLReg = &pChipcHw->SPIClock; - break; - case chipcHw_CLOCK_ETM: - pPLLReg = &pChipcHw->ETMClock; - break; - case chipcHw_CLOCK_USB: - pPLLReg = &pChipcHw->USBClock; - if (type == chipcHw_OPTYPE_OUTPUT) { - if (mode) { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } - } - break; - case chipcHw_CLOCK_LCD: - pPLLReg = &pChipcHw->LCDClock; - if (type == chipcHw_OPTYPE_OUTPUT) { - if (mode) { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } - } - break; - case chipcHw_CLOCK_APM: - pPLLReg = &pChipcHw->APMClock; - if (type == chipcHw_OPTYPE_OUTPUT) { - if (mode) { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } - } - break; - case chipcHw_CLOCK_BUS: - pClockCtrl = &pChipcHw->ACLKClock; - break; - case chipcHw_CLOCK_OTP: - pClockCtrl = &pChipcHw->OTPClock; - break; - case chipcHw_CLOCK_I2C: - pClockCtrl = &pChipcHw->I2CClock; - break; - case chipcHw_CLOCK_I2S0: - pClockCtrl = &pChipcHw->I2S0Clock; - break; - case chipcHw_CLOCK_RTBUS: - pClockCtrl = &pChipcHw->RTBUSClock; - break; - case chipcHw_CLOCK_APM100: - pClockCtrl = &pChipcHw->APM100Clock; - break; - case chipcHw_CLOCK_TSC: - pClockCtrl = &pChipcHw->TSCClock; - break; - case chipcHw_CLOCK_LED: - pClockCtrl = &pChipcHw->LEDClock; - break; - case chipcHw_CLOCK_I2S1: - pClockCtrl = &pChipcHw->I2S1Clock; - break; - } - - if (pPLLReg) { - switch (type) { - case chipcHw_OPTYPE_OUTPUT: - /* PLL clock output enable/disable */ - if (mode) { - if (clock == chipcHw_CLOCK_DDR) { - /* DDR clock enable is inverted */ - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } - } else { - if (clock == chipcHw_CLOCK_DDR) { - /* DDR clock disable is inverted */ - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } else { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } - } - break; - case chipcHw_OPTYPE_BYPASS: - /* PLL clock bypass enable/disable */ - if (mode) { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - } else { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - } - break; - } - } else if (pClockCtrl) { - switch (type) { - case chipcHw_OPTYPE_OUTPUT: - if (mode) { - reg32_modify_or(pClockCtrl, - chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE); - } else { - reg32_modify_and(pClockCtrl, - ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE); - } - break; - case chipcHw_OPTYPE_BYPASS: - if (mode) { - reg32_modify_or(pClockCtrl, - chipcHw_REG_DIV_CLOCK_BYPASS_SELECT); - } else { - reg32_modify_and(pClockCtrl, - ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT); - } - break; - } - } -} - -/****************************************************************************/ -/** -* @brief Disables a core clock of a certain device -* -* This function disables a core clock -* -* @note no change in power consumption -*/ -/****************************************************************************/ -static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock) -{ - - /* Disable output of the clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0); -} - -/****************************************************************************/ -/** -* @brief Enable a core clock of a certain device -* -* This function enables a core clock -* -* @note no change in power consumption -*/ -/****************************************************************************/ -static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock) -{ - - /* Enable output of the clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1); -} - -/****************************************************************************/ -/** -* @brief Enables bypass clock of a certain device -* -* This function enables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock) -{ - /* Enable bypass clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1); -} - -/****************************************************************************/ -/** -* @brief Disabled bypass clock of a certain device -* -* This function disables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock) -{ - /* Disable bypass clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0); - -} - -/****************************************************************************/ -/** @brief Checks if software strap is enabled - * - * @return 1 : When enable - * 0 : When disable - */ -/****************************************************************************/ -static inline int chipcHw_isSoftwareStrapsEnable(void) -{ - return pChipcHw->SoftStraps & 0x00000001; -} - -/****************************************************************************/ -/** @brief Enable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsEnable(void) -{ - reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001); -} - -/****************************************************************************/ -/** @brief Disable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsDisable(void) -{ - reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001)); -} - -/****************************************************************************/ -/** @brief PLL test enable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestEnable(void) -{ - reg32_modify_or(&pChipcHw->PLLConfig, - chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief PLL2 test enable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestEnable(void) -{ - reg32_modify_or(&pChipcHw->PLLConfig2, - chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief PLL test disable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestDisable(void) -{ - reg32_modify_and(&pChipcHw->PLLConfig, - ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief PLL2 test disable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestDisable(void) -{ - reg32_modify_and(&pChipcHw->PLLConfig2, - ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief Get PLL test status - */ -/****************************************************************************/ -static inline int chipcHw_isPllTestEnable(void) -{ - return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; -} - -/****************************************************************************/ -/** @brief Get PLL2 test status - */ -/****************************************************************************/ -static inline int chipcHw_isPll2TestEnable(void) -{ - return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; -} - -/****************************************************************************/ -/** @brief PLL test select - */ -/****************************************************************************/ -static inline void chipcHw_pllTestSelect(uint32_t val) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK; - pChipcHw->PLLConfig |= - (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** @brief PLL2 test select - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestSelect(uint32_t val) -{ - - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK; - pChipcHw->PLLConfig2 |= - (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** @brief Get PLL test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPllTestSelected(void) -{ - return (uint8_t) ((pChipcHw-> - PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) - >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); -} - -/****************************************************************************/ -/** @brief Get PLL2 test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPll2TestSelected(void) -{ - return (uint8_t) ((pChipcHw-> - PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) - >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); -} - -/****************************************************************************/ -/** -* @brief Disable the PLL1 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll1Disable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable the PLL2 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll2Disable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set VPM SW phase alignment interrupt mode -* -* This function sets VPM phase alignment interrupt -*/ -/****************************************************************************/ -static inline void -chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode) -{ - REG_LOCAL_IRQ_SAVE; - if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) { - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE; - } else { - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE; - } - pChipcHw->VPMPhaseCtrl2 = - (pChipcHw-> - VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK << - chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set DDR phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void -chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin) -{ - uint32_t ge = 0; - uint32_t le = 0; - - switch (margin) { - case chipcHw_DDR_HW_PHASE_MARGIN_STRICT: - ge = 0x0F; - le = 0x0F; - break; - case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM: - ge = 0x03; - le = 0x3F; - break; - case chipcHw_DDR_HW_PHASE_MARGIN_WIDE: - ge = 0x01; - le = 0x7F; - break; - } - - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->DDRPhaseCtrl1 &= - ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK << - chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT) - || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK << - chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT)); - - pChipcHw->DDRPhaseCtrl1 |= - ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT) - || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT)); - - REG_LOCAL_IRQ_RESTORE; - } -} - -/****************************************************************************/ -/** -* @brief Set VPM phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void -chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin) -{ - uint32_t ge = 0; - uint32_t le = 0; - - switch (margin) { - case chipcHw_VPM_HW_PHASE_MARGIN_STRICT: - ge = 0x0F; - le = 0x0F; - break; - case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM: - ge = 0x03; - le = 0x3F; - break; - case chipcHw_VPM_HW_PHASE_MARGIN_WIDE: - ge = 0x01; - le = 0x7F; - break; - } - - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->VPMPhaseCtrl1 &= - ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK << - chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT) - || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK << - chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT)); - - pChipcHw->VPMPhaseCtrl1 |= - ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT) - || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT)); - - REG_LOCAL_IRQ_RESTORE; - } -} - -/****************************************************************************/ -/** -* @brief Checks DDR phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; -} - -/****************************************************************************/ -/** -* @brief Checks VPM phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; -} - -/****************************************************************************/ -/** -* @brief Get DDR phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> - chipcHw_REG_DDR_PHASE_STATUS_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get VPM phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> - chipcHw_REG_VPM_PHASE_STATUS_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get DDR phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrPhaseControl(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> - chipcHw_REG_DDR_PHASE_CTRL_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get VPM phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmPhaseControl(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> - chipcHw_REG_VPM_PHASE_CTRL_SHIFT; -} - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a DDR phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl2 &= - ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK << - chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT); - pChipcHw->DDRPhaseCtrl2 |= - (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) << - chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a VPM phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl2 &= - ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK << - chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT); - pChipcHw->VPMPhaseCtrl2 |= - (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) << - chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Clear DDR phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void) -{ - REG_LOCAL_IRQ_SAVE; - /* Clear timeout interrupt service bit */ - pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED; - pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Clear VPM phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void) -{ - REG_LOCAL_IRQ_SAVE; - /* Clear timeout interrupt service bit */ - pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED; - pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */ - /* Enable timeout interrupt */ - pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */ - /* Enable timeout interrupt */ - pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -#endif /* CHIPC_INLINE_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h deleted file mode 100644 index b162448f613c..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h +++ /dev/null @@ -1,530 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file chipcHw_reg.h -* -* @brief Definitions for low level chip control registers -* -*/ -/****************************************************************************/ -#ifndef CHIPCHW_REG_H -#define CHIPCHW_REG_H - -#include -#include -#include - -#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC - -typedef struct { - uint32_t ChipId; /* Chip ID */ - uint32_t DDRClock; /* PLL1 Channel 1 for DDR clock */ - uint32_t ARMClock; /* PLL1 Channel 2 for ARM clock */ - uint32_t ESWClock; /* PLL1 Channel 3 for ESW system clock */ - uint32_t VPMClock; /* PLL1 Channel 4 for VPM clock */ - uint32_t ESW125Clock; /* PLL1 Channel 5 for ESW 125MHz clock */ - uint32_t UARTClock; /* PLL1 Channel 6 for UART clock */ - uint32_t SDIO0Clock; /* PLL1 Channel 7 for SDIO 0 clock */ - uint32_t SDIO1Clock; /* PLL1 Channel 8 for SDIO 1 clock */ - uint32_t SPIClock; /* PLL1 Channel 9 for SPI master Clock */ - uint32_t ETMClock; /* PLL1 Channel 10 for ARM ETM Clock */ - - uint32_t ACLKClock; /* ACLK Clock (Divider) */ - uint32_t OTPClock; /* OTP Clock (Divider) */ - uint32_t I2CClock; /* I2C Clock (CK_13m) (Divider) */ - uint32_t I2S0Clock; /* I2S0 Clock (Divider) */ - uint32_t RTBUSClock; /* RTBUS (DDR PHY Config.) Clock (Divider) */ - uint32_t pad1; - uint32_t APM100Clock; /* APM 100MHz CLK Clock (Divider) */ - uint32_t TSCClock; /* TSC Clock (Divider) */ - uint32_t LEDClock; /* LED Clock (Divider) */ - - uint32_t USBClock; /* PLL2 Channel 1 for USB clock */ - uint32_t LCDClock; /* PLL2 Channel 2 for LCD clock */ - uint32_t APMClock; /* PLL2 Channel 3 for APM 200 MHz clock */ - - uint32_t BusIntfClock; /* Bus interface clock */ - - uint32_t PLLStatus; /* PLL status register (PLL1) */ - uint32_t PLLConfig; /* PLL configuration register (PLL1) */ - uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */ - uint32_t PLLDivider; /* PLL divider control register (PLL1) */ - uint32_t PLLControl1; /* PLL analog control register #1 (PLL1) */ - uint32_t PLLControl2; /* PLL analog control register #2 (PLL1) */ - - uint32_t I2S1Clock; /* I2S1 Clock */ - uint32_t AudioEnable; /* Enable/ disable audio channel */ - uint32_t SoftReset1; /* Reset blocks */ - uint32_t SoftReset2; /* Reset blocks */ - uint32_t Spare1; /* Phase align interrupts */ - uint32_t Sticky; /* Sticky bits */ - uint32_t MiscCtrl; /* Misc. control */ - uint32_t pad3[3]; - - uint32_t PLLStatus2; /* PLL status register (PLL2) */ - uint32_t PLLConfig2; /* PLL configuration register (PLL2) */ - uint32_t PLLPreDivider2; /* PLL pre-divider control register (PLL2) */ - uint32_t PLLDivider2; /* PLL divider control register (PLL2) */ - uint32_t PLLControl12; /* PLL analog control register #1 (PLL2) */ - uint32_t PLLControl22; /* PLL analog control register #2 (PLL2) */ - - uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */ - uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */ - uint32_t PhaseAlignStatus; /* DDR/VPM Clock Phase Alignment Status */ - uint32_t PhaseCtrlStatus; /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */ - uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */ - uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */ - uint32_t pad4[9]; - - uint32_t SoftOTP1; /* Software OTP control */ - uint32_t SoftOTP2; /* Software OTP control */ - uint32_t SoftStraps; /* Software strap */ - uint32_t PinStraps; /* Pin Straps */ - uint32_t DiffOscCtrl; /* Diff oscillator control */ - uint32_t DiagsCtrl; /* Diagnostic control */ - uint32_t DiagsOutputCtrl; /* Diagnostic output enable */ - uint32_t DiagsReadBackCtrl; /* Diagnostic read back control */ - - uint32_t LcdPifMode; /* LCD/PIF Pin Sharing MUX Mode */ - - uint32_t GpioMux_0_7; /* Pin Sharing MUX0 Control */ - uint32_t GpioMux_8_15; /* Pin Sharing MUX1 Control */ - uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */ - uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */ - uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */ - uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */ - uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */ - uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */ - - uint32_t GpioSR_0_7; /* Slew rate for GPIO 0 - 7 */ - uint32_t GpioSR_8_15; /* Slew rate for GPIO 8 - 15 */ - uint32_t GpioSR_16_23; /* Slew rate for GPIO 16 - 23 */ - uint32_t GpioSR_24_31; /* Slew rate for GPIO 24 - 31 */ - uint32_t GpioSR_32_39; /* Slew rate for GPIO 32 - 39 */ - uint32_t GpioSR_40_47; /* Slew rate for GPIO 40 - 47 */ - uint32_t GpioSR_48_55; /* Slew rate for GPIO 48 - 55 */ - uint32_t GpioSR_56_63; /* Slew rate for GPIO 56 - 63 */ - uint32_t MiscSR_0_7; /* Slew rate for MISC 0 - 7 */ - uint32_t MiscSR_8_15; /* Slew rate for MISC 8 - 15 */ - - uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */ - uint32_t GpioPull_16_31; /* Pull up registers for GPIO 16 - 31 */ - uint32_t GpioPull_32_47; /* Pull up registers for GPIO 32 - 47 */ - uint32_t GpioPull_48_63; /* Pull up registers for GPIO 48 - 63 */ - uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */ - - uint32_t GpioInput_0_31; /* Input type for GPIO 0 - 31 */ - uint32_t GpioInput_32_63; /* Input type for GPIO 32 - 63 */ - uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */ -} chipcHw_REG_t; - -#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS) -#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC) - -#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000 -#define chipcHw_REG_CHIPID_BASE_SHIFT 12 -#define chipcHw_REG_CHIPID_REV_MASK 0x00000FFF -#define chipcHw_REG_REV_A0 0xA00 -#define chipcHw_REG_REV_B0 0x0B0 - -#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE 0x80000000 /* Allow controlling PLL registers */ -#define chipcHw_REG_PLL_STATUS_LOCKED 0x00000001 /* PLL is settled */ -#define chipcHw_REG_PLL_CONFIG_D_RESET 0x00000008 /* Digital reset */ -#define chipcHw_REG_PLL_CONFIG_A_RESET 0x00000004 /* Analog reset */ -#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE 0x00000020 /* Bypass enable */ -#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE 0x00000010 /* Output enable */ -#define chipcHw_REG_PLL_CONFIG_POWER_DOWN 0x00000001 /* Power down */ -#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ 1600000000 /* 1.6GHz VCO split frequency */ -#define chipcHw_REG_PLL_CONFIG_VCO_800_1600 0x00000000 /* VCO range 800-1600 MHz */ -#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200 0x00000080 /* VCO range 1601-3200 MHz */ -#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE 0x00010000 /* PLL test output enable */ -#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK 0x003E0000 /* Mask to set test values */ -#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT 17 - -#define chipcHw_REG_PLL_CLOCK_PHASE_COMP 0x00800000 /* Phase comparator output */ -#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK 0x00300000 /* Clock to bus ratio mask */ -#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT 20 /* Number of bits to be shifted */ -#define chipcHw_REG_PLL_CLOCK_POWER_DOWN 0x00080000 /* PLL channel power down */ -#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO 0x00040000 /* Use GPIO as source */ -#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT 0x00020000 /* Select bypass clock */ -#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE 0x00010000 /* Clock gated ON */ -#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE 0x00008000 /* Clock phase update enable */ -#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT 8 /* Number of bits to be shifted */ -#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK 0x00003F00 /* Phase control mask */ -#define chipcHw_REG_PLL_CLOCK_MDIV_MASK 0x000000FF /* Clock post divider mask - - 00000000 = divide-by-256 - 00000001 = divide-by-1 - 00000010 = divide-by-2 - 00000011 = divide-by-3 - 00000100 = divide-by-4 - 00000101 = divide-by-5 - 00000110 = divide-by-6 - . - . - 11111011 = divide-by-251 - 11111100 = divide-by-252 - 11111101 = divide-by-253 - 11111110 = divide-by-254 - */ - -#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER 0x00040000 /* NON-PLL clock source select */ -#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT 0x00020000 /* NON-PLL clock bypass enable */ -#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE 0x00010000 /* NON-PLL clock output enable */ -#define chipcHw_REG_DIV_CLOCK_DIV_MASK 0x000000FF /* NON-PLL clock post-divide mask */ -#define chipcHw_REG_DIV_CLOCK_DIV_256 0x00000000 /* NON-PLL clock post-divide by 256 */ - -#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT 0 -#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT 4 -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT 8 -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK 0x0001FF00 -#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN 0x02000000 -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK 0x00700000 /* Divider mask */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER 0x00000000 /* Integer-N Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT 0x00100000 /* MASH Sigma-Delta Modulator Unit Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT 0x00200000 /* MFB Sigma-Delta Modulator Unit Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 0x00300000 /* MASH Sigma-Delta Modulator 1/8 Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8 0x00400000 /* MFB Sigma-Delta Modulator 1/8 Mode */ - -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco) ((vco) / chipcHw_XTAL_FREQ_Hz) -#define chipcHw_REG_PLL_PREDIVIDER_P1 1 -#define chipcHw_REG_PLL_PREDIVIDER_P2 1 - -#define chipcHw_REG_PLL_DIVIDER_M1DIV 0x03000000 -#define chipcHw_REG_PLL_DIVIDER_FRAC 0x00FFFFFF /* Fractional divider */ - -#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS (0x00FFFFFF) /* To attain spread with max frequency */ - -#define chipcHw_REG_PLL_DIVIDER_NDIV_f 0 /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f / - chipcHw_REG_PLL_DIVIDER_FRAC - = 0, when SS is disable - */ - -#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz) ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz))) - -#define chipcHw_REG_ACLKClock_CLK_DIV_MASK 0x3 - -/* System booting strap options */ -#define chipcHw_STRAPS_SOFT_OVERRIDE 0x00000001 /* Software Strap Override */ - -#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8 0x00000000 /* 8 bit NAND FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16 0x00000002 /* 16 bit NOR FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH 0x00000004 /* Serial FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 0x00000006 /* 16 bit NAND FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_UART 0x00000008 /* UART Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_MASK 0x0000000E /* Mask */ - -/* System boot option */ -#define chipcHw_STRAPS_BOOT_OPTION_BROM 0x00000000 /* Boot from Boot ROM */ -#define chipcHw_STRAPS_BOOT_OPTION_ARAM 0x00000020 /* Boot from ARAM */ -#define chipcHw_STRAPS_BOOT_OPTION_NOR 0x00000030 /* Boot from NOR flash */ - -/* NAND Flash page size strap options */ -#define chipcHw_STRAPS_NAND_PAGESIZE_512 0x00000000 /* NAND FLASH page size of 512 bytes */ -#define chipcHw_STRAPS_NAND_PAGESIZE_2048 0x00000040 /* NAND FLASH page size of 2048 bytes */ -#define chipcHw_STRAPS_NAND_PAGESIZE_4096 0x00000080 /* NAND FLASH page size of 4096 bytes */ -#define chipcHw_STRAPS_NAND_PAGESIZE_EXT 0x000000C0 /* NAND FLASH page of extened size */ -#define chipcHw_STRAPS_NAND_PAGESIZE_MASK 0x000000C0 /* Mask */ - -#define chipcHw_STRAPS_NAND_EXTRA_CYCLE 0x00000400 /* NAND FLASH address cycle configuration */ -#define chipcHw_STRAPS_REBOOT_TO_UART 0x00000800 /* Reboot to UART on error */ - -/* Secure boot mode strap options */ -#define chipcHw_STRAPS_BOOT_MODE_NORMAL 0x00000000 /* Normal Boot */ -#define chipcHw_STRAPS_BOOT_MODE_DBG_SW 0x00000100 /* Software debugging Boot */ -#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT 0x00000200 /* Boot rom debugging Boot */ -#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET 0x00000300 /* Normal Boot (Quiet BootRom) */ -#define chipcHw_STRAPS_BOOT_MODE_MASK 0x00000300 /* Mask */ - -/* Slave Mode straps */ -#define chipcHw_STRAPS_I2CS 0x02000000 /* I2C Slave */ -#define chipcHw_STRAPS_SPIS 0x01000000 /* SPI Slave */ - -/* Strap pin options */ -#define chipcHw_REG_SW_STRAPS ((pChipcHw->PinStraps & 0x0000FC00) >> 10) - -/* PIF/LCD pin sharing defines */ -#define chipcHw_REG_LCD_PIN_ENABLE 0x00000001 /* LCD Controller is used and the pins have LCD functions */ -#define chipcHw_REG_PIF_PIN_ENABLE 0x00000002 /* LCD pins are used to perform PIF functions */ - -#define chipcHw_GPIO_COUNT 61 /* Number of GPIO pin accessible thorugh CHIPC */ - -/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */ -#define chipcHw_REG_GPIO_MUX_KEYPAD 0x00000001 /* GPIO mux for Keypad */ -#define chipcHw_REG_GPIO_MUX_I2CH 0x00000002 /* GPIO mux for I2CH */ -#define chipcHw_REG_GPIO_MUX_SPI 0x00000003 /* GPIO mux for SPI */ -#define chipcHw_REG_GPIO_MUX_UART 0x00000004 /* GPIO mux for UART */ -#define chipcHw_REG_GPIO_MUX_LEDMTXP 0x00000005 /* GPIO mux for LEDMTXP */ -#define chipcHw_REG_GPIO_MUX_LEDMTXS 0x00000006 /* GPIO mux for LEDMTXS */ -#define chipcHw_REG_GPIO_MUX_SDIO0 0x00000007 /* GPIO mux for SDIO0 */ -#define chipcHw_REG_GPIO_MUX_SDIO1 0x00000008 /* GPIO mux for SDIO1 */ -#define chipcHw_REG_GPIO_MUX_PCM 0x00000009 /* GPIO mux for PCM */ -#define chipcHw_REG_GPIO_MUX_I2S 0x0000000A /* GPIO mux for I2S */ -#define chipcHw_REG_GPIO_MUX_ETM 0x0000000B /* GPIO mux for ETM */ -#define chipcHw_REG_GPIO_MUX_DEBUG 0x0000000C /* GPIO mux for DEBUG */ -#define chipcHw_REG_GPIO_MUX_MISC 0x0000000D /* GPIO mux for MISC */ -#define chipcHw_REG_GPIO_MUX_GPIO 0x00000000 /* GPIO mux for GPIO */ -#define chipcHw_REG_GPIO_MUX(pin) (&pChipcHw->GpioMux_0_7 + ((pin) >> 3)) -#define chipcHw_REG_GPIO_MUX_POSITION(pin) (((pin) & 0x00000007) << 2) -#define chipcHw_REG_GPIO_MUX_MASK 0x0000000F /* Mask */ - -#define chipcHw_REG_SLEW_RATE_HIGH 0x00000000 /* High speed slew rate */ -#define chipcHw_REG_SLEW_RATE_NORMAL 0x00000008 /* Normal slew rate */ - /* Pins beyond 42 are defined by skipping 8 bits within the register */ -#define chipcHw_REG_SLEW_RATE(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3))) -#define chipcHw_REG_SLEW_RATE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2)) -#define chipcHw_REG_SLEW_RATE_MASK 0x00000008 /* Mask */ - -#define chipcHw_REG_CURRENT_STRENGTH_2mA 0x00000001 /* Current driving strength 2 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_4mA 0x00000002 /* Current driving strength 4 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_6mA 0x00000004 /* Current driving strength 6 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_8mA 0x00000005 /* Current driving strength 8 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_10mA 0x00000006 /* Current driving strength 10 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_12mA 0x00000007 /* Current driving strength 12 milli ampere */ -#define chipcHw_REG_CURRENT_MASK 0x00000007 /* Mask */ - /* Pins beyond 42 are defined by skipping 8 bits */ -#define chipcHw_REG_CURRENT(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3))) -#define chipcHw_REG_CURRENT_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2)) - -#define chipcHw_REG_PULL_NONE 0x00000000 /* No pull up register */ -#define chipcHw_REG_PULL_UP 0x00000001 /* Pull up register enable */ -#define chipcHw_REG_PULL_DOWN 0x00000002 /* Pull down register enable */ -#define chipcHw_REG_PULLUP_MASK 0x00000003 /* Mask */ - /* Pins beyond 42 are defined by skipping 4 bits */ -#define chipcHw_REG_PULLUP(pin) (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4))) -#define chipcHw_REG_PULLUP_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1)) - -#define chipcHw_REG_INPUTTYPE_CMOS 0x00000000 /* Normal CMOS logic */ -#define chipcHw_REG_INPUTTYPE_ST 0x00000001 /* High speed Schmitt Trigger */ -#define chipcHw_REG_INPUTTYPE_MASK 0x00000001 /* Mask */ - /* Pins beyond 42 are defined by skipping 2 bits */ -#define chipcHw_REG_INPUTTYPE(pin) (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5))) -#define chipcHw_REG_INPUTTYPE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F))) - -/* Device connected to the bus clock */ -#define chipcHw_REG_BUS_CLOCK_ARM 0x00000001 /* Bus interface clock for ARM */ -#define chipcHw_REG_BUS_CLOCK_VDEC 0x00000002 /* Bus interface clock for VDEC */ -#define chipcHw_REG_BUS_CLOCK_ARAM 0x00000004 /* Bus interface clock for ARAM */ -#define chipcHw_REG_BUS_CLOCK_HPM 0x00000008 /* Bus interface clock for HPM */ -#define chipcHw_REG_BUS_CLOCK_DDRC 0x00000010 /* Bus interface clock for DDRC */ -#define chipcHw_REG_BUS_CLOCK_DMAC0 0x00000020 /* Bus interface clock for DMAC0 */ -#define chipcHw_REG_BUS_CLOCK_DMAC1 0x00000040 /* Bus interface clock for DMAC1 */ -#define chipcHw_REG_BUS_CLOCK_NVI 0x00000080 /* Bus interface clock for NVI */ -#define chipcHw_REG_BUS_CLOCK_ESW 0x00000100 /* Bus interface clock for ESW */ -#define chipcHw_REG_BUS_CLOCK_GE 0x00000200 /* Bus interface clock for GE */ -#define chipcHw_REG_BUS_CLOCK_I2CH 0x00000400 /* Bus interface clock for I2CH */ -#define chipcHw_REG_BUS_CLOCK_I2S0 0x00000800 /* Bus interface clock for I2S0 */ -#define chipcHw_REG_BUS_CLOCK_I2S1 0x00001000 /* Bus interface clock for I2S1 */ -#define chipcHw_REG_BUS_CLOCK_VRAM 0x00002000 /* Bus interface clock for VRAM */ -#define chipcHw_REG_BUS_CLOCK_CLCD 0x00004000 /* Bus interface clock for CLCD */ -#define chipcHw_REG_BUS_CLOCK_LDK 0x00008000 /* Bus interface clock for LDK */ -#define chipcHw_REG_BUS_CLOCK_LED 0x00010000 /* Bus interface clock for LED */ -#define chipcHw_REG_BUS_CLOCK_OTP 0x00020000 /* Bus interface clock for OTP */ -#define chipcHw_REG_BUS_CLOCK_PIF 0x00040000 /* Bus interface clock for PIF */ -#define chipcHw_REG_BUS_CLOCK_SPU 0x00080000 /* Bus interface clock for SPU */ -#define chipcHw_REG_BUS_CLOCK_SDIO0 0x00100000 /* Bus interface clock for SDIO0 */ -#define chipcHw_REG_BUS_CLOCK_SDIO1 0x00200000 /* Bus interface clock for SDIO1 */ -#define chipcHw_REG_BUS_CLOCK_SPIH 0x00400000 /* Bus interface clock for SPIH */ -#define chipcHw_REG_BUS_CLOCK_SPIS 0x00800000 /* Bus interface clock for SPIS */ -#define chipcHw_REG_BUS_CLOCK_UART0 0x01000000 /* Bus interface clock for UART0 */ -#define chipcHw_REG_BUS_CLOCK_UART1 0x02000000 /* Bus interface clock for UART1 */ -#define chipcHw_REG_BUS_CLOCK_BBL 0x04000000 /* Bus interface clock for BBL */ -#define chipcHw_REG_BUS_CLOCK_I2CS 0x08000000 /* Bus interface clock for I2CS */ -#define chipcHw_REG_BUS_CLOCK_USBH 0x10000000 /* Bus interface clock for USB Host */ -#define chipcHw_REG_BUS_CLOCK_USBD 0x20000000 /* Bus interface clock for USB Device */ -#define chipcHw_REG_BUS_CLOCK_BROM 0x40000000 /* Bus interface clock for Boot ROM */ -#define chipcHw_REG_BUS_CLOCK_TSC 0x80000000 /* Bus interface clock for Touch screen */ - -/* Software resets defines */ -#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD 0x0000000080000000ULL /* Reset Global VPM and hold */ -#define chipcHw_REG_SOFT_RESET_VPM_HOLD 0x0000000040000000ULL /* Reset VPM and hold */ -#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL 0x0000000020000000ULL /* Reset Global VPM */ -#define chipcHw_REG_SOFT_RESET_VPM 0x0000000010000000ULL /* Reset VPM */ -#define chipcHw_REG_SOFT_RESET_KEYPAD 0x0000000008000000ULL /* Reset Key pad */ -#define chipcHw_REG_SOFT_RESET_LED 0x0000000004000000ULL /* Reset LED */ -#define chipcHw_REG_SOFT_RESET_SPU 0x0000000002000000ULL /* Reset SPU */ -#define chipcHw_REG_SOFT_RESET_RNG 0x0000000001000000ULL /* Reset RNG */ -#define chipcHw_REG_SOFT_RESET_PKA 0x0000000000800000ULL /* Reset PKA */ -#define chipcHw_REG_SOFT_RESET_LCD 0x0000000000400000ULL /* Reset LCD */ -#define chipcHw_REG_SOFT_RESET_PIF 0x0000000000200000ULL /* Reset PIF */ -#define chipcHw_REG_SOFT_RESET_I2CS 0x0000000000100000ULL /* Reset I2C Slave */ -#define chipcHw_REG_SOFT_RESET_I2CH 0x0000000000080000ULL /* Reset I2C Host */ -#define chipcHw_REG_SOFT_RESET_SDIO1 0x0000000000040000ULL /* Reset SDIO 1 */ -#define chipcHw_REG_SOFT_RESET_SDIO0 0x0000000000020000ULL /* Reset SDIO 0 */ -#define chipcHw_REG_SOFT_RESET_BBL 0x0000000000010000ULL /* Reset BBL */ -#define chipcHw_REG_SOFT_RESET_I2S1 0x0000000000008000ULL /* Reset I2S1 */ -#define chipcHw_REG_SOFT_RESET_I2S0 0x0000000000004000ULL /* Reset I2S0 */ -#define chipcHw_REG_SOFT_RESET_SPIS 0x0000000000002000ULL /* Reset SPI Slave */ -#define chipcHw_REG_SOFT_RESET_SPIH 0x0000000000001000ULL /* Reset SPI Host */ -#define chipcHw_REG_SOFT_RESET_GPIO1 0x0000000000000800ULL /* Reset GPIO block 1 */ -#define chipcHw_REG_SOFT_RESET_GPIO0 0x0000000000000400ULL /* Reset GPIO block 0 */ -#define chipcHw_REG_SOFT_RESET_UART1 0x0000000000000200ULL /* Reset UART 1 */ -#define chipcHw_REG_SOFT_RESET_UART0 0x0000000000000100ULL /* Reset UART 0 */ -#define chipcHw_REG_SOFT_RESET_NVI 0x0000000000000080ULL /* Reset NVI */ -#define chipcHw_REG_SOFT_RESET_WDOG 0x0000000000000040ULL /* Reset Watch dog */ -#define chipcHw_REG_SOFT_RESET_TMR 0x0000000000000020ULL /* Reset Timer */ -#define chipcHw_REG_SOFT_RESET_ETM 0x0000000000000010ULL /* Reset ETM */ -#define chipcHw_REG_SOFT_RESET_ARM_HOLD 0x0000000000000008ULL /* Reset ARM and HOLD */ -#define chipcHw_REG_SOFT_RESET_ARM 0x0000000000000004ULL /* Reset ARM */ -#define chipcHw_REG_SOFT_RESET_CHIP_WARM 0x0000000000000002ULL /* Chip warm reset */ -#define chipcHw_REG_SOFT_RESET_CHIP_SOFT 0x0000000000000001ULL /* Chip soft reset */ -#define chipcHw_REG_SOFT_RESET_VDEC 0x0000100000000000ULL /* Video decoder */ -#define chipcHw_REG_SOFT_RESET_GE 0x0000080000000000ULL /* Graphics engine */ -#define chipcHw_REG_SOFT_RESET_OTP 0x0000040000000000ULL /* Reset OTP */ -#define chipcHw_REG_SOFT_RESET_USB2 0x0000020000000000ULL /* Reset USB2 */ -#define chipcHw_REG_SOFT_RESET_USB1 0x0000010000000000ULL /* Reset USB 1 */ -#define chipcHw_REG_SOFT_RESET_USB 0x0000008000000000ULL /* Reset USB 1 and USB2 soft reset */ -#define chipcHw_REG_SOFT_RESET_ESW 0x0000004000000000ULL /* Reset Ethernet switch */ -#define chipcHw_REG_SOFT_RESET_ESWCLK 0x0000002000000000ULL /* Reset Ethernet switch clock */ -#define chipcHw_REG_SOFT_RESET_DDRPHY 0x0000001000000000ULL /* Reset DDR Physical */ -#define chipcHw_REG_SOFT_RESET_DDR 0x0000000800000000ULL /* Reset DDR Controller */ -#define chipcHw_REG_SOFT_RESET_TSC 0x0000000400000000ULL /* Reset Touch screen */ -#define chipcHw_REG_SOFT_RESET_PCM 0x0000000200000000ULL /* Reset PCM device */ -#define chipcHw_REG_SOFT_RESET_APM 0x0000200100000000ULL /* Reset APM device */ - -#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD 0x8000000000000000ULL /* Unhold Global VPM */ -#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD 0x4000000000000000ULL /* Unhold VPM */ -#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD 0x2000000000000000ULL /* Unhold ARM reset */ -#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK 0xF000000000000000ULL /* Mask to handle unhold request */ - -/* Audio channel control defines */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL 0x00000001 /* Enable all audio channel */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A 0x00000002 /* Enable channel A */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B 0x00000004 /* Enable channel B */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C 0x00000008 /* Enable channel C */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK 0x00000010 /* Enable NTP clock */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK 0x00000020 /* Enable PCM0 clock */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK 0x00000040 /* Enable PCM1 clock */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK 0x00000080 /* Enable APM clock */ - -/* Misc. chip control defines */ -#define chipcHw_REG_MISC_CTRL_GE_SEL 0x00040000 /* Select GE2/GE3 */ -#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S1 */ -#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO 0x00020000 /* Use external clock via GPIO pin 26 for I2S1 */ -#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S0 */ -#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO 0x00010000 /* Use external clock via GPIO pin 45 for I2S0 */ -#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE 0x00008000 /* Disable ARM CP15 bit */ -#define chipcHw_REG_MISC_CTRL_RTC_DISABLE 0x00000008 /* Disable RTC registers */ -#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE 0x00000004 /* Disable Battery Backed RAM */ -#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST 0x00000002 /* Set USB as host */ -#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE 0xFFFFFFFD /* Set USB as device */ -#define chipcHw_REG_MISC_CTRL_USB_POWERON 0xFFFFFFFE /* Power up USB */ -#define chipcHw_REG_MISC_CTRL_USB_POWEROFF 0x00000001 /* Power down USB */ - -/* OTP configuration defines */ -#define chipcHw_REG_OTP_SECURITY_OFF 0x0000020000000000ULL /* Security support is OFF */ -#define chipcHw_REG_OTP_SPU_SLOW 0x0000010000000000ULL /* Limited SPU throughput */ -#define chipcHw_REG_OTP_LCD_SPEED 0x0000000600000000ULL /* Set VPM speed one */ -#define chipcHw_REG_OTP_VPM_SPEED_1 0x0000000100000000ULL /* Set VPM speed one */ -#define chipcHw_REG_OTP_VPM_SPEED_0 0x0000000080000000ULL /* Set VPM speed zero */ -#define chipcHw_REG_OTP_AXI_SPEED 0x0000000060000000ULL /* Set maximum AXI bus speed */ -#define chipcHw_REG_OTP_APM_DISABLE 0x000000001F000000ULL /* Disable APM */ -#define chipcHw_REG_OTP_PIF_DISABLE 0x0000000000200000ULL /* Disable PIF */ -#define chipcHw_REG_OTP_VDEC_DISABLE 0x0000000000100000ULL /* Disable Video decoder */ -#define chipcHw_REG_OTP_BBL_DISABLE 0x0000000000080000ULL /* Disable RTC and BBRAM */ -#define chipcHw_REG_OTP_LED_DISABLE 0x0000000000040000ULL /* Disable LED */ -#define chipcHw_REG_OTP_GE_DISABLE 0x0000000000020000ULL /* Disable Graphics Engine */ -#define chipcHw_REG_OTP_LCD_DISABLE 0x0000000000010000ULL /* Disable LCD */ -#define chipcHw_REG_OTP_KEYPAD_DISABLE 0x0000000000008000ULL /* Disable keypad */ -#define chipcHw_REG_OTP_UART_DISABLE 0x0000000000004000ULL /* Disable UART */ -#define chipcHw_REG_OTP_SDIOH_DISABLE 0x0000000000003000ULL /* Disable SDIO host */ -#define chipcHw_REG_OTP_HSS_DISABLE 0x0000000000000C00ULL /* Disable HSS */ -#define chipcHw_REG_OTP_TSC_DISABLE 0x0000000000000200ULL /* Disable touch screen */ -#define chipcHw_REG_OTP_USB_DISABLE 0x0000000000000180ULL /* Disable USB */ -#define chipcHw_REG_OTP_SGMII_DISABLE 0x0000000000000060ULL /* Disable SGMII */ -#define chipcHw_REG_OTP_ETH_DISABLE 0x0000000000000018ULL /* Disable gigabit ethernet */ -#define chipcHw_REG_OTP_ETH_PHY_DISABLE 0x0000000000000006ULL /* Disable ethernet PHY */ -#define chipcHw_REG_OTP_VPM_DISABLE 0x0000000000000001ULL /* Disable VPM */ - -/* Sticky bit defines */ -#define chipcHw_REG_STICKY_BOOT_DONE 0x00000001 /* Boot done */ -#define chipcHw_REG_STICKY_SOFT_RESET 0x00000002 /* ARM soft reset */ -#define chipcHw_REG_STICKY_GENERAL_1 0x00000004 /* General purpose bit 1 */ -#define chipcHw_REG_STICKY_GENERAL_2 0x00000008 /* General purpose bit 2 */ -#define chipcHw_REG_STICKY_GENERAL_3 0x00000010 /* General purpose bit 3 */ -#define chipcHw_REG_STICKY_GENERAL_4 0x00000020 /* General purpose bit 4 */ -#define chipcHw_REG_STICKY_GENERAL_5 0x00000040 /* General purpose bit 5 */ -#define chipcHw_REG_STICKY_POR_BROM 0x00000080 /* Special sticky bit for security - set in BROM to avoid other modes being entered */ -#define chipcHw_REG_STICKY_ARM_RESET 0x00000100 /* ARM reset */ -#define chipcHw_REG_STICKY_CHIP_SOFT_RESET 0x00000200 /* Chip soft reset */ -#define chipcHw_REG_STICKY_CHIP_WARM_RESET 0x00000400 /* Chip warm reset */ -#define chipcHw_REG_STICKY_WDOG_RESET 0x00000800 /* Watchdog reset */ -#define chipcHw_REG_STICKY_OTP_RESET 0x00001000 /* OTP reset */ - - /* HW phase alignment defines *//* Spare1 register definitions */ -#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE 0x80000000 /* Enable DDR phase align panic interrupt */ -#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE 0x40000000 /* Enable VPM phase align panic interrupt */ -#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE 0x00000002 /* Enable access to VPM using system BUS */ -#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE 0x00000001 /* Enable access to DDR using system BUS */ - /* DDRPhaseCtrl1 register definitions */ -#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable DDR SW phase alignment */ -#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable DDR HW phase alignment */ -#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK 0x0000007F /* DDR lower threshold for phase alignment */ -#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT 23 -#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK 0x0000007F /* DDR upper threshold for phase alignment */ -#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT 16 -#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to run next DDR phase alignment */ -#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0 - /* VPMPhaseCtrl1 register definitions */ -#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable VPM SW phase alignment */ -#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable VPM HW phase alignment */ -#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK 0x0000007F /* VPM lower threshold for phase alignment */ -#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT 23 -#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK 0x0000007F /* VPM upper threshold for phase alignment */ -#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT 16 -#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to complete the VPM phase alignment */ -#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0 - /* PhaseAlignStatus register definitions */ -#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS 0x80000000 /* DDR time out interrupt status */ -#define chipcHw_REG_DDR_PHASE_STATUS_MASK 0x0000007F /* DDR phase status value */ -#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT 24 -#define chipcHw_REG_DDR_PHASE_ALIGNED 0x00800000 /* DDR Phase aligned status */ -#define chipcHw_REG_DDR_LOAD 0x00400000 /* Load DDR phase status */ -#define chipcHw_REG_DDR_PHASE_CTRL_MASK 0x0000003F /* DDR phase control value */ -#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT 16 -#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS 0x80000000 /* VPM time out interrupt status */ -#define chipcHw_REG_VPM_PHASE_STATUS_MASK 0x0000007F /* VPM phase status value */ -#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT 8 -#define chipcHw_REG_VPM_PHASE_ALIGNED 0x00000080 /* VPM Phase aligned status */ -#define chipcHw_REG_VPM_LOAD 0x00000040 /* Load VPM phase status */ -#define chipcHw_REG_VPM_PHASE_CTRL_MASK 0x0000003F /* VPM phase control value */ -#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT 0 - /* DDRPhaseCtrl2 register definitions */ -#define chipcHw_REG_DDR_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */ -#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */ -#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */ -#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT 20 -#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait to settle ph_ctrl and load_ch */ -#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT 16 -#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for DDR HW phase alignment */ -#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT 0 - /* VPMPhaseCtrl2 register definitions */ -#define chipcHw_REG_VPM_INTR_SELECT_MASK 0x00000003 /* Interrupt select */ -#define chipcHw_REG_VPM_INTR_SELECT_SHIFT 26 -#define chipcHw_REG_VPM_INTR_DISABLE 0x00000000 -#define chipcHw_REG_VPM_INTR_FAST (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) -#define chipcHw_REG_VPM_INTR_MEDIUM (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) -#define chipcHw_REG_VPM_INTR_SLOW (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) -#define chipcHw_REG_VPM_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */ -#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */ -#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */ -#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT 20 -#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait cycle to settle ph_ctrl and load_ch */ -#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT 16 -#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for VPM HW phase alignment */ -#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT 0 - -#endif /* CHIPCHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h deleted file mode 100644 index f1b68e26fa6d..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h +++ /dev/null @@ -1,872 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file ddrcReg.h -* -* @brief Register definitions for BCMRING DDR2 Controller and PHY -* -*/ -/****************************************************************************/ - -#ifndef DDRC_REG_H -#define DDRC_REG_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#include - -/* ---- Public Constants and Types --------------------------------------- */ - -/*********************************************************************/ -/* DDR2 Controller (ARM PL341) register definitions */ -/*********************************************************************/ - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 DDR2 configuration registers, offset 0x000 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - - typedef struct { - uint32_t memcStatus; - uint32_t memcCmd; - uint32_t directCmd; - uint32_t memoryCfg; - uint32_t refreshPrd; - uint32_t casLatency; - uint32_t writeLatency; - uint32_t tMrd; - uint32_t tRas; - uint32_t tRc; - uint32_t tRcd; - uint32_t tRfc; - uint32_t tRp; - uint32_t tRrd; - uint32_t tWr; - uint32_t tWtr; - uint32_t tXp; - uint32_t tXsr; - uint32_t tEsr; - uint32_t memoryCfg2; - uint32_t memoryCfg3; - uint32_t tFaw; - } ddrcReg_CTLR_MEMC_REG_t; - -#define ddrcReg_CTLR_MEMC_REG_OFFSET 0x0000 -#define ddrcReg_CTLR_MEMC_REGP ((volatile ddrcReg_CTLR_MEMC_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK (0x3 << 12) -#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4 (0x0 << 12) -#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8 (0x3 << 12) - -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK (0x3 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0 (0x0 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1 (0x1 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2 (0x2 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4 (0x3 << 10) - -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK (0x3 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1 (0x0 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2 (0x1 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3 (0x2 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4 (0x3 << 7) - -#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK (0x7 << 4) -#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2 (0x5 << 4) - -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK (0x3 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16 (0x0 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32 (0x1 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64 (0x2 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128 (0x3 << 2) - -#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK (0x3 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG (0x0 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY (0x1 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED (0x2 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR (0x3 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMC_CMD_MASK (0x7 << 0) -#define ddrcReg_CTLR_MEMC_CMD_GO (0x0 << 0) -#define ddrcReg_CTLR_MEMC_CMD_SLEEP (0x1 << 0) -#define ddrcReg_CTLR_MEMC_CMD_WAKEUP (0x2 << 0) -#define ddrcReg_CTLR_MEMC_CMD_PAUSE (0x3 << 0) -#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE (0x4 << 0) -#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE (0x7 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT 20 -#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT) - -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL (0x0 << 18) -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH (0x1 << 18) -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG (0x2 << 18) -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP (0x3 << 18) - -#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT 16 -#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT) - -#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT 0 -#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK (0x3 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1 (0x0 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2 (0x1 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3 (0x2 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4 (0x3 << 21) - -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK (0x7 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0 (0x0 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1 (0x1 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2 (0x2 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3 (0x3 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4 (0x4 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5 (0x5 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6 (0x6 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7 (0x7 << 18) - -#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK (0x7 << 15) -#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4 (0x2 << 15) -#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8 (0x3 << 15) /* @note Not supported in PL341 */ - -#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE (0x1 << 13) - -#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT 7 -#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT) - -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK (0x7 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11 (0x0 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12 (0x1 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13 (0x2 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14 (0x3 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15 (0x4 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16 (0x5 << 3) - -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK (0x7 << 0) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9 (0x1 << 0) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10 (0x2 << 0) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11 (0x3 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_REFRESH_PRD_SHIFT 0 -#define ddrcReg_CTLR_REFRESH_PRD_MASK (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_CAS_LATENCY_SHIFT 1 -#define ddrcReg_CTLR_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT 0 -#define ddrcReg_CTLR_WRITE_LATENCY_MASK (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_MRD_SHIFT 0 -#define ddrcReg_CTLR_T_MRD_MASK (0x7f << ddrcReg_CTLR_T_MRD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RAS_SHIFT 0 -#define ddrcReg_CTLR_T_RAS_MASK (0x1f << ddrcReg_CTLR_T_RAS_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RC_SHIFT 0 -#define ddrcReg_CTLR_T_RC_MASK (0x1f << ddrcReg_CTLR_T_RC_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_RCD_SHIFT 0 -#define ddrcReg_CTLR_T_RCD_MASK (0x7 << ddrcReg_CTLR_T_RCD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_RFC_SHIFT 0 -#define ddrcReg_CTLR_T_RFC_MASK (0x7f << ddrcReg_CTLR_T_RFC_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_RP_SHIFT 0 -#define ddrcReg_CTLR_T_RP_MASK (0xf << ddrcReg_CTLR_T_RP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RRD_SHIFT 0 -#define ddrcReg_CTLR_T_RRD_MASK (0xf << ddrcReg_CTLR_T_RRD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_WR_SHIFT 0 -#define ddrcReg_CTLR_T_WR_MASK (0x7 << ddrcReg_CTLR_T_WR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_WTR_SHIFT 0 -#define ddrcReg_CTLR_T_WTR_MASK (0x7 << ddrcReg_CTLR_T_WTR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_XP_SHIFT 0 -#define ddrcReg_CTLR_T_XP_MASK (0xff << ddrcReg_CTLR_T_XP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_XSR_SHIFT 0 -#define ddrcReg_CTLR_T_XSR_MASK (0xff << ddrcReg_CTLR_T_XSR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_ESR_SHIFT 0 -#define ddrcReg_CTLR_T_ESR_MASK (0xff << ddrcReg_CTLR_T_ESR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK (0x3 << 6) -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS (0 << 6) -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS (1 << 6) -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS (2 << 6) - -#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK (0x3 << 4) -#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2 (0 << 4) -#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3 (3 << 4) - -#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW (0 << 3) -#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH (1 << 3) - -#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW (0 << 2) -#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH (1 << 2) - -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK (0x3 << 0) -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC (0 << 0) -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M (1 << 0) -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M (3 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT 0 -#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT 0 -#define ddrcReg_CTLR_T_FAW_PERIOD_MASK (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_CTLR_QOS_CNT 16 -#define ddrcReg_CTLR_QOS_MAX (ddrcReg_CTLR_QOS_CNT - 1) - - typedef struct { - uint32_t cfg[ddrcReg_CTLR_QOS_CNT]; - } ddrcReg_CTLR_QOS_REG_t; - -#define ddrcReg_CTLR_QOS_REG_OFFSET 0x100 -#define ddrcReg_CTLR_QOS_REGP ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT 2 -#define ddrcReg_CTLR_QOS_CFG_MAX_MASK (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT) - -#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT 1 -#define ddrcReg_CTLR_QOS_CFG_MIN_MASK (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT) - -#define ddrcReg_CTLR_QOS_CFG_ENABLE (1 << 0) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 Memory chip configuration registers, offset 0x200 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_CTLR_CHIP_CNT 4 -#define ddrcReg_CTLR_CHIP_MAX (ddrcReg_CTLR_CHIP_CNT - 1) - - typedef struct { - uint32_t cfg[ddrcReg_CTLR_CHIP_CNT]; - } ddrcReg_CTLR_CHIP_REG_t; - -#define ddrcReg_CTLR_CHIP_REG_OFFSET 0x200 -#define ddrcReg_CTLR_CHIP_REGP ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK (1 << 16) -#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL (0 << 16) -#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL (1 << 16) - -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT 8 -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT) - -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT 0 -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 User configuration registers, offset 0x300 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_CTLR_USER_OUTPUT_CNT 2 - - typedef struct { - uint32_t input; - uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT]; - uint32_t feature; - } ddrcReg_CTLR_USER_REG_t; - -#define ddrcReg_CTLR_USER_REG_OFFSET 0x300 -#define ddrcReg_CTLR_USER_REGP ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT 0 -#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT 0 -#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT) - -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT 1 -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE (1 << 2) -#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE (1 << 0) - -/*********************************************************************/ -/* Broadcom DDR23 PHY register definitions */ -/*********************************************************************/ - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* Broadcom DDR23 PHY Address and Control register definitions */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - - typedef struct { - uint32_t revision; - uint32_t pmCtl; - REG32_RSVD(0x0008, 0x0010); - uint32_t pllStatus; - uint32_t pllCfg; - uint32_t pllPreDiv; - uint32_t pllDiv; - uint32_t pllCtl1; - uint32_t pllCtl2; - uint32_t ssCtl; - uint32_t ssCfg; - uint32_t vdlStatic; - uint32_t vdlDynamic; - uint32_t padIdle; - uint32_t pvtComp; - uint32_t padDrive; - uint32_t clkRgltrCtl; - } ddrcReg_PHY_ADDR_CTL_REG_t; - -#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400 -#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) - -/* @todo These SS definitions are duplicates of ones below */ - -#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE 0x00000001 -#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK 0xFFFF0000 -#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT 16 -#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK 10 /* Higher the value, lower the SS modulation frequency */ -#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK 0x0000FFFF -#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT 0 - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET (1 << 31) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT 17 -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE (1 << 16) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG (1 << 7) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN (1 << 6) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE (1 << 5) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE (1 << 4) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET (1 << 3) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET (1 << 2) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB (1 << 26) -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN (1 << 25) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT 20 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT 4 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT 24 -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT 30 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT 27 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT 24 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT 22 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER (0x1 << 21) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT 19 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT 17 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT 15 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT 13 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT 10 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT 5 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT) - -/* ----------------------------------------------------- */ -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT 4 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT 2 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE (0x1 << 1) -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE (0x1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE (0x1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT 16 -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE (1 << 20) -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE (1 << 16) - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE (1 << 16) - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE (1u << 31) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE (1 << 8) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE (1 << 6) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE (1 << 5) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE (1 << 4) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE (1 << 2) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE (1 << 1) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE (1 << 30) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE (1 << 29) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE (1 << 28) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE (1 << 27) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE (1 << 26) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE (1 << 25) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE (1 << 24) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT 20 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT 16 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT 4 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B (1 << 4) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18 (1 << 3) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI (1 << 2) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV (1 << 1) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF (1 << 1) -#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF (1 << 0) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* Broadcom DDR23 PHY Byte Lane register definitions */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_CNT 2 -#define ddrcReg_PHY_BYTE_LANE_MAX (ddrcReg_CTLR_BYTE_LANE_CNT - 1) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT 8 - - typedef struct { - uint32_t revision; - uint32_t vdlCalibrate; - uint32_t vdlStatus; - REG32_RSVD(0x000c, 0x0010); - uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT]; - uint32_t readCtl; - uint32_t readStatus; - uint32_t readClear; - uint32_t padIdleCtl; - uint32_t padDriveCtl; - uint32_t padClkCtl; - uint32_t writeCtl; - uint32_t clkRegCtl; - } ddrcReg_PHY_BYTE_LANE_REG_t; - -/* There are 2 instances of the byte Lane registers, one for each byte lane. */ -#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET 0x0500 -#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET 0x0600 - -#define ddrcReg_PHY_BYTE_LANE_1_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET)) -#define