From: Christian Hemp Date: Fri, 14 Nov 2014 13:32:24 +0000 (+0100) Subject: ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic X-Git-Tag: firefly_0821_release~176^2~2766^2~10^2~5 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=c082fd422e66df8e2492e27219192a773ccb72e5;p=firefly-linux-kernel-4.4.55.git ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic The PMIC interrupt was changed from modul revision 1 to 2. Revision 1 was declared as a prototype and is not in series by any customers. Signed-off-by: Christian Hemp Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index af3065336969..8d718b55a07f 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -107,8 +107,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ + interrupt-parent = <&gpio2>; + interrupts = <9 0x8>; /* active-low GPIO2_9 */ regulators { vddcore_reg: bcore1 { @@ -205,7 +205,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ >;