From: Per Forlin Date: Tue, 2 Aug 2011 15:33:39 +0000 (+0200) Subject: usb: musb: ux500: set dma config for both src and dst X-Git-Tag: firefly_0821_release~3680^2~4551^2~7^2^2~7 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=d366d39bab562545ccb4a5931d62d0fd9e6a8ffc;p=firefly-linux-kernel-4.4.55.git usb: musb: ux500: set dma config for both src and dst The dma driver requires both src and dst to be set. This fix is needed in order to run gadget mass storage. Patch is verified on snowball. Signed-off-by: Per Forlin Acked-by: Mian Yousaf Kaukab Acked-by: Linus Walleij Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index cecace411832..23134754b7c0 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -133,15 +133,13 @@ static bool ux500_configure_channel(struct dma_channel *channel, DMA_SLAVE_BUSWIDTH_4_BYTES; slave_conf.direction = direction; - if (direction == DMA_FROM_DEVICE) { - slave_conf.src_addr = usb_fifo_addr; - slave_conf.src_addr_width = addr_width; - slave_conf.src_maxburst = 16; - } else { - slave_conf.dst_addr = usb_fifo_addr; - slave_conf.dst_addr_width = addr_width; - slave_conf.dst_maxburst = 16; - } + slave_conf.src_addr = usb_fifo_addr; + slave_conf.src_addr_width = addr_width; + slave_conf.src_maxburst = 16; + slave_conf.dst_addr = usb_fifo_addr; + slave_conf.dst_addr_width = addr_width; + slave_conf.dst_maxburst = 16; + dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, (unsigned long) &slave_conf);