From: Mike Isely Date: Sun, 28 Jan 2007 18:41:12 +0000 (-0300) Subject: V4L/DVB (5173): Pvrusb2: encoder comm protocol cleanup X-Git-Tag: firefly_0821_release~31016^2~58 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=c43000ef0c9f21fff090ff3b5428ac31a41dbc99;p=firefly-linux-kernel-4.4.55.git V4L/DVB (5173): Pvrusb2: encoder comm protocol cleanup Update the implementation of the communication protocol for operating the encoder, using updated knowledge about the encoder. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index ee5eb26ad56d..7cd95e9f914d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -35,34 +35,41 @@ #define IVTV_MBOX_DRIVER_DONE 0x00000002 #define IVTV_MBOX_DRIVER_BUSY 0x00000001 +#define MBOX_BASE 0x44 + static int pvr2_encoder_write_words(struct pvr2_hdw *hdw, + unsigned int offs, const u32 *data, unsigned int dlen) { - unsigned int idx; + unsigned int idx,addr; + unsigned int bAddr; int ret; - unsigned int offs = 0; unsigned int chunkCnt; /* Format: First byte must be 0x01. Remaining 32 bit words are - spread out into chunks of 7 bytes each, little-endian ordered, - offset at zero within each 2 blank bytes following and a - single byte that is 0x44 plus the offset of the word. Repeat - request for additional words, with offset adjusted - accordingly. + spread out into chunks of 7 bytes each, with the first 4 bytes + being the data word (little endian), and the next 3 bytes + being the address where that data word is to be written (big + endian). Repeat request for additional words, with offset + adjusted accordingly. */ while (dlen) { chunkCnt = 8; if (chunkCnt > dlen) chunkCnt = dlen; memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer)); - hdw->cmd_buffer[0] = FX2CMD_MEM_WRITE_DWORD; + bAddr = 0; + hdw->cmd_buffer[bAddr++] = FX2CMD_MEM_WRITE_DWORD; for (idx = 0; idx < chunkCnt; idx++) { - hdw->cmd_buffer[1+(idx*7)+6] = 0x44 + idx + offs; - PVR2_DECOMPOSE_LE(hdw->cmd_buffer, 1+(idx*7), - data[idx]); + addr = idx + offs; + hdw->cmd_buffer[bAddr+6] = (addr & 0xffu); + hdw->cmd_buffer[bAddr+5] = ((addr>>8) & 0xffu); + hdw->cmd_buffer[bAddr+4] = ((addr>>16) & 0xffu); + PVR2_DECOMPOSE_LE(hdw->cmd_buffer, bAddr,data[idx]); + bAddr += 7; } ret = pvr2_send_request(hdw, hdw->cmd_buffer,1+(chunkCnt*7), @@ -77,34 +84,42 @@ static int pvr2_encoder_write_words(struct pvr2_hdw *hdw, } -static int pvr2_encoder_read_words(struct pvr2_hdw *hdw,int statusFl, +static int pvr2_encoder_read_words(struct pvr2_hdw *hdw, + unsigned int offs, u32 *data, unsigned int dlen) { unsigned int idx; int ret; - unsigned int offs = 0; unsigned int chunkCnt; /* Format: First byte must be 0x02 (status check) or 0x28 (read back block of 32 bit words). Next 6 bytes must be zero, - followed by a single byte of 0x44+offset for portion to be - read. Returned data is packed set of 32 bits words that were - read. + followed by a single byte of MBOX_BASE+offset for portion to + be read. Returned data is packed set of 32 bits words that + were read. */ while (dlen) { chunkCnt = 16; if (chunkCnt > dlen) chunkCnt = dlen; - memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer)); + if (chunkCnt < 16) chunkCnt = 1; hdw->cmd_buffer[0] = - (statusFl ? FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES); - hdw->cmd_buffer[7] = 0x44 + offs; + ((chunkCnt == 1) ? + FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES); + hdw->cmd_buffer[1] = 0; + hdw->cmd_buffer[2] = 0; + hdw->cmd_buffer[3] = 0; + hdw->cmd_buffer[4] = 0; + hdw->cmd_buffer[5] = ((offs>>16) & 0xffu); + hdw->cmd_buffer[6] = ((offs>>8) & 0xffu); + hdw->cmd_buffer[7] = (offs & 0xffu); ret = pvr2_send_request(hdw, hdw->cmd_buffer,8, - hdw->cmd_buffer,chunkCnt * 4); + hdw->cmd_buffer, + (chunkCnt == 1 ? 4 : 16 * 4)); if (ret) return ret; for (idx = 0; idx < chunkCnt; idx++) { @@ -131,6 +146,8 @@ static int pvr2_encoder_cmd(void *ctxt, u32 *argp) { unsigned int poll_count; + unsigned int try_count = 0; + int retry_flag; int ret = 0; unsigned int idx; /* These sizes look to be limited by the FX2 firmware implementation */ @@ -142,14 +159,15 @@ static int pvr2_encoder_cmd(void *ctxt, /* The encoder seems to speak entirely using blocks 32 bit words. - In ivtv driver terms, this is a mailbox which we populate with - data and watch what the hardware does with it. The first word - is a set of flags used to control the transaction, the second - word is the command to execute, the third byte is zero (ivtv - driver suggests that this is some kind of return value), and - the fourth byte is a specified timeout (windows driver always - uses 0x00060000 except for one case when it is zero). All - successive words are the argument words for the command. + In ivtv driver terms, this is a mailbox at MBOX_BASE which we + populate with data and watch what the hardware does with it. + The first word is a set of flags used to control the + transaction, the second word is the command to execute, the + third byte is zero (ivtv driver suggests that this is some + kind of return value), and the fourth byte is a specified + timeout (windows driver always uses 0x00060000 except for one + case when it is zero). All successive words are the argument + words for the command. First, write out the entire set of words, with the first word being zero. @@ -158,13 +176,10 @@ static int pvr2_encoder_cmd(void *ctxt, IVTV_MBOX_DRIVER_DONE | IVTV_DRIVER_BUSY this time (which probably means "go"). - Next, read back 16 words as status. Check the first word, + Next, read back the return count words. Check the first word, which should have IVTV_MBOX_FIRMWARE_DONE set. If however that bit is not set, then the command isn't done so repeat the - read. - - Next, read back 32 words and compare with the original - arugments. Hopefully they will match. + read until it is set. Finally, write out just the first word again, but set it to 0x0 this time (which probably means "idle"). @@ -194,6 +209,9 @@ static int pvr2_encoder_cmd(void *ctxt, LOCK_TAKE(hdw->ctl_lock); do { + retry_flag = 0; + try_count++; + ret = 0; wrData[0] = 0; wrData[1] = cmd; wrData[2] = 0; @@ -205,54 +223,70 @@ static int pvr2_encoder_cmd(void *ctxt, wrData[idx+4] = 0; } - ret = pvr2_encoder_write_words(hdw,wrData,idx); + ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,idx); if (ret) break; wrData[0] = IVTV_MBOX_DRIVER_DONE|IVTV_MBOX_DRIVER_BUSY; - ret = pvr2_encoder_write_words(hdw,wrData,1); + ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1); if (ret) break; poll_count = 0; while (1) { - if (poll_count < 10000000) poll_count++; - ret = pvr2_encoder_read_words(hdw,!0,rdData,1); - if (ret) break; + poll_count++; + ret = pvr2_encoder_read_words(hdw,MBOX_BASE,rdData, + arg_cnt_recv+4); + if (ret) { + break; + } if (rdData[0] & IVTV_MBOX_FIRMWARE_DONE) { break; } - if (poll_count == 100) { + if (rdData[0] && (poll_count < 1000)) continue; + if (!rdData[0]) { + retry_flag = !0; + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Encoder timed out waiting for us" + "; arranging to retry"); + } else { pvr2_trace( PVR2_TRACE_ERROR_LEGS, "***WARNING*** device's encoder" " appears to be stuck" " (status=0%08x)",rdData[0]); + } + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Encoder command: 0x%02x",cmd); + for (idx = 4; idx < arg_cnt_send; idx++) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Encoder command: 0x%02x",cmd); - for (idx = 4; idx < arg_cnt_send; idx++) { - pvr2_trace( - PVR2_TRACE_ERROR_LEGS, - "Encoder arg%d: 0x%08x", - idx-3,wrData[idx]); - } - pvr2_trace( - PVR2_TRACE_ERROR_LEGS, - "Giving up waiting." - " It is likely that" - " this is a bad idea..."); - ret = -EBUSY; - break; + "Encoder arg%d: 0x%08x", + idx-3,wrData[idx]); } + ret = -EBUSY; + break; + } + if (retry_flag) { + if (try_count < 20) continue; + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Too many retries..."); + ret = -EBUSY; + } + if (ret) { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "Giving up on command." + " It is likely that" + " this is a bad idea..."); + break; } - if (ret) break; wrData[0] = 0x7; - ret = pvr2_encoder_read_words( - hdw,0,rdData, ARRAY_SIZE(rdData)); - if (ret) break; for (idx = 0; idx < arg_cnt_recv; idx++) { argp[idx] = rdData[idx+4]; } wrData[0] = 0x0; - ret = pvr2_encoder_write_words(hdw,wrData,1); + ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1); if (ret) break; } while(0); LOCK_GIVE(hdw->ctl_lock);