From: xbw <xbw@rock-chips.com>
Date: Fri, 7 Jun 2013 09:02:43 +0000 (+0800)
Subject: board-wifi config error.
X-Git-Tag: firefly_0821_release~6992
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=ac7caef32e82f624a8eb9ab24acdaeb609c87d1d;p=firefly-linux-kernel-4.4.55.git

board-wifi config error.
---

diff --git a/arch/arm/mach-rk30/board-LR097-sdmmc-config.c b/arch/arm/mach-rk30/board-LR097-sdmmc-config.c
index 8a1c586048f5..371dfce156e6 100644
--- a/arch/arm/mach-rk30/board-LR097-sdmmc-config.c
+++ b/arch/arm/mach-rk30/board-LR097-sdmmc-config.c
@@ -125,15 +125,15 @@ double rk31sdk_get_sdio_wifi_voltage(void)
     **  Please tell me how much wifi-module uses voltage in your project.  
     ******************************************************************************/
 #if defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
-    voltage = 1.8 ; //power 1.8V
+    voltage = 1800 ; //power 1.8V
     
 #elif defined(CONFIG_MT5931_MT6622)||defined(CONFIG_MT5931)||defined(CONFIG_MT6620)
-    voltage = 1.8 ; //power 2.8V
+    voltage = 1800 ; //power 2.8V
 #elif defined(CONFIG_RDA5990)||defined(CONFIG_RTL8723AS)  
-    voltage = 3.3 ; //power 3.3V
+    voltage = 3300 ; //power 3.3V
 #else
     //default, sdio use 3.0V
-    voltage = 3.0 ; //power 3.0V
+    voltage = 3000 ; //power 3.0V
 #endif
 
     return voltage;
diff --git a/arch/arm/mach-rk30/board-rk3168-ds1006h-sdmmc-config.c b/arch/arm/mach-rk30/board-rk3168-ds1006h-sdmmc-config.c
index e399723c457b..658bfc9e0ca0 100644
--- a/arch/arm/mach-rk30/board-rk3168-ds1006h-sdmmc-config.c
+++ b/arch/arm/mach-rk30/board-rk3168-ds1006h-sdmmc-config.c
@@ -125,15 +125,15 @@ double rk31sdk_get_sdio_wifi_voltage(void)
     **  Please tell me how much wifi-module uses voltage in your project.  
     ******************************************************************************/
 #if defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
-    voltage = 1.8 ; //power 1.8V
+    voltage = 1800 ; //power 1.8V
     
 #elif defined(CONFIG_MT5931_MT6622)||defined(CONFIG_MT5931)||defined(CONFIG_MT6620)
-    voltage = 2.8 ; //power 2.8V
+    voltage = 2800 ; //power 2.8V
 #elif defined(CONFIG_RDA5990)||defined(CONFIG_RTL8723AS)  
-    voltage = 3.3 ; //power 3.3V
+    voltage = 3300 ; //power 3.3V
 #else
     //default, sdio use 3.0V
-    voltage = 3.0 ; //power 3.0V
+    voltage = 3000 ; //power 3.0V
 #endif
 
     return voltage;