From: Alistair Buxton Date: Wed, 23 Sep 2009 17:56:19 +0000 (+0100) Subject: OMAP7XX: GPIO: Remove duplicate omap850 code X-Git-Tag: firefly_0821_release~9833^2~3961^2~69^2~2^2~21^2~15 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=b718aa810b50e0d988d8b83f1011865b19b17491;p=firefly-linux-kernel-4.4.55.git OMAP7XX: GPIO: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea1..665ca050183f 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -83,22 +83,6 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 -/* - * OMAP850 specific GPIO registers - */ -#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP850_GPIO_DATA_INPUT 0x00 -#define OMAP850_GPIO_DATA_OUTPUT 0x04 -#define OMAP850_GPIO_DIR_CONTROL 0x08 -#define OMAP850_GPIO_INT_CONTROL 0x0c -#define OMAP850_GPIO_INT_MASK 0x10 -#define OMAP850_GPIO_INT_STATUS 0x14 - #define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) /* @@ -216,7 +200,6 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 -#define METHOD_GPIO_850 4 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX @@ -236,7 +219,7 @@ static struct gpio_bank gpio_bank_1510[2] = { }; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct gpio_bank gpio_bank_730[7] = { { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, @@ -248,19 +231,6 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, - { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, - { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, - { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, - { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, - { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, -}; -#endif - - #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { @@ -402,16 +372,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP1610_GPIO_DIRECTION; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -469,7 +434,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_OUTPUT; l = __raw_readl(reg); @@ -479,16 +444,6 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -537,16 +492,11 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAIN; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_INPUT; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; @@ -588,16 +538,11 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAOUT; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_OUTPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: @@ -797,7 +742,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); @@ -809,18 +754,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: @@ -897,16 +830,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_STATUS; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; @@ -971,20 +899,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) mask = 0xffff; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; @@ -1044,7 +965,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; l = __raw_readl(reg); @@ -1054,16 +975,6 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -1249,14 +1160,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif -#ifdef CONFIG_ARCH_OMAP850 - if (bank->method == METHOD_GPIO_850) - isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; @@ -1527,9 +1434,6 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -1695,21 +1599,13 @@ static int __init _omap_gpio_init(void) (rev >> 4) & 0x0f, rev & 0x0f); } #endif -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - printk(KERN_INFO "OMAP730 GPIO hardware\n"); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + printk(KERN_INFO "OMAP7XX GPIO hardware\n"); gpio_bank_count = 7; gpio_bank = gpio_bank_730; } #endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - printk(KERN_INFO "OMAP850 GPIO hardware\n"); - gpio_bank_count = 7; - gpio_bank = gpio_bank_850; - } -#endif - #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { int rev; @@ -2160,8 +2056,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730() || - cpu_is_omap850()) + else if (cpu_class_is_omap2() || cpu_is_omap7xx()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {