From: Anson Huang Date: Tue, 6 Jan 2015 10:50:22 +0000 (+0800) Subject: Thermal: imx: add clk disable/enable for suspend/resume X-Git-Tag: firefly_0821_release~176^2~2516^2^2~4 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=d26eef8b725da620980ee20f7812f4488a206483;p=firefly-linux-kernel-4.4.55.git Thermal: imx: add clk disable/enable for suspend/resume Thermal sensor's clk is from pll3_usb_otg, per hardware design requirement, need to make sure pll3_usb_otg is disabled before STOP mode is entered, otherwise, all PFDs under it may enter incorrect state, this patch disables pll3_usb_otg before suspend and enables it after resume. Signed-off-by: Anson Huang Signed-off-by: Eduardo Valentin --- diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index c1188ac053c9..2ccbc0788353 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -608,6 +608,7 @@ static int imx_thermal_suspend(struct device *dev) regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); data->mode = THERMAL_DEVICE_DISABLED; + clk_disable_unprepare(data->thermal_clk); return 0; } @@ -617,6 +618,7 @@ static int imx_thermal_resume(struct device *dev) struct imx_thermal_data *data = dev_get_drvdata(dev); struct regmap *map = data->tempmon; + clk_prepare_enable(data->thermal_clk); /* Enabled thermal sensor after resume */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);