ddrcReg_PHY_BYTE_LANE_2_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT 0 -#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE (1 << 4) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE (0 << 4) - -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST (1 << 0) - -/* ----------------------------------------------------- */ - -/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */ -/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */ -/* register. The fine rise and fall are no longer used, so add some definitions for just */ -/* the step setting to simplify things. */ - -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT 4 -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE (1 << 16) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT 12 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT 0 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P 0 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N 1 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN 2 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM 3 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P 4 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N 5 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN 6 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM 7 - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT 0 -#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE (1u << 31) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE (1 << 19) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE (1 << 18) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE (1 << 17) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE (1 << 16) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE (1 << 15) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE (1 << 14) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE (1 << 13) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE (1 << 12) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE (1 << 11) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE (1 << 10) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE (1 << 9) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE (1 << 8) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE (1 << 7) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE (1 << 6) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE (1 << 5) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE (1 << 4) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB (1 << 5) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B (1 << 4) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18 (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3 (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF (1 << 0) - -/*********************************************************************/ -/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */ -/*********************************************************************/ - - typedef struct { - uint32_t cfg; - uint32_t actMonCnt; - uint32_t ctl; - uint32_t lbistCtl; - uint32_t lbistSeed; - uint32_t lbistStatus; - uint32_t tieOff; - uint32_t actMonClear; - uint32_t status; - uint32_t user; - } ddrcReg_CTLR_PHY_GLUE_REG_t; - -#define ddrcReg_CTLR_PHY_GLUE_OFFSET 0x0700 -#define ddrcReg_CTLR_PHY_GLUE_REGP ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET)) - -/* ----------------------------------------------------- */ - -/* DDR2 / AXI block phase alignment interrupt control */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT 18 -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT 17 -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT 16 -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW - -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT 15 -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 - -/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */ -/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */ -/* controller. If 2 chips selects are being used, then software control must be enabled. */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD (1 << 14) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE (1 << 13) - -/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10) - -/* Chip select count */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT 9 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT 8 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT 7 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT 6 -#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT 0 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT) - -/* ----------------------------------------------------- */ -#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT 0 -#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT) - -/* ---- Public Function Prototypes --------------------------------------- */ - -#ifdef __cplusplus -} /* end extern "C" */ -#endif -#endif /* DDRC_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h deleted file mode 100644 index d67e2f8c22de..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ /dev/null @@ -1,145 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw_priv.h -* -* @brief Private Definitions for low level DMA driver -* -*/ -/****************************************************************************/ - -#ifndef _DMACHW_PRIV_H -#define _DMACHW_PRIV_H - -#include - -/* Data type for DMA Link List Item */ -typedef struct { - uint32_t sar; /* Source Address Register. - Address must be aligned to CTLx.SRC_TR_WIDTH. */ - uint32_t dar; /* Destination Address Register. - Address must be aligned to CTLx.DST_TR_WIDTH. */ - uint32_t llpPhy; /* LLP contains the physical address of the next descriptor for block chaining using linked lists. - Address MUST be aligned to a 32-bit boundary. */ - dmacHw_REG64_t ctl; /* Control Register. 64 bits */ - uint32_t sstat; /* Source Status Register */ - uint32_t dstat; /* Destination Status Register */ - uint32_t devCtl; /* Device specific control information */ - uint32_t llp; /* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */ -} dmacHw_DESC_t; - -/* - * Descriptor ring pointers - */ -typedef struct { - int num; /* Number of link items */ - dmacHw_DESC_t *pHead; /* Head of descriptor ring (for writing) */ - dmacHw_DESC_t *pTail; /* Tail of descriptor ring (for reading) */ - dmacHw_DESC_t *pProg; /* Descriptor to program the channel (for programming the channel register) */ - dmacHw_DESC_t *pEnd; /* End of current descriptor chain */ - dmacHw_DESC_t *pFree; /* Descriptor to free memory (freeing dynamic memory) */ - uint32_t virt2PhyOffset; /* Virtual to physical address offset for the descriptor ring */ -} dmacHw_DESC_RING_t; - -/* - * DMA channel control block - */ -typedef struct { - uint32_t module; /* DMA controller module (0-1) */ - uint32_t channel; /* DMA channel (0-7) */ - volatile uint32_t varDataStarted; /* Flag indicating variable data channel is enabled */ - volatile uint32_t descUpdated; /* Flag to indicate descriptor update is complete */ - void *userData; /* Channel specifc user data */ -} dmacHw_CBLK_t; - -#define dmacHw_ASSERT(a) if (!(a)) while (1) -#define dmacHw_MAX_CHANNEL_COUNT 16 -#define dmacHw_FREE_USER_MEMORY 0xFFFFFFFF -#define dmacHw_DESC_FREE dmacHw_REG_CTL_DONE -#define dmacHw_DESC_INIT ((dmacHw_DESC_t *) 0xFFFFFFFF) -#define dmacHw_MAX_BLOCKSIZE 4064 -#define dmacHw_GET_DESC_RING(addr) (dmacHw_DESC_RING_t *)(addr) -#define dmacHw_ADDRESS_MASK(byte) ((byte) - 1) -#define dmacHw_NEXT_DESC(rp, dp) ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp) -#define dmacHw_HANDLE_TO_CBLK(handle) ((dmacHw_CBLK_t *) (handle)) -#define dmacHw_CBLK_TO_HANDLE(cblkp) ((dmacHw_HANDLE_t) (cblkp)) -#define dmacHw_DST_IS_MEMORY(tt) (((tt) == dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0 - -/****************************************************************************/ -/** -* @brief Get next available transaction width -* -* -* @return On success : Next available transaction width -* On failure : dmacHw_TRANSACTION_WIDTH_8 -* -* @note -* None -*/ -/****************************************************************************/ -static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Current transaction width */ - ) { - if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) { - return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) - - 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT; - } else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) { - return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) - - 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT; - } - - /* Default return */ - return dmacHw_SRC_TRANSACTION_WIDTH_8; -} - -/****************************************************************************/ -/** -* @brief Get number of bytes per transaction -* -* @return Number of bytes per transaction -* -* -* @note -* None -*/ -/****************************************************************************/ -static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Transaction width */ - ) { - int width = 1; - switch (tw) { - case dmacHw_SRC_TRANSACTION_WIDTH_8: - width = 1; - break; - case dmacHw_SRC_TRANSACTION_WIDTH_16: - case dmacHw_DST_TRANSACTION_WIDTH_16: - width = 2; - break; - case dmacHw_SRC_TRANSACTION_WIDTH_32: - case dmacHw_DST_TRANSACTION_WIDTH_32: - width = 4; - break; - case dmacHw_SRC_TRANSACTION_WIDTH_64: - case dmacHw_DST_TRANSACTION_WIDTH_64: - width = 8; - break; - default: - dmacHw_ASSERT(0); - } - - /* Default transaction width */ - return width; -} - -#endif /* _DMACHW_PRIV_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h deleted file mode 100644 index f1ecf96f2da5..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h +++ /dev/null @@ -1,406 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw_reg.h -* -* @brief Definitions for low level DMA registers -* -*/ -/****************************************************************************/ - -#ifndef _DMACHW_REG_H -#define _DMACHW_REG_H - -#include -#include - -/* Data type for 64 bit little endian register */ -typedef struct { - volatile uint32_t lo; /* Lower 32 bit in little endian mode */ - volatile uint32_t hi; /* Upper 32 bit in little endian mode */ -} dmacHw_REG64_t; - -/* Data type representing DMA channel registers */ -typedef struct { - dmacHw_REG64_t ChannelSar; /* Source Address Register. 64 bits (upper 32 bits are reserved) - Address must be aligned to CTLx.SRC_TR_WIDTH. - */ - dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved) - Address must be aligned to CTLx.DST_TR_WIDTH. - */ - dmacHw_REG64_t ChannelLlp; /* Link List Pointer.64 bits (upper 32 bits are reserved) - LLP contains the pointer to the next LLI for block chaining using linked lists. - If LLPis set to 0x0, then transfers using linked lists are not enabled. - Address MUST be aligned to a 32-bit boundary. - */ - dmacHw_REG64_t ChannelCtl; /* Control Register. 64 bits */ - dmacHw_REG64_t ChannelSstat; /* Source Status Register */ - dmacHw_REG64_t ChannelDstat; /* Destination Status Register */ - dmacHw_REG64_t ChannelSstatAddr; /* Source Status Address Register */ - dmacHw_REG64_t ChannelDstatAddr; /* Destination Status Address Register */ - dmacHw_REG64_t ChannelConfig; /* Channel Configuration Register */ - dmacHw_REG64_t SrcGather; /* Source gather register */ - dmacHw_REG64_t DstScatter; /* Destination scatter register */ -} dmacHw_CH_REG_t; - -/* Data type for RAW interrupt status registers */ -typedef struct { - dmacHw_REG64_t RawTfr; /* Raw Status for IntTfr Interrupt */ - dmacHw_REG64_t RawBlock; /* Raw Status for IntBlock Interrupt */ - dmacHw_REG64_t RawSrcTran; /* Raw Status for IntSrcTran Interrupt */ - dmacHw_REG64_t RawDstTran; /* Raw Status for IntDstTran Interrupt */ - dmacHw_REG64_t RawErr; /* Raw Status for IntErr Interrupt */ -} dmacHw_INT_RAW_t; - -/* Data type for interrupt status registers */ -typedef struct { - dmacHw_REG64_t StatusTfr; /* Status for IntTfr Interrupt */ - dmacHw_REG64_t StatusBlock; /* Status for IntBlock Interrupt */ - dmacHw_REG64_t StatusSrcTran; /* Status for IntSrcTran Interrupt */ - dmacHw_REG64_t StatusDstTran; /* Status for IntDstTran Interrupt */ - dmacHw_REG64_t StatusErr; /* Status for IntErr Interrupt */ -} dmacHw_INT_STATUS_t; - -/* Data type for interrupt mask registers*/ -typedef struct { - dmacHw_REG64_t MaskTfr; /* Mask for IntTfr Interrupt */ - dmacHw_REG64_t MaskBlock; /* Mask for IntBlock Interrupt */ - dmacHw_REG64_t MaskSrcTran; /* Mask for IntSrcTran Interrupt */ - dmacHw_REG64_t MaskDstTran; /* Mask for IntDstTran Interrupt */ - dmacHw_REG64_t MaskErr; /* Mask for IntErr Interrupt */ -} dmacHw_INT_MASK_t; - -/* Data type for interrupt clear registers */ -typedef struct { - dmacHw_REG64_t ClearTfr; /* Clear for IntTfr Interrupt */ - dmacHw_REG64_t ClearBlock; /* Clear for IntBlock Interrupt */ - dmacHw_REG64_t ClearSrcTran; /* Clear for IntSrcTran Interrupt */ - dmacHw_REG64_t ClearDstTran; /* Clear for IntDstTran Interrupt */ - dmacHw_REG64_t ClearErr; /* Clear for IntErr Interrupt */ - dmacHw_REG64_t StatusInt; /* Status for each interrupt type */ -} dmacHw_INT_CLEAR_t; - -/* Data type for software handshaking registers */ -typedef struct { - dmacHw_REG64_t ReqSrcReg; /* Source Software Transaction Request Register */ - dmacHw_REG64_t ReqDstReg; /* Destination Software Transaction Request Register */ - dmacHw_REG64_t SglReqSrcReg; /* Single Source Transaction Request Register */ - dmacHw_REG64_t SglReqDstReg; /* Single Destination Transaction Request Register */ - dmacHw_REG64_t LstSrcReg; /* Last Source Transaction Request Register */ - dmacHw_REG64_t LstDstReg; /* Last Destination Transaction Request Register */ -} dmacHw_SW_HANDSHAKE_t; - -/* Data type for misc. registers */ -typedef struct { - dmacHw_REG64_t DmaCfgReg; /* DMA Configuration Register */ - dmacHw_REG64_t ChEnReg; /* DMA Channel Enable Register */ - dmacHw_REG64_t DmaIdReg; /* DMA ID Register */ - dmacHw_REG64_t DmaTestReg; /* DMA Test Register */ - dmacHw_REG64_t Reserved0; /* Reserved */ - dmacHw_REG64_t Reserved1; /* Reserved */ - dmacHw_REG64_t CompParm6; /* Component Parameter 6 */ - dmacHw_REG64_t CompParm5; /* Component Parameter 5 */ - dmacHw_REG64_t CompParm4; /* Component Parameter 4 */ - dmacHw_REG64_t CompParm3; /* Component Parameter 3 */ - dmacHw_REG64_t CompParm2; /* Component Parameter 2 */ - dmacHw_REG64_t CompParm1; /* Component Parameter 1 */ - dmacHw_REG64_t CompId; /* Compoent ID */ -} dmacHw_MISC_t; - -/* Base registers */ -#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ -#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ - -extern uint32_t dmaChannelCount_0; -extern uint32_t dmaChannelCount_1; - -/* Define channel specific registers */ -#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) - -/* Raw interrupt status registers */ -#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) -#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) -#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) -#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) -#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) -#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) - -/* Interrupt status registers */ -#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) -#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) -#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) -#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) -#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) -#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) - -/* Interrupt status registers */ -#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) -#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) -#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) -#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) -#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) -#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) - -/* Interrupt clear registers */ -#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) -#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) -#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) -#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) -#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) -#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) -#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) - -/* Software handshaking registers */ -#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) -#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) - -/* Miscellaneous registers */ -#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) -#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) -#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) -#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) -#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) -#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) -#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) -#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) -#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) -#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) -#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) -#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) -#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) -#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) -#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) - -/* Channel control registers */ -#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo) -#define dmacHw_REG_DAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo) -#define dmacHw_REG_LLP(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo) - -#define dmacHw_REG_CTL_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo) -#define dmacHw_REG_CTL_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi) - -#define dmacHw_REG_SSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo) -#define dmacHw_REG_DSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo) -#define dmacHw_REG_SSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo) -#define dmacHw_REG_DSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo) - -#define dmacHw_REG_CFG_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo) -#define dmacHw_REG_CFG_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi) - -#define dmacHw_REG_SGR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo) -#define dmacHw_REG_SGR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi) - -#define dmacHw_REG_DSR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo) -#define dmacHw_REG_DSR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi) - -#define INT_STATUS_MASK(channel) (0x00000001 << (channel)) -#define CHANNEL_BUSY(mod, channel) (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel))) - -/* Bit mask for REG_DMACx_CTL_LO */ - -#define dmacHw_REG_CTL_INT_EN 0x00000001 /* Channel interrupt enable */ - -#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK 0x0000000E /* Destination transaction width mask */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT 1 -#define dmacHw_REG_CTL_DST_TR_WIDTH_8 0x00000000 /* Destination transaction width 8 bit */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_16 0x00000002 /* Destination transaction width 16 bit */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_32 0x00000004 /* Destination transaction width 32 bit */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_64 0x00000006 /* Destination transaction width 64 bit */ - -#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK 0x00000070 /* Source transaction width mask */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT 4 -#define dmacHw_REG_CTL_SRC_TR_WIDTH_8 0x00000000 /* Source transaction width 8 bit */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_16 0x00000010 /* Source transaction width 16 bit */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_32 0x00000020 /* Source transaction width 32 bit */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_64 0x00000030 /* Source transaction width 64 bit */ - -#define dmacHw_REG_CTL_DS_ENABLE 0x00040000 /* Destination scatter enable */ -#define dmacHw_REG_CTL_SG_ENABLE 0x00020000 /* Source gather enable */ - -#define dmacHw_REG_CTL_DINC_MASK 0x00000180 /* Destination address inc/dec mask */ -#define dmacHw_REG_CTL_DINC_INC 0x00000000 /* Destination address increment */ -#define dmacHw_REG_CTL_DINC_DEC 0x00000080 /* Destination address decrement */ -#define dmacHw_REG_CTL_DINC_NC 0x00000100 /* Destination address no change */ - -#define dmacHw_REG_CTL_SINC_MASK 0x00000600 /* Source address inc/dec mask */ -#define dmacHw_REG_CTL_SINC_INC 0x00000000 /* Source address increment */ -#define dmacHw_REG_CTL_SINC_DEC 0x00000200 /* Source address decrement */ -#define dmacHw_REG_CTL_SINC_NC 0x00000400 /* Source address no change */ - -#define dmacHw_REG_CTL_DST_MSIZE_MASK 0x00003800 /* Destination burst transaction length */ -#define dmacHw_REG_CTL_DST_MSIZE_0 0x00000000 /* No Destination burst */ -#define dmacHw_REG_CTL_DST_MSIZE_4 0x00000800 /* Destination burst transaction length 4 */ -#define dmacHw_REG_CTL_DST_MSIZE_8 0x00001000 /* Destination burst transaction length 8 */ -#define dmacHw_REG_CTL_DST_MSIZE_16 0x00001800 /* Destination burst transaction length 16 */ - -#define dmacHw_REG_CTL_SRC_MSIZE_MASK 0x0001C000 /* Source burst transaction length */ -#define dmacHw_REG_CTL_SRC_MSIZE_0 0x00000000 /* No Source burst */ -#define dmacHw_REG_CTL_SRC_MSIZE_4 0x00004000 /* Source burst transaction length 4 */ -#define dmacHw_REG_CTL_SRC_MSIZE_8 0x00008000 /* Source burst transaction length 8 */ -#define dmacHw_REG_CTL_SRC_MSIZE_16 0x0000C000 /* Source burst transaction length 16 */ - -#define dmacHw_REG_CTL_TTFC_MASK 0x00700000 /* Transfer type and flow controller */ -#define dmacHw_REG_CTL_TTFC_MM_DMAC 0x00000000 /* Memory to Memory with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_MP_DMAC 0x00100000 /* Memory to Peripheral with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_PM_DMAC 0x00200000 /* Peripheral to Memory with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_PP_DMAC 0x00300000 /* Peripheral to Peripheral with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_PM_PERI 0x00400000 /* Peripheral to Memory with Peripheral as flow controller */ -#define dmacHw_REG_CTL_TTFC_PP_SPERI 0x00500000 /* Peripheral to Peripheral with Source Peripheral as flow controller */ -#define dmacHw_REG_CTL_TTFC_MP_PERI 0x00600000 /* Memory to Peripheral with Peripheral as flow controller */ -#define dmacHw_REG_CTL_TTFC_PP_DPERI 0x00700000 /* Peripheral to Peripheral with Destination Peripheral as flow controller */ - -#define dmacHw_REG_CTL_DMS_MASK 0x01800000 /* Destination AHB master interface */ -#define dmacHw_REG_CTL_DMS_1 0x00000000 /* Destination AHB master interface 1 */ -#define dmacHw_REG_CTL_DMS_2 0x00800000 /* Destination AHB master interface 2 */ - -#define dmacHw_REG_CTL_SMS_MASK 0x06000000 /* Source AHB master interface */ -#define dmacHw_REG_CTL_SMS_1 0x00000000 /* Source AHB master interface 1 */ -#define dmacHw_REG_CTL_SMS_2 0x02000000 /* Source AHB master interface 2 */ - -#define dmacHw_REG_CTL_LLP_DST_EN 0x08000000 /* Block chaining enable for destination side */ -#define dmacHw_REG_CTL_LLP_SRC_EN 0x10000000 /* Block chaining enable for source side */ - -/* Bit mask for REG_DMACx_CTL_HI */ -#define dmacHw_REG_CTL_BLOCK_TS_MASK 0x00000FFF /* Block transfer size */ -#define dmacHw_REG_CTL_DONE 0x00001000 /* Block trasnfer done */ - -/* Bit mask for REG_DMACx_CFG_LO */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT 5 /* Channel priority shift */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK 0x000000E0 /* Channel priority mask */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_0 0x00000000 /* Channel priority 0 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_1 0x00000020 /* Channel priority 1 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_2 0x00000040 /* Channel priority 2 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_3 0x00000060 /* Channel priority 3 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_4 0x00000080 /* Channel priority 4 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_5 0x000000A0 /* Channel priority 5 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_6 0x000000C0 /* Channel priority 6 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_7 0x000000E0 /* Channel priority 7 */ - -#define dmacHw_REG_CFG_LO_CH_SUSPEND 0x00000100 /* Channel suspend */ -#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY 0x00000200 /* Channel FIFO empty */ -#define dmacHw_REG_CFG_LO_DST_CH_SW_HS 0x00000400 /* Destination channel SW handshaking */ -#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS 0x00000800 /* Source channel SW handshaking */ - -#define dmacHw_REG_CFG_LO_CH_LOCK_MASK 0x00003000 /* Channel locking mask */ -#define dmacHw_REG_CFG_LO_CH_LOCK_DMA 0x00000000 /* Channel lock over the entire DMA transfer operation */ -#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK 0x00001000 /* Channel lock over the block transfer operation */ -#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS 0x00002000 /* Channel lock over the transaction */ -#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE 0x00010000 /* Channel lock enable */ - -#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK 0x0000C000 /* Bus locking mask */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA 0x00000000 /* Bus lock over the entire DMA transfer operation */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK 0x00004000 /* Bus lock over the block transfer operation */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS 0x00008000 /* Bus lock over the transaction */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE 0x00020000 /* Bus lock enable */ - -#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW 0x00040000 /* Destination channel handshaking signal polarity low */ -#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW 0x00080000 /* Source channel handshaking signal polarity low */ - -#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK 0x3FF00000 /* Maximum AMBA burst length */ - -#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC 0x40000000 /* Source address auto reload */ -#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST 0x80000000 /* Destination address auto reload */ - -/* Bit mask for REG_DMACx_CFG_HI */ -#define dmacHw_REG_CFG_HI_FC_DST_READY 0x00000001 /* Source transaction request is serviced when destination is ready */ -#define dmacHw_REG_CFG_HI_FIFO_ENOUGH 0x00000002 /* Initiate burst transaction when enough data in available in FIFO */ - -#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK 0x0000001C /* AHB protection mask */ -#define dmacHw_REG_CFG_HI_AHB_HPROT_1 0x00000004 /* AHB protection 1 */ -#define dmacHw_REG_CFG_HI_AHB_HPROT_2 0x00000008 /* AHB protection 2 */ -#define dmacHw_REG_CFG_HI_AHB_HPROT_3 0x00000010 /* AHB protection 3 */ - -#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT 0x00000020 /* Destination status update enable */ -#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT 0x00000040 /* Source status update enable */ - -#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK 0x00000780 /* Source peripheral hardware interface mask */ -#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK 0x00007800 /* Destination peripheral hardware interface mask */ - -/* DMA Configuration Parameters */ -#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS 0x00000700 /* Number of channels */ -#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE 0x00001800 /* Number of master interface */ -#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE 0x0000000f /* Maximum brust size */ -#define dmacHw_REG_COMP_PARAM_DATA_WIDTH 0x00006000 /* Data transfer width */ - -/* Define GET/SET macros to program the registers */ -#define dmacHw_SET_SAR(module, channel, addr) (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr)) -#define dmacHw_SET_DAR(module, channel, addr) (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr)) -#define dmacHw_SET_LLP(module, channel, ptr) (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr)) - -#define dmacHw_GET_SSTAT(module, channel) (dmacHw_REG_SSTAT((module), (channel))) -#define dmacHw_GET_DSTAT(module, channel) (dmacHw_REG_DSTAT((module), (channel))) - -#define dmacHw_SET_SSTATAR(module, channel, addr) (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr)) -#define dmacHw_SET_DSTATAR(module, channel, addr) (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr)) - -#define dmacHw_SET_CONTROL_LO(module, channel, ctl) (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl)) -#define dmacHw_RESET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)) = 0) -#define dmacHw_GET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel))) - -#define dmacHw_SET_CONTROL_HI(module, channel, ctl) (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl)) -#define dmacHw_RESET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) = 0) -#define dmacHw_GET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel))) - -#define dmacHw_GET_BLOCK_SIZE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK) -#define dmacHw_DMA_COMPLETE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE) - -#define dmacHw_SET_CONFIG_LO(module, channel, cfg) (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg)) -#define dmacHw_RESET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)) = 0) -#define dmacHw_GET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel))) -#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) -#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio)) -#define dmacHw_SET_AHB_HPROT(module, channel, protect) (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect)) - -#define dmacHw_SET_CONFIG_HI(module, channel, cfg) (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg)) -#define dmacHw_RESET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)) = 0) -#define dmacHw_GET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel))) -#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) -#define dmacHw_SRC_PERI_INTF(intf) (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK) -#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) -#define dmacHw_DST_PERI_INTF(intf) (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK) - -#define dmacHw_DMA_START(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) -#define dmacHw_DMA_STOP(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_DMA_ENABLE(module) (dmacHw_REG_MISC_CFG((module)) = 1) -#define dmacHw_DMA_DISABLE(module) (dmacHw_REG_MISC_CFG((module)) = 0) - -#define dmacHw_TRAN_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) -#define dmacHw_BLOCK_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) -#define dmacHw_ERROR_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) - -#define dmacHw_TRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_BLOCK_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_ERROR_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_STRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_DTRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8))) - -#define dmacHw_TRAN_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel))) -#define dmacHw_BLOCK_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel))) -#define dmacHw_ERROR_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel))) - -#define dmacHw_GET_NUM_CHANNEL(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1) -#define dmacHw_GET_NUM_INTERFACE(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1) -#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE) -#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13) - -#endif /* _DMACHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h deleted file mode 100644 index cfa91bed9d34..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h +++ /dev/null @@ -1,73 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_HW_CFG_H -#define CSP_HW_CFG_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#if defined(__KERNEL__) -#include -#else -#include -#endif - -/* Some items that can be defined externally, but will be set to default values */ -/* if they are not defined. */ -/* HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE Default undefined and SS is enabled. */ -/* HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */ -/* HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */ -/* HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */ -/* HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */ -/* HW_CFG_SDRAM_ADDR_BRC Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */ -/* HW_CFG_SDRAM_CLK_ASYNC Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */ - -#if defined(CFG_GLOBAL_CHIP) - #if (CFG_GLOBAL_CHIP == FPGA11107) - #define HW_CFG_BUS_CLK_HZ 5000000 - #define HW_CFG_DDR_CTLR_CLK_HZ 10000000 - #define HW_CFG_DDR_PHY_OMIT - #define HW_CFG_UART_CLK_HZ 7500000 - #else - #define HW_CFG_PLL_VCO_HZ 2000000000 - #define HW_CFG_PLL2_VCO_HZ 1800000000 - #define HW_CFG_ARM_CLK_HZ CAP_HW_CFG_ARM_CLK_HZ - #define HW_CFG_BUS_CLK_HZ 166666666 - #define HW_CFG_DDR_CTLR_CLK_HZ 333333333 - #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ) - #define HW_CFG_UART_CLK_HZ 142857142 - #define HW_CFG_VPM_CLK_HZ CAP_HW_CFG_VPM_CLK_HZ - #endif -#else - #define HW_CFG_PLL_VCO_HZ 1800000000 - #define HW_CFG_PLL2_VCO_HZ 1800000000 - #define HW_CFG_ARM_CLK_HZ 450000000 - #define HW_CFG_BUS_CLK_HZ 150000000 - #define HW_CFG_DDR_CTLR_CLK_HZ 300000000 - #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ) - #define HW_CFG_UART_CLK_HZ 150000000 - #define HW_CFG_VPM_CLK_HZ 300000000 -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_HW_CFG_H */ - diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h deleted file mode 100644 index 0aeb6a6fe7f8..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ /dev/null @@ -1,246 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file intcHw_reg.h -* -* @brief platform specific interrupt controller bit assignments -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _INTCHW_REG_H -#define _INTCHW_REG_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include -#include - -/* ---- Public Constants and Types --------------------------------------- */ - -#define INTCHW_NUM_IRQ_PER_INTC 32 /* Maximum number of interrupt controllers */ -#define INTCHW_NUM_INTC 3 - -/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */ -#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0) -#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1) -#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC) - -/* INTC0 - interrupt controller 0 */ -#define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */ -#define INTCHW_INTC0_CLCD_BITNUM 30 /* LCD Controller interrupt */ -#define INTCHW_INTC0_GE_BITNUM 29 /* Graphic engine interrupt */ -#define INTCHW_INTC0_APM_BITNUM 28 /* Audio process module interrupt */ -#define INTCHW_INTC0_ESW_BITNUM 27 /* Ethernet switch interrupt */ -#define INTCHW_INTC0_SPIH_BITNUM 26 /* SPI host interrupt */ -#define INTCHW_INTC0_TIMER3_BITNUM 25 /* Timer3 interrupt */ -#define INTCHW_INTC0_TIMER2_BITNUM 24 /* Timer2 interrupt */ -#define INTCHW_INTC0_TIMER1_BITNUM 23 /* Timer1 interrupt */ -#define INTCHW_INTC0_TIMER0_BITNUM 22 /* Timer0 interrupt */ -#define INTCHW_INTC0_SDIOH1_BITNUM 21 /* SDIO1 host interrupt */ -#define INTCHW_INTC0_SDIOH0_BITNUM 20 /* SDIO0 host interrupt */ -#define INTCHW_INTC0_USBD_BITNUM 19 /* USB device interrupt */ -#define INTCHW_INTC0_USBH1_BITNUM 18 /* USB1 host interrupt */ -#define INTCHW_INTC0_USBHD2_BITNUM 17 /* USB host2/device2 interrupt */ -#define INTCHW_INTC0_VPM_BITNUM 16 /* Voice process module interrupt */ -#define INTCHW_INTC0_DMA1C7_BITNUM 15 /* DMA1 channel 7 interrupt */ -#define INTCHW_INTC0_DMA1C6_BITNUM 14 /* DMA1 channel 6 interrupt */ -#define INTCHW_INTC0_DMA1C5_BITNUM 13 /* DMA1 channel 5 interrupt */ -#define INTCHW_INTC0_DMA1C4_BITNUM 12 /* DMA1 channel 4 interrupt */ -#define INTCHW_INTC0_DMA1C3_BITNUM 11 /* DMA1 channel 3 interrupt */ -#define INTCHW_INTC0_DMA1C2_BITNUM 10 /* DMA1 channel 2 interrupt */ -#define INTCHW_INTC0_DMA1C1_BITNUM 9 /* DMA1 channel 1 interrupt */ -#define INTCHW_INTC0_DMA1C0_BITNUM 8 /* DMA1 channel 0 interrupt */ -#define INTCHW_INTC0_DMA0C7_BITNUM 7 /* DMA0 channel 7 interrupt */ -#define INTCHW_INTC0_DMA0C6_BITNUM 6 /* DMA0 channel 6 interrupt */ -#define INTCHW_INTC0_DMA0C5_BITNUM 5 /* DMA0 channel 5 interrupt */ -#define INTCHW_INTC0_DMA0C4_BITNUM 4 /* DMA0 channel 4 interrupt */ -#define INTCHW_INTC0_DMA0C3_BITNUM 3 /* DMA0 channel 3 interrupt */ -#define INTCHW_INTC0_DMA0C2_BITNUM 2 /* DMA0 channel 2 interrupt */ -#define INTCHW_INTC0_DMA0C1_BITNUM 1 /* DMA0 channel 1 interrupt */ -#define INTCHW_INTC0_DMA0C0_BITNUM 0 /* DMA0 channel 0 interrupt */ - -#define INTCHW_INTC0_PIF (1< -#endif - -/* ---- Public Constants and Types --------------------------------------- */ - -/* Memory Map address definitions */ - -#define MM_ADDR_DDR 0x00000000 - -#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000 /* 16 MB - Reserved external memory for VPM use */ - -#define MM_ADDR_IO_FLASHC 0x20000000 -#define MM_ADDR_IO_BROM 0x30000000 -#define MM_ADDR_IO_ARAM 0x30100000 /* 64 KB - extra cycle latency - WS switch */ -#define MM_ADDR_IO_DMA0 0x30200000 -#define MM_ADDR_IO_DMA1 0x30300000 -#define MM_ADDR_IO_ESW 0x30400000 -#define MM_ADDR_IO_CLCD 0x30500000 -#define MM_ADDR_IO_PIF 0x30580000 -#define MM_ADDR_IO_APM 0x30600000 -#define MM_ADDR_IO_SPUM 0x30700000 -#define MM_ADDR_IO_VPM_PROG 0x30800000 -#define MM_ADDR_IO_VPM_DATA 0x30A00000 -#define MM_ADDR_IO_VRAM 0x40000000 /* 64 KB - security block in front of it */ -#define MM_ADDR_IO_CHIPC 0x80000000 -#define MM_ADDR_IO_UMI 0x80001000 -#define MM_ADDR_IO_NAND 0x80001800 -#define MM_ADDR_IO_LEDM 0x80002000 -#define MM_ADDR_IO_PWM 0x80002040 -#define MM_ADDR_IO_VINTC 0x80003000 -#define MM_ADDR_IO_GPIO0 0x80004000 -#define MM_ADDR_IO_GPIO1 0x80004800 -#define MM_ADDR_IO_I2CS 0x80005000 -#define MM_ADDR_IO_SPIS 0x80006000 -#define MM_ADDR_IO_HPM 0x80007400 -#define MM_ADDR_IO_HPM_REMAP 0x80007800 -#define MM_ADDR_IO_TZPC 0x80008000 -#define MM_ADDR_IO_MPU 0x80009000 -#define MM_ADDR_IO_SPUMP 0x8000a000 -#define MM_ADDR_IO_PKA 0x8000b000 -#define MM_ADDR_IO_RNG 0x8000c000 -#define MM_ADDR_IO_KEYC 0x8000d000 -#define MM_ADDR_IO_BBL 0x8000e000 -#define MM_ADDR_IO_OTP 0x8000f000 -#define MM_ADDR_IO_I2S0 0x80010000 -#define MM_ADDR_IO_I2S1 0x80011000 -#define MM_ADDR_IO_UARTA 0x80012000 -#define MM_ADDR_IO_UARTB 0x80013000 -#define MM_ADDR_IO_I2CH 0x80014020 -#define MM_ADDR_IO_SPIH 0x80015000 -#define MM_ADDR_IO_TSC 0x80016000 -#define MM_ADDR_IO_TMR 0x80017000 -#define MM_ADDR_IO_WATCHDOG 0x80017800 -#define MM_ADDR_IO_ETM 0x80018000 -#define MM_ADDR_IO_DDRC 0x80019000 -#define MM_ADDR_IO_SINTC 0x80100000 -#define MM_ADDR_IO_INTC0 0x80200000 -#define MM_ADDR_IO_INTC1 0x80201000 -#define MM_ADDR_IO_GE 0x80300000 -#define MM_ADDR_IO_USB_CTLR0 0x80400000 -#define MM_ADDR_IO_USB_CTLR1 0x80410000 -#define MM_ADDR_IO_USB_PHY 0x80420000 -#define MM_ADDR_IO_SDIOH0 0x80500000 -#define MM_ADDR_IO_SDIOH1 0x80600000 -#define MM_ADDR_IO_VDEC 0x80700000 - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* _MM_ADDR_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h deleted file mode 100644 index de92ec6a01aa..