From: Jesse Barnes Date: Tue, 17 Apr 2012 22:06:33 +0000 (-0700) Subject: drm/i915: IBX+ doesn't have separate vsync/hsync controls on the VGA DAC X-Git-Tag: firefly_0821_release~3680^2~2315^2~56^2~30 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=df0323c42ac35f81b49e25fe04e8e52b9c6f6467;p=firefly-linux-kernel-4.4.55.git drm/i915: IBX+ doesn't have separate vsync/hsync controls on the VGA DAC When the PCH split occurred, hw dropped support for separate hsync and vsync disable in the VGA DAC. So add a PCH specific DPMS function that just uses the port enable bit for controlling DPMS states. Before this fix, when anything other than a full DPMS off occurred, the VGA port would be left enabled and scanning out while all the other heads would turn off as expected. v2: duplicate encoder helper vtable into pch and gmch versions (Daniel) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48491 Reviewed-by: Chris Wilson Signed-off-by: Jesse Barnes [danvet: s/intel_crt_dpms/gmch_crt_dpms as suggested by Chris.] Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 70b0f1abf149..0976137ab79a 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -55,18 +55,36 @@ static struct intel_crt *intel_attached_crt(struct drm_connector *connector) struct intel_crt, base); } -static void intel_crt_dpms(struct drm_encoder *encoder, int mode) +static void pch_crt_dpms(struct drm_encoder *encoder, int mode) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 temp, reg; + u32 temp; - if (HAS_PCH_SPLIT(dev)) - reg = PCH_ADPA; - else - reg = ADPA; + temp = I915_READ(PCH_ADPA); + temp &= ~ADPA_DAC_ENABLE; + + switch (mode) { + case DRM_MODE_DPMS_ON: + temp |= ADPA_DAC_ENABLE; + break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_OFF: + /* Just leave port enable cleared */ + break; + } + + I915_WRITE(PCH_ADPA, temp); +} - temp = I915_READ(reg); +static void gmch_crt_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 temp; + + temp = I915_READ(ADPA); temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); temp &= ~ADPA_DAC_ENABLE; @@ -85,7 +103,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode) break; } - I915_WRITE(reg, temp); + I915_WRITE(ADPA, temp); } static int intel_crt_mode_valid(struct drm_connector *connector, @@ -516,12 +534,20 @@ static void intel_crt_reset(struct drm_connector *connector) * Routines for controlling stuff on the analog port */ -static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = { - .dpms = intel_crt_dpms, +static const struct drm_encoder_helper_funcs pch_encoder_funcs = { + .mode_fixup = intel_crt_mode_fixup, + .prepare = intel_encoder_prepare, + .commit = intel_encoder_commit, + .mode_set = intel_crt_mode_set, + .dpms = pch_crt_dpms, +}; + +static const struct drm_encoder_helper_funcs gmch_encoder_funcs = { .mode_fixup = intel_crt_mode_fixup, .prepare = intel_encoder_prepare, .commit = intel_encoder_commit, .mode_set = intel_crt_mode_set, + .dpms = gmch_crt_dpms, }; static const struct drm_connector_funcs intel_crt_connector_funcs = { @@ -567,6 +593,7 @@ void intel_crt_init(struct drm_device *dev) struct intel_crt *crt; struct intel_connector *intel_connector; struct drm_i915_private *dev_priv = dev->dev_private; + const struct drm_encoder_helper_funcs *encoder_helper_funcs; /* Skip machines without VGA that falsely report hotplug events */ if (dmi_check_system(intel_no_crt)) @@ -602,7 +629,12 @@ void intel_crt_init(struct drm_device *dev) connector->interlace_allowed = 1; connector->doublescan_allowed = 0; - drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs); + if (HAS_PCH_SPLIT(dev)) + encoder_helper_funcs = &pch_encoder_funcs; + else + encoder_helper_funcs = &gmch_encoder_funcs; + + drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs); drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); drm_sysfs_connector_add(connector);