From: Steve Sakoman <steve@sakoman.com>
Date: Sat, 5 Mar 2011 16:12:26 +0000 (-0600)
Subject: omap: overo: Add regulator for ads7846
X-Git-Tag: firefly_0821_release~7613^2~1826^2~58^2~25
X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=ca0a6a6473f69f1773c97755840587262d841883;p=firefly-linux-kernel-4.4.55.git

omap: overo: Add regulator for ads7846

The ads7846 driver now requires a regulator.  This patch adds the
necessary regulator to the overo board file.  Without it, the
following error occurs (and the touchscreen will not function):

ads7846 spi1.0: unable to get regulator: -19

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index d621ee8fec0c..4278ecb799a2 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -28,6 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/spi/spi.h>
 
 #include <linux/mtd/mtd.h>
@@ -97,6 +98,34 @@ static struct ads7846_platform_data ads7846_config = {
 	.keep_vref_on		= 1,
 };
 
+/* fixed regulator for ads7846 */
+static struct regulator_consumer_supply ads7846_supply =
+	REGULATOR_SUPPLY("vcc", "spi1.0");
+
+static struct regulator_init_data vads7846_regulator = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+	.supply_name		= "vads7846",
+	.microvolts		= 3300000, /* 3.3V */
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.init_data		= &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &vads7846,
+	},
+};
+
 static void __init overo_ads7846_init(void)
 {
 	if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
@@ -106,6 +135,8 @@ static void __init overo_ads7846_init(void)
 		printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
 		return;
 	}
+
+	platform_device_register(&vads7846_device);
 }
 
 #else