From: Takashi Iwai Date: Thu, 28 May 2009 10:26:15 +0000 (+0200) Subject: ALSA: hda - Add more register bits definitions X-Git-Tag: firefly_0821_release~13628^2~11^2~18 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=b21fadb9c1852c91622ca1dccfeb144bc535e36e;p=firefly-linux-kernel-4.4.55.git ALSA: hda - Add more register bits definitions Added some missing register bits definitions to reduce magic numbers. Also renamed some to follow the names on the datasheet. Signed-off-by: Takashi Iwai --- diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 31a695e6e37d..f63bc6510e0f 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -138,14 +138,23 @@ MODULE_DESCRIPTION("Intel HDA driver"); * registers */ #define ICH6_REG_GCAP 0x00 +#define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */ +#define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define ICH6_GCAP_ISS (15 << 8) /* # of input streams */ +#define ICH6_GCAP_OSS (15 << 12) /* # of output streams */ #define ICH6_REG_VMIN 0x02 #define ICH6_REG_VMAJ 0x03 #define ICH6_REG_OUTPAY 0x04 #define ICH6_REG_INPAY 0x06 #define ICH6_REG_GCTL 0x08 +#define ICH6_GCTL_RESET (1 << 1) /* controller reset */ +#define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */ +#define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ #define ICH6_REG_WAKEEN 0x0c #define ICH6_REG_STATESTS 0x0e #define ICH6_REG_GSTS 0x10 +#define ICH6_GSTS_FSTS (1 << 1) /* flush status */ #define ICH6_REG_INTCTL 0x20 #define ICH6_REG_INTSTS 0x24 #define ICH6_REG_WALCLK 0x30 @@ -153,17 +162,27 @@ MODULE_DESCRIPTION("Intel HDA driver"); #define ICH6_REG_CORBLBASE 0x40 #define ICH6_REG_CORBUBASE 0x44 #define ICH6_REG_CORBWP 0x48 -#define ICH6_REG_CORBRP 0x4A +#define ICH6_REG_CORBRP 0x4a +#define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */ #define ICH6_REG_CORBCTL 0x4c +#define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ #define ICH6_REG_CORBSTS 0x4d +#define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */ #define ICH6_REG_CORBSIZE 0x4e #define ICH6_REG_RIRBLBASE 0x50 #define ICH6_REG_RIRBUBASE 0x54 #define ICH6_REG_RIRBWP 0x58 +#define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */ #define ICH6_REG_RINTCNT 0x5a #define ICH6_REG_RIRBCTL 0x5c +#define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ #define ICH6_REG_RIRBSTS 0x5d +#define ICH6_RBSTS_IRQ (1 << 0) /* response irq */ +#define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */ #define ICH6_REG_RIRBSIZE 0x5e #define ICH6_REG_IC 0x60 @@ -260,16 +279,6 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; #define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ #define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ -/* GCTL unsolicited response enable bit */ -#define ICH6_GCTL_UREN (1<<8) - -/* GCTL reset bit */ -#define ICH6_GCTL_RESET (1<<0) - -/* CORB/RIRB control, read/write pointer */ -#define ICH6_RBCTL_DMA_EN 0x02 /* enable DMA */ -#define ICH6_RBCTL_IRQ_EN 0x01 /* enable IRQ */ -#define ICH6_RBRWP_CLR 0x8000 /* read/write pointer clear */ /* below are so far hardcoded - should read registers in future */ #define ICH6_MAX_CORB_ENTRIES 256 #define ICH6_MAX_RIRB_ENTRIES 256 @@ -515,9 +524,9 @@ static void azx_init_cmd_io(struct azx *chip) /* set the corb write pointer to 0 */ azx_writew(chip, CORBWP, 0); /* reset the corb hw read pointer */ - azx_writew(chip, CORBRP, ICH6_RBRWP_CLR); + azx_writew(chip, CORBRP, ICH6_CORBRP_RST); /* enable corb dma */ - azx_writeb(chip, CORBCTL, ICH6_RBCTL_DMA_EN); + azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN); /* RIRB set up */ chip->rirb.addr = chip->rb.addr + 2048; @@ -529,7 +538,7 @@ static void azx_init_cmd_io(struct azx *chip) /* set the rirb size to 256 entries (ULI requires explicitly) */ azx_writeb(chip, RIRBSIZE, 0x02); /* reset the rirb hw write pointer */ - azx_writew(chip, RIRBWP, ICH6_RBRWP_CLR); + azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST); /* set N=1, get RIRB response interrupt for new entry */ azx_writew(chip, RINTCNT, 1); /* enable rirb dma and response irq */ @@ -796,7 +805,7 @@ static int azx_reset(struct azx *chip) } /* Accept unsolicited responses */ - azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UREN); + azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); /* detect codecs */ if (!chip->codec_mask) { @@ -2284,10 +2293,10 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, /* ATI chips seems buggy about 64bit DMA addresses */ if (chip->driver_type == AZX_DRIVER_ATI) - gcap &= ~0x01; + gcap &= ~ICH6_GCAP_64OK; /* allow 64bit DMA address if supported by H/W */ - if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) + if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64)); else { pci_set_dma_mask(pci, DMA_BIT_MASK(32));