From: Anton Vorontsov Date: Tue, 29 Apr 2008 15:53:13 +0000 (+0400) Subject: uli526x: initialize the hardware prior to requesting interrupts X-Git-Tag: firefly_0821_release~20319^2~24^2~12 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=afd8e39919c913993ac2f9984af8a9ba21c63d27;p=firefly-linux-kernel-4.4.55.git uli526x: initialize the hardware prior to requesting interrupts The firmware on MPC8610HPCD boards enables ULI ethernet and leaves it in some funky state before booting Linux. For drivers, it's always good idea to (re)initialize the hardware prior to requesting interrupts. This patch fixes the following oops: Oops: Kernel access of bad area, sig: 11 [#1] MPC86xx HPCD NIP: c0172820 LR: c017287c CTR: 00000000 [...] NIP [c0172820] allocate_rx_buffer+0x2c/0xb0 LR [c017287c] allocate_rx_buffer+0x88/0xb0 Call Trace: [df82bdc0] [c017287c] allocate_rx_buffer+0x88/0xb0 (unreliable) [df82bde0] [c0173000] uli526x_interrupt+0xe4/0x49c [df82be20] [c0045418] request_irq+0xf0/0x114 [df82be50] [c01737b0] uli526x_open+0x48/0x160 [df82be70] [c0201184] dev_open+0xb0/0xe8 [df82be80] [c0200104] dev_change_flags+0x90/0x1bc [df82bea0] [c035fab0] ip_auto_config+0x214/0xef4 [df82bf60] [c03421c8] kernel_init+0xc4/0x2ac [df82bff0] [c0010834] kernel_thread+0x44/0x60 Instruction dump: 4e800020 9421ffe0 7c0802a6 bfa10014 7c7e1b78 90010024 80030060 83e30054 2b80002f 419d0078 3fa0c039 48000058 <907f0010> 80630088 2f830000 419e0014 Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index a59c1f224aa8..1f077ac9b0e0 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -434,10 +434,6 @@ static int uli526x_open(struct net_device *dev) ULI526X_DBUG(0, "uli526x_open", 0); - ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev); - if (ret) - return ret; - /* system variable init */ db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; db->tx_packet_cnt = 0; @@ -456,6 +452,10 @@ static int uli526x_open(struct net_device *dev) /* Initialize ULI526X board */ uli526x_init(dev); + ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev); + if (ret) + return ret; + /* Active System Interface */ netif_wake_queue(dev);