From: Ian Molton <ian.molton@codethink.co.uk>
Date: Wed, 3 Jun 2015 13:59:53 +0000 (-0300)
Subject: [media] media: adv7604: ability to read default input port from DT
X-Git-Tag: firefly_0821_release~176^2~795^2~383
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=bf9c82278c348eb6b72496de6a3e5269aadb6b34;p=firefly-linux-kernel-4.4.55.git

[media] media: adv7604: ability to read default input port from DT

Adds support to the adv7604 driver for specifying the default input
port in the Device tree. If no value is provided, the driver will be
unable to select an input without help from userspace.

Tested-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
---

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 7eafdbc055f9..8337f75c75da 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -47,6 +47,7 @@ Optional Endpoint Properties:
   If none of hsync-active, vsync-active and pclk-sample is specified the
   endpoint will use embedded BT.656 synchronization.
 
+  - default-input: Select which input is selected after reset.
 
 Example:
 
@@ -60,6 +61,8 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		default-input = <0>;
+
 		port@0 {
 			reg = <0>;
 		};
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index c8fefeab0513..21b549a8dc74 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2772,6 +2772,7 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
 	struct device_node *endpoint;
 	struct device_node *np;
 	unsigned int flags;
+	u32 v;
 
 	np = state->i2c_clients[ADV76XX_PAGE_IO]->dev.of_node;
 
@@ -2781,6 +2782,12 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
 		return -EINVAL;
 
 	v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+
+	if (!of_property_read_u32(endpoint, "default-input", &v))
+		state->pdata.default_input = v;
+	else
+		state->pdata.default_input = -1;
+
 	of_node_put(endpoint);
 
 	flags = bus_cfg.bus.parallel.flags;
@@ -2819,7 +2826,6 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
 	/* Hardcode the remaining platform data fields. */
 	state->pdata.disable_pwrdnb = 0;
 	state->pdata.disable_cable_det_rst = 0;
-	state->pdata.default_input = -1;
 	state->pdata.blank_data = 1;
 	state->pdata.alt_data_sat = 1;
 	state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0;