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h +++ /dev/null @@ -1,147 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file mm_io.h -* -* @brief Memory Map I/O definitions -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _MM_IO_H -#define _MM_IO_H - -/* ---- Include Files ---------------------------------------------------- */ -#include - -#if !defined(CSP_SIMULATION) -#include -#endif - -/* ---- Public Constants and Types --------------------------------------- */ - -#if defined(CONFIG_MMU) - -/* This macro is referenced in - * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx - * This macro is referenced in - * - * Assume VPM address is the last x MB of memory. For VPM, map to - * 0xf0000000 and up. - */ - -#ifndef MM_IO_PHYS_TO_VIRT -#ifdef __ASSEMBLY__ -#define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)) -#else -#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ - (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))) -#endif -#endif - -/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */ - -#ifndef MM_IO_VIRT_TO_PHYS -#ifdef __ASSEMBLY__ -#define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)) -#else -#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ - ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))) -#endif -#endif - -#else - -#ifndef MM_IO_PHYS_TO_VIRT -#define MM_IO_PHYS_TO_VIRT(phys) (phys) -#endif - -#ifndef MM_IO_VIRT_TO_PHYS -#define MM_IO_VIRT_TO_PHYS(virt) (virt) -#endif - -#endif - -/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */ -#define MM_IO_BASE_FLASHC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC) -#define MM_IO_BASE_NAND MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND) -#define MM_IO_BASE_UMI MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI) - -#define MM_IO_START MM_ADDR_IO_FLASHC /* Physical beginning of IO mapped memory */ -#define MM_IO_BASE MM_IO_BASE_FLASHC /* Virtual beginning of IO mapped memory */ - -#define MM_IO_BASE_BROM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM) -#define MM_IO_BASE_ARAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM) -#define MM_IO_BASE_DMA0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0) -#define MM_IO_BASE_DMA1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1) -#define MM_IO_BASE_ESW MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW) -#define MM_IO_BASE_CLCD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD) -#define MM_IO_BASE_PIF MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF) -#define MM_IO_BASE_APM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM) -#define MM_IO_BASE_SPUM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM) -#define MM_IO_BASE_VPM_PROG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG) -#define MM_IO_BASE_VPM_DATA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA) - -#define MM_IO_BASE_VRAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM) - -#define MM_IO_BASE_CHIPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC) -#define MM_IO_BASE_DDRC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC) -#define MM_IO_BASE_LEDM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM) -#define MM_IO_BASE_PWM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM) -#define MM_IO_BASE_VINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC) -#define MM_IO_BASE_GPIO0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0) -#define MM_IO_BASE_GPIO1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1) -#define MM_IO_BASE_TMR MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR) -#define MM_IO_BASE_WATCHDOG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG) -#define MM_IO_BASE_ETM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM) -#define MM_IO_BASE_HPM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM) -#define MM_IO_BASE_HPM_REMAP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP) -#define MM_IO_BASE_TZPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC) -#define MM_IO_BASE_MPU MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU) -#define MM_IO_BASE_SPUMP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP) -#define MM_IO_BASE_PKA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA) -#define MM_IO_BASE_RNG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG) -#define MM_IO_BASE_KEYC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC) -#define MM_IO_BASE_BBL MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL) -#define MM_IO_BASE_OTP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP) -#define MM_IO_BASE_I2S0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0) -#define MM_IO_BASE_I2S1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1) -#define MM_IO_BASE_UARTA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA) -#define MM_IO_BASE_UARTB MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB) -#define MM_IO_BASE_I2CH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH) -#define MM_IO_BASE_SPIH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH) -#define MM_IO_BASE_TSC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC) -#define MM_IO_BASE_I2CS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS) -#define MM_IO_BASE_SPIS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS) -#define MM_IO_BASE_SINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC) -#define MM_IO_BASE_INTC0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0) -#define MM_IO_BASE_INTC1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1) -#define MM_IO_BASE_GE MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE) -#define MM_IO_BASE_USB_CTLR0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0) -#define MM_IO_BASE_USB_CTLR1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1) -#define MM_IO_BASE_USB_PHY MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY) -#define MM_IO_BASE_SDIOH0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0) -#define MM_IO_BASE_SDIOH1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1) -#define MM_IO_BASE_VDEC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC) - -#define MM_IO_BASE_VPM_EXTMEM_RSVD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD) - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* _MM_IO_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h deleted file mode 100644 index d15f5f3ec2d8..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h +++ /dev/null @@ -1,100 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw_def.h -* -* @brief Definitions for configuring/testing secure blocks -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef SECHW_DEF_H -#define SECHW_DEF_H - -#include - -/* Bit mask for various secure device */ -#define secHw_BLK_MASK_CHIP_CONTROL 0x00000001 -#define secHw_BLK_MASK_KEY_SCAN 0x00000002 -#define secHw_BLK_MASK_TOUCH_SCREEN 0x00000004 -#define secHw_BLK_MASK_UART0 0x00000008 -#define secHw_BLK_MASK_UART1 0x00000010 -#define secHw_BLK_MASK_WATCHDOG 0x00000020 -#define secHw_BLK_MASK_SPUM 0x00000040 -#define secHw_BLK_MASK_DDR2 0x00000080 -#define secHw_BLK_MASK_EXT_MEM 0x00000100 -#define secHw_BLK_MASK_ESW 0x00000200 -#define secHw_BLK_MASK_SPU 0x00010000 -#define secHw_BLK_MASK_PKA 0x00020000 -#define secHw_BLK_MASK_RNG 0x00040000 -#define secHw_BLK_MASK_RTC 0x00080000 -#define secHw_BLK_MASK_OTP 0x00100000 -#define secHw_BLK_MASK_BOOT 0x00200000 -#define secHw_BLK_MASK_MPU 0x00400000 -#define secHw_BLK_MASK_TZCTRL 0x00800000 -#define secHw_BLK_MASK_INTR 0x01000000 - -/* Trustzone register set */ -typedef struct { - volatile uint32_t status; /* read only - reflects status of writes of 2 write registers */ - volatile uint32_t setUnsecure; /* write only. reads back as 0 */ - volatile uint32_t setSecure; /* write only. reads back as 0 */ -} secHw_TZREG_t; - -/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */ -/* is for the higher 16 bits. */ - -typedef enum { - secHw_IDX_LS = 0, - secHw_IDX_MS = 1, - secHw_IDX_NUM -} secHw_IDX_e; - -typedef struct { - volatile secHw_TZREG_t reg[secHw_IDX_NUM]; -} secHw_REGS_t; - -/****************************************************************************/ -/** -* @brief Configures a device as a secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Configures a device as a non-secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure -* -*/ -/****************************************************************************/ -static inline uint32_t secHw_getStatus(void); - -#include - -#endif /* SECHW_DEF_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h deleted file mode 100644 index 9cd6a032ab71..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h +++ /dev/null @@ -1,79 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw_inline.h -* -* @brief Definitions for configuring/testing secure blocks -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef SECHW_INLINE_H -#define SECHW_INLINE_H - -/****************************************************************************/ -/** -* @brief Configures a device as a secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; - - if (mask & 0x0000FFFF) { - regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF; - } - - if (mask & 0xFFFF0000) { - regp->reg[secHw_IDX_MS].setSecure = mask >> 16; - } -} - -/****************************************************************************/ -/** -* @brief Configures a device as a non-secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; - - if (mask & 0x0000FFFF) { - regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF; - } - if (mask & 0xFFFF0000) { - regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16; - } -} - -/****************************************************************************/ -/** -* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure -* -*/ -/****************************************************************************/ -static inline uint32_t secHw_getStatus(void) -{ - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; - - return (regp->reg[1].status << 16) + regp->reg[0].status; -} - -#endif /* SECHW_INLINE_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h deleted file mode 100644 index 3080ac7239a1..000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h +++ /dev/null @@ -1,82 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file tmrHw_reg.h -* -* @brief Definitions for low level Timer registers -* -*/ -/****************************************************************************/ -#ifndef _TMRHW_REG_H -#define _TMRHW_REG_H - -#include -#include -/* Base address */ -#define tmrHw_MODULE_BASE_ADDR MM_IO_BASE_TMR - -/* -This platform has four different timers running at different clock speed - -Timer one (Timer ID 0) runs at 25 MHz -Timer two (Timer ID 1) runs at 25 MHz -Timer three (Timer ID 2) runs at 150 MHz -Timer four (Timer ID 3) runs at 150 MHz -*/ -#define tmrHw_LOW_FREQUENCY_MHZ 25 /* Always 25MHz from XTAL */ -#define tmrHw_LOW_FREQUENCY_HZ 25000000 - -#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107) -#define tmrHw_HIGH_FREQUENCY_MHZ 150 /* Always 150MHz for FPGA */ -#define tmrHw_HIGH_FREQUENCY_HZ 150000000 -#else -#define tmrHw_HIGH_FREQUENCY_HZ HW_CFG_BUS_CLK_HZ -#define tmrHw_HIGH_FREQUENCY_MHZ (HW_CFG_BUS_CLK_HZ / 1000000) -#endif - -#define tmrHw_LOW_RESOLUTION_CLOCK tmrHw_LOW_FREQUENCY_HZ -#define tmrHw_HIGH_RESOLUTION_CLOCK tmrHw_HIGH_FREQUENCY_HZ -#define tmrHw_MAX_COUNT (0xFFFFFFFF) /* maximum number of count a timer can count */ -#define tmrHw_TIMER_NUM_COUNT (4) /* Number of timer module supported */ - -typedef struct { - uint32_t LoadValue; /* Load value for timer */ - uint32_t CurrentValue; /* Current value for timer */ - uint32_t Control; /* Control register */ - uint32_t InterruptClear; /* Interrupt clear register */ - uint32_t RawInterruptStatus; /* Raw interrupt status */ - uint32_t InterruptStatus; /* Masked interrupt status */ - uint32_t BackgroundLoad; /* Background load value */ - uint32_t padding; /* Padding register */ -} tmrHw_REG_t; - -/* Control bot masks */ -#define tmrHw_CONTROL_TIMER_ENABLE 0x00000080 -#define tmrHw_CONTROL_PERIODIC 0x00000040 -#define tmrHw_CONTROL_INTERRUPT_ENABLE 0x00000020 -#define tmrHw_CONTROL_PRESCALE_MASK 0x0000000C -#define tmrHw_CONTROL_PRESCALE_1 0x00000000 -#define tmrHw_CONTROL_PRESCALE_16 0x00000004 -#define tmrHw_CONTROL_PRESCALE_256 0x00000008 -#define tmrHw_CONTROL_32BIT 0x00000002 -#define tmrHw_CONTROL_ONESHOT 0x00000001 -#define tmrHw_CONTROL_FREE_RUNNING 0x00000000 - -#define tmrHw_CONTROL_MODE_MASK (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT) - -#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR) - -#endif /* _TMRHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h deleted file mode 100644 index 72543781207b..000000000000 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ /dev/null @@ -1,630 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dma.h -* -* @brief API definitions for the linux DMA interface. -*/ -/****************************************************************************/ - -#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H) -#define ASM_ARM_ARCH_BCMRING_DMA_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include -#include - -/* ---- Constants and Types ---------------------------------------------- */ - -/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */ -/* and line number of the reservation request will be recorded in the channel table */ - -#define DMA_DEBUG_TRACK_RESERVATION 1 - -#define DMA_NUM_CONTROLLERS 2 -#define DMA_NUM_CHANNELS 8 /* per controller */ - -typedef enum { - DMA_DEVICE_MEM_TO_MEM, /* For memory to memory transfers */ - DMA_DEVICE_I2S0_DEV_TO_MEM, - DMA_DEVICE_I2S0_MEM_TO_DEV, - DMA_DEVICE_I2S1_DEV_TO_MEM, - DMA_DEVICE_I2S1_MEM_TO_DEV, - DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM, - DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV, - DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM, - DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV, - DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM, /* Additional mic input for beam-forming */ - DMA_DEVICE_APM_PCM0_DEV_TO_MEM, - DMA_DEVICE_APM_PCM0_MEM_TO_DEV, - DMA_DEVICE_APM_PCM1_DEV_TO_MEM, - DMA_DEVICE_APM_PCM1_MEM_TO_DEV, - DMA_DEVICE_SPUM_DEV_TO_MEM, - DMA_DEVICE_SPUM_MEM_TO_DEV, - DMA_DEVICE_SPIH_DEV_TO_MEM, - DMA_DEVICE_SPIH_MEM_TO_DEV, - DMA_DEVICE_UART_A_DEV_TO_MEM, - DMA_DEVICE_UART_A_MEM_TO_DEV, - DMA_DEVICE_UART_B_DEV_TO_MEM, - DMA_DEVICE_UART_B_MEM_TO_DEV, - DMA_DEVICE_PIF_MEM_TO_DEV, - DMA_DEVICE_PIF_DEV_TO_MEM, - DMA_DEVICE_ESW_DEV_TO_MEM, - DMA_DEVICE_ESW_MEM_TO_DEV, - DMA_DEVICE_VPM_MEM_TO_MEM, - DMA_DEVICE_CLCD_MEM_TO_MEM, - DMA_DEVICE_NAND_MEM_TO_MEM, - DMA_DEVICE_MEM_TO_VRAM, - DMA_DEVICE_VRAM_TO_MEM, - - /* Add new entries before this line. */ - - DMA_NUM_DEVICE_ENTRIES, - DMA_DEVICE_NONE = 0xff, /* Special value to indicate that no device is currently assigned. */ - -} DMA_Device_t; - -/**************************************************************************** -* -* The DMA_Handle_t is the primary object used by callers of the API. -* -*****************************************************************************/ - -#define DMA_INVALID_HANDLE ((DMA_Handle_t) -1) - -typedef int DMA_Handle_t; - -/**************************************************************************** -* -* The DMA_DescriptorRing_t contains a ring of descriptors which is used -* to point to regions of memory. -* -*****************************************************************************/ - -typedef struct { - void *virtAddr; /* Virtual Address of the descriptor ring */ - dma_addr_t physAddr; /* Physical address of the descriptor ring */ - int descriptorsAllocated; /* Number of descriptors allocated in the descriptor ring */ - size_t bytesAllocated; /* Number of bytes allocated in the descriptor ring */ - -} DMA_DescriptorRing_t; - -/**************************************************************************** -* -* The DMA_DeviceAttribute_t contains information which describes a -* particular DMA device (or peripheral). -* -* It is anticipated that the arrary of DMA_DeviceAttribute_t's will be -* statically initialized. -* -*****************************************************************************/ - -/* The device handler is called whenever a DMA operation completes. The reaon */ -/* for it to be called will be a bitmask with one or more of the following bits */ -/* set. */ - -#define DMA_HANDLER_REASON_BLOCK_COMPLETE dmacHw_INTERRUPT_STATUS_BLOCK -#define DMA_HANDLER_REASON_TRANSFER_COMPLETE dmacHw_INTERRUPT_STATUS_TRANS -#define DMA_HANDLER_REASON_ERROR dmacHw_INTERRUPT_STATUS_ERROR - -typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason, - void *userData); - -#define DMA_DEVICE_FLAG_ON_DMA0 0x00000001 -#define DMA_DEVICE_FLAG_ON_DMA1 0x00000002 -#define DMA_DEVICE_FLAG_PORT_PER_DMAC 0x00000004 /* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */ -#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST 0x00000008 /* If set, allocate from DMA1 before allocating from DMA0 */ -#define DMA_DEVICE_FLAG_IS_DEDICATED 0x00000100 -#define DMA_DEVICE_FLAG_NO_ISR 0x00000200 -#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO 0x00000400 -#define DMA_DEVICE_FLAG_IN_USE 0x00000800 /* If set, device is in use on a channel */ - -/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */ -/* determine which DMA controllers a given device can be used from, and the interface */ -/* array determeines the actual interface number to use for a given controller. */ - -typedef struct { - uint32_t flags; /* Bitmask of DMA_DEVICE_FLAG_xxx constants */ - uint8_t dedicatedController; /* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */ - uint8_t dedicatedChannel; /* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */ - const char *name; /* Will show up in the /proc entry */ - - uint32_t dmacPort[DMA_NUM_CONTROLLERS]; /* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */ - - dmacHw_CONFIG_t config; /* Configuration to use when DMA'ing using this device */ - - void *userData; /* Passed to the devHandler */ - DMA_DeviceHandler_t devHandler; /* Called when DMA operations finish. */ - - timer_tick_count_t transferStartTime; /* Time the current transfer was started */ - - /* The following statistical information will be collected and presented in a proc entry. */ - /* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */ - /* a 64 bit counter. */ - - uint64_t numTransfers; /* Number of DMA transfers performed */ - uint64_t transferTicks; /* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */ - uint64_t transferBytes; /* Total bytes transferred */ - uint32_t timesBlocked; /* Number of times a channel was unavailable */ - uint32_t numBytes; /* Last transfer size */ - - /* It's not possible to free memory which is allocated for the descriptors from within */ - /* the ISR. So make the presumption that a given device will tend to use the */ - /* same sized buffers over and over again, and we keep them around. */ - - DMA_DescriptorRing_t ring; /* Ring of descriptors allocated for this device */ - - /* We stash away some of the information from the previous transfer. If back-to-back */ - /* transfers are performed from the same buffer, then we don't have to keep re-initializing */ - /* the descriptor buffers. */ - - uint32_t prevNumBytes; - dma_addr_t prevSrcData; - dma_addr_t prevDstData; - -} DMA_DeviceAttribute_t; - -/**************************************************************************** -* -* DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal -* data structures and don't belong in this header file, but are included -* merely for discussion. -* -* By the time this is implemented, these structures will be moved out into -* the appropriate C source file instead. -* -*****************************************************************************/ - -/**************************************************************************** -* -* The DMA_Channel_t contains state information about each DMA channel. Some -* of the channels are dedicated. Non-dedicated channels are shared -* amongst the other devices. -* -*****************************************************************************/ - -#define DMA_CHANNEL_FLAG_IN_USE 0x00000001 -#define DMA_CHANNEL_FLAG_IS_DEDICATED 0x00000002 -#define DMA_CHANNEL_FLAG_NO_ISR 0x00000004 -#define DMA_CHANNEL_FLAG_LARGE_FIFO 0x00000008 - -typedef struct { - uint32_t flags; /* bitmask of DMA_CHANNEL_FLAG_xxx constants */ - DMA_Device_t devType; /* Device this channel is currently reserved for */ - DMA_Device_t lastDevType; /* Device type that used this previously */ - char name[20]; /* Name passed onto request_irq */ - -#if (DMA_DEBUG_TRACK_RESERVATION) - const char *fileName; /* Place where channel reservation took place */ - int lineNum; /* Place where channel reservation took place */ -#endif - dmacHw_HANDLE_t dmacHwHandle; /* low level channel handle. */ - -} DMA_Channel_t; - -/**************************************************************************** -* -* The DMA_Controller_t contains state information about each DMA controller. -* -* The freeChannelQ is stored in the controller data structure rather than -* the channel data structure since several of the devices are accessible -* from multiple controllers, and there is no way to know which controller -* will become available first. -* -*****************************************************************************/ - -typedef struct { - DMA_Channel_t channel[DMA_NUM_CHANNELS]; - -} DMA_Controller_t; - -/**************************************************************************** -* -* The DMA_Global_t contains all of the global state information used by -* the DMA code. -* -* Callers which need to allocate a shared channel will be queued up -* on the freeChannelQ until a channel becomes available. -* -*****************************************************************************/ - -typedef struct { - struct semaphore lock; /* acquired when manipulating table entries */ - wait_queue_head_t freeChannelQ; - - DMA_Controller_t controller[DMA_NUM_CONTROLLERS]; - -} DMA_Global_t; - -/* ---- Variable Externs ------------------------------------------------- */ - -extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES]; - -/* ---- Function Prototypes ---------------------------------------------- */ - -#if defined(__KERNEL__) - -/****************************************************************************/ -/** -* Initializes the DMA module. -* -* @return -* 0 - Success -* < 0 - Error -*/ -/****************************************************************************/ - -int dma_init(void); - -#if (DMA_DEBUG_TRACK_RESERVATION) -DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName, - int lineNum); -#define dma_request_channel(dev) dma_request_channel_dbg(dev, __FILE__, __LINE__) -#else - -/****************************************************************************/ -/** -* Reserves a channel for use with @a dev. If the device is setup to use -* a shared channel, then this function will block until a free channel -* becomes available. -* -* @return -* >= 0 - A valid DMA Handle. -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -DMA_Handle_t dma_request_channel(DMA_Device_t dev /* Device to use with the allocated channel. */ - ); -#endif - -/****************************************************************************/ -/** -* Frees a previously allocated DMA Handle. -* -* @return -* 0 - DMA Handle was released successfully. -* -EINVAL - Invalid DMA handle -*/ -/****************************************************************************/ - -int dma_free_channel(DMA_Handle_t channel /* DMA handle. */ - ); - -/****************************************************************************/ -/** -* Determines if a given device has been configured as using a shared -* channel. -* -* @return boolean -* 0 Device uses a dedicated channel -* non-zero Device uses a shared channel -*/ -/****************************************************************************/ - -int dma_device_is_channel_shared(DMA_Device_t dev /* Device to check. */ - ); - -/****************************************************************************/ -/** -* Allocates memory to hold a descriptor ring. The descriptor ring then -* needs to be populated by making one or more calls to -* dna_add_descriptors. -* -* The returned descriptor ring will be automatically initialized. -* -* @return -* 0 Descriptor ring was allocated successfully -* -ENOMEM Unable to allocate memory for the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */ - int numDescriptors /* Number of descriptors that need to be allocated. */ - ); - -/****************************************************************************/ -/** -* Releases the memory which was previously allocated for a descriptor ring. -*/ -/****************************************************************************/ - -void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */ - ); - -/****************************************************************************/ -/** -* Initializes a descriptor ring, so that descriptors can be added to it. -* Once a descriptor ring has been allocated, it may be reinitialized for -* use with additional/different regions of memory. -* -* Note that if 7 descriptors are allocated, it's perfectly acceptable to -* initialize the ring with a smaller number of descriptors. The amount -* of memory allocated for the descriptor ring will not be reduced, and -* the descriptor ring may be reinitialized later -* -* @return -* 0 Descriptor ring was initialized successfully -* -ENOMEM The descriptor which was passed in has insufficient space -* to hold the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */ - int numDescriptors /* Number of descriptors to initialize. */ - ); - -/****************************************************************************/ -/** -* Determines the number of descriptors which would be required for a -* transfer of the indicated memory region. -* -* This function also needs to know which DMA device this transfer will -* be destined for, so that the appropriate DMA configuration can be retrieved. -* DMA parameters such as transfer width, and whether this is a memory-to-memory -* or memory-to-peripheral, etc can all affect the actual number of descriptors -* required. -* -* @return -* > 0 Returns the number of descriptors required for the indicated transfer -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Adds a region of memory to the descriptor ring. Note that it may take -* multiple descriptors for each region of memory. It is the callers -* responsibility to allocate a sufficiently large descriptor ring. -* -* @return -* 0 Descriptors were added successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */ - DMA_Device_t device, /* DMA Device that descriptors are for */ - dma_addr_t srcData, /* Place to get data (memory or device) */ - dma_addr_t dstData, /* Place to put data (memory or device) */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Sets the descriptor ring associated with a device. -* -* Once set, the descriptor ring will be associated with the device, even -* across channel request/free calls. Passing in a NULL descriptor ring -* will release any descriptor ring currently associated with the device. -* -* Note: If you call dma_transfer, or one of the other dma_alloc_ functions -* the descriptor ring may be released and reallocated. -* -* Note: This function will release the descriptor memory for any current -* descriptor ring associated with this device. -*/ -/****************************************************************************/ - -int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */ - ); - -/****************************************************************************/ -/** -* Retrieves the descriptor ring associated with a device. -*/ -/****************************************************************************/ - -int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Place to store retrieved ring */ - ); - -/****************************************************************************/ -/** -* Allocates buffers for the descriptors. This is normally done automatically -* but needs to be done explicitly when initiating a dma from interrupt -* context. -* -* @return -* 0 Descriptors were allocated successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Allocates and sets up descriptors for a double buffered circular buffer. -* -* This is primarily intended to be used for things like the ingress samples -* from a microphone. -* -* @return -* > 0 Number of descriptors actually allocated. -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Physical address of source data */ - dma_addr_t dstData1, /* Physical address of first destination buffer */ - dma_addr_t dstData2, /* Physical address of second destination buffer */ - size_t numBytes /* Number of bytes in each destination buffer */ - ); - -/****************************************************************************/ -/** -* Initiates a transfer when the descriptors have already been setup. -* -* This is a special case, and normally, the dma_transfer_xxx functions should -* be used. -* -* @return -* 0 Transfer was started successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_start_transfer(DMA_Handle_t handle); - -/****************************************************************************/ -/** -* Stops a previously started DMA transfer. -* -* @return -* 0 Transfer was stopped successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_stop_transfer(DMA_Handle_t handle); - -/****************************************************************************/ -/** -* Waits for a DMA to complete by polling. This function is only intended -* to be used for testing. Interrupts should be used for most DMA operations. -*/ -/****************************************************************************/ - -int dma_wait_transfer_done(DMA_Handle_t handle); - -/****************************************************************************/ -/** -* Initiates a DMA transfer -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -*/ -/****************************************************************************/ - -int dma_transfer(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Initiates a transfer from memory to a device. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV) -*/ -/****************************************************************************/ - -static inline int dma_transfer_to_device(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Place to get data to write to device (physical address) */ - dma_addr_t dstData, /* Pointer to device data address (physical address) */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - return dma_transfer(handle, - dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - srcData, dstData, numBytes); -} - -/****************************************************************************/ -/** -* Initiates a transfer from a device to memory. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -*/ -/****************************************************************************/ - -static inline int dma_transfer_from_device(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Pointer to the device data address (physical address) */ - dma_addr_t dstData, /* Place to store data retrieved from the device (physical address) */ - size_t numBytes /* Number of bytes to retrieve from the device */ - ) { - return dma_transfer(handle, - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - srcData, dstData, numBytes); -} - -/****************************************************************************/ -/** -* Initiates a memory to memory transfer. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM) -*/ -/****************************************************************************/ - -static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Place to transfer data from (physical address) */ - dma_addr_t dstData, /* Place to transfer data to (physical address) */ - size_t numBytes /* Number of bytes to transfer */ - ) { - return dma_transfer(handle, - dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - srcData, dstData, numBytes); -} - -/****************************************************************************/ -/** -* Set the callback function which will be called when a transfer completes. -* If a NULL callback function is set, then no callback will occur. -* -* @note @a devHandler will be called from IRQ context. -* -* @return -* 0 - Success -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */ - DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */ - void *userData /* Pointer which will be passed to devHandler. */ - ); - -#endif - -#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */ diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S deleted file mode 100644 index 2f316f0e6e69..000000000000 --- a/arch/arm/mach-bcmring/include/mach/entry-macro.S +++ /dev/null @@ -1,76 +0,0 @@ -/***************************************************************************** -* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* - * - * Low-level IRQ helper macros for BCMRing-based platforms - * - */ -#include -#include -#include - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(MM_IO_BASE_INTC0) - ldr \irqstat, [\base, #0] @ get status - ldr \irqnr, [\base, #0x10] @ mask with enable register - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #IRQ_INTC0_START - cmp \irqstat, #0 - bne 1001f - - ldr \base, =(MM_IO_BASE_INTC1) - ldr \irqstat, [\base, #0] @ get status - ldr \irqnr, [\base, #0x10] @ mask with enable register - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #IRQ_INTC1_START - cmp \irqstat, #0 - bne 1001f - - ldr \base, =(MM_IO_BASE_SINTC) - ldr \irqstat, [\base, #0] @ get status - ldr \irqnr, [\base, #0x10] @ mask with enable register - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #0xffffffff @ code meaning no interrupt bits set - cmp \irqstat, #0 - beq 1002f - - mov \irqnr, #IRQ_SINTC_START @ something is set, so fixup return value - -1001: - movs \tmp, \irqstat, lsl #16 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - - movs \tmp, \irqstat, lsl #8 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #8 - - movs \tmp, \irqstat, lsl #4 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #4 - - movs \tmp, \irqstat, lsl #2 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #2 - - movs \tmp, \irqstat, lsl #1 - addeq \irqnr, \irqnr, #1 - orrs \base, \base, #1 - -1002: @ irqnr will be set to 0xffffffff if no irq bits are set - .endm - - .macro get_irqnr_preamble, base, tmp - .endm diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h deleted file mode 100644 index 6ae20a649a97..000000000000 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * - * This file contains the hardware definitions of the BCMRing. - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include -#include - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ -#define RAM_START PHYS_OFFSET - -#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) -#define RAM_BASE PAGE_OFFSET - -/* Macros to make managing spinlocks a bit more controlled in terms of naming. */ -/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */ -#if defined(__KERNEL__) -#define HW_DECLARE_SPINLOCK(name) DEFINE_SPINLOCK(bcmring_##name##_reg_lock); -#define HW_EXTERN_SPINLOCK(name) extern spinlock_t bcmring_##name##_reg_lock; -#define HW_IRQ_SAVE(name, val) spin_lock_irqsave(&bcmring_##name##_reg_lock, (val)) -#define HW_IRQ_RESTORE(name, val) spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val)) -#else -#define HW_DECLARE_SPINLOCK(name) -#define HW_EXTERN_SPINLOCK(name) -#define HW_IRQ_SAVE(name, val) {(void)(name); (void)(val); } -#define HW_IRQ_RESTORE(name, val) {(void)(name); (void)(val); } -#endif - -#ifndef HW_IO_PHYS_TO_VIRT -#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT -#endif -#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h deleted file mode 100644 index b279b825d4a7..000000000000 --- a/arch/arm/mach-bcmring/include/mach/irqs.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2007 Broadcom - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(ARCH_BCMRING_IRQS_H) -#define ARCH_BCMRING_IRQS_H - -/* INTC0 - interrupt controller 0 */ -#define IRQ_INTC0_START 0 -#define IRQ_DMA0C0 0 /* DMA0 channel 0 interrupt */ -#define IRQ_DMA0C1 1 /* DMA0 channel 1 interrupt */ -#define IRQ_DMA0C2 2 /* DMA0 channel 2 interrupt */ -#define IRQ_DMA0C3 3 /* DMA0 channel 3 interrupt */ -#define IRQ_DMA0C4 4 /* DMA0 channel 4 interrupt */ -#define IRQ_DMA0C5 5 /* DMA0 channel 5 interrupt */ -#define IRQ_DMA0C6 6 /* DMA0 channel 6 interrupt */ -#define IRQ_DMA0C7 7 /* DMA0 channel 7 interrupt */ -#define IRQ_DMA1C0 8 /* DMA1 channel 0 interrupt */ -#define IRQ_DMA1C1 9 /* DMA1 channel 1 interrupt */ -#define IRQ_DMA1C2 10 /* DMA1 channel 2 interrupt */ -#define IRQ_DMA1C3 11 /* DMA1 channel 3 interrupt */ -#define IRQ_DMA1C4 12 /* DMA1 channel 4 interrupt */ -#define IRQ_DMA1C5 13 /* DMA1 channel 5 interrupt */ -#define IRQ_DMA1C6 14 /* DMA1 channel 6 interrupt */ -#define IRQ_DMA1C7 15 /* DMA1 channel 7 interrupt */ -#define IRQ_VPM 16 /* Voice process module interrupt */ -#define IRQ_USBHD2 17 /* USB host2/device2 interrupt */ -#define IRQ_USBH1 18 /* USB1 host interrupt */ -#define IRQ_USBD 19 /* USB device interrupt */ -#define IRQ_SDIOH0 20 /* SDIO0 host interrupt */ -#define IRQ_SDIOH1 21 /* SDIO1 host interrupt */ -#define IRQ_TIMER0 22 /* Timer0 interrupt */ -#define IRQ_TIMER1 23 /* Timer1 interrupt */ -#define IRQ_TIMER2 24 /* Timer2 interrupt */ -#define IRQ_TIMER3 25 /* Timer3 interrupt */ -#define IRQ_SPIH 26 /* SPI host interrupt */ -#define IRQ_ESW 27 /* Ethernet switch interrupt */ -#define IRQ_APM 28 /* Audio process module interrupt */ -#define IRQ_GE 29 /* Graphic engine interrupt */ -#define IRQ_CLCD 30 /* LCD Controller interrupt */ -#define IRQ_PIF 31 /* Peripheral interface interrupt */ -#define IRQ_INTC0_END 31 - -/* INTC1 - interrupt controller 1 */ -#define IRQ_INTC1_START 32 -#define IRQ_GPIO0 32 /* 0 GPIO bit 31//0 combined interrupt */ -#define IRQ_GPIO1 33 /* 1 GPIO bit 64//32 combined interrupt */ -#define IRQ_I2S0 34 /* 2 I2S0 interrupt */ -#define IRQ_I2S1 35 /* 3 I2S1 interrupt */ -#define IRQ_I2CH 36 /* 4 I2C host interrupt */ -#define IRQ_I2CS 37 /* 5 I2C slave interrupt */ -#define IRQ_SPIS 38 /* 6 SPI slave interrupt */ -#define IRQ_GPHY 39 /* 7 Gigabit Phy interrupt */ -#define IRQ_FLASHC 40 /* 8 Flash controller interrupt */ -#define IRQ_COMMTX 41 /* 9 ARM DDC transmit interrupt */ -#define IRQ_COMMRX 42 /* 10 ARM DDC receive interrupt */ -#define IRQ_PMUIRQ 43 /* 11 ARM performance monitor interrupt */ -#define IRQ_UARTB 44 /* 12 UARTB */ -#define IRQ_WATCHDOG 45 /* 13 Watchdog timer interrupt */ -#define IRQ_UARTA 46 /* 14 UARTA */ -#define IRQ_TSC 47 /* 15 Touch screen controller interrupt */ -#define IRQ_KEYC 48 /* 16 Key pad controller interrupt */ -#define IRQ_DMPU 49 /* 17 DDR2 memory partition interrupt */ -#define IRQ_VMPU 50 /* 18 VRAM memory partition interrupt */ -#define IRQ_FMPU 51 /* 19 Flash memory parition unit interrupt */ -#define IRQ_RNG 52 /* 20 Random number generator interrupt */ -#define IRQ_RTC0 53 /* 21 Real time clock periodic interrupt */ -#define IRQ_RTC1 54 /* 22 Real time clock one-shot interrupt */ -#define IRQ_SPUM 55 /* 23 Secure process module interrupt */ -#define IRQ_VDEC 56 /* 24 Hantro video decoder interrupt */ -#define IRQ_RTC2 57 /* 25 Real time clock tamper interrupt */ -#define IRQ_DDRP 58 /* 26 DDR Panic interrupt */ -#define IRQ_INTC1_END 58 - -/* SINTC secure int controller */ -#define IRQ_SINTC_START 59 -#define IRQ_SEC_WATCHDOG 59 /* 0 Watchdog timer interrupt */ -#define IRQ_SEC_UARTA 60 /* 1 UARTA interrupt */ -#define IRQ_SEC_TSC 61 /* 2 Touch screen controller interrupt */ -#define IRQ_SEC_KEYC 62 /* 3 Key pad controller interrupt */ -#define IRQ_SEC_DMPU 63 /* 4 DDR2 memory partition interrupt */ -#define IRQ_SEC_VMPU 64 /* 5 VRAM memory partition interrupt */ -#define IRQ_SEC_FMPU 65 /* 6 Flash memory parition unit interrupt */ -#define IRQ_SEC_RNG 66 /* 7 Random number generator interrupt */ -#define IRQ_SEC_RTC0 67 /* 8 Real time clock periodic interrupt */ -#define IRQ_SEC_RTC1 68 /* 9 Real time clock one-shot interrupt */ -#define IRQ_SEC_SPUM 69 /* 10 Secure process module interrupt */ -#define IRQ_SEC_TIMER0 70 /* 11 Secure timer0 interrupt */ -#define IRQ_SEC_TIMER1 71 /* 12 Secure timer1 interrupt */ -#define IRQ_SEC_TIMER2 72 /* 13 Secure timer2 interrupt */ -#define IRQ_SEC_TIMER3 73 /* 14 Secure timer3 interrupt */ -#define IRQ_SEC_RTC2 74 /* 15 Real time clock tamper interrupt */ - -#define IRQ_SINTC_END 74 - -/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */ -/* Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */ -/* to make the mapping easy for humans to decipher. */ - -#define IRQ_GPIO_0 100 - -#define NUM_INTERNAL_IRQS (IRQ_SINTC_END+1) - -/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */ -/* define NUM_GPIO_IRQS GPIOHW_TOTAL_NUM_PINS */ -#define NUM_GPIO_IRQS 62 - -#define NR_IRQS (IRQ_GPIO_0 + NUM_GPIO_IRQS) - -#define IRQ_UNKNOWN -1 - -/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */ -#define IRQ_INTC0_VALID_MASK 0xffffffff -#define IRQ_INTC1_VALID_MASK 0x07ffffff -#define IRQ_SINTC_VALID_MASK 0x0000ffff - -#endif /* ARCH_BCMRING_IRQS_H */ diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h deleted file mode 100644 index ce5cd16f2ac4..000000000000 --- a/arch/arm/mach-bcmring/include/mach/memory_settings.h +++ /dev/null @@ -1,67 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef MEMORY_SETTINGS_H -#define MEMORY_SETTINGS_H - -/* ---- Include Files ---------------------------------------- */ -/* ---- Constants and Types ---------------------------------- */ - -/* Memory devices */ -/* NAND Flash timing for 166 MHz setting */ -#define HW_CFG_NAND_tBTA (5 << 16) /* Bus turnaround cycle (n) 0-7 (30 ns) */ -#define HW_CFG_NAND_tWP (4 << 11) /* Write pulse width cycle (n+1) 0-31 (25 ns) */ -#define HW_CFG_NAND_tWR (1 << 9) /* Write recovery cycle (n+1) 0-3 (10 ns) */ -#define HW_CFG_NAND_tAS (0 << 7) /* Write address setup cycle (n+1) 0-3 ( 0 ns) */ -#define HW_CFG_NAND_tOE (3 << 5) /* Output enable delay cycle (n) 0-3 (15 ns) */ -#define HW_CFG_NAND_tRC (7 << 0) /* Read access cycle (n+2) 0-31 (50 ns) */ - -#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \ - | HW_CFG_NAND_tWP \ - | HW_CFG_NAND_tWR \ - | HW_CFG_NAND_tAS \ - | HW_CFG_NAND_tOE \ - | HW_CFG_NAND_tRC) - -/* NOR Flash timing for 166 MHz setting */ -#define HW_CFG_NOR_TPRC_TWLC (0 << 19) /* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */ -#define HW_CFG_NOR_TBTA (0 << 16) /* Bus turnaround cycle (n) (DNA) */ -#define HW_CFG_NOR_TWP (6 << 11) /* Write pulse width cycle (n+1) (35ns) */ -#define HW_CFG_NOR_TWR (0 << 9) /* Write recovery cycle (n+1) (0ns) */ -#define HW_CFG_NOR_TAS (0 << 7) /* Write address setup cycle (n+1) (0ns) */ -#define HW_CFG_NOR_TOE (0 << 5) /* Output enable delay cycle (n) (max 25ns) */ -#define HW_CFG_NOR_TRC_TLC (0x10 << 0) /* Read access cycle / Burst read latency (n+2 / n+1) (100ns) */ - -#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \ - | HW_CFG_NOR_TBTA \ - | HW_CFG_NOR_TWP \ - | HW_CFG_NOR_TWR \ - | HW_CFG_NOR_TAS \ - | HW_CFG_NOR_TOE \ - | HW_CFG_NOR_TRC_TLC) - -#define HW_CFG_FLASH1_TCR HW_CFG_FLASH0_TCR -#define HW_CFG_FLASH2_TCR HW_CFG_FLASH0_TCR - -/* SDRAM Settings */ -/* #define HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */ -/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */ -/* #define HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */ -/* #define HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */ -#define HW_CFG_SDRAM_SIZE_BYTES 0x10000000 /* Total memory, not per device size */ - -/* ---- Variable Externs ------------------------------------- */ -/* ---- Function Prototypes ---------------------------------- */ - -#endif /* MEMORY_SETTINGS_H */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h deleted file mode 100644 index 387376ffb56b..000000000000 --- a/arch/arm/mach-bcmring/include/mach/reg_nand.h +++ /dev/null @@ -1,66 +0,0 @@ -/***************************************************************************** -* Copyright 2001 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* -* -***************************************************************************** -* -* REG_NAND.h -* -* PURPOSE: -* -* This file contains definitions for the nand registers: -* -* NOTES: -* -*****************************************************************************/ - -#if !defined(__ASM_ARCH_REG_NAND_H) -#define __ASM_ARCH_REG_NAND_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include - -/* ---- Constants and Types ---------------------------------------------- */ - -#define HW_NAND_BASE MM_IO_BASE_NAND /* NAND Flash */ - -/* DMA accesses by the bootstrap need hard nonvirtual addresses */ -#define REG_NAND_CMD __REG16(HW_NAND_BASE + 0) -#define REG_NAND_ADDR __REG16(HW_NAND_BASE + 4) - -#define REG_NAND_PHYS_DATA16 (HW_NAND_BASE + 8) -#define REG_NAND_PHYS_DATA8 (HW_NAND_BASE + 8) -#define REG_NAND_DATA16 __REG16(REG_NAND_PHYS_DATA16) -#define REG_NAND_DATA8 __REG8(REG_NAND_PHYS_DATA8) - -/* use appropriate offset to make sure it start at the 1K boundary */ -#define REG_NAND_PHYS_DATA_DMA (HW_NAND_BASE + 0x400) -#define REG_NAND_DATA_DMA __REG32(REG_NAND_PHYS_DATA_DMA) - -/* Linux DMA requires physical address of the data register */ -#define REG_NAND_DATA16_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16) -#define REG_NAND_DATA8_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8) -#define REG_NAND_DATA_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA) - -#define NAND_BUS_16BIT() (0) -#define NAND_BUS_8BIT() (!NAND_BUS_16BIT()) - -/* Register offsets */ -#define REG_NAND_CMD_OFFSET (0) -#define REG_NAND_ADDR_OFFSET (4) -#define REG_NAND_DATA8_OFFSET (8) - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h deleted file mode 100644 index 0992842caa77..000000000000 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ /dev/null @@ -1,237 +0,0 @@ -/***************************************************************************** -* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* -* -***************************************************************************** -* -* REG_UMI.h -* -* PURPOSE: -* -* This file contains definitions for the nand registers: -* -* NOTES: -* -*****************************************************************************/ - -#if !defined(__ASM_ARCH_REG_UMI_H) -#define __ASM_ARCH_REG_UMI_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include - -/* ---- Constants and Types ---------------------------------------------- */ - -/* Unified Memory Interface Ctrl Register */ -#define HW_UMI_BASE MM_IO_BASE_UMI - -/* Flash bank 0 timing and control register */ -#define REG_UMI_FLASH0_TCR __REG32(HW_UMI_BASE + 0x00) -/* Flash bank 1 timing and control register */ -#define REG_UMI_FLASH1_TCR __REG32(HW_UMI_BASE + 0x04) -/* Flash bank 2 timing and control register */ -#define REG_UMI_FLASH2_TCR __REG32(HW_UMI_BASE + 0x08) -/* MMD interface and control register */ -#define REG_UMI_MMD_ICR __REG32(HW_UMI_BASE + 0x0c) -/* NAND timing and control register */ -#define REG_UMI_NAND_TCR __REG32(HW_UMI_BASE + 0x18) -/* NAND ready/chip select register */ -#define REG_UMI_NAND_RCSR __REG32(HW_UMI_BASE + 0x1c) -/* NAND ECC control & status register */ -#define REG_UMI_NAND_ECC_CSR __REG32(HW_UMI_BASE + 0x20) -/* NAND ECC data register XXB2B1B0 */ -#define REG_UMI_NAND_ECC_DATA __REG32(HW_UMI_BASE + 0x24) -/* BCH ECC Parameter N */ -#define REG_UMI_BCH_N __REG32(HW_UMI_BASE + 0x40) -/* BCH ECC Parameter T */ -#define REG_UMI_BCH_K __REG32(HW_UMI_BASE + 0x44) -/* BCH ECC Parameter K */ -#define REG_UMI_BCH_T __REG32(HW_UMI_BASE + 0x48) -/* BCH ECC Contro Status */ -#define REG_UMI_BCH_CTRL_STATUS __REG32(HW_UMI_BASE + 0x4C) -/* BCH WR ECC 31:0 */ -#define REG_UMI_BCH_WR_ECC_0 __REG32(HW_UMI_BASE + 0x50) -/* BCH WR ECC 63:32 */ -#define REG_UMI_BCH_WR_ECC_1 __REG32(HW_UMI_BASE + 0x54) -/* BCH WR ECC 95:64 */ -#define REG_UMI_BCH_WR_ECC_2 __REG32(HW_UMI_BASE + 0x58) -/* BCH WR ECC 127:96 */ -#define REG_UMI_BCH_WR_ECC_3 __REG32(HW_UMI_BASE + 0x5c) -/* BCH WR ECC 155:128 */ -#define REG_UMI_BCH_WR_ECC_4 __REG32(HW_UMI_BASE + 0x60) -/* BCH Read Error Location 1,0 */ -#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE + 0x64) -/* BCH Read Error Location 3,2 */ -#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE + 0x68) -/* BCH Read Error Location 5,4 */ -#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE + 0x6c) -/* BCH Read Error Location 7,6 */ -#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE + 0x70) -/* BCH Read Error Location 9,8 */ -#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE + 0x74) -/* BCH Read Error Location 11,10 */ -#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE + 0x78) - -/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ -/* Enable wait pin during burst write or read */ -#define REG_UMI_TCR_WAITEN 0x80000000 -/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */ -#define REG_UMI_TCR_LOWFREQ 0x40000000 -/* 1=synch write, 0=async write */ -#define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 -/* 1=synch read, 0=async read */ -#define REG_UMI_TCR_MEMTYPE_SYNCREAD 0x10000000 -/* 1=page mode read, 0=normal mode read */ -#define REG_UMI_TCR_MEMTYPE_PAGEREAD 0x08000000 -/* page size/burst size (wrap only) */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK 0x07000000 -/* 4 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_4 0x00000000 -/* 8 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_8 0x01000000 -/* 16 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_16 0x02000000 -/* 32 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_32 0x03000000 -/* 64 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_64 0x04000000 -/* 128 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_128 0x05000000 -/* 256 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_256 0x06000000 -/* 512 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_512 0x07000000 -/* Page read access cycle / Burst write latency (n+2 / n+1) */ -#define REG_UMI_TCR_TPRC_TWLC_MASK 0x00f80000 -/* Bus turnaround cycle (n) */ -#define REG_UMI_TCR_TBTA_MASK 0x00070000 -/* Write pulse width cycle (n+1) */ -#define REG_UMI_TCR_TWP_MASK 0x0000f800 -/* Write recovery cycle (n+1) */ -#define REG_UMI_TCR_TWR_MASK 0x00000600 -/* Write address setup cycle (n+1) */ -#define REG_UMI_TCR_TAS_MASK 0x00000180 -/* Output enable delay cycle (n) */ -#define REG_UMI_TCR_TOE_MASK 0x00000060 -/* Read access cycle / Burst read latency (n+2 / n+1) */ -#define REG_UMI_TCR_TRC_TLC_MASK 0x0000001f - -/* REG_UMI_MMD_ICR bits */ -/* Flash write protection pin control */ -#define REG_UMI_MMD_ICR_FLASH_WP 0x8000 -/* Extend hold time for sram0, sram1 csn (39 MHz operation) */ -#define REG_UMI_MMD_ICR_XHCS 0x4000 -/* Enable SDRAM 2 interface control */ -#define REG_UMI_MMD_ICR_SDRAM2EN 0x2000 -/* Enable merge of flash banks 0/1 to 512 MBit bank */ -#define REG_UMI_MMD_ICR_INST512 0x1000 -/* Enable merge of flash banks 1/2 to 512 MBit bank */ -#define REG_UMI_MMD_ICR_DATA512 0x0800 -/* Enable SDRAM interface control */ -#define REG_UMI_MMD_ICR_SDRAMEN 0x0400 -/* Polarity of busy state of Burst Wait Signal */ -#define REG_UMI_MMD_ICR_WAITPOL 0x0200 -/* Enable burst clock stopped when not accessing external burst flash/sram */ -#define REG_UMI_MMD_ICR_BCLKSTOP 0x0100 -/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */ -#define REG_UMI_MMD_ICR_PERI1EN 0x0080 -/* Enable the peri2_csn to replace sdram_csn */ -#define REG_UMI_MMD_ICR_PERI2EN 0x0040 -/* Enable the peri3_csn to replace sdram2_csn */ -#define REG_UMI_MMD_ICR_PERI3EN 0x0020 -/* Enable sram bank1 for H/W controlled MRS */ -#define REG_UMI_MMD_ICR_MRSB1 0x0010 -/* Enable sram bank0 for H/W controlled MRS */ -#define REG_UMI_MMD_ICR_MRSB0 0x0008 -/* Polarity for assert3ed state of H/W controlled MRS */ -#define REG_UMI_MMD_ICR_MRSPOL 0x0004 -/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */ -/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */ -#define REG_UMI_MMD_ICR_MRSMODE 0x0002 -/* MRS state for S/W controlled mode */ -#define REG_UMI_MMD_ICR_MRSSTATE 0x0001 - -/* REG_UMI_NAND_TCR bits */ -/* Enable software to control CS */ -#define REG_UMI_NAND_TCR_CS_SWCTRL 0x80000000 -/* 16-bit nand wordsize if set */ -#define REG_UMI_NAND_TCR_WORD16 0x40000000 -/* Bus turnaround cycle (n) */ -#define REG_UMI_NAND_TCR_TBTA_MASK 0x00070000 -/* Write pulse width cycle (n+1) */ -#define REG_UMI_NAND_TCR_TWP_MASK 0x0000f800 -/* Write recovery cycle (n+1) */ -#define REG_UMI_NAND_TCR_TWR_MASK 0x00000600 -/* Write address setup cycle (n+1) */ -#define REG_UMI_NAND_TCR_TAS_MASK 0x00000180 -/* Output enable delay cycle (n) */ -#define REG_UMI_NAND_TCR_TOE_MASK 0x00000060 -/* Read access cycle (n+2) */ -#define REG_UMI_NAND_TCR_TRC_TLC_MASK 0x0000001f - -/* REG_UMI_NAND_RCSR bits */ -/* Status: Ready=1, Busy=0 */ -#define REG_UMI_NAND_RCSR_RDY 0x02 -/* Keep CS asserted during operation */ -#define REG_UMI_NAND_RCSR_CS_ASSERTED 0x01 - -/* REG_UMI_NAND_ECC_CSR bits */ -/* Interrupt status - read-only */ -#define REG_UMI_NAND_ECC_CSR_NANDINT 0x80000000 -/* Read: Status of ECC done, Write: clear ECC interrupt */ -#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW 0x00800000 -/* Read: Status of R/B, Write: clear R/B interrupt */ -#define REG_UMI_NAND_ECC_CSR_RBINT_RAW 0x00400000 -/* 1 = Enable ECC Interrupt */ -#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE 0x00008000 -/* 1 = Assert interrupt at rising edge of R/B_ */ -#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE 0x00004000 -/* Calculate ECC by 0=512 bytes, 1=256 bytes */ -#define REG_UMI_NAND_ECC_CSR_256BYTE 0x00000080 -/* Enable ECC in hardware */ -#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE 0x00000001 - -/* REG_UMI_BCH_CTRL_STATUS bits */ -/* Shift to Indicate Number of correctable errors detected */ -#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20 -/* Indicate Number of correctable errors detected */ -#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000 -/* Indicate Errors detected during read but uncorrectable */ -#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR 0x00080000 -/* Indicate Errors detected during read and are correctable */ -#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR 0x00040000 -/* Flag indicates BCH's ECC status of read process are valid */ -#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID 0x00020000 -/* Flag indicates BCH's ECC status of write process are valid */ -#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID 0x00010000 -/* Pause ECC calculation */ -#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010 -/* Enable Interrupt */ -#define REG_UMI_BCH_CTRL_STATUS_INT_EN 0x00000004 -/* Enable ECC during read */ -#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN 0x00000002 -/* Enable ECC during write */ -#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN 0x00000001 -/* Mask for location */ -#define REG_UMI_BCH_ERR_LOC_MASK 0x00001FFF -/* location within a byte */ -#define REG_UMI_BCH_ERR_LOC_BYTE 0x00000007 -/* location within a word */ -#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 -/* location within a page (512 byte) */ -#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 -#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) -#endif diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h deleted file mode 100644 index 5a94bbb032b6..000000000000 --- a/arch/arm/mach-bcmring/include/mach/timer.h +++ /dev/null @@ -1,77 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* -* -***************************************************************************** -* -* timer.h -* -* PURPOSE: -* -* -* -* NOTES: -* -*****************************************************************************/ - -#if !defined(BCM_LINUX_TIMER_H) -#define BCM_LINUX_TIMER_H - -#if defined(__KERNEL__) - -/* ---- Include Files ---------------------------------------------------- */ -/* ---- Constants and Types ---------------------------------------------- */ - -typedef unsigned int timer_tick_count_t; -typedef unsigned int timer_tick_rate_t; -typedef unsigned int timer_msec_t; - -/* ---- Variable Externs ------------------------------------------------- */ -/* ---- Function Prototypes ---------------------------------------------- */ - -/**************************************************************************** -* -* timer_get_tick_count -* -* -***************************************************************************/ -timer_tick_count_t timer_get_tick_count(void); - -/**************************************************************************** -* -* timer_get_tick_rate -* -* -***************************************************************************/ -timer_tick_rate_t timer_get_tick_rate(void); - -/**************************************************************************** -* -* timer_get_msec -* -* -***************************************************************************/ -timer_msec_t timer_get_msec(void); - -/**************************************************************************** -* -* timer_ticks_to_msec -* -* -***************************************************************************/ -timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks); - -#endif /* __KERNEL__ */ -#endif /* BCM_LINUX_TIMER_H */ diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h deleted file mode 100644 index 40d033ec5892..000000000000 --- a/arch/arm/mach-bcmring/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Specifies the number of ticks per second - */ -#define CLOCK_TICK_RATE 100000 /* REG_SMT_TICKS_PER_SEC */ diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h deleted file mode 100644 index 9c9821b77977..000000000000 --- a/arch/arm/mach-bcmring/include/mach/uncompress.h +++ /dev/null @@ -1,43 +0,0 @@ -/***************************************************************************** -* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ -#include - -#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA) -#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18)) -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - /* Send out UARTA */ - while (BCMRING_UART_0_FR & (1 << 5)) - ; - - BCMRING_UART_0_DR = c; -} - - -static inline void flush(void) -{ - /* Wait for the tx fifo to be empty */ - while ((BCMRING_UART_0_FR & (1 << 7)) == 0) - ; - - /* Wait for the final character to be sent on the txd line */ - while (BCMRING_UART_0_FR & (1 << 3)) - ; -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c deleted file mode 100644 index 437fa683bcb2..000000000000 --- a/arch/arm/mach-bcmring/irq.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -static void bcmring_mask_irq0(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC0_START), - MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR); -} - -static void bcmring_unmask_irq0(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC0_START), - MM_IO_BASE_INTC0 + INTCHW_INTENABLE); -} - -static void bcmring_mask_irq1(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC1_START), - MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR); -} - -static void bcmring_unmask_irq1(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC1_START), - MM_IO_BASE_INTC1 + INTCHW_INTENABLE); -} - -static void bcmring_mask_irq2(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_SINTC_START), - MM_IO_BASE_SINTC + INTCHW_INTENCLEAR); -} - -static void bcmring_unmask_irq2(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_SINTC_START), - MM_IO_BASE_SINTC + INTCHW_INTENABLE); -} - -static struct irq_chip bcmring_irq0_chip = { - .name = "ARM-INTC0", - .irq_ack = bcmring_mask_irq0, - .irq_mask = bcmring_mask_irq0, /* mask a specific interrupt, blocking its delivery. */ - .irq_unmask = bcmring_unmask_irq0, /* unmaks an interrupt */ -}; - -static struct irq_chip bcmring_irq1_chip = { - .name = "ARM-INTC1", - .irq_ack = bcmring_mask_irq1, - .irq_mask = bcmring_mask_irq1, - .irq_unmask = bcmring_unmask_irq1, -}; - -static struct irq_chip bcmring_irq2_chip = { - .name = "ARM-SINTC", - .irq_ack = bcmring_mask_irq2, - .irq_mask = bcmring_mask_irq2, - .irq_unmask = bcmring_unmask_irq2, -}; - -static void vic_init(void __iomem *base, struct irq_chip *chip, - unsigned int irq_start, unsigned int vic_sources) -{ - unsigned int i; - for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - irq_set_chip(irq, chip); - irq_set_chip_data(irq, base); - - if (vic_sources & (1 << i)) { - irq_set_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - } - writel(0, base + INTCHW_INTSELECT); - writel(0, base + INTCHW_INTENABLE); - writel(~0, base + INTCHW_INTENCLEAR); - writel(0, base + INTCHW_IRQSTATUS); - writel(~0, base + INTCHW_SOFTINTCLEAR); -} - -void __init bcmring_init_irq(void) -{ - vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip, - IRQ_INTC0_START, IRQ_INTC0_VALID_MASK); - vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip, - IRQ_INTC1_START, IRQ_INTC1_VALID_MASK); - vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip, - IRQ_SINTC_START, IRQ_SINTC_VALID_MASK); - - /* special cases */ - if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) { - irq_set_handler(IRQ_GPIO0, handle_simple_irq); - } - if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) { - irq_set_handler(IRQ_GPIO1, handle_simple_irq); - } -} diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c deleted file mode 100644 index 1adec78ec940..000000000000 --- a/arch/arm/mach-bcmring/mm.c +++ /dev/null @@ -1,60 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include -#include - -#include -#include - -#define IO_DESC(va, sz) { .virtual = va, \ - .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ - .length = sz, \ - .type = MT_DEVICE } - -#define MEM_DESC(va, sz) { .virtual = va, \ - .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ - .length = sz, \ - .type = MT_MEMORY } - -static struct map_desc bcmring_io_desc[] __initdata = { - IO_DESC(MM_IO_BASE_NAND, SZ_64K), /* phys:0x28000000-0x28000FFF virt:0xE8000000-0xE8000FFF size:0x00010000 */ - IO_DESC(MM_IO_BASE_UMI, SZ_64K), /* phys:0x2C000000-0x2C000FFF virt:0xEC000000-0xEC000FFF size:0x00010000 */ - - IO_DESC(MM_IO_BASE_BROM, SZ_64K), /* phys:0x30000000-0x3000FFFF virt:0xF3000000-0xF300FFFF size:0x00010000 */ - MEM_DESC(MM_IO_BASE_ARAM, SZ_1M), /* phys:0x31000000-0x31FFFFFF virt:0xF3100000-0xF31FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_DMA0, SZ_1M), /* phys:0x32000000-0x32FFFFFF virt:0xF3200000-0xF32FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_DMA1, SZ_1M), /* phys:0x33000000-0x33FFFFFF virt:0xF3300000-0xF33FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_ESW, SZ_1M), /* phys:0x34000000-0x34FFFFFF virt:0xF3400000-0xF34FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_CLCD, SZ_1M), /* phys:0x35000000-0x35FFFFFF virt:0xF3500000-0xF35FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_APM, SZ_1M), /* phys:0x36000000-0x36FFFFFF virt:0xF3600000-0xF36FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_SPUM, SZ_1M), /* phys:0x37000000-0x37FFFFFF virt:0xF3700000-0xF37FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M), /* phys:0x38000000-0x38FFFFFF virt:0xF3800000-0xF38FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M), /* phys:0x3A000000-0x3AFFFFFF virt:0xF3A00000-0xF3AFFFFF size:0x01000000 */ - - IO_DESC(MM_IO_BASE_VRAM, SZ_64K), /* phys:0x40000000-0x4000FFFF virt:0xF4000000-0xF400FFFF size:0x00010000 */ - IO_DESC(MM_IO_BASE_CHIPC, SZ_16M), /* phys:0x80000000-0x80FFFFFF virt:0xF8000000-0xF8FFFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD, - SZ_16M), /* phys:0x0F000000-0x0FFFFFFF virt:0xF0000000-0xF0FFFFFF size:0x01000000 */ -}; - -void __init bcmring_map_io(void) -{ - - iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc)); - /* Maximum DMA memory allowed is 14M */ - init_consistent_dma_size(14 << 20); -} diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c deleted file mode 100644 index af9c3d7e2a0c..000000000000 --- a/arch/arm/mach-bcmring/timer.c +++ /dev/null @@ -1,61 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include - -#include -/* The core.c file initializes timers 1 and 3 as a linux clocksource. */ -/* The real time clock should probably be the real linux clocksource. */ -/* In the meantime, this file should agree with core.c as to the */ -/* profiling timer. If the clocksource is moved to rtc later, then */ -/* we can init the profiling timer here instead. */ - -/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */ -/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */ -/* affect synchronization with scheduling and APM timing. */ - -#define PROF_TIMER 1 - -timer_tick_rate_t timer_get_tick_rate(void) -{ - return tmrHw_getCountRate(PROF_TIMER); -} - -timer_tick_count_t timer_get_tick_count(void) -{ - return tmrHw_GetCurrentCount(PROF_TIMER); /* change downcounter to upcounter */ -} - -timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks) -{ - static int tickRateMsec; - - if (tickRateMsec == 0) { - tickRateMsec = timer_get_tick_rate() / 1000; - } - - return ticks / tickRateMsec; -} - -timer_msec_t timer_get_msec(void) -{ - return timer_ticks_to_msec(timer_get_tick_count()); -} - -EXPORT_SYMBOL(timer_get_tick_count); -EXPORT_SYMBOL(timer_ticks_to_msec); -EXPORT_SYMBOL(timer_get_tick_rate); -EXPORT_SYMBOL(timer_get_msec);